set the session for a user
Hello10g R2, can we set a session for a user setting permanently?
I mean to avoid running the following command-line at the beginning of each session:
ALTER session his_parameter = somevalue;
Thank you.
Hello
The only way I know to do is to create a logon trigger that performs the command 'alter session.
Liron Amitzi
Consultant senior s/n
[www.dbsnaps.com]
[www.orbiumsoftware.com]
Tags: Database
Similar Questions
-
Hello!
-A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--
I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...
Any help is appreciated. If I was not specific enough, I can specify in comments.
Thank you!
Hello
You must make a password reset disk before that there are problems with a password, not afterwards.
________________________________________________________________
Read this for your problem:
http://support.Microsoft.com/kb/940765
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
_____________________________________________________________
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
-
I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account, how can I fix this means if someone knows how to fix teas pleas answer me quickly I have to work
Logging in as an admin account, then reset the password for the account of the problem.
-
I create the reset disk of password on another laptop, because the other laptop I forgot the password. There is solution in another thjred saying to open cmd, but I can't open it because there is no password to access. But I have another account which is a guest account, then maybe I can reset the password to the guest account? (no internet in the guest account)
Hello
You cannot create a reset disk of password on another computer to another computer where you have forgotten your password.
You create a password reset disk on your computer in case, and before that you have forgotten your password, not after that you forget it.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk
@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it is not applicaple, you need to reinstall the operating system.
"What to do if you forget your Windows password"
http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
-
Setting up passwords for new users
I am the Admin of my group. How to create a new user account (for other users) that accepts a default password (an I put) then ask to set up a new password?
I don't have access to all the operating systems that are past their support life, but I thought that he used the same under Windows 7. Can you type net help user and see what it shows options available? Maybe Vista doesn't.
Here are the options I want.
NET USER
[username [password | *] [options]] [/ DOMAIN]
username {password | *} / add [options] [/ domain]
username [/ delete] [/ domain]
username [/ TIMES: {both |}] ALL}]NET USER creates and modifies the user accounts on computers. When it is used
without switches, it lists the user accounts of the computer. The
user account information is stored in the user accounts database.user_name is the name of the user account to add, delete, modify, or
view. The name of the user account can have as much of as
20 characters.
password assigns or changes a password for the user account.
A password must meet the minimum length set with the
/ The command NET ACCOUNTS MINPWLEN option. It can have as
up to 14 characters.
* Produces a prompt for the password. The password is not
displayed when you type it at the password prompt.
/ DOMAIN performs the operation on a domain controller of
the current domain.
/ ADD Adds a user account in the user accounts database.
/ DELETE Removes a user account from the user accounts database.The options are the following:
Description of options
--------------------------------------------------------------------
/ ASSETS: {YES |} NONE} enables or disables the account. If
the account is not active, the user cannot
access to the server. The default value is YES.
/ HOW: 'text' provides a descriptive comment about the
the user's account. Surround the text in
quotes.
/CountryCode:nnn uses the operating system country code to
implement the language files specified for a
helps the user and the error messages. A value of
0 means the default country code.
/ EXPIRES: {date |} NEVER} causes the account to expire if date is
set. NEVER sets no time limit on the
account. An expiration date is in the
form mm/dd/yy (yy). Months can be a number,
statements, or abbreviated with three
letters. The year can be two or four digits.
Use forward slashes (/) (without spaces) to separate the
parts of the date.
/ FULLNAME: "name" is the full name of the user (rather than a
(username). Place the quote name
mark.
/HOMEDIR:pathname sets the path for the home directory of the user.
The path must exist.
/ PASSWORDCHG: {YES |} NO} Specifies whether users can change their
password. The default value is YES.
/ PASSWORDREQ: {YES |} NO} Specifies whether a user account should have
a password. The default value is YES.
/ LOGONPASSWORDCHG: {YES |} No.} Specifies whether users must change their
password at the next logon. The default value is no.
/ PROFILEPATH [: path] defines a path to the logon of the user profile.
/SCRIPTPATH:pathname is the place of the user logon
script.
/ TIMES: {both |} ALL} this is the logon hours. TIME is expressed as
day [-day] [, day [-day]], time [-time] [, time]
[- time]], limited to increments of 1 hour.
Days can be specified or abbreviated.
Hours may be the rating of 12 or 24 hours. For
12-hour notation, use am, pm, a.m.., or
h ALL, a user can still log on.
and an empty value indicates a user can never
Open a session. Separate the date entries, time with
a comma and split several day and time
entries with a semicolon.
/ USERCOMMENT: 'text' Add or edit the user allows an administrator
Comment for the account.
/ Workstations: {computername [,...] | *}
Lists up to eight computers of
which a user can connect to the network. If
/ Workstations has no list or if the list is *,.
the user can log in from any computer. -
[ADF, JDev12.1.3] How/where to set the session timeout
Hallo,
After a few minutes of inactivity, the browser displays a message to inform that the session is not more active and only OK been must be clicked to refresh the page.
If a dialog box "btf" has been opened on the left, it becomes...
I would like to know what is the right place/method to set a deadline.
If possible I would like that when the timeout checks, the application performs a redirect to a page I like (for example the login page).
The application of ADF Essentials and is deployed to the GlassFish application server.
My concern is... what should happen to the open operation / pending when the time-out occurs?
For example, the user is modifying an af:table but it has not clicked validate or cancel...
Thank you
Federico
I would like to know what is the right place/method to set a deadline.
For java web applications, you can set the session timeout in the web.xml file. (this is the global settings associated with all sessions)
If you wish, you can set the timeout of session by program (and this is related only to the current http session).
If possible I would like that when the timeout checks, the application performs a redirect to a page I like (for example the login page).
http://fortunefusionminds.blogspot.com/2014/04/how-to-redirect-to-custom-page-whenever.html
ADF: Session expires management redirect to login page | Bungbutan
ADF developers World: Detection and handling of user session expiry
My concern is... what should happen to the open operation / pending when the time-out occurs?
Well, session is destroyed, it will destroy all instances of AM and do rollback.
Dario
-
have been unable to install the driver for some users. We do not receive the following error message.
Error: 0 x 00000006
Hi Sameer,
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are getting an error code.
I would like to know some information.
You are connected to a domain network?
When exactly do you get this error code?
Do you also have any error message?
This problem may occur if the print spooler service is stopped.
To start the spooler service, follow these steps:
1. click on Startand then click Control Panel.
2. double-click Administrative Toolsand then click Services.
3. double-click on the Printer Spooler service and then change the startup type to Automatic. This option sets the spooler service starts automatically when you restart the computer.
4. If you want to start the spooler service immediately, click Start in the area of The State of the Service .
I would also refer to the Microsoft Help Article below and check if that helps.
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
I'm installing Horizon Mirage 5.1 server on a Windows Server 2012 R2 VM management. The SQL is located on a Server R2 VM with SQL 2012 2012. We have created a Mirage service account that has permissions of db_creator on the SQL Server. When we run the installation wizard we get the "unable to validate the permissions for this user account. Unable to connect to the database. The control server name, the name and server instance parameters"error message. We tried to make the local admin of the SQL server service account and the Mirage Mgmt server. We tried you identifying as service account and by running Setup in this way. Windows Firewall is disabled on both virtual machines. When we enter the SQL Server name and the instance use < servername > without an instance because it is an unnamed instance. Does anyone have other ideas? Cannot find much out there for KB articles. I'll open evidence of the support if it takes too long to understand.
The service account, we created had a "database default" set in SQL. We chose the database and he continued as planned.
-
query not using the index for some user
Hello
I have a query that is running in less than a second for sys, system, or schema owner. However, another user (test_user) take 30 seconds to run the same query.
I certainly dba and privileges identical to test_user as schmea_user, but the result is the same.
I checked
Select * from V$ SYS_OPTIMIZER_ENV;
Both are the same for both users.
I have check the plan to explain to both users. I noticed that for sys/system/schema_owner, the query uses an index, but not the test_user.
All have experience the issue where a user uses an index, but not the other?
Thank you for any assistance.Thank you for the display of formatting output, this output is much easier to read.
One of the first things you notice about the execution plans that is for the owner non-schema "SQL_ID, 0wcs85uywn72m, number of children 1" appears in the output of DBMS_XPLAN, while "SQL_ID 0wcs85uywn72m, child number 0" (the same SQL_ID but a different number of child) appears for the schema owner. "" Whereas the SQL_ID is the same, which indicates that the client requires exactly the same SQL statement, so it's a good start.
Then, note that in the predicate for the nonschema owner information section the following appears (sometimes with the order of the two conditions switched in position) as a condition placed on each table that is available in the schema:
filter(("SEAL_FLAG" IS NULL OR "SEAL_FLAG"'Y'))
The above suggests the presence of the virtual private database (or a superset of private database virtual) generated the predicates. You should be able to confirm that this is the case by querying V$ VPD_POLICY using the SQL_ID which was displayed in the DBMS_XPLAN output:
SELECT * FROM V$VPD_POLICY WHERE SQL_ID='0wcs85uywn72m';
As a test, I made a few minor adjustments to the example on this page:
http://Antognini.ch/2011/09/optimizer_secure_view_merging-and-VPD/
I changed the name of T to T12 and TESTUSER table specified for the schema names. I then created the function S of this page as follows:CREATE OR REPLACE FUNCTION s (schema IN VARCHAR2, tab IN VARCHAR2) RETURN VARCHAR2 AS BEGIN RETURN 'ID < 10'; END; /
I then added a couple of lines in the T12 test table:
INSERT INTO T12 VALUES (1,1,NULL); INSERT INTO T12 VALUES (4,1,NULL); INSERT INTO T12 VALUES (10,1,NULL); INSERT INTO T12 VALUES (12,1,NULL); COMMIT;
With an active 10053 trace, I executed the following SQL statement:
SELECT id, pad FROM t12 WHERE spy(id, pad) = 1
The SQL_ID (in my case, found in the 10053 trace file) was 6hqw5p9d8g8wf, so I checked V$ VPD_POLICY to this SQL_ID:
SELECT * FROM V$VPD_POLICY WHERE SQL_ID='6hqw5p9d8g8wf'; ADDRESS PARADDR SQL_HASH SQL_ID CHILD_NUMBER OBJECT_OWNER OBJECT_NAME POLICY_GROUP POLICY POLICY_FUNCTION_OWNER PREDICATE ---------------- ---------------- ---------- ------------- ------------ ------------ ------------------------------ ------------------------------ ---------------------- ------------------------------ ------------------------------------------------------------------------------------ 000007FFB7701608 000007FFB7743350 1518838670 6hqw5p9d8g8wf 0 TESTUSER T12 SYS_DEFAULT T_SEC TESTUSER ID < 10
As noted above, the VPD test function named S added the predicate "ID".< 10"="" to="" the="" sql="">
There are not many clues in the 10053 trace file in my test VPD generated additional predicates. Trace the following was found shortly after the beginning of the file (this is the SQL statement initially presented):
----- Current SQL Statement for this session (sql_id=6hqw5p9d8g8wf) ----- SELECT id, pad FROM t12 WHERE spy(id, pad) = 1
I searched then down in the trace for final after changes query file (to be noted that this sentence could be slightly different in different versions of database Oracle). That's what I found:
Final query after transformations: ******* UNPARSED QUERY IS ******* SELECT "T12"."ID" "ID","T12"."PAD" "PAD" FROM "TESTUSER"."T12" "T12" WHERE "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10 kkoqbc: optimizing query block SEL$F5BB74E1 (#0)
Note that the final query after transformation shows how the final version of the query that has been rewritten by the query optimizer before the SQL statement has been executed and this version of the query includes AND "T12". "" IDENTITY CARD ".<10. if="" i="" was="" attempting="" to="" determine="" how="" that="">10.><10 predicate="" was="" added="" to="" the="" sql="" statement,="" i="" would="" start="" at="" the="" "current="" sql="" statement="" for"="" line="" in="" the="" trace="" file="" and="" search="" down="" the="" trace="" file="" for="">10><10* -="" in="" this="" case,="" the="" following="" is="" what="" i="" found="" as="" the="" first="" search="" result,="" very="" close="" to="" the="" "current="" sql="" statement="" for"="" line="" in="" the="" trace="">10*>
************************** Predicate Move-Around (PM) ************************** PM: PM bypassed: Outer query contains no views. PM: PM bypassed: Outer query contains no views. query block SEL$F5BB74E1 (#0) unchanged FPD: Considering simple filter push in query block SEL$F5BB74E1 (#0) "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10 try to generate transitive predicate from check constraints for query block SEL$F5BB74E1 (#0) finally: "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10
As can be seen from the above (because the predicate again appeared before and after the line containing the word "Finally: '), the AND"T12 ". "" IDENTITY CARD ".<10 predicate="" was="" already="" added="" to="" the="" original="" sql="" statement="" by="" the="" time="" the="" predicate="" move-around="" section="" of="" the="" trace="" file="" was="" written,="" and="" that="" is="" the="" first="" mention="" of="">10><10 in="" the="" trace="" file.="" in="" your="" case,="" you="" would="" search="" the="" 10053="" trace="" file="">10>
"SEAL_FLAG" IS NULL
If V$ VPD_POLICY revealed that there are virtual private database (VPD) generated predicates applied to the SQL statement, take a look at the following article in the Oracle documentation library:
http://docs.Oracle.com/CD/B28359_01/network.111/B28531/VPD.htmThis article lists the different points of view, who can be interviewed to learn more about the VPD rules which are in force in the schema. For example, with my SPV test:
SELECT * FROM ALL_POLICIES; OBJECT_OWNER OBJECT_NAME POLICY_GROUP POLICY_NAME PF_OWNER PACKAGE FUNCTION SEL INS UPD DEL IDX CHK ENA STA POLICY_TYPE LON ------------------------------ ------------------------------ ----------------------------- ------------------------------ ------------------------------ ----------------------------- ------------------------------ --- --- --- --- --- --- --- --- ------------------------ --- TESTUSER T12 SYS_DEFAULT T_SEC TESTUSER S YES YES YES YES NO NO YES NO DYNAMIC NO
He knows performance issues related to the use of VPD, some of which are Oracle Database version-dependent, and some have been fixed in recent versions. Take a look at the following articles if you have access to My Oracle Support:
MetaLink (MOS) Doc ID 728292.1 ' known performance problems when you use transparent encryption data and indexes on the encrypted columns.
MetaLink (MOS) Doc ID 967042.1 "How to investigate Query Performance regressions Caused by VPD (FGAC) predicates?"You might find working through the second of the above that the problem is caused by a bug in database Oracle.
On a side note. Execution plans you have published include the 0 value in the column starts many of the operations in the execution plan. 0 indicates that the operation never actually executed. A 0 is included in the column starts on the line that includes the FULL ACCESS of TABLE of PEOPLE_TRANSACTIONS at least to the OPC. Value 123, a full table of PEOPLE_TRANSACTIONS table scan PROPERTY_CONTAINER_ID was not actually performed.
Charles Hooper
http://hoopercharles.WordPress.com/
IT Manager/Oracle DBA
K & M-making Machine, Inc. -
How to change the password for all users in the database
Hi buddies!
Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.
Thank you.
Nith
Published by: user645399 on March 1, 2011 14:23Write the file spooling
asMake sure that all profiles has password_verify_function with a NULL value
then
Select 'edit user' | username: ' identified by
;' from dba_users; you will get the output... you just run.
-
How to set the password for HARD drive?
Hello
Could someone help me please by setting the password for TOSHIBA STOR. E ART 3 (1 TB 2.5 ") HARD DRIVE?
Hello
I n t have this external HARD disk, but Toshiba pre-installed some additional software on this subject for the creation of HARD drive password?
-
How to set the clock for the hours, minutes, and seconds with Windows XP
How to set the clock for the hours, minutes, and seconds with Windows XP
I don't know of your question. If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light". Windows will not natively display the seconds.
TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >
HTH,
JW -
Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?
Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?
Hello Pidcock,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that you want to change on your computer sleep timer. I'll be happy to answer that question for you. Now you have not specified what operating system you are using, so I guess it's the same operating system provided with your computer (Windows 7). I will provide you the HP support document: Management of power (Windows 7 and Vista) Options, which will guide you in how to set the power of your laptop. Just in case you have upgraded to Windows 8 I am also including the HP Support document: Manage the power (Windows 8) Options. This document will guide you through the same steps in Windows 8.
I hope that I have answered your question to your satisfaction. Thanks for posting this question on the Forums of HP. Have a great day!
-
How can we get the details of the traffic for the spaces for example, users access report by space (for all users), DB tables can be used to get information, such as for example: users who have logged in - never
You can use analytics. WebCenter Analytics comes with a number of events out-of-the-box for which it brings together measures which are very useful.
You can check in the WebCenter Analytics database schema. WebCenter Analytics Dashboards are present in the scheme of ACTIVITIES and are modeled in the form of a star schema.
The schema includes 2 types of tables. FACTS analytical tables are used to store instances of specific events. For each event, a specific FACT table is present, for example for page views, the views of space, connections and so on. These tables contain a timestamp for the moment, that the event is occurred and integer ID these descriptive reference data stored in DIMENSION tables.
DIMENSION tables contain descriptive information about the entities associated with events. Size examples are pages, applications, groupspaces, users and so on.
See the details of the table all the under http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_app_aschema.htm#JPSDG10767
If you want to custom event.that track, as you can get. see this blog entry
Quobell technology - portal WebCenter: WebCenter Analytics: define and save custom events
-
How to set the color for background ChoiceBox point to ChoiceBox with css?
How to set the color for background ChoiceBox point to ChoiceBox with css?
I need to change the backgound color list items.
I tried with the following code, but it's not help to:
{.context-menu .choice-box
-fx-background-color: Red;
}
.choice-box .menu-item {}
-fx-background-color: red;
}
In Java 8, either of your selectors should work.
In Java 7 (JavaFX 2.2), you need of the following workaround:
#choice-box-menu-item { -fx-background-color: red ; }
Maybe you are looking for
-
Unable to play or download a recently purchased song
I bought a song on my iPhone 6s and I could play for a week. After that, he would still show on my reading list, but it would be directly. I deleted the song from my iPhone and tried to redownload it but impossible. Even went to the ITunes store o
-
When I try a search using my google toolbar it stops responding and when I open tools > Addons, a window pops up saying script is unresponsive, which is followed by firefox crashing. How can I fix it?
-
How to transfer files from CD - R disc for computer
importing files I have a cd - r disc I need to import information from. How can I get my computer to read the disc?
-
How can I print from my phone smart hp officejet 8600 window 7 64-bit
How can I print on my printer to my Android phone
-
Need help with an app that I created using BB appgenerator
Hello I have developed an application using the http://www.blackberryappgenerator.com/blackberry/ when I was testing this app on my alpha dev RSS feed device, I noticed the following: -in charge of the application landscape. Show content in landscape