SG300-10 - static DHCP IS * NOT * work - assignment using MAC
Hello experts,
I'm not an expert on Cisco switches, so I use the web gui to configure my switch.
I created a range of IP addresses for my network and also set a different default VLAN - as I understand it it's "best practices".
my default VLAN:
199
I deleted all other VLANS until I figured out how to set these static IP addresses.
and all ports are assigned with the VLAN above *only*.
If the IP range is defined as:
192.168.11.0/24
This is the info as it appears on the web-gui:
vlan_199_ipServer |
255.255.255.0 |
192.168.11.1 |
192.168.11.254 |
0d 0 h 1 m |
I put the renewal interval to 1 minute for debugging purposes. and I will he change once I have it working properly.
This switch works as DHCP in the network server - but no static address don't seem to work.
Instead, dynamic IP addresses are used by the clients/PC in this network.
Among customers, there is Windows 8, Windows Vista, Ubuntu 12.04, Ubuntu 13.10 raspberry-pi raspebian...
but there is no way that I can put then in a static IP address.
I already entered the details, and there is a static IP list with the following information:
INTELLECTUAL PROPERTY
host name
network mask
MAC address
and it's posting on the web-gui as:
IP Address | Host Name | Network mask | Identifier type | MAC customer/address identifier | Client Name | ||||
---|---|---|---|---|---|---|---|---|---|
192.168.11.40 | rpiDesk01 | 255.255.255.255 | MAC address | B8:27:EB:D8:82:B6 |
I am not sure if I have provided information suffient - please let me know if you need more clarification.
My problem - how my static IP address to use instead of the dynamics?
with respect,
With these cisco switches stupid, that you must first allow clients to recievs its IP via dhcp and then watch the table liaison to see how he requested from the server, did she use a client or mac id. Then create that he used a static entry using the same. Remove the entry bind and arp entry and then connect the client again.
I have this to complain over a year without doubt to nothing done. The switch must be intelligent enough to understand one another, simple analysis and rectification of the lead byte if a customer id is provided by the customer.
Tags: Cisco Support
Similar Questions
-
pictures 1.0.1 does not work in my mac
pictures 1.0.1 does not work in my mac when I open it I see the welcome message and the Tower, but when I click start it just stays for a long time as if it was loading, but nothing happens. Even I can't close it unless I go in mac preferences, and then click Exit forze then it closes.
It worked before?
You is a photo for Mac forum
This is the Office Mac Pro forum. I asked that your post moved to the forum of Photos for Mac or another appropriate forum.
-
The link to the minimum configuration for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I guess that the requirements for the beta are different, that I can't seem to install the beta on my Mac. Where can I find the beta version of system requirements?
Firefox 4 will not work on the Mac PPC, for Mac it needs the Intel processor. There is an accumulation of third parties based on Firefox 4 beta, which should work on Mac PPC, for details, see http://www.floodgap.com/software/tenfourfox/
-
my printer does not work with my Mac, but because our hp computer
We will restore the print system:
-Sys Prefs, Print & Fax
-Right (control) click inside the box that lists your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks. -
How to import the mp4 files, it does not work on my mac
How to import the mp4 files, it does not work on my mac
If you try to import a video to use as a guide in your timeline, the video must be H.264 with AAC audio. You cannot use the other MP4 videos with other codecs (such as the MPEG-4 video codec).
-
Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?
Hi connally25,
Here is a link to a video tutorial on how to add a Facebook button, please check if you have followed the same steps to add the video.
http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/adding-a-Facebook-like-button/
If you followed the steps correctly and the button still does not; Here is a link to a forum thread which may help to solve the problem:
Facebook follow Widget does not
Concerning
Sonam
-
Cisco WLC 2504 internal DHCP does not work properly
Hi all
I m trials with a Cisco WLC 2504 and some APs of 1832. I set up a DHCP scope on the interface of the controller with 2
a large number of different configurations, but the DHCP protocol does not work and Don t Access Point to obtain an IP address. My first question: is it possible to do DHCP for Access Points or only for wireless clients?
These are my interfaces:
Interface of the PA-Manager:
My DHCP scope:
Advanced DHCP:
I forgot something? Is there anyone using DHCP for its access points?
Thank you!
Hello
On Cisco WLC internal DHCP, you can add the option 43 to say where APs must register. In this case, they will try to resolve the DNS CISCO-CAPWAP-CONTROLLER or CISCO-LWAPP entry.
Let me explain briefly how AP-Manager works on WLC:
- Boots of Access Point and sends a discovery request to the management interface of the controller using the intellectual property you configured as DHCP Option 43 (as described above, it can be resolved by the DNS entry)
- Controller, sends it a response discovered that contains the name of the system, addresses AP-Manager, the number of access points already connected to each interface AP-Manager and the overall capacity of the controller.
- Joints access point controller using the less loaded interface AP Manager.
With this, every AP Manager must have a good configured interface and be connected to a different port, no LAG.
I drop a post here sometimes there is which might help:
https://supportforums.Cisco.com/document/118311/configuring-multiple-AP-...
Thank you
PS: Please do not forget to rate and score as correct answer if this answered your question
-
iCloud/continuity does not work with my Mac or iPhone now
I was really holding this problem for a very long time now because it's really a "first world problem", but in the past year continuity and iCloud were either non-existent or not working properly on my iPhone 5 s (32 GB) and mid-2014 13 "(2,6 GHz/8 Go/128 SSD) retina MacBook Pro (and now it just feels like I use old devices when I'm not."
They work on the latest versions of iOS and Mac OS El Capitan, are on the same WiFi network at home or at school, have all two Bluetooth-enabled, and are both signed in my Apple ID iCloud
Last year when I had the time, I reset the settings, wiped and restored the iPhone, etc, to try to get continuity works again. Nothing seems to work, and so that the whole process has been somewhat of a breeze on the release of these two operating systems, for some reason any he didn't work on my devices. I'm really ideas at this stage on how I can get the work continuity (the alternative at this moment is iCloud tabs in Safari).
With iCloud, the issues are not as complex, but the photo stream is not working properly. If I take pictures on my iPhone that do they not appear in a few hours on my Mac, and if I add a bunch of pictures in pictures on the Mac, appear at all on the iPhone. I have all iCloud settings enabled for Photos and it's still buggy.
I use Apple products since kindergarten and I consider myself to be a loyal customer. It would be a shame if I can't find a way to solve what should be a simple problem.
Thank you for your help in advance.
I guess you have tried to sign your iCloud (on all devices) account, signing in? If you tried and it did not work, and this problem is ongoing for you for a year, my next suggestion would be to call Apple Support (link at the bottom of the page) or make an appointment with an employee at the Genius Bar in an Apple store.
-
trackpad is not working I use an external mouse
trackpad is not working I have to use an external mouse.
Hey there, here are some tips that might solve your problem.
1 - Make sure you are on the last update. To see if updates are available for your trackpad, open the App Store and click the updates at the top of the window.
2-
Check your settings
Assuming that there were no updates available (or they do not solve your problem), the first port of call should always be your trackpad settings. Many complaints can be resolved simply tweaking a few options
-
my work computer has an old OS and does not support the new version of Firefox. Unaware of this trying ti install the latest version to see, it did not work and I lost the use of firefox.
I'd like a link to the version 3.6.24
3.6.24 is supported
http://www.Mozilla.org/en-us/Firefox/all-older.html
Thank you
Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.
-
Satellite A660 - Webcam does not work when using Skype
I recently bought a Satellite A660-15J. I am running Windows 7 64 bit.
I have the latest version of Skype (5.3.0.111).
The integrated Webcam does not work when you run Skype. If I run the Toshiba Web Camera Application the webcam works fine. However, when I test it in Skype, I get a message saying "cannot start video. Try quitting other programs that use the webcam '.
However, as far as I can tell there no other programs available. I have tried Skype with the Web Camera Application clised & open. I also confirmed that I do run the latest version of the program.
One of the main reasons we have this laptop is to use Skype video... Help, please.
Disable webcam application start-up and exit this application before you start Skype.
I used Skype many different models of laptops, including friends A660 and it worked correctly.
When you open Skype video settings is listed as default camera USB webcam?
-
X 230 bluetooth does not work - cannot use the cell phone as personal hotspot
I try to use the bluetooth in my X 230 to connect my laptop with my cell phone. I want to be able to use my cell phone as a personal hotspot, where I am in an area where no WiFi secure. I would have thought that it would be a standard feature in a laptop that is presented as a business device, but apparently this is not the case.
I installed the bluetooth driver and the updated system, as suggested by joelle...
http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&docid=HT073834
and
http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS012808
... but it's still not working for me. I am now able to connect my mobile phone to my X 230, but instead of allowing me to access the internet via bluetooth, a dialog box appears that allowed me to play songs that are on my cell phone using the laptop speakers.
I am disappointed that bluetooth driver has not come pre-installed on the 230 x, and I'm disappointed that I'm not able to use my cell phone as a personal hotspot for my x 230.
I solved the problem myself by following the instructions on this page.
http://www.kevintaber.com/2012/05/25/iPhone-personal-hotspot-via-Bluetooth-tethering-to-Windows-7/
In Windows 7, go to the control panel > hardware and sound > devices and printers
Then right-click on the bluetooth device (in this case, an iPhone) and choose Properties
Deselect all EXCEPT Personal Area Network Access Point -
I installed Revel app on my Mac, iPad, and iPod Touch. All devices are to date. Works on iPad and iPod. Revel does not work on Mac. Loads, but does not display the photo and does not respond to something.
What should I do now?
Hello Lippoe
The Revel app on your mac has ever worked before? Given that the app is being inadmissible, I would say to uninstall and reinstall the application.
Here is the instrucations to achieve this.
-Uninstall the app
-Click on the Finder menu go > go to folder > and enter: ~/Library/Containers
-Delete this folder and its contents: ~/Library/Containers/com.adobe.Carousel.mac
-Re-install goto Adoberevel.com app to install.
-Connect again
Let me know if it works for you
Thank you
Scott
-
I just installed the new Flash Player 9 on my Mac. All of a sudden all my calls Flash actionscript to Javascript in the browser has stopped working. It is a call that uses getURL ("javascript: funcName();"); go to Actionscript. It runs on a PC and works on a Mac with any version of the player before 9.
Someone at - it to another experianced?
Well, this seems to be my bad. It turns out that the bug I reported only appears on an older version of Safari (1.0.3) as well as the latest version of Flash Player (9). A new version of Safari doesn't have the problem and Funnily enough the old version of Safari mentioned above with the old version of Flash Player (8 or earlier) is not the problem either.
Anyway, because the version of Safari that I was testing is really old, I am convinced that this problem will not affect my users.
Thanks a bunch to look into it and put me on the right track.
-
6700 scanner does not work with my mac 10.9.2
I bought the HP 6700, I tried to scan for the last 2 days! It works very well with my husband's computer (a PC), but it won't work with my MAC 10.9.2! When I try to activate the scanning to computer it just says "communication error".
I tried:
1 restart the printer, computer and router
2 re-install the drivers (3 times).
3. repair disk permissions
any other ideas?
Try scanning from your Mac. Use Image Capture app in your Applications folder.
Click once on the scanner on the left side, and then click Show details on the background. Along the right side you will see MANY options for scanning and recording.
Maybe you are looking for
-
Crashes and return 20.0.1 to 20.0 for no reason
I had a lot of problems with Firefox crashing. Can I get a dialog box that appears and says that windows must be restarted to complete a previous installation or something like that. She also continues to go back to 20.0 after I installed 20.0.1 5 ti
-
Update failed. The update could not be installed (patch applies failed). He seems to want to upgrade 7.0.1 to 8. But when I click on the link, it does not offer updates, just all a band/reinstall! Where is the page of updates? Help?
-
List a subvi, called by a vi
Hello I would like to know how to generate the list of VI in a VI "main"? I need to have a complete list of the sources of my software. Thank you
-
I followed the steps for E-learning but did not have an access code
I have signed up for the microsoft free e-learning, created windows live mail, but did not get the access code I need. How to do it?
-
I have just re-installed windows xp and now I am unable to run automatic updates to message 0x8024400A. Whenever I try to view the answers on the forum they were all empty. I am at a loss total here someone can help.