silent / ring switch does not work IPhone 6s

Similar Questions

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• custom ring tone does not work

  After the update this morning I hope this question was correct.

  I use a custom for some people to know how ringtone call by ringing. But nothing changes.

  It does not work.

  Nobody knows or has heard of this problem?

  Thank you

  Try these general steps. They could help.

  1 reset your iPhone by pressing and holding the sleep/wake and home buttons.

  2 disconnect you from your iCloud account and reconnect again.

• on/off switch does not work since the SIERRA

  Hello

  Since I'm sierra os that the on/off switch does not show me the dialogue window in which you can choose between power, reset, disconnect you.

  This is a problem of Sierra? There is an option in the system Pref?

  Thank you

  It works very well in the Sierra.  Simply press the button longer.

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• Satellite L350D (PSLE0E) - WIFI hardware switch does not work

  Hello!

  Next problem: since yesterday, I have Windows 7 on the laptop, almost everything works perfectly. Not been necessary to load the drivers from the Toshiba site, Win 7 provides with the pilots, the rest comes via update...

  What does not work is the Wi - Fi switch. Whether on or off - Wi - Fi connection is always on, or in other words, the switch has no function.

  Someone at - it similar experiences and perhaps the solution?

  Thank you and excuse my English

  Hello

  This strange because the hardware WLAN switch should always work because s he based material s

  Anyway, in your case, I'll try this:
  -Updated the BIOS and load default settings
  -Update the WLAN driver

  One more interesting thing: can you turn the WLAN functionality by using the FN + F9 key combination?

• Satellite L300 - wireless switch power switch does not work

  I installed XP on my L300 - 110 (PSLB0E), cause I don't like Vista. I installed all the drivers, and everything is quiet OK. But one thing little annoying me - wireless, switch, it does not work. So I can turn on Wi - Fi only by pressing Start-> connections and so on.

  I need help! Who can tell me, what driver or software do I need to install? Thnx a lot!

  Hello

  Do you mean the hardware switch on the side of the fron of the laptop?
  Normally this switch still works because he founded material s and must always be defined on IT if you want to use the WLAN and OFF to disable WLAN.

  Have you tested the switch on OS preinstalled Toshiba? Maybe it's a hardware problem

  Make sure that the latest drivers are installed!

• Satellite L40-18 X - wireless switch does not work

  Hello

  I installed Windows 7 on Satellite L40 - 18 x, PSL48E, the installation seems correct. After installation I noticed that the wireless switch on/off (power) switch does not. The wireless network is working except the functionality of switch.

  It worked on Windows Vista. I installed all the up-to-date drivers for the network card wireless, including atheros, configfree, chipset drivers, but no effect.

  Please can someone tell me the possibole solution?

  concerning

  Salahaddin

  Hello

  I agree with resident.
  The Wlan switch on the side of the laptop has all the drivers and it works independently of the installed software!

  The FN + F8 key combination that allows the WLan should work on if install you value added package.

  You should also check if the WLan card is set on IT in Device Manager-> properties-> Advanced tab WLan card.

  See you soon

• Why my case of the switch does not work?

  Hey gang,

  I have a switch statement, but it doesn't seem to work.  When the selectedIndex to a drop-down list property changes, the fire of console.log statements, but the currentFlashMode never is updated.

  currentFlashMode is 'property variant currentFlashMode' on the element root of navigationPane on another page.  This switch/case is on a secondary page that is pushed.

  If I use if/else instead, everything works fine.

  for example, it does not:

                     switch (selectedIndex) {                   console.log("entering switch/case for selectedIndex..");
                          case 0:
                              //
                              console.log(" -->App: FlashModeSelector, On");
                              currentFlashMode = 0;
                              break;
                          case 1:
                              //
                              console.log(" -->App: FlashModeSelector, Off");
                              currentFlashMode = 1;
                              break;
                          case 2:
                              //
                              console.log(" -->App: FlashModeSelector, Auto (default)");
                              currentFlashMode = 2;
                              break;
                          case 3:
                              //
                              console.log(" -->App: FlashModeSelector, Light");
                              currentFlashMode = 3;
                              break;
                      }
  

  but this doesn't:

  if (selectedIndex == 0) {
                          currentFlashMode = 0;
                          console.log(" ------------>App: in onSelectedIndexChanged, currentFlashMode is : " + currentFlashMode);
                      }
                      if (selectedIndex == 1) {
                          currentFlashMode = 1;
                      }
                      if (selectedIndex == 2) {
                          currentFlashMode = 2;
                      }
                      if (selectedIndex == 3) {
                          currentFlashMode = 3;
                      }
  

  What I'm doing wrong here?

  Hello

  This is a known bug in Qt 4 (fixed only in Qt 5):

  http://supportforums.BlackBerry.com/T5/native-development/strange-switch-behaviour-in-QML/m-p/228142...

  Only the first line of each statement 'case' is executed. QT has incorrectly transformed the second statement back.

  Workaround: wrap each case in {} or use instead if/else.

  More info about Qt bug tracker:

  https://bugreports.Qt-project.org/browse/QTBUG-17012

• My Pavilion g does not start. The switch does not work. Any ideas how to start the computer?

  My laptop series HP Pavilion G7-1135sd will not start. I get no response from the switch. Some lights come but the display does not illuminate. I tried holding down the power switch for long periods - without success. I tried to take out the battery - also without success. Any ideas?

  Hi @DutchyH,

  Welcome to the Forum.  Sorry to hear of your problem power button on your HP Pavilion g7-1135sd.

  In a situation like this.  You have removed the battery and tried to push the power button with out.

  Have you tried while he was not powered as well.  So basically, remove the battery and hold the power button for 40 seconds with the power cord not plugged in.  Then replace the battery followed by power cord.  Then press the power button again.  If it does not at this stage I would contact HP support by phone.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Telephone support for other regions.

  I hope this has helped you.

  Thanks again for posting and have a great day.

• Adobe model does not work iPhone 6 sec more

  model of Adobe will not open. Goes to the start screen and hangs. IPhone s plus 6. iOS 9.2. All other Adobe applications (creative cloud, draw.) Photoshop fix, mix, and sketches) work very well.

  Just to close thread, uninstalling computer did not work; I had to uninstall comp and creative cloud app and reinstall both.

• Re: Satellite Pro U400 PSU41E - com wireless switch does not work after Win7

  Hello

  I did an upgrade from 32-bit Windows 7 Professional (clean install) to my SatPro this week, and almost everything is fine. I reinstalled Win7 readers listed on this site and my software with no obvious problems. I say almost because the switch for wireless on the front of the unit has stopped working.

  Previously with the switch pushed to the left of that internal map could be put off, it remains now on. The light goes out! The wireless card works OK and connect to home and office wifi networks, but I can not turn off when connected using a connection cable.

  Any thoughts on how to restore the switch function? I have looked for the readers, but cannot identify all.

  Thank you
  Spencer

  Hello

  Once, I had this problem on my A500. I pressed Fn + F8 to disable wifi and switch pushed to the left, in any case just to play with it. In my case, it helped me.

• Applications using cmd + tab switching does not work (reverse return) when you use several spaces in the Sierra

  I usually have a lot of apps open it in full screen across a number of different areas.  In El Capitan, when I used cmd + tab to switch apps, it would just go directly to the application in the entire app was opened in.  Now, he tries to switch to the app, but then IMMEDIATELY switches to the space, in that I was already.  It's like if someone is sitting there playing this cruel on me joke where whenever I try to go to the app, it shows to me and then immediately sent me immediately.  Everyone knows something similar to this?

  To re-create the problem, have a few apps open it in full screen in different spaces, then try to switch to another application in another space using cmd + tab or try to switch to an application that is just open on the main office space.  It comes immediately rebascule on your original app!  I'm ready to tear my hair out!

  Feedback: Apple http://www.apple.com/feedback/

  With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers

  Bug Reporter https://bugreport.apple.com/

• My lock switch does not work

  the lock switch is on (orange are visible), but the ipod can still be used

  Try to do a Reset (reboot iPod)

  Learn how to reset your iPod - Apple Support

  If the problem persists, try the more likely cause is a faulty Hold switch.