Set box

Similar Questions

• How to use a rollover image and click set box?

  I have three flight path images which need to be clicked to access the other slides.  How can I use them together?  It seems that the rollover image replaces the click box.

  Of course! I always make things more difficult than necessary.  It works exactly as required.  Thank you.

• Reception-records-setting box in place 2 incorrectly. MSGE instead of Msge. Received & facebook instead of Facebook. How can I change them?

  Redo?

  Right click > rename
  Of course, this assumes Outlook since you have not provided any information.

• I'm trialing CC but don't want CS6 set as my default programs. Why can I not set (box) CS5 as default?

  I'm on a Windows 7 computer with an installed version of Adobe CS5 Premium. I'm trialing cloud creative and downloaded InDesign CS6. I don't want that it is my fault, however. I tried to adjust CS5 as my default, but my computer will not allow that and keeps returning to CS6 as default. Several colleagues have a non-Cloud of the CS6 version and have no problem pointing to their default values, which makes me wonder if it is a question related to the cloud. Known solutions or issues known at least?

  What is the extension of the file you are trying to open this file actually appeared with CS5 Id and in what version?

  Just to be safe, check if you have followed the same steps mentioned in the screenshots below.

  

  

• Filter > esthetics > box setting to find the edges went

  I went to use the filter to find the edges and it changes just the image without offering the setting box. How can I get it back?

  Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02 / 07:23:00:00) x 64

  woof2006 wrote:

  I went to use the filter to find the edges and it changes just the image without offering the setting box. How can I get it back?

  Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02 / 07:23:00:00) x 64

  I think R_Kelly is right.  You have confused two things.  Find edges never provided a setting dialog box, while the fluorescent contours (but it is limited to 8-bit documents).

  What version did you thought an adjustment provided to find the edges?  Just to be sure, I just checked several older versions and as expected find edges did not provide for any adjustment at all in one of them.

  -Christmas

• create the boxed set cover

  How to create a cover of book set box for a web page?

  Can you provide a link that will give us an idea what you are after?

• I messed up my resolution-how to make it back to the original setting?

  I tried to go the resolution setting box, but the button apply is not visible. I can change but not to apply the change?

  After you move the slider to the desired resolution, press Enter- key, which must function as clicking the OK button.

  Kind regards

• How can I change the size of the updated Adobe Flash Player box?

  Hello.

  So, I just got a new laptop (Lenovo Yoga Pro 2) and Adobe Flash Player Setting box that appears is only 4 cm x 2.5 cm on my screen, which is barely readable. My youtube at the bottom of each video loading bar is also abnormally narrow (my cursor is about twice the size of the play symbol). I think that the two may be related. If someone could help fix me these two question that would be wonderful.

  Thank you!

  Hi Jean-Luc.

  It's bug 3931405https://watsonexp.corp.adobe.com//#bug=3931405> Express Install/Badge install dialog tiny windows in hi resolution monitor (3200 x 1800)

  I don't know if there is an external bug for it.

  --

  Maria

• How to set the length of titles?

  How to set the length of titles? The setting box has no such settings. Thank you.

  With the title on the timeline, expert Mode, just a click + drag on the tail (or head) of the title, in order to extend the duration. I would also like to open the information panel, so that I can see exactly this change in length.

  Good luck

  Hunt

• CTRL + L does not arise levels box?

  The CTRL + L shortcut is popping up is no longer the levels dialog. So, I tried to access the levels through lighting Enhance-set box and jump not upward in this way either. Do the two ways to get the same result, it goes to the sample point function, and once it does I can't out of it. That's happened? It just started doing this last week it worked fine. Help, please? I even uninstalled components and installed again and it still doesn't work.

  Thank you!

  Hello, is it possible that the dialog box is outside the visible area of the screen? You can try to reset your workspace in windows > workspace > reset (...)

• Support iPhone 5 and LTE

  Original factory unlocked iphone 5 (A1428 ME486LL/A model), ios 7.1.1. Under parameter/boxes, there is only the option "enable 3G". With a LTE of Ting/T-mobile SIM card, it can support 3 g. T-mobile site, they say that they support this iphone data 5. Should I do to support the LTE on this phone? Everywhere where I was watching suggested that I see an "enable LTE" under setting/boxes, but I didn't do it.

  More that likely, the model you own does not support bands LTE being used by your company.

  See this list: http://www.apple.com/iphone/LTE/

• Cannot use MSN Photo Upload on HP Pavilion Dv6

  Original title: "Hi uses hp pavillion dv6 64 bit vista and I load msn photo upload control cannot tell me the solution please what I need to do" ".

  Hi uses hp pavillion dv6 64 bit vista and I can not msn photo upload tŽlŽcommande tell me the solution please

  Here are some instructions I found courtesy of James Donnelly MVP:

  > > Microsoft Photo upload tool is an active X control. If your maybe problem
  > > you have a popup problem or a firewall that does not allow you to download
  > > This or if you have a corrupted file. Try the following.
  > >>
  > >>
  > >>
  > >>
  > >>
  (> > 1) make sure your AV program is updated and run scan. Then update your
  > > spyware programs and run these. See http://tinyurl.com/7uaob if you do not have
  > > have these.
  > >>
  (> > 2) Close all programs and browsers. Do not open unnecessary windows
  > > while doing the following.
  > >>
  (> > 3) click Start > Control Panel > network and Internet >
  > > Internet options
  > >>
  (> > 4) you should see the window on the general tab. On the temporary Internet files.
  > > Delete all cookies, delete files. Then go to settings > display the file and
  > > highlight those which have not been removed in the temporary Internet
  > > Files. Close this window.
  > >>
  (> > 5) now you should still see the general > setting box. Click then on the
  > > View objects that should open the C:\WINDOWS\Downloaded program. Remove the MSN
  > > Photo upload tool and the selection of Photo MSN tool file. You do not have the two
  > > or one of them. Now close this window.
  > >>
  (> > 6) now you should still see the general > setting box. Check the
  > > "Automatically" on the "check for newer version of stored pages:" click on
  > > OK
  > >>
  (> > 7) now, you are still in the box Internet options general tab, click
  > > Security tab in the upper part. Select trusted sites and click sites
  > > button. Uncheck the require a secure server (https :) then add it)
  > > more http://*.msn.com,http://*.microsoft.com so keep these
  > > settings bore you, then later you can remove them after getting the MSN
  > > upload tool loaded. Press the close button.
  > >>
  (> > 8) now highlight the world of the Internet and hit the button custom, to the
  > > Internet under ActiveX controls and plug-ins settings box: look for them
  > > following "" auto "to apply for ActiveX controls, see disable or"
  > > guest.
  > > "Download signed ActiveX controls", quickly check.
  > > "Download unsigned ActiveX controls", a check to disable or ask.
  > > ' Initialize and script ActiveX controls not marked as safe: "check Disable
  > > or command prompt.
  > > "Run ActiveX controls and plug-ins", check Enable.
  > > "Script ActiveX controls marked safe for scripting", check Enable.
  > >>
  (> > 9) now click on the OK button. Don't forget he not cancel or reset button. If
  > > you think you may have made this error go back and reset them. Click OK
  > >>
  (> > 10) Restart your computer.
  > >>
  (> > 11) Turn off all your popups blockers and try again. If you still have the
  > > problem and then repeat steps 2 through 5 and restart the computer. Then turn off popups blockers and
  > > firewall before you try to download MSN Photo Upload Tool.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DPI probems

  I adjusted my DPI to a size that makes printing & larger icons.  I want to change that, however, the method of customization won't work b/c, the screen resolution setting box is so great that the apply/OK button does not work.  I tried to drag and drop the box, most of the lower half shows, but I moved it as high as I could & it does not always show the apply/OK button.

  Thank you.

  Have you tried this way? .....

  Right-click on a free space of the desktop > customize > adjust font size (DPI) > check default scale (96 DPI) > OK

  t-4-2

• Cannot publish in the areas since the update!

  Hello

  Since updated 2.0 2015 MUSE its impossible to publish it, NOW for the 2 Sites!

  Name of the site is not displayed in the setting box published and: site Curently associated is not available! (see photo)

  

  We tried the suggestion of troubleshooting many times - we load the old MUSE program.

  NOTHING IS THERE FACT!

  What can do us?

  Please Urgent!

  Greetings

  Dierk

  I have exactly the same problem. Tried both sites with two different accounts of BusinessCatalyst. The problem remains, and could not be repaired. In any case, I managed to get my sites updated by using the previous version of Muse. It is certainly a bug in update of Muse.

  

  In short, do your updates using the previous version.

  Best regards

  Lasse

• How configure tabbed pages to print correctly?

  HI -.

  The pdf more complex that I have ever met (and harder than I ever searched on this forum) contains the TABS.  I don't want by tabs tabs in the window tab index, tab indents, paws on setting preferably, dialog boxes the tabs in the menu or the tabs in the browser.

  The tabs, I ask those who are labeled "flaps" are protruding along the right edge of a printed document in order to facilitate the location of specific sections in the printed document.  Text is printed on the tabs rotated 90 degrees.  The paper on which the tabs are printed is generally a thicker and, by necessity, is WIDER THAN TYPICAL 8.5 "-so that the tab comes forward on the right edge of the printed document."  The text rotated (the legend of the tab) must be beyond the 8.5 width "to be visible in the tab when the book is bound.

  I hope that I have not insulted anyone with my description, but I felt it necessary because "tabs" gives no relevant search results as well.  Now to my situation and the question.

  The PDF I'm faced with a total of 300 pages, and 12 of them are tablets - to be printed on a tab.  The legend of the tab is already turned properly and positioned on the page where the tab should stay ABOUT - with the exception of one of the key issues.  The problem is that the widths of the PDF pages that will be the tabs are 8.5 "wide on the screen and the stock of tab to be printed on is 9" wide.  The question is how the legend to print beyond this page 8.5 "wide?

  I use a Canon varioPrint 135.  It's a production machine pretty hefty with trays for different media sizes.  So I put the paper in the Tray 1 and the stock of tabs in tray 2.  The result is that the stock of tabs is inserted where there should be some simple pages but the legend of the tab is not printed in position on the tab but about. 35 "on the left.  In other words - the printer has correctly interpreted the PDF page width is 8.5 "printed in this width, even if she was instructed to use and well connected, a paper stock that is 9" wide.

  As I see it - the solution is to expand those tab pages in the PDF so that the printer can see 9 "wide and print the Legend tab accordingly on the Media 9".  Is it a correct assessment?

  What tool Acrobat, functionality, software, plug-ins or setting should I use to change the width of pages in a PDF file?  Is it still possible to do this with Acrobat?

  Thanks in advance for your comments.

  Josh

  Hi Josh, this should be pretty easy to do - however, due to a bug in Acrobat, it's a two-step process:

  Open the document in Acrobat and implement the tool 'Set Page boxes' (via Tools > organize Pages > Set Page boxes, or by right-clicking on a page in the "Thumbnail" pane and selecting "Crop pages"). Select this option to change the size of the page using a custom size. Make sure that you select "Center" to the old page to the new, larger page and specify 9.5 "x 11" (Yes, it's too big, and we will correct it in the next step):

  

  Now apply this change to your tab page and set up the tool "Set boxes Page" again. This time, we change the culture box so that only the 9 x 11 "page - with the text of the tab in the right position - shows:

  

  To get the correct size, remove 0.5 "from the right edge.

  Again, apply the settings, and you should have a page of tabs correctly formatted and size.

  The bug in Acrobat, it's that you cannot specify a x_offset custom in the first step. This would allow us to just resize the page to 9 x 11 "and the offset of 0.5" and make, but which moves the contents of the page completely outside the clipping rectangle, and you end up with a blank page.

  I extract all pages in tabs in a separate document and then perform these two steps on pages in the temporary document and then replace the existing tabs in the corresponding pages of this temporary document.