Single instance with two sons to redo

Similar Questions

• Regarding the installation of a single instance with ASM in AIX

  Hello
  I try to install a single instance with the help of ASM in AIX. I made the requirements for drives prior to installation.
  I'm running Universal Installer and I choose the option of database to create.
  During the stage of creation of the database, there is a page to choose the types of storage.
  I choose the DSO and then click Next.
  Caution is open and he tell ASM must CSS and it gives the following to run.
  reset of the/Home/App/tuba2/prod / 10 GR 2/bin/localconfig.
  
  I run but my CSS is not started and it gives the following.
  # localconfig reset
  Successfully accumulated necessary OCR keys.
  Creating OCR keys for the user 'root', privgrp 'system '...
  Successful operation.
  Configuration for local CSS has been initialized
  Stale demon CSS is running... kill now
  Adding inittab
  Startup will be queued to init within 30 seconds.
  Checking the status of the new Oracle init process...
  Expected CRS demons to be in place within 600 seconds.
  Abandon: Oracle CSS stack seems to NOT be running.
  Oracle CSS service would not start as installed
  Automatic storage management (ASM) cannot be used until the Oracle CSS service is started
  
  How can I solve these problems. I'm new in ASM.
  Is there anyone to help?
  Is also the way I was using the single instance of the correct installation with ASM? or there is another way that is more efficient for the installation of the database with ASM?

  Technically, there is nothing wrong in what you do. Since your log message, it seems, has already CSS configured on your system and is not in a working state.
  I would recommend, reconfiguration of the CSS.

  Complete the following as root user.

  $ORACLE_HOME/bin/localconfig delete
  $ORACLE_HOME/bin/localconfig add
  CD /etc/init.d
  . /init. CSSD run &
  crsctl check crs
  And you can check the logs for more from diagnosis to the suite.

  $ORACLE_HOME/log /<$HOST>/cssd/cssdOUT.log
  $ORACLE_HOME/log /<$HOST>/cssd/ocssd.log
  / var/log/messages / *.

  HTH,
  Arul.

• Can I run FireFox-26, 0 as two independent process, not a single process with two windows?

  Operating system = MS Windows-7 x 64 Home Basic
  Processor = Intel Celeron B800 (System shows: two processors 1, 5 GHz)

  Hi Alexander,.

  Yes, use a second profile and - no.-argument remote in no default browser comandline or shortened. Post back with how you get where for more information

  Well done John,.

  See

  • Use the Profile Manager to create and delete profiles Firefox
    (Probably the simplest method to create new profiles.)
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile
  • http://KB.mozillazine.org/Testing_pre-release_versions#Installing_multiple_versions

  With the help of several profiles is not something that yell us on this forum. This is I think seen as too advanced. But there is no certain dangers that you may accidentally delete profiles for example. It is however possible to backup profiles manually and that can be a good precaution to take. I strongly suggest you to follow this good practice (at least until you're competent enough to manually recreate and modify profiles)

  1. Used to use the slots offered by Firefox
     It is easier and safer
     • Always use an empty folder
       Other subjects disappear when the profile is deleted
     • To nest within the other profiles
       As stated above, remove mother, lose the child also
  2. Do not rename the profiles of school boards
     Confused, the profile names and folder names mismatch
  3. Do not delete the profiles of school boards
     Just remove shortcuts if it is not in use. Remove the evil and you lose cutlery, passwords & bookmarks etc.

  Uses of several profiles include

  • Trials, with own or temporary profiles
  • Different users, or the type of different work in the same OS account. Which may include different bookmarks files and/or a different set of addons.
  • Running multiple versions of Firefox and/or multiple instances of Firefox at the same time.

  There are other methods of creating profiles, but the best is probably to use the built-in Firefox profile manager.

• Should be changed to two full pages in a single page with two columns

  I have a schedule that is formatted to 8 1/2 x 11 size.  I want to change this option to display two pages on one page into two columns?  How can I do this?  Thanks in advance.

  It's extremely well beyond what is possible or even imaginable for PDF editing. Redo in Word; You can use export as Word, copy paste and export the images as tools to do this. Then again the PDF file.

• Repostiory single connection with two DB or two schemas in db

  Hi all
  
  I connect to my ATG by using FakeXADataSource.properties and JTDataSource.properties database application. Is it possible that I can connect my application to two db or other unique db schema.
  
  Thanks in advance.

  Yes, I have operational requirements for this.

  Can you check my first comment. I've updated. It can help you.

  -RMishra

• single button with two expression?

  Hello
  
  How to configure 2 expressions for a Single_Button in terms of the 'Condition' of the Page Edit button.
  
  I already have an expression like:-'Expression 1 = P1_NO' and condition_type = "Value of the element in the Expression 1 is NULL", but this being specified I want to add an expression in the expression 2 how I can do?
  
  apprecaited
  
  
  In depth.

  Hello deep,

  I just created an example (form & report on a Table) and changed the State of the button [Apply Changes] to the Condition Type = PL/SQL Expression and Expression 1 is
  : P20_PRODUCT_ID IS NOT NULL AND: P20_PRODUCT_AVAIL = 'Y '.
  And that works like a charm.

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Main table with two tables of children as part of the ADF

  Hello
  
  I'm trying to implement single master with two tables in detail using oracle adf framework of Jdev 11.1.1.4.0. I am able to only master / details using the link display but unable to reach the details i.e., nested block child master with nested blocks.
  
  I created query view object based on the master and two poll objects of the base seen as details. Then, I created two master of first child link and another link for master of the second child. Even in this case in my data controls I see two different components which is incorrect.
  
  Please let me know how to create a data control for an example below:
  Fruit [MASTER]
  -Details of Fruits such as the table of the adf
  -Apples [FIRST CHILD]
  -Details of the apples as adf table
  -Orange [SECOND CHILD]
  -Details of the Oranges as adf table
  
  Kind regards
  Amar.

  You need two viewLinks
  Fruit-> apples
  Fruit-> Oranges

  Then, in the data model, you choose the entry of fruit that has:
  Fruit
  |---> Apples

  You stand on the fruit and you shuttle Oranges to be below left to right.

  If you use the HR schema by default, you will see this type of relationship for employees:
  https://blogs.Oracle.com/Shay/entry/master_with_two_details_on_the

• How to make a backup of the database with RMAN Oracle Single Instance

  People,

  Hello. I use the server of Oracle 11 GR 1 material with operating system Oracle Linux 5.10 database.

  I understand how to back up the database instance in SQL Server with Windows. But do not really understand how to back up the database instance in Oracle on Linux.
  I did it cold and hot backup for the database HRCS90 instance, but both receive the same error message.

  
  Cold backup is below:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  Mounted database.
  Open database.

  
  SQL > shutdown immediate
  The database is closed.
  The database is dismounted.
  ORACLE instance stops.

  
  RMAN > backup database;

  From backup 25 November 13
  using the control file of the target instead of recovery catalog database
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the backup command to the 25/11/2013 14:26:52
  RMAN-06171: not connected to the target database

  
  RMAN > backup HRCS90

  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, as, backup backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, basic data, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, strength, file, incremental, keep, (, maxsetsize nochecksum, noexclude, nokeep, not, proxy, pool, re-use, recovery, section, skip). ', spfile, skip readonly, setsize, tablespace, tag to validate.
  RMAN-01008: the identifier of the AfDB was: HRCS90
  RMAN-01007: line 1 column 8 file: entry standard

  
  RMAN > backup database HRCS90

  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, backupset channel, copy, controlfilecopy, backup, common, base data, data file, datafilecopy, remove, diskratio, db_recovery_file_dest, filesperset, format, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, more reuse, recovery, section, skip, spfile, pass readonly, setsize, tablespace, tag, to).
  RMAN-01008: the identifier of the AfDB was: HRCS90
  RMAN-01007: line 1 column 17 file: entry standard

  While the instance of database HRCS90 is starting, I do hot backup by using the same commands and get the same error message with above cold backup.

  My question is:

  Can any folk tell me specific steps (order by order) to back up a single instance of the database in Oracle with RMAN?

  
  Thank you.

  Yes, you can restore and recover the backup, but not at the moment. You will only be able to restore and recover at the time of your backup.

  For example.

  If you take backup (mount point with no mode of journal archive) at 06:00 and your grave database crashes at 21:00, you will be able to restore and recover until 06:00. You will find all the changes made to the database between 06:00 and 21:00.

  If you want your database to recover until 9 PM or until a point in time, then you must put your database in log mode archive, and then save the archives.

• can perform us two actions with a single button in two clicks, one after the other?

  Mr President.
  
  can perform us two actions with a single button in two clicks, one after the other?
  
  I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.
  
  Concerning
  
  Tanvir

  In the code, it should be easy.

  The following code adds that a button called butman with text 'ADD '.
  It then registers a listener that will be called if the user clicks the button.

  This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
  That's why he will swap the functionality of the button between ADD and CLEAR on each click.

  final Button butman = new Button("ADD");
  butman.setOnAction(new EventHandler() {
            @Override
            public void handle(ActionEvent t) {
                      if (butman.getText().equals("ADD")) {
                                butman.setText("CLEAR");
                                runAddData();
                      } else {
                                butman.setText("ADD");
                                runClearData();
                      } // END IF-THEN
            }});
  

  I hope that's what you wanted.

  Further reflection.
  You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

  I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

• Protect the single instance Oracle 11 g 2 with Clusterware linux No 11 GR 2 RAC

  Hi all
  
  I saw this link, but he mentions CARS as a solution:
  
  Use of Oracle Clusterware to protect a single Instance Oracle Database 11g
  
  I have seen various articles on protection one instance with cold recovery using clusterware, but they mention the scripts and the old versions of Clusterware. I'm trying to figure if possible to incorporate the virtual IP / scanning of listeners or if it is still a supported configuration...
  
  
  
  I implemented the 11 GR 2 using OCFS2 clusterware. Basically I just want cold failover from one node to another, and I don't want to buy a CAR license...
  
  Thank you very much
  
  Published by: vcovco on Sep 30, 2010 13:52

  Hi Vcovco,

  You must understand, that a VIP (host) works correctly for Oracle in conjunction with a listener to listen on the virtual IP address.
  Now, if a VIP (host) fails over to another node, the local listener won't. So even if you can ping the VIP no client can make connections. This VIP, since there is no listener listening on this VIP on the foreign host. (But the client will get a denunciation pronto to browse more through his address list).
  However, SCAN VIPs work differently, because they have an earpiece connected to them, which will also fail over to another node. This is why permits be accepted, if current running on the other node (as the listener moves with the SWEEP VIP).

  That is why in the past, you had to create a VIP 'user' and a 'user' listener, that there will be a changeover of the two (not like the Oracle of VIP welcome). A VIP SCAN done exactly that, it is not necessary for a 'user' VIP and the listener (However it still work!).

  a.) every DBA should make backups using RMAN in the meantime...
  (b) there is also a copy of asmcd command

  With regard to the advantages over OCFS2
  -best performance (almost RAW)
  -easier to extend (no need to resize)
  -no hot spots if storage is extended, because storage is automatically rebalanced.
  See here: http://www.oracle.com/technetwork/database/asm/db-tuning-guesswork-173710.pdf
  -consolidation easier
  To name a few.

  Another thing no one mentions:
  With OCFS2, you have a second clusterware running on the server. OCFS2 has its own mechanism of fencing.
  We must therefore consider some things more 'correlate' fencing OCFS2 and fencing OCW. Not that differently, they decide on what node restart.

  So my advice is: keep it simple. Use only the 1 clusterware.

  And last but not least: ASM now has a system of files ACFS

  Sebastian

• How can we do a single element with the content of two clips

  How can we do a single element with the content of two clips

  You try to get a picture of image? In other words, that contained two visible clips at the same time? If you are, change the substantive item to you main plot and another tie on top using an edit connect to the battery. Select the top item. Activate the transform tool and resize and reposition the clamp if necessary.

  Russ

• Single Instance Oracle 11.2.0.4.7 with GRID + ASM - AMT headphone attack Poison Fix?

  I'm under a single Instance Oracle 11.2.0.4.7 with GRID + ASM database on Red Hat Enterprise Linux 5.7. I'm trying to fix the infamous TNS Listener Poison attack vulnerability. I tried to implement the COST using this guide (Doc ID 1453883.1) but it doesn't seem to work as it still appears on a scan of the retina. I can't get a remote listener to register to test the vulnerability, and it does not appear in the log listener xml as a registration or denied. Don't know what I'm doing wrong.

  
  

  I added this to my listener.ora:

  SECURE_REGISTER_LISTENER_PROD = (CPI, TCP)

  The Alternative fix to the COST must turn off dynamic registration but I can do it when executing grid with the DSO with only a single instance database?

  How can I fix with my setup?

  You would implement better VNCR on 11.2.0.4:

  for CARS: 1914282.1

  the properties of a single instance: 1600630.1

• Restoration of RMAN of the CARS to single Instance on another node with dif NAME DB

  Hi all
  
  We intend to make RMAN RESTORE on the test server, taking the RMAN backup to disk of the production server.
  
  Production server configuration:
  ---------------------------------------------
  
  NAME: genprod
  CARS: 2 node RAC.
  OPERATING SYSTEM: IBM AIX 6.1
  DATABASE VERSION: 10.2.0.4
  
  
  Test server configuration:
  ---------------------------------------
  
  NAME: miguat
  CARS: 2 node RAC.
  OPERATING SYSTEM: IBM AIX 6.1
  DATABASE VERSION: 11.2.0.3
  
  How do RESTORE RMAN of the CARS to single Instance on another node with NAME DB different...
  
  My production database name was "GENPROD"... my test server database has been 'MIGUAT '.
  
  When I do the restoration, I get the following error:
  
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 06/08/2012 13:22:11
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  
  
  Please help me with this...
  
  
  Kind regards
  VAMSi...

  Hello

  You can take a look at http://taliphakanozturken.wordpress.com/2012/07/20/how-to-restore-10g-rman-backup-to-11g/

  You will need to change the name of db only after the database was opened after the upgrade and other steps.

  Anand

• 11.2 single Instance DB with ASM

  DB version: 11.2.0.2
  OS: RHEL 5
  
  I want to create a single DB with the ASM instance. I did a single software installation. In the wizard DBCA, I can't find an option to create Diskgroup through the UI, as we 10.2 DBCA. I'll have to use ASMCA for this. But I think I have to install the grid for it Infrastructure. Is there another way to create the diskgroup through the UI?

  Hello

  I want to create a single DB with the ASM instance. I did a single software installation. In the wizard DBCA, I can't find an option to create Diskgroup through the UI, as we 10.2 DBCA. I'll have to use ASMCA for this. But I think I have to install the grid for it Infrastructure. Is there another way to create the diskgroup through the UI?

  You need to install the first grid with sotware Infrastructure only option to use ASM
  That you use asmca to create asm diskgroup
  That you need to use the software to install Oracle 11 g 2 only, you can use dbca

  Respect of
  HELIOS

• I have a video with two cameras, in two pieces. Sometimes only a single camera is running (because t

  I have a video with two cameras, in two pieces. Sometimes only one camera is running (because they both turn off to some lengths of clip). I'm cutting them using the multicamera window, but I get no audio track 2. How can I get audio track 2. (My tinkering is to cut the original sound track 2 and move it to channel 1).

  «To record the audio from the camera selected for the audio track, select Audio video follows in the multiple camera monitor Panel menu.» Deselect this option to record audio from the audio track selected in the source sequence. »

  A quote from the CS5.5 Pr help page "editing multi-camera sequences.