Sharing of framework in the Beta3

Similar Questions

• A few questions on the framework of the actor

  Hi all

  I tried to get my head under the actor and begins to see the light at the end of this tunnel-no need of sunglasses right away, because I have a few questions remaining:

  1. data transfer :

  So far I've had a quick glance the evaporative cooler model and actor model, as well as worked through the LabVIEW actor Framework Basics by labvolution. These examples are pretty clear for me now. What I don't understand though, is how you are supposed to provide "real" data These examples use only references and then update using the "value" property This may not be very fast, but is probably still enough for user interface applications. But what happens if I have a player who generates data by reading example of a card and I have, let's say, want to detach this far from the data backup process in a file. How I would pass large amounts of data between stakeholders effectively.

  2. using the framework of the actor with RT:

  In presentations to the AF, I saw that they always mentioned that it was completely "capable RT. While this may well be true for the RT itself system, yet once I wonder how to transfer data from an actor of the RT of a player in Windows. Yet once again, suppose I want to generate data on a cRIO and save that data on the host PC. I will establish a channel of communication between the target myself by network flow or similar? It defies any sort of encapsulation of the AF in my opinion...

  3. set the actors:

  However, what worries me the most, is the definition of the actors. How can you know what is a player in your system? Each card set as an actor? Define you each device as an actor and consolidate all I/o to the breast? Is there an easy way to know how to set the actors?

  4. technical support:

  While working with the examples, I found that the debugging can be quite difficult. I had several cases of "Not executable Subvi" this point through several other live who finally call something dyynamically and from there, you discover that one of your screw is broken. Is there an easy to know what is the problem? I know there are modules for LabVIEW that are designed to turn on debugging part of the actor, but who would not be available in a review of the CLA, where you will have only a base installation of LabVIEW.

  5 root and nested actors:

  Finally, I wonder what root and nested average actor. So far my understanding is that the actor root is the parent actor you cast in the launch of VI and nested the actors are all children who serve the actor parent and are, most of the time, launched since the actor-actor of parent nucleus. Is this correct? Is there a better definition of it?

  Any help on this is greatly appreciated. I'm looking forward to the discussion and interested if you frequently use the framework of the actor or if you have abandoned it even once after using it.

  See you soon,.

  Pete

  A good place to ask the question in the framework of the actor is in the community:

  https://decibel.NI.com/content/groups/actor-framework-2011

  And Yes, I've used and uses the framework of the actor.

• framework of the actor

  Hello

  Where can I get the version of the Framework of actor that I have on my PC?

  Best regards, Bjarne

  Hi Bjarne.

  If you use LabVIEW2012, the framework of the actor is located at:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\vi.lib\ActorFramework

  For LabVIEW2011, you can find user.lib.

  If you open the lvlib and go to properties, you should be able to see the version:

  

  If you have installed the framework using VI Package Manager you can see as well the version here:

  

• Microsoft cryptographic services. Is registered in the framework of the SP3, but is absent.

  Is registered in the framework of the SP3, but is absent. I ran the Microsoft Fix it 50528 recommended solution that appears to run successfully the service is not yet installed.

  Hi Ronnie,.

  You use Intel Rapid Storage Technology program on the computer?

  If you are using Intel Rapid Storage Technology program, I suggest you to update the driver for the same thing:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=software+products&ProductLine=chipset+software&ProductProduct=Intel%C2%AE+rapid+storage+technology+%28Intel%C2%AE+RST%29

  Let us know the results.

• The framework of the call works on a Dev Alpha device?

  Hello

  The framework of the call (to share of text or files to an application via the share button) works on a Dev Alpha device?

  It's my bar file - descriptor.xml - I want to register my app for the menu to share with the text:

    default false  John Deer AppIconsForPublish/appname_1280x768_splash_landscape.jpg core.media  100 1.0.0.0  AppIconsForPublish/appname_114.png John Deer1234567890
  
   VIEWER bb.action.OPENtext/csvtext/xlstext/plain  
  
    APPLICATION  bb.action.SHAREtext/csvtext/xlstext/plaintext/*  
  
  run_air_native
  
  
  

  Is there something missing?

  Thanks for all your comments!

  Vibes

  I should start by individual tests and see if it works.

  I leave you a few samples I saw and work:

  Share your app from the text:

  
        APPLICATION
       
           bb.action.SHARE
           text/plain
          
       
    

  Share the link with your application:
   
      APPLICATION
        
               bb.action.SHARE
               *
              
        
   

  This one is for opneing my app with local files with these extensions:

  
          APPLICATION
          
              bb.action.OPEN
              *
              
              
          
      

• Since then he move to Windows 7 pro, the shared link will open the program, but the database is not up to date.

  I have a .net programming when it was on XP pro it worked fine. Since moving to Windows 7 pro the shared link will open the program, but information is not updated, because it seems that she has created its own database with information from the local computer is installed on and is not matching the information. For example, if the local computer is mapped machine upon receipt #25 is the #15 and should be on #26 and showing all the other receipt printed by the local machine. but its starts from where it was stopped 2 days ago, and is not followed.

  OT: .mdb problem with WIN 7 pro

  Thanks for all the help, I need it!

  Hello

  The question you posted would be better suited to Windows 7 IT pro community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• How to retrieve the RADIUS shared secret key on the WLC 5508

  Hi all

  The wirelss privious admin left our company and did not let the other know the shared secret key on the WLC 5508 Radius.

  The 5508 WLC runs on the 7.0.98.0 code. I can access the viao WLC CLI and GUI. I can also access the Win2003 Radius Server, but the button displays an asterisk for me. I have listed partial RADIUS config of the WLC below. How can I get the RADIUS shared secret key? Thanks in advance.

  (Cisco Controller) > show RADIUS summary

  Vendor Id backward compatibility... People with disabilities
  Call Station Id... lower case
  Dial the Station Id Type... IP address
  Aggressive failover... Activated
  Keywrap.......................................... People with disabilities
  Rescue test:
  Test Mode.................................... Off
  Probe of username... cisco-probe
  Interval (in seconds)... 300
  MAC for authentication Messages... hyphen delimiter
  MAC for Accounting Messages... hyphen delimiter

  Authentication servers

  The State of the Port Address Type server all RFC3576 IPSec - AuthMode idx / phase 1/group/life/Auth/BA
  ---  ----  ----------------  ------  --------  ----  -------  ------------------------------------------------
  1 NM 10.xx.18.48 1645 on 2 off off - no/unknown/group-0/0 None/None

  Accounting servers

  The State of the Port Address Type server all RFC3576 IPSec - AuthMode idx / phase 1/group/life/Auth/BA

  -Other - or ITU (q)
  ---  ----  ----------------  ------  --------  ----  -------  ------------------------------------------------
  1 N 10.xx.18.48 1646 enabled 2 N/A disabled - no/unknown/group-0/0 None/None

  Kind regards

  Robert

  You can retrieve the RADIUS shared secret key as other passwords that are stored on the WLC by using the procedure at the following link:

  https://supportforums.Cisco.com/community/NetPro/wireless-mobility/begin-wireless/blog/2011/11/04/recover-wepadminguest-account-password-from-WLC

  NOTE: WPA keys are not available through these methods.

  Basically, you can enable password in clear text on the wlc with 'config passwd-cleartext enable' and then issue a "view orders of the running-config' - your RADIUS configuration command should now display the shared secret.

  -Pat

• Framework of the CSF

  For a framework of the independent csf program my passwords are smooth and wanted to be encrypted or typical

  Ok. You can use Base64Encoder to encrypt your password and Base64Decoder to descrypting your password. Don't forget to set encrypted password in your properteis instead of a text file that you can easily retrieve using the resource group and decrypt.

  In addition, providing reference thread below:

  http://StackOverflow.com/questions/4487525/encrypt-and-decrypt-a-string-in-Java

  ____

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find.

• Hi I was doing a tutorial on spllcing images and am confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi I did a tutorial on the splicing of images and I'm confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi, Yona,.

  The application is available for Mac machine and not a windows machine.

  Concerning

  Rohit

• Hi, I would like to add an image in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  I would like to add a photo in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  Just add your photo on a higher video track, it will cover up to a below. You can use the effects of movement to move and scale the image.

  

• When you run Fusion on a Mac, where a shared folder appears if the virtual operating system is another version of Mac OS?

  I have a Mac under VMWare Fusion with "Snow Leopard Server" running as a virtual OS, invited.  The instructions say I can specify a shared folder to shared between the Mac OS and Mac OS virtual.

  I've specified a folder, however, this folder is not matter where displayed on the virtual server. Maybe I have no idea where it should appear, then maybe that I'm in the right place.

  Anyone know where I can find the shared folder in a version of the Mac OS running virtually in VMWare Fusion?

  (There are instructions on where to find a shared folder for Windows and Linux, but none for where it should appear for a virtual machine running under Mac OS). Thanks for your suggestions, you can offer!

  Best wishes

  Jeff

  Using VMware shared folders requires VMware Tools installed in the guest operating system, you have installed VMware Tools?

  If so make sure that you have enabled in the settings of the Virtual Machine to the shared folders and have added a shared folder.

  If this has been done should be a customer alias for shared folders of VMware desktop operating systems.

  If there no client VMware Shared Folders alias on desktop operating systems then in a Terminal doesn't issue the following command to make sure the system and user VMware Tools Daemon to run.

  PS to the | grep vmware

  The output should display information for two instances of vmware-tools-daemon.

  kextstat | grep vmware

  The output should list several extensions however is that associated with the VMware shared folders: com.vmware.kext.vmhgfs

  Also search /Volumes VMware Shared Folders as is the mounting point on OS X for VMware shared folders.

  Post edited by: WoodyZ - additional command to check the extension of the core related to VMware shared folders.

• Application of a few framework using the workflow of discussion. As an option you

  Application of a few framework using the workflow of discussion. Optionally you can click to watch the forum/topic and then there are option, I want to understand just what that (subscribe) means. Look at the topics/forum email user what value subscribed the Add option.

  Everything that applies to Framework portal application.

  Especially for the Discussions, Yes. Note that the Discussions and subscriptions are independent services of spaces (one year previously there used a license called 'WebCenter Services', where spaces have not been included). The button 'Subscribe' is, then implemented in a workflow, you can add to your application. In fact, Services can be consumed by other portals (such as Weblogic Portal) - in this case, the workflow must be implemented through the other environment.

• Legal framework of the extension of IDML

  Hi guys,.

  I am doing a project of PoC on Adobe Digital Publishing Suite. And I'm continuing IDML as language of communication through several phases of the application.

  Now I'm in a situation where I have to add a few additional tags to IDML to meet our requirements.

  I need to know if this action is legal. Can you please provide me a resource where I can go and check out the legal framework of the present.

  It's really appreciated if you can help me on this.

  Thank you in advance.

  Hi rushmin,

  What you do with your IDML belongs to you. The worst that will happen is that InDesign is perhaps not able to open it.

  Thank you

  OLE

• [CS3, ACE] Head Turner: Image shot differently in the framework of the tour...

  It is possible to get x, y coordinates of each angle of a rotating column?

  ... and from every corner of the limits of the image contained in the said framework?

  Difficulties with positioning when re-linking an image in a frame rotating turned out differently after editing in PS. Image appears to move slightly to the right and downwards.

  So far, close but smoke in the absence of cigar.

  You can get the values for the frame by getting "full path of channel 1 of the ' it. You can rotate the content framework so the image is without rotation, do your sums there, then cancel to put it back.

• best practices or framework for the design of OSB(11g) process

  Hi all
  
  We worked in oracle 10g, now in the new project we will use Soa suite 11 g. For 10g, we have designed our services very similar to the framework of AIA. But since the introduction of OSB 11 g we are not able to exactly fit the frame of the here AIA because the BSO has a different structure of the BSE.
  
  Can anyone suggest some design framework for the design of processes in OSB or 11g SOA Suite or best practices?

  http://download.Oracle.com/docs/CD/E12839_01/integration.1111/e10223/04_osb.htm

  http://www.Oracle.com/technology/products/integration/service-bus/index.html

  Kind regards
  Anuj