setting the appropriate values of cpu for bb-cputab
I never fully understood how Big Brother uses the running time between (unix) operating systems to determine the values of the cpu.
Is there a form published to determine what the correct values must be defined for the file bb-cputab in BBHOME/etc/for more specific notifications?
as the CPU test is based on the average of the load. Usually, a THE of 1.00 is optimal (a 1.00 availability means 100 in BB jargon, the comma is removed). So by default, yellow is set to 150 and 300 red. By experience, he has been on these values, otherwise, if they were lower would be more false positives. That said, some operating systems (I think Solaris is like that), aggreate load average all processors and not the average, so if you have a 4cpu server, yellow must be red and 600-1200. make sense?
Tags: Dell Tech
Similar Questions
-
When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?
Hi kevin7frg,
You can go to "file > create > scanner > configure presets PDF»
The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.
Hope that helps.
Kind regards
Ana Maria
-
How to set the threshold value for single tablespace in the 11g grid control
Hello
I want to set the threshold value for a single tablespace in the 11g grid control,
Please give me a navigation path.Sandy wrote:
Can you please give me the full navigation path?go to the target--> databases
Select the database that you want to set this alert to
Link select settings and policy settings -
<; af:valueChangeListener >; sets the new value back to the old value
Hi people,
I'm trying to implement a search bar with < af:inputText > and < af:selectOneListbox >.
When the user selects an item in the listbox control, the inputText will be updated. After hitting the "ENTER" key, the search action will be taken.
The valueChangeListener will be called when the selection of items in the listbox.
The problem can be described by the following two cases:
(1) the user types something in the inputText box and hitting 'ENTER' key for a search. The valueChangeListener is called and sets the value of the string user typed.
(2) the user selects something in the list box, each time changes the selection in the listbox control, the valueChangeListener will be called. But when the user presses the "ENTER" key, the valueChangeListener is still called, and it sets the return value to the old value. For example, the list has 'a ', ' b', 'c '. The user selects 'a', then 'b '. After hitting the "ENTER" key, the value in the inputText is replaced with "a".
The code is as follows:
Code in .jspx:
< af:inputText value = "#{pageFlowScope.word} '"
autoSubmit = 'true' immediate = "true".
valueChangeListener = "#{pageFlowScope.update}" / >
< af:selectOneListbox valuePassThru = "true" >
< f: selectItems value = "#{pageFlowScope.items}" / >
< / af:selectOneListbox >
Bean managed code:
publicvoid update (ValueChangeEvent event) {}
This.Word = event.getNewValue (m:System.NET.SocketAddress.ToString ());
}
I don't know how the valueChangeListener behaves like that.
Could someone provide me with clues or tips?
Thank you
Carl
Carl, tell us your version of jdev, please!
There is something wrong in your implementation. I do not see an inputText field who's value stored in a variable pageflowscope "word". This field has an attached valuechangelistener which is obsolete, because the field already stores its value in the variable pageflowscope. The same that you are trying to do in the valuechangelistener. So I don't see a selectonelistbox which does not store the value selected anywhere because it doesn't have the value property for it. There isn't an attached valuechangelistener so I wonder how your valuechangelistener is called at all when you change the selectoneListBox.
Timo
-
Extension of EO or CO to set the default values?
Hi all!
I spread an EO, ExtBankAccountsEOImpl, which contains the bank details of a provider.
When I create a new retail bank, I want to set the default value of some fields (for example the currency)
According to the nationality of the supplier (all fields are null by default oracle). See below.
Is this possible with EOs? Can the EO extended somehow get their hands on the party_id?
Or do I have to extend the CO instead?
Best regards
Christian
Christian,
Thus, your EO extension works very well, no?
You need to check the standard code (controller and methods of AM which is called by the CO) and see if the party_id is stored as part of the operation or not. If so, you should be able to get the values in extended OS.
If this isn't the case, you must extend the CO.
Note: Changes made by extension EO EO will affect all pages using the OS, if any other page exists.
I hope this helps.
See you soon
AJ
-
Mr President.
How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?
Concerning
For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html
You already have ways to use the sequence.
How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.
Thank you
-
How to set the return value of the method to the /outputText inputText field
Hello
How to set output return value method of a /outputText adf inputText field
Concerning
sevanan
Well put method's return value to a managed bean variable.
Create a variable in the bean and set the return value to this variable.
the inputText and outputTextValue to this managedBean.variable value
That's all...
and add partial trigger for inputText programmaticly
-
Call a method before the following operation to set the selected values
Use case: I display a VO as an ADF multiple checkbox select. This VO is the detail of a master/detail. I managed to store the selection state in a bean managed on autoSubmit. Then the user navigate to the record of the master, and then goes back to the previous record. The buttons next and previous were created using operations in data controls. I want to back up the State of the selection by clicking previous or next.
There are a lot of tutorial on how to get the selected values, but none on how to set the selected values. How would you do it?
11 GR 1 material JDev
What I ended up doing:
1 redefine listener action for the navigation buttons
{} public void nextQuestion (ActionEvent event)
saveSelectedState();
navigateQuestion ("Next");
restoreSelectedState();
}
{} private void navigateQuestion (string operation)
OperationBinding operationBinding = ADFUtils.findOperation (operation);
operationBinding.execute ();
}
2 Save and restore the selection state using bindings
Guava Multimap
Private ListMultimap
selectedIndices. private void saveSelectedState() {}
Get id question
DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");
Question of rank = questionBinding.getCurrentRow ();
Number questionId = (Number) question.getAttribute ("Id");
JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");
int [] valueIndices = listBinding.getSelectedIndices ();
selectedIndices.putAll (questionId, Ints.asList (valueIndices));
}
private void restoreSelectedState() {}
Get id question
DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");
Question of rank = questionBinding.getCurrentRow ();
Number questionId = (Number) question.getAttribute ("Id");
int [] valueIndices = Ints.toArray (selectedIndices.get (questionId));
JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");
listBinding.setSelectedIndices (valueIndices);
}
-
How to set the default value of the component selectOneChoice in the table to the ADF
Hi all
I use jdev 11.1.1.6.0 version.
I used an adf table in which an attribute is selectOnceChoice.
To create the table and selectOneChoice I used the data control java bean.
and drag and drop a table and after that I have drag and drop one of the attributes as selectonechoice and linked with the return of the method list as < key, value > pair.
I want the default value to select only one option in each attribute rows.
I checked with simillar issue on post next, but not yet resolved.
My jspx code is
<af:column id="c11" headerText="Invoice To" > <af:outputText value="#{row.invoiceTo}" id="ot19"/> <af:selectOneChoice value="#{bindings.invoiceTo.inputValue}" label="#{bindings.invoiceTo.label}" required="#{bindings.invoiceTo.hints.mandatory}" shortDesc="#{bindings.invoiceTo.hints.tooltip}" id="soc3" autoSubmit="true" valuePassThru="true"> <f:selectItems value="#{bindings.invoiceTo.items}" id="si4"/> </af:selectOneChoice> </af:column>
where invoiceTo is the table attribute and the invoiceTo attribute is dragged and dropped as a SOC function list Source data mapped data value with the List attribute
and the display attribute
Data value = invoiceTo List = lovMasterKey attribute
Display attribute = lovMasterValue
that list is maintained at < lovMasterKey, lovMasterValue >
According to the value of invoiceTo line, it should show as default value is selectOneChoice, but its showing no not as a default value.
Please, help me how set the default value of selectOneChoice in the table according to each value line invoiceTo.
Thank you all for the help on this issue.
Problem has been resolved.
Reason for this was used
It is solved using code used for the list built for selectoneChoice more
List lovMasterList = new ArrayList(); SelectItem siItem = new SelectItem(); siItem.setLabel(objAfCmnLovMasterListVO1.getLovMasterValue()); siItem.setValue(objAfCmnLovMasterListVO1.getLovMasterKey()); lovMasterList.add(siItem);
Now, I used the code where the line below. InvoiceTo is the key and row.invoiceToItems are the list of articles for selectOneChoice.
Thank you very much...
-
ODI 11 g | How to set the default value in the Interface mapping?
Hello
I m interpreting data OID of Oracle DB load target FOR Hyperion Essbase.
Its my requirement to set the default value for any size target source system it becomes same record for a specific column.
I thought that it would be fixed in the Interface, but I was not able to do.
Example:
Target Essbae Dimension
Size of account must have the value "FixAccount".
Dimension of the year must have the value "FY13.
Dimension of the view must have the value "ActiveView.
looking for your
Concerning
SherYes
-
How to set the default value of selectOneChoice
Hi all
I have two selectOneChoice (soc1 and soc2) in two respective pages with the same datacontrol. Now, I need set the default value of soc2 according to the value selected in soc1.
For example: -.
If the user has selected a value in soc1 say 'Bag' in the list then it must affect the default in soc2 as 'Bag' when loading the second page. The time as selectOneChoice was created using the same data contol.
How can I achieve this?
Please suggest.You can try with this?
Place curIndex pageflow scope and use
This.SOC2.SetValue (Integer.ToString (curIndex));
~ Abhijit
-
How to set the default value of a column from the value of the 2 columns given
Is it possible to set the default value for a column A, as the concatenated values of columns B and C of the create table statement itself without using the trigger.
for example, in a line, if column B is 'James' and column C is "smith" then the column has must be "james Smith".
in another line if column B is 'Bob' and column C is "Taylor" then column should be "Bob Taylor"
Thank you
YGYes, it is possible. But what is your version of the database? Try to use "virtual column. Search for a virtual column in the following link.
http://www.Oracle.com/technology/pub/articles/Oracle-database-11g-top-features/11g-schemamanagement.html
http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_7002.htm -
set the input value using a workflow setting?
Jdev 11... 2
I have a taskflow browse master / detail that called the edict taskflow passing parameters to a router that will either modify it or create method for the detail record (change/create master is in a different position). I can successfully modify/create the main form and I can change/create the detailed form, but I didn't understand how to set the input value for the agency_Id (of the master) in detail. I control data binding to create my detail record 'create', and I have a task flow parameter that has the agency_id I want as the default value in the detail. I don't know where to put the input value. I tried to add another method to the method call that has her 'create' binding for retail, but it seems that I can have only a single method. Do I need another method call to set it? Or should I do something programmatically? (I'm Javaless, so hopefully I can do declaratively).
Thanks much for any help. If I can figure out how to make this piece, I'll have the beginning of an application that does something useful.
LBHello
There is a new Createmethos called 'create with Params' that you can use for this.
http://www.Oracle.com/technology/products/jdev/tips/fnimphius/createWithParameters/createWithParameters.html
Simply plug the parameter to the variable of pageFlowScope containing the input parameter
Frank
-
How to set the default value in the select list to cascaded
Hello
I use Denes Kubicek cascade example list of selection http://htmldb.oracle.com/pls/otn/f?p=31517:119
And I want to give cascading the selection list with a default value. So, anyway, I use this application process:
< pre >
BEGIN
OWA_UTIL.mime_header ("text/xml", FALSE);
HTP.p ('Cache-Control: non-cache');
HTP.p ('Pragma: non-cache');
OWA_UTIL.http_header_close;
HTP.prn ("< select >");
HTP.prn ("< option value ="' | 1 |) "" > ' | '- all employees-' | ' < / option > ");"
FOR c IN (SELECT ename, empno
WCP
WHERE mgr =: cascading_selectlist_item_2)
LOOP
HTP.prn ("< option value ="' | c.empno |) '">' || c.Ename | ("< / option >");
END LOOP;
HTP.prn ("< / select >");
END;
< / pre >
How can I select for example empno default 1000?
Thanks in advance.
JacobJakob,
In this case, your default value is
HTP.prn (')
However, you can set the default value in the loop as you want. You just say that is your default - first, second, third...
In the list select ajax there's no submit and no calculation of values then I assuem your default is the punch one you wan to display when a selection list has been changed?
Denes Kubicek
-------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Opal-consulting.de/training
http://Apex.Oracle.com/pls/OTN/f?p=31517:1
------------------------------------------------------------------- -
How to set the property node maximum xscale for several scale XY Chart
Hello
I use a graph XY with three X axis and three scales of axis Y to draw the three sets of data. This works well.
What I do now is to set the Xscale.Maximum property node for one of the x-axis (the other two autoscale). If I click right in the (Create Blockdiagram; Node property; X scale; Maximum) I can not choose what x-axis I want to put the Maximum for.
So my question: how to select a specific axis allows you to set the XScale.Maximum property node when having several axes?
Thank you for your help, any suggestions are appreciated!
Hello
After some more research and experimentation, I found that using the scale property X Active I can determine/set for which the XScale.Maximum Xscale is used.
This solved my problem.
I hope someone else can save themselves a few hours with this thread!
Thank you
Maybe you are looking for
-
Lock screen pops out at random
While my iphone is in mode 'sleep', it will be very generally turn on the screen for a few seconds without doing anything. and this isn't a hardware problem, since I got it on 3devices. I have not seen all complaints online and im surprised. It can b
-
Sony Xperia Z3 network double Mobile is not available
Good evening, ladies and gentlemen. I have a problem with my phone, that's happened today. When I woke in the morning, I was out of signal. I had this problem on my old Mini Pro Xperia and restarted the phone and saw that I have signal. But even if I
-
Detect the finger leaves the scene
Hi all I have an object in my scene which can be dragged around. He listens to event mouse_down and begins after the mouse/finger on each mouse_move event until he recorded a mouse_up event. How can I detect when the user's finger leaves the side of
-
Bug in update Photoshop CC 2015.5
I am also having this problem with permissions. In addition, I can't solve how to make default jpg opening in PS.My Mac wants to open only in the preview, I tried to correct this use of get info and change the default to open with PS. onlyworks a lit
-
CC of Lightroom will not identify photos NEF (RAW) of my D500.
I use a MacBook Pro running El Capitan 10.11.5 and when I load the raw files in Lightroom it accepts them and then sends me a message that each file is unrecognizable form. I checked with others who do not seem to have this problem (Leigh at Snapchi