Several click event

Similar Questions

• I write a test using a sequencer to test several click of a button

  I use flex sdk 4.1 and have a situation where a button click is sometimes called twice. I am writing a test for this by using only a sequencer and it will run at least a click, I'm not sure is how to test several click events (which shouldn't happen, but occurs randomly in my project)

  package tests.view
  {
  import flash.events.MouseEvent;
  
  Import flexunit.framework.Assert;
  
  Import mx.events.FlexEvent;
  
  Import org.flexunit.async.Async;
  Import org.fluint.sequence.SequenceEventDispatcher;
  Import org.fluint.sequence.SequenceRunner;
  Import org.fluint.sequence.SequenceWaiter;
  Import org.fluint.uiImpersonation.UIImpersonator;
  
  view of the import. AddComments;
  
  public class TestAddComments
  {
  
  private var view: AddComments;
  
  [Before (async, ui)]
  public void setUp(): void
  {
  view = new AddComments;
  Async.proceedOnEvent (this, opinion, FlexEvent.CREATION_COMPLETE, 600);
  UIImpersonator.addChild (view);
  }
  
  [Test]
  public function testButtonClick (): void
  {
  view.addCommentBtn
  var sequence: SequenceRunner = new SequenceRunner (this);
  
  sequence.addStep (new SequenceEventDispatcher (view.addCommentBtn, new MouseEvent ('click', true, false)));
  sequence.addStep (new SequenceWaiter (MouseEvent.CLICK, view.addCommentBtn, 100));
  Sequence.Run ();
  }
  }
  }

  The only way you could test for this type of circumstance... where something can happen... one is to do with a time-out. In other words, you can't pass the test simply because the first event has occurred.

  Two ways to handle this... with sequences:

  Instead, you write a test that awaits 2 clicks. In the Manager of the assertion (which would only be achieved if the two clicks occur) you would fail the test:

  failure ("I shouldn't be here");

  In the server for the 2nd click, you can specify a timeout handler. This timeout handler is called in the 2nd click does not occur for the specified time. (find that time is the hardest part). Default timeout Manager fails the test, however, in your case, your manager timeout would just fortunately make necessary assertions and move. A time-out is not necessarily failure... in your case, it's OK

  Second choice:

  You could create a timer. Create an event handler for the click on a button that increments a counter. Start the timer, do your test. However, having your test until the end of the timer, rather than something like the click... In this case, you would then be able to simply check the count:

  private var clickCount:int = 0;

  [Test]

  public function testButtonClick (): void {}

  var: timer = new Timer (100, 1);

  Async.handleEvent (this, timer, TimerEvent.COMPLETE, checkClickCount);

  view.addCommentBtn.addEventListener ("click", function (e: Event): void {clickCount ++});

  view.addCommentBtn.dispatchEvent (new MouseEvent (' click; true, false));

  }

  private void checkClickCount (e: Event): void {}

  assertEquals (1, clickCount);

  }

  However, I can't imagine how the test you describe could give never more than a click event... I guess the problem is elsewhere, but it will help you check

  Mike

• Insertion of several subforms instances with app.response on the click event.

  I could use help untangle this click event. I can't make it work the way I need too. I tried a few different variations without success. The part I have a problem with is in the loop and inserting multiple copies based on the user input to the app.response event. I have a script version that works with no loop, but who will not allow the insertion of multiple instances of the subform feature. Would appreciate any help on how I can do this.

  var cChoice = app.popUpMenu ("Add a blank section", "Copy this section", "-", "Delete this section");

  If (cChoice == 'Add a blank section') {}

  ACT.instanceManager.addInstance (1)

  } Else if (cChoice == "Delete this section") {}

  ACT.instanceManager.removeInstance (this.parent.instanceIndex)

  } Else if (cChoice == "Copy this section") {}

  var cResponse = app.response ("the number of instances of the section you want to insert?", ["copy current section"])

  }

  If (cResponse is nothing)

  {

  App.Alert ("no copy of this section was inserted because of a response zero.");

  }

  on the other

  {

  var i = ACT.instanceIndex

  var j = 0

  while(j<cResponse) do

  {

  _ACT.addInstance (1)

  xfa.resolveNode ("form1. Subform1.Act ["+ (i + 1) +"]. . RawValue row1. TextField") = xfa.resolveNode (" form1.. ") RawValue Subform1.Act.row1.TextField")

  Hello

  You code got a little truncated, but maybe something like;

  var cChoice = app.popUpMenu ("Add a blank section", "Copy this section", "-", "Delete this section");

  If (cChoice is "Add a blank section")

  {

  ACT.instanceManager.addInstance (1)

  }

  on the other

  If (cChoice is "Delete this section")

  {

  ACT.instanceManager.removeInstance (this.parent.instanceIndex)

  }

  Else if (cChoice == "Copy this section")

  {

  var cResponse = app.response ("the number of instances of the section you want to insert?", ["copy current section"])

  If (cResponse is nothing)

  {

  App.Alert ("no copy of this section was inserted because of a response zero.");

  }

  on the other

  {

  var i = ACT.instanceIndex

  var j = 0

  While (j<>

  {

  Var _ACT.addInstance = Act (1)

  Act. Row1.TextField.RawValue = xfa.resolveNode ("form1..") RawValue Subform1.Act.row1.TextField")

  j ++ ;

  }

  }

  }

• Add dynamically with the click event.

  I introduce several add button programmatically. I have sucessfully Add button but I can't able to get the button click event everything. I always click the last button added.

  Event for all I want to separately, click the button.

  I use this code for the Add button.

  ComponentDefinition {
              id: mComponentDefinitionSubmitButton
              Button {
                  id: mButtonID
                  horizontalAlignment: HorizontalAlignment.Center
                  onClicked: {
                      //My Click code. Always detect last button.
                  }
              }
          },
  

  var mButton = mComponentDefinitionSubmitButton.createObject();
  mButton.text = qsTr(title)
  mContainerButton.add(mButton)
  

  I did with signal...

  function checkClick(button)
      {
          console.debug("click..."+ button);
      }
      attachedObjects: [
          ComponentDefinition {
              id: mComponentDefinitionSubmitButton
  
              Button {
                  id: mButtonID
                  signal click(variant text);
                  horizontalAlignment: HorizontalAlignment.Center
                  onClicked: {
                      click(mButtonID.text);
                  }
              }
          }
      ]
  
  ----------------------------------------------------------------
  var mButton = mComponentDefinitionSubmitButton.createObject();
  mButton.text = qsTr("Button");
  mButton.click.connect(checkClick);
  btnContainer.add(mButton);
  

• Custom cursor - button click event does not

  Hello

  I'm looking to use cursors with AS3.  I created a movie object I position using:

  function mouseMoved(event:MouseEvent) {}

  mousePointer.x = this.mouseX;

  mousePointer.y = this.mouseY;

  }

  and by calling the Mouse.hide)

  It works very well on what the custom cursor follows the mouse, but I'm having some trouble using the events with the cursor.  I have several events click on the several buttons.  Events do not trigger when you use the custom cursor.  In my ignorance, I guess the problem is that the custom cursor movieclip is on the top of the key, and then click events are generated only for her and not the button.

  Is there a way to get around this?  And is it usually possible to ignore the events of a clip for a clip that is below?

  Kind regards

  Robbie your

  Try:

  mousePoiner.mouseEnabled = mousePointer.mouseChildren = false;

• The Click event component button

  Hello

  I have a custom component which is a login form. This form of connection will be muilitple useful so I don't want to set the event click on the login button in the custom component, but I want to set the click event of the button in the component of the parent of the < application > for example I want to do in MXML that I don't want to not like in the default file < application >

  Here is my custom component code is < ns1:LoginPanel id = "loginpanel1" / > at the bottom of the code below

  Default Application file
  
  
  <?xml version="1.0" encoding="utf-8"?>
  <mx:Application  xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:ns1="*" borderStyle="inset" borderColor="#B7BABC" cornerRadius="15" horizontalAlign="center" verticalAlign="top" xmlns:grc="grc.*" xmlns:events="flash.events.*">
   <mx:states>
    <mx:State name="MainApp">
     <mx:RemoveChild target="{loginpanel1}"/>
     <mx:AddChild position="lastChild">
      <mx:Label text="User Has Now Logged Inn" fontSize="30"/>
     </mx:AddChild>
     <mx:AddChild position="lastChild">
      <mx:Label id="username"/>
     </mx:AddChild>
     <mx:AddChild position="lastChild">
      <mx:Button label="Button" />
     </mx:AddChild>
     <mx:RemoveChild target="{image1}"/>
    </mx:State>
   </mx:states>
   <mx:Style source="yflexskin.css" />
   <mx:Image source="@Embed('images/engage_logo.png')" id="image1"/>
   <grc:Initialize id="remoteService"/>
   <ns1:LoginPanel id="loginpanel1" />  <<-- Here is the Custom Component I have a button called "loginButton" in the component how do I set the click event for the button from here using MXML
  </mx:Application>
  

  Thanks in advance for any help, it drives me crazy as a new to Flex, but come from a PHP back gorund. I must say I am very impressed with flex for RIA

  Concerning

  Chris

  Hello

  Manage your click event in the custom but component only to send an event to display the button click on it.

  
  http://www.Adobe.com/2006/mxml"width ="400"height ="300">
     
          private function clickHandler (): void {}
  dispatchEvent (new Event ('myClickEvent')):
  }
  ]]>
     
     
     
  [Event (name = "myClickEvent" type = "flash.events.Event")]
     
     
     
     
  

  Using the tag, you expose your custom event in mxml when you use your tag customComp in your main application.  So in your main application you can manage here

  
  "http://www.adobe.com/2006/MXML" layout = "absolute" xmlns:ns1 ="*" >
      myClickEvent = "myClickHandler ()"> ""
     
  

  In this way, you can write several event handlers for the different ways you want to when you instansiate your custom model.

  Hope that helps

  Andrew

• Click event incorrectly attached after DOM manipulation

  I have a page with elements of entry and a span element style as a button. Register event handlers changes on input elements, to make the validation when the input values are changed. If the entries are not valid, I add the content of a div on the page to indicate the problem. I also save a click event handler on the span of style as a button.

  When I change an entry and then immediately click the duration (i.e. without leaving the input element before clicking on the duration of the update), I see:

  (1) mousedown on the duration
  2) switch to entry
  (3) mouseup on the entry

  This happens only when I change the DOM in the event handler changes on the entry. If I do not change the DOM then I see:

  (1) mousedown on the duration
  2) switch to entry
  (3) mouseup on the duration
  4) click on the duration

  In the first case, I see the mouseup attached to the input rather than the span element element, even if it has the same coordinates as the mousedown attached to the span element. Given the coordinates are within the span element and outside limits of the input element, I don't understand why mouseup is associated with the element of entry rather than the span element.

  There is an example of this at http://jsfiddle.net/4zx8rm7c/.

  I see this behavior in Chrome and Firefox 34.0.5 39.0.2171.95 m.

  If the association of the mouseup event with the input element, despite the apparently independent of the mouse event, behavior plan, coordinates I need to understand why that is. I looked at characteristics of COM event level-2 (briefly) and I don't see an obvious explanation.

  This forum is intended for the user support, not for issues related to web development.
  Try announcement Web development / standards evangelism MozillaZine forum. The contributors there are better informed on the problems of development of web page with Firefox.
  http://forums.mozillazine.org/viewforum.php?f=25
  You will need to register and log in to post in this forum.

• Errors in 'Speed' while accessing the mouse click events?

  Hello

  I built a software where it has a CVI callback function registered on the Panel. The function tests whether two cases, the first EVENT_LEFT_CLICK and then EVENT_LEFT_CLICK_UP. The user is supposed to keep the click button for some time (~ 1 second), and there is no problem. However, I have found that if by mistake (that users commit often) multiple rapid clicks are made, sometimes the click down the piece of event (EVENT_LEFT_CLICK) of the code is not read. I reduced the likelihood of this problem of the speed setting of double click (on Windows) to the maximum.

  I think that if I could eliminate the double click event, this problem would be resolved almost completely and only limited by the speed at which the processor can update mouse events.

  Hope you understand my problem.

  Thank you!!

  AUTOSOLVED.

  Thanks to a guy who posted his own solution on a Windows forum, to 'disable' the double click. Just change the HKEY_CURRENT registry value > ControlPanel > mouse > DoubleClickSpeed to 1. What makes the double click speed so fast that you can access virtually every user actually simple clicks.

  After doing this, in order to apply the registry editing, I ended explorer.exe running and he raised through windows task screen. However, change, this applies to what I opened the mouse Panel (without change or apply anything from there).

• By the way a multicolumn Listbox double-click event line in a secondary

  What I have is a shell at a higher level with the configuration of equipment of high level, as well as common application functions as save the test report and exit/close.

  In this first level is a listbox multicolumn "Test selection".

  When a device is selected in the configuration, one of the many sub-panels charge based on the selected device.  When the secondary is loaded, the table of test selection on the front of the top is filled with items via a reference.  The listbox items differ according to high school who is responsible.

  Normally what we do is use a structure of the event with the event double-click to change States in the program.  Given that States I want to change are in the secondary, and the list box lies in the toplevel, I can't use the event structure to integrate this double click on the secondary line.

  What I want to do currently a property to read to the 'value' of this list box in the secondary in both cases the timeout of a structure of the event or within a parallel loop, then to the decision of the State based on the changing value of the indicator.  However, by doing this I lose the effect "queues" in the table of test selection (can double-click some line items and the structure of the event will be queued double click events).

  Is there a more elegant way to spend this line double-clicked in the secondary?

  It seems that you already pass a reference to the Listbox MC control to the Subvi.  You can use it to record dynamically for the double click event inside the Subvi.

  

• Double-click event

  Hello

  How to get the double click event. (ex if I click table colume double time as only triger event.)

  Hello

  pls refer this link...

  http://digital.NI.com/public.nsf/allkb/391D522B0FDD4B3F862571E300739F44

• Contact information for return pixel Imaq image with the mouse click event

  Hello

  I'm trying to get the coordinates in pixels of an image Imaq based on a mouse click event, similar to this post and this post. The problem is that with the first post, I get the coordinates in the image control and hesitate to trust them, they seem to have the Center origin, may return negative coordinates and do not represent the actual size of the detector that I use (512 x 512). It also returns the coordinates outside the actual data when it is clicked on the image control framework. The second method returns simply null coordinates. What I want are the coordinates of the pixel displayed when hovering the mouse imaq image control framework.

  What baffles me, is that I tried the second method with a png stock file and it works fine, it is only when I create an image from the data of my camera than the coordinates are returned null. Note data views of camera under control of image very well.

  Any ideas would be useful. Enclosed is a picture of the offending code and the Panel before displaying the camera data is coming (I know it needs some cleaning).

  Thank you

  Tyler

  for help, please send your vi

  but I think that this example vi is your solution

  check this vi

• How to create the scroll to the menu icon click event bar

  How to create the scroll to the menu icon click event bar

  (as the "field of scrolling image")

  In my opinion, it is better for you to try something to help implementation of your solution to ask for the code.

  For example, create a few BitmapFields with icons that act as buttons.  There is source for this sort of thing on the forum if you look at, I think, looking FRO Image button, icon or Bitmap button.

  Once you have these buttons work, add these in a HorizontalFieldManager.

  Good luck.

• Add images to the listfield on the click event

  Hello

  I'm trying to reproduce the "tableview with UITableViewCellAccessoryCheckmark" iPhone, IE, whenevever, I click on a line in the listfield, I want to display a check mark in the same row.

  In the click event, I am not able to get the graphics of the listfield object draw the check mark. Is there another way to do this?

  Any response is appreciated.

  Thank you

  http://www.BlackBerry.com/developers/docs/6.0.0api/NET/rim/device/API/UI/component/ListField.html#GE...

  (using the index you can retrieve the item from the underlying collection)

• Capture the click event of the button 'back' on DateTimePicker

  How to capture the click event of the button "return" on the DateTimePicker control.

  Show us in the form DateTimePicker.doModal)

  I know that this response is late, but if someone else is asking about this.

  doModal() returns a Boolean value and returns false if the user clicks Cancel.

  I hope this helps.

• not pulling - click event button position: fixed - 2.0 Playbook

  I have a fixed position "back" button in my application that triggers not when scrolling to the bottom of the screen.

  Here is the code for the button:

  Back
  
  

  When I scroll the screen to the top, the button triggers without problem. However, if the screen scrolls down at all, the button's click event will not occur.

  I've traced the events Web Inspector and a click event fires when I click the button. However, it does not actually draw the method that I've linked to the click event of the button. Once again, if I scroll the screen to the top, the button click fires very well.

  I must emphasize that the button is displayed correctly at all times. He remains in a fixed position of 5px to the right side of the screen, even when scrolling of the window down. If the button is visible at any time. It's just that when I scroll nothing happens if I click on the button.

  Looks like a bug with WebWorks. If anyone can confirm?

  Thank you

  Thanks for the suggestion ignites.

  I found that this was due to my own bug. It was a problem with z-index. I increased the z-index of the button, and it solved the problem. The button must have been in conflict with lowest elements of the page, but it was very well at the top of the page.

  Thank you