Shuffle drive letters on the computer?

Similar Questions

• I got a new hard drive put on the computer the other was exhausted him, now I'm having trouble sending emails and responding to them?

  I got a new hard drive put on the computer the other was exhausted him, now I'm having trouble sending emails and responding to them?

  Hello

  Because the problem is with Hotmail, I suggest you to post your questions in the Windows Live Forum.

  Here is the link: http://windowslivehelp.com/product.aspx?productid=1

• How to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7

  Original title: window 7

  Hi can one tell me how to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7, I just brought Office 2016 and he did not finish the load down with the windows key 7.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

• Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  Hello

  See how you go with this great piece of software.

  http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

  Concerning

  GT4U

• How to associate VM Windows drive letters with the vmdk file?

  Guys,

  I couldn't find a forum ESX 3.5, so post the question here.

  # vmware - v
  VMware ESX Server 3.5.0 build-317866

  with Windows 2003 SP2 invited and many readers of mouted on clients.

  I need to know how to map the Windows drive letters to the vmdk files on the host. for example

  C:\ > hand NET
  

  Share name resource remark

  ---------------------------------------------------------------------
  $           R:\                             Default share
  $           B:\                             Default share
  $           C:\                             Default share
  $           S:\                             Default share
  $           X:\                             Default share
  $           P:\                             Default share
  $           Y:\                             Default share
  $           Q:\                             Default share
  $           I:\                             Default share
  $           F:\                             Default share
  $           W:\                             Default share
  $           G:\                             Default share
  $           D:\                             Default share
  $           T:\                             Default share
  

  
  

  [root@esx01 DB1] # ls-l *.vmdk
  -rw - 1 root root 142807662592 6 June 2008 DB1_1 - rdmp.vmdk
  -rw - 1 root root 367 14 Jul 22:02 DB1_1.vmdk
  -rw - 1 root root 285615325184 6 June 2008 DB1_2 - rdmp.vmdk
  -rw - 1 root root 367 14 Jul 22:02 DB1_2.vmdk
  -rw - 1 root root 1073741824 6 June 2008 DB1_3 - rdmp.vmdk
  -rw - 1 root root 363 14 Jul 22:02 DB1_3.vmdk
  -rw - 1 root root 142807662592 6 June 2008 DB1_4 - rdmp.vmdk
  -rw - 1 root root 367 14 Jul 22:02 DB1_4.vmdk
  -rw - 1 root root 128849018880 6 June 2008 DB1_5 - rdmp.vmdk
  -rw - 1 root root 367 14 Jul 22:02 DB1_5.vmdk
  -rw - 1 root root 37580963840 Sep 26 17:58 DB1 - flat hard
  -rw - 1 root root 337 14 Jul 22:02 DB1.vmdk
  -rw - 1 root root 287762808832 8 November 2008 FOO-DB1_1 - rdm.vmdk
  -rw - 1 root root 364 14 Jul 22:02 FOO - DB1_1.vmdk
  -rw - 1 root root 21474836480 18 April 2009 FOO-DB1_2 - rdmp.vmdk
  -rw - 1 root root 374 14 Jul 22:02 FOO - DB1_2.vmdk
  -rw - 1 root root 42949672960 18 April 2009 FOO-DB1_3 - rdmp.vmdk
  -rw - 1 root root 374 14 Jul 22:02 FOO - DB1_3.vmdk
  -rw - 1 root root 429496729600 10 October 2009 FOO-DB1_4 - rdmp.vmdk
  -rw - 1 root root 350 10 October 2009 FOO - DB1_4.vmdk
  -rw - 1 root root 429496729600 10 October 2009 FOO-DB1_5 - rdmp.vmdk
  -rw - 1 root root 376 14 Jul 22:02 FOO - DB1_5.vmdk
  -rw - 1 root root 107374182400 18 December 2010 FOO-DB1_6 - rdmp.vmdk
  -rw - 1 root root 376 14 Jul 22:02 FOO - DB1_6.vmdk
  -rw - 1 root root 107374182400 18 December 2010 FOO-DB1_7 - rdmp.vmdk
  -rw - 1 root root 376 14 Jul 22:02 FOO - DB1_7.vmdk
  -rw - 1 root root 161061273600 Sep 27 2008 FOO - DB1 - rdmp.vmdk
  -rw - 1 root root 374 14 Jul 22:02 FOO - DB1.vmdk

  I need to know what vmdk is used for the drive in the Windows of the client prompt. I'm afraid that I could not understand it in the vmware.log or hostd.log files.

  Thank you!

  Steve

  Hi Steve

  You cannot map the drive letter for the vmdk directly, but you can map the drive Win on a specific vm using the SCSI number

  An easy way to map the vmdk with disks of Windows is:

  On the virtual machine 'change settings', note in down all the vDisks SCSI address example (disc 1 = SCSI (0:1), 2 HDD = SCSI (2:4)))

  If you go to Windows disk management and right click the individual disks and select Properties, you will see that target and LUN ID discs

  where for 1 HDD = SCSI (0:1), 0 is target ID and LUN 1 ID and 2 HDD = SCSI (2:4), 2 is target ID and LUN 4 ID

  You map just for numbers of hard disk drive letters

  Please allow points to useful/correct answers

• Satellite P70-A01D: change the drive letters after the 2nd SSD upgrade

  I think it's a generic UEFI / Win 8.1 question (not according to model).

  However, FWIW, I have a Satellite P70-A01D (bought locally here in Australia).

  It is a victory of 16 GB 17.3 inch Gen4 i7 4700MQ Intel HM86 8.0 64-bit RAM.
  http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01d002/specifications

  I updated the OS to Win 8.1

  The P70 is supplied with a drive Bay HARD vacuum #2 - I bought a 250 GB Samsung 840 EVO SSD that I want to use as the main system disk / boot Win 8.1.

  I installed this SSD in bays #2 and from there I had no problem using the wizard of Samsun cloning software provided with the SSD (VCC 4.0) to clone my 1 TB on the SSD system.

  There are a lot of instructions from Samsun and around the web on how to clone and "substitute" of a HDD with a SSD - however there are much less when it comes to 'Add' the SSD - in the #2 Bay - while always keeping the original HDD fully functional as an additional drive.

  After execution of the cloning software, I tried just go into the settings of the UEFI on reboot and change the order of the boot drive placing the SSDS over HARD drive.

  It worked but there are obviously questions still as I had not renamed readers SSD worked as system but he was editing as D: and HARD drive was still C: and most of the system/application paths were always scheduled to access C:!

  It led to the crash and restart cycles of the Bureau (? & or explorer.exe?) and two consistent error messages:
  -"SkyDrive engine Sync host has stopped working".
  -"Host for the synchronization setting process has stopped working".

  I saw in the Control Panel-Administrative Tools-Computer Management-Online Storage-online-online right click on each drive disk management online online that I can access > however
  (a) I'm not sure if the solution I need is this simple;
  (b) nervous about change of letter on a disk while running the system; and
  (C) uncertain steps in order of evolution [IE. C: (non - sys) becomes M; D: (sys) becomes C:...

  At the moment via UEFI I'm back to working with the system on the HARD disk rather than on the SSD seems stable and without compromise of my screwing around!

  Apologies for the long post by train to make sure to include all relevant information. I think that my final goal is double win bootable 8.1 / Ubuntu 12.04 of the SSDS probably with Ubuntu on a 50 GB partition leaving 200 GB (enough?). I want to keep a slab of SSD space available for photo and video editing: +/-100 GB!

  I wondered simply assign new letters to readers, however the notes at the bottom of http://windows.microsoft.com/en-au/windows7/change-add-or-remove-a-drive-letter state:

  You cannot change a drive letter if the drive is a system partition or a boot partition.

  Suggestions please?

  Hello

  I think you could try to change the letter to readers as suggested in the Microsoft article.
  Where this is not possible, try to use 3rd party such as GParted software.
  http://gparted.org/LiveUSB.php

  You could try changing the drive letters might start to the top of the unit using the live USB version.
  But it might be possible that your system would not initialize correctly after this change.

  So you should not forget to mark the partition as bootable.

  Your comments would be appreciated

• Presario 2195US original audio driver freeze all the computer in Win7

  Hello friends!

  I'm new to the forum, and I am here because everything could not solve my problem.

  My Compaq Presario 2195US has an upgrade of RAM 1 GB in total and I installed Win7 on it. In the adaptation of the drivers, everything goes very well with compatibility adjustments and new downloads of drivers for my hardware, but there is no video and audio drivers for win7 - now I'll explain the audio problem:

  I installed the audio driver in XP compatibility mode and the driver installed fine (without adjustment of the installation program compatibility is not identify the sound card) and the manual installation of the driver by pointing devices Manager worked too. When everything seems fine, when some audio is played, during playback of audio, sooner or later the computer freezes absolutely and repeat the short sound of the moment of freezing indefinitely. The sound becomes something like tun-tun-tun-tun-tun-tun-tun-tun-tun with the screen freezes and only a reboot is possible - the mouse does not move and ctrl-alt-del is the same anything.

  I use the computer with his disabled card, but I need to get to work. The problem seems to be something small, but I have no knowledge to edit my audio driver to resolve the issue. In some of these blocks, I saw that when I'm on the windows media player window and clicked on a folder in a window behind it, the computer freezes, but it was just an observation. Gels are independent of the application that I use. The use of the sound card on sort may freeze the computer. I need help hard here and we hope that someone trying to solve. Thank you in advance.

  Hi - Caio-,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your Compaq Presario 2195US Notebook and having Audio problems with Windows 7 drivers. I would go to the Device Manager and do a right click on the audio adapter (if more 1 present I delete them all and restart the computer) in your devices and update the driver manager. Restart the computer and see this help. Here is a downloadthat I found for the audio driver, it is a third party site.

  Hope it will be useful.

  Thank you.

• How to keep the drive letters between the BONES of switching?

  1 HARD drive contains C: for OS + q: for the backup + w: for backup

  Drive HARD 2 door V: for OS + D: data + T: for backup

  3 HARD drive contains X: for OS + Y: for Backup + z: for backup

  When I put HDD1 active drive for operating system in the BIOS, and before drive letter, which works fine when I start window, but

  When I put HDD2 active disk for OS within the BIOS and above randomly changed drive letters.

  I would like to know when I put HDD2 active disk, will the letter v: replace C:? How the handle of the window of the drive letter when changing OS disk from HDD1 to HDD2?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  If Windows was installed on a partition C: drive and cloned the drive with two partition v.

  Windows must change the letters if a player is off arrangement.

  the clone is an exact copy from where it comes.

  try to put two in the car which was driving one and then change the letters for all that.

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• USB MTP driver fail when the computer is connected to the domain

  Hello

  Please help me solve this problem now, I had an old thread who died http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer= http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http: //social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/

  Please note that the cause of the problem is already, I don't want no information on reg-patches and such.

  After connect us any computer to our area, the PnP for cameras (eg. iPhone) does not work.

  Tested on several models with the same result, always work before the computer is connected to the domain.

  I can't find any setting in our group strategy which must affect installation.

  You can find the log files from the same computer, created during the installation of the MTP (with an iPhone)

  https://anonfiles.com/file/9bf2a47c44cdb2f589d544924c6ffd2b

  MTP_domain.log has been created on a clean Windows 7 64 bits connected to our domain

  MTP_no.domain.log was created on a Windows 7 64-bit clean

  Hello
   
  Unfortunately, the question you posted would be better suited in the TechNet Forums. I would recommend posting your request again in the TechNet Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
   

• Satellite Pro A200 (PSAF4A) - HARD drive stops and the computer crashes

  Hello

  It's my first post in this forum, but certainly not my first issue

  I recently had to re - install Windows Vista on my laptop because I had an undetectable virus that attacked Windows and made him useless.
  Before that, I had many, many startup errors and windows crashes, but which were preventable or fixable. After the re - install, I noticed that windows stability was much better until recently.

  I have not changed the settings or anything what so ever on my computer laptop which could affect the performance somehow, but I have a new problem.

  If I have my computer running, performing tasks of base for a few hours I notice that performance and all of a sudden my computer completely stops responding.
  The disk shows no signs of life after this point, and his only solution is a "disruptive Shutdown.
  This appears in the reliability monitor and performance that all this, there is no input error, and nothing is done after.

  I also noticed if either windows defender or other my antivirus runs a system scan that my performance is reduced to the point where I can't run a simple task like opening an Explorer window. This also translates to total non-response. This never happened before a week ago and now it happens every time.

  These two started within the past few days and there is no clear reasoning behind it. My inactivity of the processor is always the same, no new processors added and no settings changed.

  This could be a problem with Windows, my HARD drive, my CPU or something worse?

  Is there a reason why is happening and is there a solution either of these problems?

  First of all, you reinstall Windows with the Toshiba recovery disc or disc of Microsoft?

  It's strange and not easy to say what's wrong, but in your case I would test the RAM and HARD drive.

  There are special tools to test the following:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  http://Memtest86.com/

  On the two Web site, you can download a CD image. Burn it to a CD, start with him and then you can test parts.

  Good luck!

• Retreival of data from the old hard drive - it freezes the computer when it is connected to the outside

  I have a dell laptop and last week he showed the blue screen and does not start. I got improtant data on starting I have is not a format and replaced with a new hard drive. Now I'm trying to connect to the old hard drive externally detected only D & does not detect drive C on what it blocks my laptop. I tried with other laptops & systems also, but it's the same thing. I have important data in two players. Please suggest a possible solution to recover data.

  Hello

  • What is the blue screen error message that you receive?
  • Have you tried plugging the drive with another computer?
   
  You can check this link:
  http://support.Microsoft.com/kb/322205
   
  You can also try updating the chipset drivers on the manufacturer's Web site.
   

• DVD RW drive disappears from the computer and the Device Manager on Windows 7 ultimate 32 bit

  After upgrading Vista to Windows 7, my DVD RW drive will disappear from official view and computing device and a scan for changes on the material or use of the player will not solve. Resolves a reboot of the PC (HP - Sony DVD RW desktop computer).
  It appears in the BIOS and when the first install Windows 7 found and the device manager reported everything is ok. It seems that after a power management feature has occurred and the PC wake up the disc is missing and the only way to return it is a restart.
  Help, please

  Thanks for the info, I had seen it work elsewhere on the net for similar problems with Vista, but not of joy as the either the upper or lower part reg entries appear under this subkey. They do it for the disk subkey but no CDROM

  Hibernation is disabled and I use power management to High Performance with only a screen sleep as a default 20 mintes and the hard drive after an hour of sleep. I upped since the two of them to see if that helps.

• Incorrect driver installed on the computer.

  So I installed a program called the "Bluestacks App Player" from a few months back. It's basically an emulator designed to run Android on PC applications. When I downloaded first, he told me that she needed a newer driver. I thought it was weird, because Windows update is supposed to keep my drivers up to date automatically, but decided to go with her when even (because, you know, these birds Flappy urges...). Anyway, as soon as he installed the driver, my screen went black for about 10 seconds. Then the screen came back, but with a very old Windows design that I had seen before only when I booted my Windows 7 laptop in safe mode. After a minute or two, the screen has disappeared and then reappeared with the normal Windows 7 and updated design page. I started the program kkkkk and it worked fine and I was able to play some of my favorite on my laptop Android apps (Temple Run, Flappy bird, cut the rope, etc.). I thought it was really cool and decided not to do a system restore, despite fear of blacking out screen / display the safe mode of Windows style. After a month or two I had almost forgotten this topic.

  However, the other day when I was watching videos on Youtube, my screen blacked out for a few seconds before reappearing. An error message appeared, which I ignored him, assuming it was a glitch once. However, a minute later, when I was watching another Youtube video, the new screen blacked out for a few seconds. This time, I read the error message. (see attached image).

  My first thought was "what the f *! I have not even Windows 8 is installed. My machine came with and always had Windows 7. »

  So my question is, why I apparently have a driver for Windows 8 (R) installed on my machine? A compatibility issue between this driver Win 8 and my Win 7 OS could be cause my intermittent screen crashes? Also, is there a way to tell what drivers I'm supposed to be on my machine?

  Here's another picture. "programs" that were installed with

  KKKKK. Some of them as they have installed the drivers.

  Any help / advice would be appreciated. (But don't just tell me to do a system restore / repair installation.)

  Hi Jeffrey,.

  Thanks for the reply.

  I suggest you refer to the figure below. Click on the link given in the red zone. Try to install it on your computer and check. This driver is for Windows 7 (64-bit).

  

  It will be useful.

• Cloning of a disk failing on a new drive has left the computer unbootable

  I upgraded my hard drive because it is run in mode only PIO makes it incredibly slow. Some cloning software using different, I made a clone of my drive to a new drive. No matter what method or the brand of software that I use to clone the drive, whenever I try to start after the end, I get the same error "the ARC firmware startup configuration problem: has not correctly generated name of ARC for HAL (it will)..." "Is it a security measure built into XP to prevent me from cloning the drive? I lost days now trying to clone my whole disc rather than doing a complete new installation of the OS and all software. Any ideas on this would be useful.

  Ok. I don't get all the answers to this good. What I ended up doing was using a disk to reinstall XP boot to the recovery console and do a Fixboot difficulty MBR, then a bootcfg/rebuild. Seems to have solved the problem.