SG300-28 vs SG500x series Layer 3 for beginner

Similar Questions

• DVD writer dual layer internal for Tecra M1

  Hello
  Does anyone know of a DVD burner double internal layer suitable for the Tecra M1?

  Thank you
  Colin

  Hi Colin

  Unfortunately there is no precise information on this subject. I'm not sure that you will find one that will work correctly with your Tecra. Try to contact the Service partner. Maybe they have an idea about it.

  Good bye

• I bought the first elements 13 and 13 Photoshop elements according to a trail. I received 1 set of serial numbers to activate Photoshop and 2 sets for first. However, after you type in the first series of numbers for the first, there was no place to type

  I bought the first elements 13 and 13 Photoshop elements according to a trail. I received 1 set of serial numbers to activate Photoshop and 2 sets for first. However, after you type in the first series of numbers for the first, there is no place to type in the second set. How can I check if the first has been correctly activated?

  You get usually just a serial number by program... a list of 24 numbers, 6 sets of 4.

  Click the icon of the program and see if it boots without asking for a serial number.

  If it is not running now, please contact support:

  To contact support, please click the link below, click on the still need help? option in the blue box below, then choose the cat. Make sure you are signed in with your Adobe ID, have cookies enabled and have deleted your cookie cache.  If you have any questions, try another browser.

  Serial number and activation support

  Guinot

• Where to find the best AE tutorials for beginner?

  Where to find the best AE tutorials for beginner?

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

• Satellite 1110 series only works for 12 seconds and then powers down

  We have several series of 1110 (Z14 and Z20) laptops and one of them fails to start correctly. Everything works perfectly for 12 seconds, and then it turns off. Each time at exactly 12 seconds.

  Does anyone have any suggestions where I should start looking?

  I've already replaced everything stands (up to the CPU), but without result. There seems to be something inside the motherboard BTK20.

  Thank you

  > There seems to be something inside the motherboard BTK20.

  Seems so if you replaced the common areas like RAM, HARD drive and the processor then the last part would be the motherboard

  But what do you think an overheating problem?
  I mean that the laptop could close because of the higher temperature
  I recommend to check this maybe the thermal grease should be renewed, clean the fans and check again

• How to synchronize a DSA Board (4496) with several S-series (6143) tips for PXI?

  I need to set up a data system that will require the measure to phase for accelerometers-locking and dynamic deformation signals.  How to synchronize my PXI-4496 Council with my PXI - 6143 s?

  I forgot that some DSA properties does not directly on the devices of the series S I have been able to find an article in the knowledge base that has addressed your specific issue.

  Synchronization Dynamic Signal Acquisition (DSA) with NOR-DAQmx products, this includes an example program synchronization a DSA device and MIO device to sample at the same pace.

• Looking for printer driver for all-in-one series of inkjet1200 for 64 bit Windows 7, how to solve?

  Hello

  I have a printer inkjet 1200 series all-in-one. You will need to communicate with high tower window 7 64-bit. But the original CD is not compatible with 64 bit. I tried to use the window updated but still not able to find the driver on the web. Any good suggestions? The printer is still in good condition and don't want to buy a new one yet. Thanks guys...

  Hi Catsugar,

  Follow the steps outlined in the document below to install this printer in Windows 7

  The driver for your product is included in the Windows 7 operating system

• 3800, 1800 router series 2900 images for GNS3

  Hello

  I confirmed to GNS3 website that she would not support images related to above mentioned by name, series 3800, 1800, 2900 that I thought to install for CCIE Security lab.

  Looks like I'm stuck in the establishment of the laboratory in GNS3. Could someone let me know can I use the other images in GNS3 (or no workaround) to test all the features of the above mentioned series which is required for laboratory tests.

  Thanks in advance,

  SAI

  What features Miss do you?

  Have you considered using Cisco VIRL?

  http://Virl.Cisco.com/

• Series of upgrade for graphics card F

  I was looking in the upgrade of my laptop, but as you know, most laptops are not expandable so I looked in my Sony VAIO (VPCF23JFX) F series and I wonder if it's expandable, as seems to be less efficient because I ordered the bundle of battlefield 3 and it can barely run low graphics settings.

  Thanks for the reply, it's disappointing that the GPU is integrated, but I wonder, because I saw the forum posts on other sites that there may be large enough to hold a second (?) graphics card. I downloaded the recent update of the GPU, and I also 6 GB of memory so I will try to acquire more. Another thing that bothers me is that I can't access my BIOS my GPU control center as some of my video games to be used by the power output in the GPU. As my friend tells me that I don't know much about computers.

• To select a series of comments for deletion

  I can't select a series of comments (using Shift) that spans multiple pages. If I try, the first comment I click on is not when I click + shift on the end comment. I am trying to remove the comments on the 170 first of all pages of a 600 pages, PDF format. I am using Acrobat Reader DC. Any help appreciated.

  Hi Jordan,

  Please use "Ctrl + click" to select the comments for more than one page.

  If you still experience the problem, please share the version Acrobat Reader DC and OS dot on your system.

  Kind regards

  Meenakshi

• [R] INTEL SERIES 6 CPITSET FOR HP G5210UK

  Can I find out if my office above is affected by Intel [R] 6 SERIES CHIPSET ISSUE.

  OLAJIDE

  Hi fadlimen,

  Just to confirm, is this your PC: http://support.hp.com/us-en/document/c02582355

  If so, I don't think that your PC is affected by this issue. Looking at the specs for your PC, it seems to have an AMD processor, so you do not have Intel issues.

• License series Adobe Cloud for Windows can be used on MAC?

  
  We have a series of several Adobe Cloud Packer licenses in windows and work very well. We also have a Mac Machine and we did download for this typefaces, but when tryied to use the same serial number, do not accept.

  I would like to know if we can use the same serial Adobe windows/PC in Mac machines. Should be accept or will need to purchase additional different licenses?

  Thanks cordially

  Alex Correia

  End user: Telefónica Brasil SA

  Hi Alex,

  The Adobe CC license are platform independent.

  They can be used on Windows and Mac.

  Kind regards

  Sheena

• How can I make a top layer "transparent" for the end user?

  Hi guys,.

  You have a quick question.

  I am working on a custom map generator and I was wondering if there was any way I could keep a downloaded image editable to the end user. The end user will be able to choose which model they want to frame the picture with. The problem is, even with transparency that chose the framework acts as a layer, and once the uploaded image was placed on the area of transit, end-user lose the ability to change/scale/tilt this image. I want them to still be able to do this even with the model over their image.

  Can anyone think of a solution to this? All tips are greatly appreciated.

  You literally chop each image. To keep things reasonable update you can use Photoshop to slice the graphics, save to the external png to import into. If a picture has 4 edges, you cut out the 4 sides, import into Flash and put back together within a single Sprite or MovieClip. Any area within this sprite who does not object real is real transparency and won't call a click action.

  Don't forget, the hitboxes are rectangular. If you have an oval frame where the edges are asking you to create images with transparency on their edges, which will be clickable. If you don't immediately understand what I mean by this draw randomly just a circle in flash, convert to the clip. Now draw your cursor around what we consider the part 'top' of this frame and note how many inside you also complete capture at the same time. That will all be clickable. So that the user can 'see' their picture behind the frame, but when they click they accidentally get the framework in place.

  Picture is worth a thousand words (sharp image at random):

  

  If you cut the oval frame into 4 pieces (it's the top of course), the transparent area, you see in the picture will be part of the hitarea for the frame. This can be just as confusing to customers in this situation. If most of your managers have little or no transparency (very square upwards) so it will be not a problem. Just like the problem you are having now, no bitmap transparency will be clickable, even if you cut the sides to the top. The Center where there is no bitmap cannot be clicked through to mess with the photo behind the frame.

  So, this makes it a little more desirable transparency detection.

• Selection/layer for beginner question

  New tempting user select the image of a photo for the overlay to another.  Can select with tools without any problem but unable to understand how to use only the selected part of a photo to superimpose on the background layer.  Would appreciate help from experienced users.  Thank you

  1. Let's say you have A & B photos
  2. Open the two images.
  3. Make a selection with one of the tools on A. You should see "marching ants" around the selection
  4. Go to Edition > copy. This will put the selection to the Clipboard
  5. Open the photo B, go to Edition > paste. Now you should have the choice on its own layer on B
  6. The tool move the access, the position of the selection and you can resize it with the angle handles as well

• make a visible top layer invisible for buttons / controls on a layer below.

  THE PROJECT

  I have 3 layers in a CS3 project, in the following order:

  -top Layer (layer semi-transparent Vignet and some additional graphics, all of this is contained in a loaded dynamic mc)

  -Middle Layer (the content that contains the navigation and content. This charge dynamics)

  -Background (it contains a screenfilling background image, and a few graphic alements, all of this is contained in a loaded dynamic mc)

  THE PROBLEM

  The top layer off the dynamic content blocks because its more of it.

  SOLUTION

  Dynamic turn off the layer top, so doent flash use it anymore.

  I want to keep it visible, but not accessible for any mouse action.

  Must be kept below visible dynamic content for interaction.

  I hope I described it quite clear, if someone can give me the solution.

  I gues it is some attachment real simple code.

  Thank you.

  I did a quick exaample the demo with a layer of something on top of a layer of controls and disable it to interfere with the commands below.  For this example, the lean rectangular area is the layer of Vignet who stands on a button on a layer underneath - I threw it in a background layer too, just to cofuse eyeballs, I guess...  When you click the button, it allows the Vignet layer so that it blocks the button and clicking on it it turns off again... just a variety of liuttle of commands that may be useful to you at some point.

  If you can let me/us know whow you file is different, then perhaps it will be easier to identify a different solution if one is necessary.

  http://www.nedwebs.com/Flash/vignet.fla