simple dotted?

Similar Questions

• Simple dotted in illustrator with javascript?

  I need to start to understand the part about dotted in way of drawing in illustrator.

  Clues? Thanks in advance.

  Yes, until you start to do the path, set the default line like this

  idoc.defaultStrokeDashes = [2,3,2,1];
  

• density of mixture over entire length?

  "Dotted" starting with two circles and do a mix. You can control the density with "steps" and the number of steps.

  do this same line dotted longer by the movement of the circles, but the change in density. You can set up the number of steps, but is it possible to make for any length, you end up with the same cirles or points per unit length?

  what I'm going to is perforated, as on a ticket of... one end of the ticket is short, the length is longer, but the same number of holes per unit length is necessary.

  so far, I made a long one, then using short side... in the hope of something more reliable.

  Thanks for all the ideas!

  Looks like you are looking for the Distance specified option located in the blend Options dialog box.

  On the other hand, you can try brushes model or simple dotted lines.

• Qosmio F30 - green blocks and the white vertical dotted lines

  I turn it on and it starts to initialize. However, I get green blocks on the screen and the dotted white then wertical, then a black screen.

  Can someone please help with this?

  Hello

  Just a simple question: If you have connected an external monitor?
  Maybe the screen inside is defective and so these lines appear and you can t see Windows.
  Check this box!

  In the worst case, it s related to the motherboard or graphics card and they must be exchanged. :(

• Remove white dotted inch photo

  I have deleted hundreds of photos and now have hundreds of white dotted inches were the photos were. I have tried everything I can find on the web about to get rid of him, removing cash, plists, cutting nothing works. They just won't go away. I have rebuilt the thumbnails, restored the library data. What happens and why is what happen. . It seems, that it should be simple to get rid of the pictures you want. Appreciate any ideas thanks

  No matter the problem is resolved.

• Hello. Does anyone know why a dot on my videos but not my photos? Thank you.

  Hello

  I'm pretty new to DSLRs and I have a strange problem, I hope you pros can help with

  I recently had a canon t3i and use it mainly for video. A small dot (see below, in the yellow circle) has appeared in videos. It is always in the same place and it did not exist before. At first I thought there was something on the lens, but no, and the strange thing is, the point does not appear when I take still pictures, only videos.

  Nobody knows what this could be and how can I get rid of him?

  Very appreciated

  Vlaminck

  

  This likely dust on the sensor – don't be not alarmed, it is ordinary and easy to clean.

  There are actually two filters in front of the sensor - then 'dust on the sensor' is really the dust on the filter (nothing can really touch the sensor.)

  Most of the models of rebels have a self-cleaning - mode but it uses a piezoelectric effect vibrates the filter and I hope only to shake loose dust.  He used to always work.

  If this does not work, you have two options... it take a photo shop to clean (some stores may practice you a little money... even if I've heard of places that charge customers $50 - I think that's quite excessive.)  The other option is to clean it yourself.   If you do a lot of photographry, you can learn to do it yourself as well because it is something you will probably need to do from time to time.

  I have levels of aggressiveness that I use to clean a sensor... start by simply using the puffs of air (not very aggressive) and working my way up to the point where if nothing works otherwise, I could have possibly used the wet cleaning (but is almost never necessary.)

  Remove the lens, point the camera down so that the aperture of the lens is facing the ground (or resting on a table).  Turn on the camera, use the menus and select the self-cleaning option.

  See page 184 of your manual.  Basically you press menu, navigate to the #2 yellow key and navigate to "sensor cleaning".  Call the "Clean now" option (you may need to do more than once... but if it is not clear after 2-3 attempts, then the time to move to the next step.)

  By the way, to check if it is clear, put the lens on.  Set the camera to Av mode, compose a value large aperture (f-stop) - say f/16 or f/22.  Now, find a simple white wall (or ceiling) and take a picture.

  It is the sensor dust easy to spot VERY when you have a white non-contraste surface like a white wall or a ceiling AND use a high value of f-stop.

  It is clear, very well.  You are finished.

  If this isn't... next step is to get a hand blower - squeeze - like a Giottos "Rocket Blower.  I do NOT recommend you cans of compressed air.  These boxes will spray a residue (fuel) on the filter if you do not pay attention and then the filter should be cleaned at the wet.

  Access the menu cleaning sensor itself, but instead of "clean now", choose "Manually clean".  This causes the camera to raise the mirror and open the shutter to expose the sensor (really the filter).  Keep the camera pointed down and apply several puffs of air into the camera.  DO NOT let the tip of the fan touched anything inside the camera (otherwise you can mark or scratch the filter and make things worse.)

  If that is not ALWAYS clean, I use a magnifying glass to inspect the sensor to see what I'm working with.  You can buy these brands such as "Sensor scope" and they are inexpensive.

  My next step is to try a VERY soft brush to see if he brushing.  Use without pressure... just a few features very soft and very light should do.

  If none of this works, then it's time for the wet cleaning.

  Buy brand Eclipse cleaning solution (made by "Photographic Solutions, Inc." and transported in more real camera stores (not department stores that sell cameras).  You can also order online.

  You will also need the right size, cleaning swab.  This same company (Photographic Solutions) makes "Sensor swabs" but they come in sizes to fit your sensor.  For cameras with sensors APS - C size (which is what you have), you want a buffer of size of Type 2 sensor.

  OK... the purpose of this next step is do NOT damage your camera buy waste of money (not... "I'm not kidding actually.)

  You will place about 2 drops of Eclipse solution on the end of the cleaning swab.  You use the swab to sweep from one side to another sensor using almost no pressure.  Eclipse is almost pure methanol, evaporates quickly and leaves no residue.

  You will now be IMMEDIATELY discard this swab.  (this is what I mean about the bit 'wasting money').   There are 12 buffers in a box.  You can use a couple of them to clean the sensor.  They are cheap.  Your camera is not.  Do NOT try to save money on cheap disposable pads and risk damaging your camera - because if this swab picked up a little sand, would you scrape little sand on the sensor by reusing the it.  That's why I suggest using almost no pressure AND why I suggest to use the scope of the sensor to inspect the sensor and see what I'm working with.

  A sensor cleaning is not difficult, and if done right, it is not even dangerous.  But if you take anything to him as you have been cleaning a window, then you could make things worse (and potentially expensive to correct.)  Just go slowly.  Inspect everything.  I ran with the assumption that all which is on the sensor will scratch if I do not pay attention (even if most of the time this isn't true) and very light pressure allows to "tease" the offending bit of dust on the sensor.

  When you are finished, simply turn your unit on and put the lens on.  It automatically closes the shutter when you press the power switch.

• Windows Vista crashes, the screen becomes pink with diagonal dotted lines

  My HP Pavilion DV9500 laptop started making a few months ago:

  The computer and the programs sometimes simply freeze, sometimes the screen becomes a light pink with diagonal lines dotted, and sometimes the laptop itself restarts without warning.  The computer is about 3 years old now and have not had any problems before this.  I tried to do a clean install of the recovery feature that I don't have a Vista disc to reinstall from, and he always does this.  Sometimes the computer will be fine for a few hours and sometimes just after the start it will freeze.  A couple of times too, as it starts, Windows will not start and it will say "Not found operating system".

  Hello

  It sounds like imminent hardware failure/issues. Since you did a clean installation of recovery
  pretty much excludes most of the causes of software if it could be driver related and there are other
  possible causes remotely. Video/display and its drivers are suspected leader and mother.
  Board and power supply.

  Keep good backups and check with a real store of the computer (not the leeks and glances at a BestBuy, etc.)
  BigBox stores) or the manufacturer of your system Support.

  ===============================

  It's my generic convenience store and eventually it can help you determine the cause but I strongly
  suspect material.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows opens the files by a simple click rather than double, how can I change this?

  Window 7 file selection clicks

  Windows 7 opens a file with a single click when I don't want to do, I want to just select the file for possible copy or other activity.  How can I force to require a double-click to open the file as good old XP

  If your on simple click to open, what you have to do is (dot) in the file.

  Click to open, tap Select.

  If you want to change this setting go to your libraries you are interested in, click on organize in the upper left corner, and select the folders and search options, general tab, change to double click, save.

• Muse NOT RENDERING content creation simple widget in all breakpoints...

  I was the construction of office oriented websites with Dreamweaver since the late 90s. Just recently started to use the Muse and if SO is celebrated on the freewheel and is 'simple' 'sensitive' Web design (especially the latest version of) Muse, I find my work with Muse REALLY frustrating.

  I (initially) very excited by the promise of Muse is a Web site design process 'free-form '; and I felt 'better' on investment in software that had the support of an international company like Adobe, long a leader in the development of creative applications that allows users to evolve their visual content that they had ideas inside the head of brewing well enough.

  BUT I had a headache after the landing of building-out/adapt one other prototypes of page -I develop in Photoshop then build in (a very old version of) Dreamweaver - within the Muse now. SEE Imaging Services in Phoenix, Arizona: Photo editing, concept art and Lightroom training (Currently only the 'editing' and 'Skunkworks' Dreamweaver-built prototypes are powered and the link to the Company of Lightroom Phoenix works as well. And please NOTE: these pages work very well in multiple desktop browsers, as well on my fone chip so to load quickly even with WiFi a little lame on Chrome for Android.)

  - I'm thinking that each landing in MM-dot-com page will have a different 'look' that each gallery covers distinctly different content of imagery. It is my hope (from everything I read, all the promotional content, I looked on Muse - in particular the most recent update) I was going to find a more responsive and intuitive application to help me in creating pages to current content that I change my prototypes to achieve this goal.

  - It has always been my intention to keep my 'simple' sites and to build the navigation between the pages to be intuitive for the visitor; all animations - mainly rollovers, same rollover events complex (once again for Office display) as I've built here > The Book - chapters: roads, landscape, "Americana", Essays, links and more. Explore. intelligible, not wearing not too much like Candy for the eyes. My target 'public' is the other 'creative', busy people ready to explore, but not become overloaded on "cookie crumbs" in order to see what has prepared a website designer 'visionary' too clever-by-half. Nobody is going to find the patience for this.

  Now - all that said, here's the gist of my post:

  - In a couple of my galleries, it will be important for me to show the 'before' and 'after' versions of an image. (Exclusively Office days bearings worked very well, not so today with touch screens.)

  - So on a couple of separate pages image-the extension, I'm building, I thought using one of "before - after' widgets built by the community of people craft extensions to add content to Muse of coding." In this case, I used "WidgetsForMuse script. (It is quite functional. It's simple. It works as I would like to only it.)

  - HOWEVER, then the widget performs its function perfectly full screen in my desktop browsers that I reduce the viewport to simulate '1024', '786' and small breakpoints that the widget is unable to continue to operate. (Once again, please NOTE: have I not continued to experience a number any other strange events [cross-browser] as I did the other, different [really very "tame"] setting page designs in the efforts of my last month to understand how Muse 'works' so instead of bring this example to the first WidgetsForMuse people, I feel more like there is a problem-oriented Muse more and) ", as such maybe someone else has experienced anything like what I see with my work here.)

  I included a link to this short vid "unregistered" I posted on my Youtube channel for you guys show what I'm running in > problems with Widget - YouTube

  I can certainly describe, explain and post additional-screenshots, maybe another short screen cap of vid how Muse makes my creations page illustrating how Muse seems ' does not not his promise "in future discussions.

  Thanks (in advance) for your suggestions and perspective. mm

  I have the final solution ready to try here:

  Please resize the browser through all the breakpoints 1248/1024/680/480 to see how it works.

  The Widget will be updated Monday (widgetsformuse.com)

  You are able to use as many different 'before - after widgets' as you want on a single page.

  You can leave 'fully sensitive' or set the width at each breakpoint.

  Hope you like it.

• Help: How can I draw a dotted with a pointed end for each dashboard?

  I'm drawing a dotted wherein each dash has a pointed end to indicate the direction. Therefore, each dashboard should look like below.  I tried this every way using the tools related dashed but that you do not find a way. Can someone provide a simple solution please?

  Thank you, John

  

  Draw your shape. drag it from the palette shapes. make a brush model.

• I converted the text to the shape in illustrator and I try to apply a dotted around the shape; However, it does not work.

  I converted the text to the shape in illustrator and I try to apply a dotted around the shape; However, it does not work. Maybe I'm missing a step? Any suggestions?

  

  The settings that you should should work. I agree with sisham, to keep things simple and only put 5 in the first 2 fields, or your H will resemble each other.

  

  Now, you must have something else, and I suggest you select the element and to dissociate in the appearance menu > clear appearance. Then apply the dotted line.

  If you can post your file, am sure we could find what is worrying, but my guess is you have your dashboard applied, and which is overridden by a stroke applied to the group or level of the layer and dashboard you

• What happened to the ability to hide the "mobile dash" (CTRL/CMD (H) in Photoshop?  I can't see the edges of my selection with the mobile dotted lines in the way!

  I used Photoshop since version 2.5 when it came to 16 disks.  In all versions I've bought over the years (many) up to CS3, I've always been able to use CTRL + H (Windows) or CMD + H (Mac) to hide the "mobile dash" edge of the selection.  This is extremely useful when doing all sorts of adjustments where the outline of the selection must be considered while "fiddling with the buttons" (so to speak).  Without being able to hide the limits of selection ("mobile dash"), I often have to get a better idea, cancel the selection, get disgusted that the edge is not what I want, then have to cancel, select new, try again... over and over again.   It is a SIMPLE feature, but the lack of it, driving me crazy.  HELP, I tried, but it doesn't have the height of the promise.  If there is a way to hide the dotted moving line, where is the menu item, and what the shortcut?

  You can assign Ctrl/Cmd-H to hide the edges of the selection (Edit > keyboard shortcuts) only, if you want to hide everything, but you will be notified if any other function has the shortcut.

  

• My dotted line is rendered with an outline of the box. How can I fix?

  Hello

  I am creating a dotted with the widget of simple line line - but a box really made its appearance in the last page (and more), as below:

  

  How can I adjust it only the dotted line appears? I don't see any option for this.

  Thank you very much
  Jeremy

  Check that the widget itself has not had a stroke applied.

  I also recommend that take you a look at my latest gadget that gives you total control over the borders of the frame.

  Better the frame borders Widget for Adobe Muse | Creative muse

  David

• Photoshop CS4 and the mysterious disappearance of mobile dotted...

  There are about ten minutes I was pruning the pictures in Photoshop CS4, the marquee tools suddenly lost their mobile dotted.

  Now, when I click on the Rectangle tool and drag to select an area, the outline of the selected area is invisible--until I have let go of the mouse when it pops up as a continuous line.

  I guess I must have turned off the mobile dotted somehow in error. How can I turn on their return?

  A quick search gives to think I can hit CTRL + H or command + H to put the moving dotted lines on and off. None of them work for me.

  Other suggestions I've found are "reset" of the tool (how?) - or install a new video card, which should not be a problem in my case. I have installed the updates - what literally happened there, in the workplace.

  I use a Mac, OSX 10.8.5 if that makes a difference...

  It MUST be a simple solution "click on such and such." Thanks in advance if you know!

  I think perhaps that you have encountered a bug of display driver (or the exhaustion of resources).  Try to save your work, quit Photoshop, then restarting him.  Chances are that the ants will return for your picnic baskets.

  -Christmas

• dotted lines in illustrator cs5

  Hello

  Is it possible to make lines destroyed and dotted as you can do in indesign cs5 where it is so simple?

  I can't understand.

  Thank you

  Yes, and if you learn about stroke and appearance panels and to experiment with the addition of features and different settings for dashboard creation lines you can accomplish a lot.

  Look at the Panel line a bit more carefully and you will see the option to create lines of dashboard.

  

  Aid has probably changed for CS5 since there is an option designed for CS5 how dash lines are spaced

  in relation to the corners and the paths, the other keeps the exact measurements of the dashboard and the gaps do not consider the ends and corners