Settings - display - Daydream - Photo Frame

Similar Questions

• Digital photo frame displays horizontal pictures but look portrait on my phone.  How can I rotate easily?  Sorry, I'm new

  I use an iPhone 6 more to take pictures and when I load in my Nix, some horizontal display digital photo frame, but on the phone, they're looking at vertical.  How I see why they display horizontal and how do I turn the easily?  I did get a bit of work in PS but nothing is coherent.  I know PS is powerful but I'm new.

  I thank you,

  James B...

  I don't think that you can find in your phone. It's just something that detects where the phone is held, so that the display on the phone is still running correctly. I think your problem is that the image could have an auto rotation function, that tried to fill the frame.

  My image happened to have a size of 800 X 480 pixel, so I use the image processor to all my images at that size. I have an action which then resize the canvas of this size also with a black background. This prevents the framework of cropping images or turning, like the example below:

  

• Gigaframe L81 - probblem with a digital photo frame

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect. Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again. Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  Hello buddy

  Please do not be angry on me, but this is computer Toshiba systems support forum and this is certainly bad place for these issues. :(
  I just hope that you will find a s reading manual answer user you have gotten with this digital photo frame.

  Good luck!

• Browser will not display my photos or images

  I just activated my Motorola triumph yesterday, and everything has been works perfectly... except for the graphics/pictures in the internet browser. It does not display my photos or images, even when it shows that the page has "fully loaded." Graphics/photos work very well through the Facebook app and other apps, just not the browser. I've only tried simple solutions, like its rebooting, but I was not able to make it work.

  Anyone has any ideas for troubleshooting?

  Ok.

  Menu > settings > Applications > manage applications > all > browser > clear data

  Return or at home

  Try again.

  Let me know if this or does not help.

• Photo frame mode

  I've been using an old (1st generation) iPad as an electronic picture frame.  All I have to do to activate it is press the icon in the lower right of the lock screen and it starts and keeps going until I stop.  He was going to do the same with a newer gen iPad (I think it's the 3rd generation running the latest OS) and it does not work.  Is there a setting I'm missing that I need to activate?

  Photo Frame mode disappeared when the iOS 6a was introduced or when iOS 7A was introduced.

  If your iPad 3 is running on a version of the more recent than 5.1.1 iOS iOS this feature has disappeared.

  Now, there are photo frames digital, applications that you can download and install for free or buy you will actually have to run as an application to have your iPad act as a digital picture frame, now.

  The disadvantage of having to use an app, now, is that these applications of photo frame, is only will launch in the background when your iPad is sleeping or run from the lock screen any longer.

  I like and use Picmatic

  Picmatic - frame Digital Photo + music + clock by team Whiskey beavers.

  https://appsto.Re/us/V-DRJ.i

  Do a search on the iOS App Store for

  apps for digital photo frame

• CFPD 1000 photo frame

  Considering purchasing this model a little confusing, but finds the description of the size of the screen:

  "Screen size: LCD screen size: 10.1" (measured diagonally) visible image size real 9.1 "(mesuré en diagonale)" "

  What does that mean?

  Thank you.

  Hello and welcome to the Forums of Discussion of users.

  Sorry for all the descriptions of screen size could have confused you. Looking at the image of photo frame, the visible area (9.1 "measured diagonally) does not include the black border around the LCD (10.1" measured diagonally).

• Preparation fresh reinstall of Windows XP. Wish to save all settings display; computer desktop, taskbar to desktop, files, etc.

  Preparation fresh reinstall of xp.  Wish to save all settings display; computer desktop, taskbar to desktop, files, etc.

  Reinstalls previous, I had to do this through trial & error to get it the way I prefer it.  I tried to manually copy the display properties and then reset after reinstalling them, but sequence must be just right to get it the way I like it, & some steps is still missing

  THX

  First create a backup of your hard disk Image. If you then restore the image as you can.

  Free alternatives:
  EASEUS Todo Backup Home V3
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/

  ============================================================================

  How to make a backup of your registry: http://support.microsoft.com/kb/322756

  Can not say that restoring the registry will do what you want but the Image backup, you will have at your having previously worked copy of XP

  ============ Tweak UI ================================

  Try Tweak UI Power Toy from Microsoft: http://windows.microsoft.com/en-US/windows/downloads/windows-xpInstall,

  run and under logon, you will find checkboxes to select the accounts to display and automatic logon you can choose to enable/disable it by cheque or unchecking the "automatically connect" option.

  TweakUI is a tool very useful and relatively safe for most of the users because they
  don't need to use the registry editor or other methods less obvious to do
  changes to Windows.

  More details on the features available in Tweak UI:
  http://www.winxpsolution.com/Tweakuixppro.aspx

  J W Stuart: http://www.pagestart.com

• photo frames mini won't autostart

  I bought 4 Kaiserbass mini brand photo digital keychain to give parents like presents and I intend to put my own pictures on the photo frames before you give them as gifts. I connected one of them, who, after having followed the instructions, has connected to the computer and automatically the preinstalled software, introduced a window that allows you to download pictures on the key ring. Once I put the photos I want on the picture frame, I disconnected via the icon "Remove hardware" in the toolbar. I have connected the next photo frame, followed the instructions, but it is not pointing upwards and do not auto starts with the software preinstalled in the photoframe.

  I remember something similar happening once at work, where my usb storage device I had used several times in this computer, would suddenly does not start. A colleague said that it was not recognizing the number/name of the device, and he entered a part of the computer and changed the name of the device so that it would recognize my device again. I don't remember where to go or what to do.

  There, no one knows how to do this, or someone has advice on how I can connect several of the same item and have always them each individually recognized by the computer. I am running XP with service pack 3 installed. Hope that I have listed this investigation under the correct headings

  Thank you

  Aussiegirl1961

  Ask your friend... rename the USB key must not be done often. Check with the manufacturer of the program.

• I have a Robin Didital DPF - 710 photo frame, but there was not a usb port, how can I transfer photos from comp to a memory card

  I HAVE A DIGITAL ROBIN PHOTO FRAME DPF-710 FOR WHICH THE CARD MEMORY IS 1.0 GB, THE PROBLEM IS I WOULD ADD MORE PHOTOS ON THE CARD BUT DO NOT KNOW HOW TO IT AS THE IMAGE HAS NO USB PORT AND I WOULD LIKE TO TAKE PICTURES ON MY COMPUTER TO THE MEMORY CARD, COULD YOU PLEASE ME TELL HOW.

  I guess just that your computer has a media player?

  (If no drive media... Connect the device to your PC
  via USB cable and turn on... Reach... Start / computer...
  your camera must be listed with a drive letter.)

  If you go to... Start / computer... media player should
  be recognized as one or more removable disks... it can
  have several drive letters.

  Removable disk (e :))
  Removable drive (g)
  Removable disk (h :))

  Left click the drive letters... When you identify the drive
  Letter for the media player... (it will be the one making
  does not launch a dialog box that says: "Please insert a disk".
  in the drive? ») ...

  Follow these steps...

  Navigate to the folder in which the photos are... Open it and
  Reach... Edition/select all... right click the selected (highlighted)
  Group and from the menu choose... Send to / removable
  Disk?... Or... left, click on a folder and do the same thing.

  Only a limited number of files can be copied to the root
  Directory of the card... if you transfer lots of photos...
  they must be in one or more folders. If you receive one
  error that says: "cannot copy xxxx (xxxx): the directory '.
  the file cannot be created. » .. There's too many files in
  the root directory of the memory card.

  FWIW... the camera may not recognize the photos if they
  have been published in some way, but they will always be on the
  memory card for use by other means.

• How to change the import settings when importing photos

  Changing the settings to import photo with Windows 7

  I want to change the import for my Canon camera settings when you import pictures using Windows 7.  I had already managed to do it once but to adjust settings again.  However, when I connect my camera to my PC, it starts automatically import photos based on the current settings with no option to change.  Please help - its driving me crazy!

  Microsoft seems to be lame on answering machine bugs here and just standard information messages, which of course do not work.

  A solution has been validated, in part, to david.gardiner.net.au/2010/02/changing-location-of-pictures-and.html. Maybe there is an easier way.

  In the Windows registry under HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Photo Acquisition

  There are a number of subkeys. For example, there is a subkey "Camera and Portable device."

  Return the next value of AcquisitionFlags to 0 x 82 in the registry key seems to restore the Import Wizard asking you to specify an optional tag and you click again on the link "Import settings":

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Photo Acquisition\Camera and Portable device

  To make this change yourself, follow these steps (with the standard warning that change the incorrect Windows registry can completely ruin everything!):

  1. run regedit.exe
  2 navigate in the tree of the registry to find the following subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Photo Acquisition\Camera and Portable device

  3. double-click on the value "AcquisitionFlags".
  4. Type "82".
  5. click "OK" and close the registry editor

  I had to scan it for my Scanner in the category.

• Help blackBerry 10 Hub settings display and Actions

  I'm relatively new to Blackberry and try to understand all the features. On my classic if I go into the hub > settings > display and Actions there is a parameter called "Audio", which has 3 options: handset, speaker, or command prompt.

  Can someone inlighten me as to what this setting is? I can't find any documentation about this setting.

  I use the Blackberry screen reader and nothing to do with audio and who can help me by using my Classic is of interest.

  For audio attachments. Handset is the speaker phone. Speaker is the speaker/speaker phone.

• How can I reduce photos strained on digital photo frame

  some of my images are fine and normal, others are distorted by the stretching of how I overcame stretching

  See the manual for the photo frame to the size of the supported.

  You will then use a photo editor to resize some of your photos.

• How to view windows live movie on my HP df820b4 digital photo frame

  I have created a slideshow movie about 1.4 GB using Windows Live Movie Maker.  Save the movie, I even copied on a 4 GB SD card and inserted into the slot on the photo frame.  He said there's nothing on the disc, however, my computer says otherwise.  I then ran the slide show through my software "Digital Media Converter more" as an mpeg4 file.   This was not recognized by the framework.  I'd be happy if someone can provide the necessary appropriate file extension or, if not the problem, what should I do to allow the slide show (film) to appear on the frame.

  Thanks for your help.  It seems now that it is HP support to address the problem...

• How can I resize the photo frames to adjust photos cropped to Blurb photo book?

  I want to put the pictures as a photo using Lightroom book and the Blurb photo book module. Question: I do not see how to drag the sides of the photo frame individually to fit my photos, which are often cropped produced long skinny shots or those wider than the usual 4:3 format (not to make the frame of the photo, but to make the image go up the photo. I can easily do in Apple Aperture, but cannot see how to do in Lightroom in the Blurb module. I contacted directly the text of presentation that told me to contact Adobe - and this seems to be the only way to communicate with them. Help, please!

  Hello

  It's actually pretty simple, so, of course, I understood your request with precision.

  It is possible for the two control the zoom and the frame of the size on a page.

  Let's say you want the entire image on the page to a size different from the default.

  All that is necessary is to select a particular page by clicking on it.

  You know that he was selected by the yellow outline around the page.

  Then, hover on the edge of the image as it exists on the page.

  Try both horizontal and vertical edges as needed until you get a change in the cursor of the mouse that looks like a cross with arrow heads.

  L click and drag the image around until it is the size you want on the page.

  The image remains centered on the page.

  The proportions of the image is not altered.

  If you choose, there is an additional control to zoom the image, and then move the image around, in part, to get the framing you want.

  See how you go.

  Thank you

• I don't see "Photo frame" as a fill layer. Help!

  Well, I'm doing a box around one of my photos in Photoshop CC, and everything I've read shows that I should be able to make a new layer, then SHIFT + F5 to bring up the fill layer, click pattern, click the Script box, and the dialog box should have an option for photo frame. This isn't. This option disappeared? Move to another area of Photoshop?

  Moved to Filters > make > Photo celebrity