Size of the project folder

Similar Questions

• Conditional marking, a single source and reduce the size of the project

  Hi all

  I use RoboHelp 10, and trying to find a solution to some of the problems addressed in the draft I am trying, as:

  1. The RoboHelp project that we are working on is pretty important. As a result, generating output takes a long time. WebHelp output takes more than 15 minutes at times, while the PDF output gets stuck, and in the end, we need to cancel it. We have some sections in our project, which are widely used by all authors. If we do not want to divide the project into several projects of the children and then merge again as this would mean the unequal distribution of work among the members of our team. How can we reduce the size of the project to increase the efficiency? Is this something to do with file corruption or the number of pages?
  2. We use two separate projects for CS Help and WebHelp. We also plan to label conditional content WebHelp for CS project, so that we can create the help CS and WebHelp by using single-sourcing. One solution that I think might work is to create a new table of contents using CS in the project of WebHelp and generate the output labeled. To try it out, it didn't work well. Also, can I use a different style sheet for WebHelp and CS Help? If so, any suggestions as to how I can do?

  I'd appreciate it really all the help of all the experts here.

  Thank you

  RA

  Thanks for the additional info, Rachael.

  Regarding, "exclude no referenced topics of output", something to keep in mind that several output formats will include topics that are not explicitly listed in the table of contents. If this checkbox allows to exclude topics that you have not otherwise referenced.

  However, another approach uses conditional build tags that are applied to the topic-level.

  For example, your 2,000 pages assume a large part of those who did not appear in the table of contents, but you want a handful of reference pages available through the function of Research . Follow these steps:

  1. Create a conditional build tag along the lines, "Exclude all."
  2. In the list of subjects, select all, right click and choose Properties.
  3. On the Advanced tab, check your box exclude everything ,... .tick once... and then wait for RoboHelp update (it will be a long wait for 2 000 subjects.
  4. Once you have a visual confirmation that the box is checked, click OK to close the dialog box. Still, there is a lag.
  5. In your table of contents, right-click on each chapter and use shortcut keys [y + n] to access conditional compilation tags.
  6. For each chapter, in turn, clear the exclude from all check box. There will be a slight shift by the number of topics in each chapter.
  7. In the list of topics, find the topics that, if they are not in the table of contents, you want to be compiled with the project. Clear the checkbox to exclude everything for each one.
  8. In the conditional build Expression for your project, make sure your tag exclude from all in the column exclude output .

• Why do I get a symbol of Premiere Pro CS4 in the project folder, when I save a project CC?

  When I save a project edited with first Pro CC in the project folder I get a symbol for Premiere Pro CS4 rather ot getting the CC symbol. I can't open the CC project by clicking on the symbol of CS4. Why?

  I discovered myself that you can choose in the project folder if you want to save the project in CS4 or CC. Sorry I took your time with my problem.

• You cannot use a remote location like a cache of the project folder.

  I get this message when you try to activate SCORM in my project, how can I publish?

  You cannot use a remote location like a cache of the project folder. Please enter a valid address to continue.

  Any ideas are appreciated!

  Hello

  Can you check edit > Preferences > General settings.

  and check the location of the cache folder and the project preferences.

  This location by defalt is: C:\Users\ user\Documents\Adobe put Captivate cached ongoing projects

  Please check this and respond

  Thank you.

• Change the size of the project after recording

  Is it possible to change the size of the project form after it has already been registered? I have a presentation that was recorded at 670 px of height and I'd really like to shrink down to 800 X 600 so it can fit in a browser without scrolling window.

  Thank you

  Whitney

  Hello

  Try clicking project > resize.

  Note that this will likely affect the overall quality of the project. I would like to start by clicking file > save as to keep a blank copy of the original.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Open g vi in the project folder

  If I used a few open g vi and I want to include these vi in my project folder, so that all my vi are under the same folder.  What is the best way to achieve this?  What I have to do a source distribution?

  jyang72211 wrote:

  If all screws are understand the same folder if the folder is moved to another location, it contains everything that a program was needed and no need to install anything.  I saw this fact, and I probably won't "do this, but I wonder what is the best way.

  The best way is to have OpenG installed on each machine of LabVIEW development worldwide... good well maybe a little high hopes.

  I understand the desire to have easy transport and having only one folder with all that it makes it easy for you.  But I have to recommend what others have suggested.  If you have a Bachelor of VIPM it makes it easier because you can perform a check, have it analyzed what packages use a project and roll them all into a single file.  Then when you want to move your project, you take your screws and record this file to a configuration (VIPC) and after installation the VIPC you can open your code and have it all to not be wiped out.

• Deletion of slides has not reduced the size of the project file... why?

  Hello

  I am trying to reduce the size of file in a project and abducted a number of slides.  However, when I saved the modified draft, the size of the file has been

  in fact, a little more.  Why is this?

  For example, the original file size 182 336 KB and then after the withdrawal of a certain number of slides with objects the size of the file is 182 916 KB...?

  Thank you

  Try to go to the Library tab, and then click the button that looks like a broken link (between the refresh icon and trash icon).  This will select all unused library assets.  Then, click the trash icon to delete and save the file.

• All of a sudden, the emails I am dial are a building block in the middle of the screen.  I can't minimize or move the drive to refer to another email.  Must send to the project folder.  Boring!  Why is this happening?

  Hello!  All of a sudden, the emails I am dial are a building block in the middle of the screen.  I can't minimize or move them if I need to take a break to refer to another email.  I send email partially completed to the drafts folder.  It is extremely annoying.  How to do this?  Operating system is OS X Yosemite (10.10.5) on a MacBook Pro.   Thank you!

  You are using the full screen? Try the command - command - F.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• Question about the size of the Previews folder

  Hello

  This is my first question on Lightroom, so I would really appreciate help ^^

  My setup is as follows: a LR catalog, with about 51,000 photos. The total size of the pictures takes up approximately 252 GB (they are between 10 Mpx-22MP).

  I implemented the previews as follows: auto-size (2560px), average quality, ignore the insights 1:1 after 1 day.

  Now my previews is 50 GB!

  Is this normal?

  Thank you very much for your help!

  Hello

  Yes this is normal looking at the configuration and the number of images that you have in the catalog.

  Check this similar to the forum thread.

  I hope it will be useful.

  https://forums.adobe.com/thread/786582?tstart=0.

  Thank you

• Copy the project folder mounting clip

  I synced a clip video to an audio clip that was recorded separately and linked to them.  How to save this combo?  By dragging the project file copied only the audio track.  Help please!

  You can not do exactly what you are after, but a fairly simple solution is to use a separate sequence to synchronize video and audio together, then use this sequence as if it were a video clip in the final sequence. In this way, you create no new media, you can change the source if necessary and is not any increase in a lot of time to implement this sequence.

• New to first Pro - imported .mov file is smaller than the default size of the project

  I imported a low quality .mov file that I am trying to change. It is about 380 x 160 (per here) and default is 720 xx.

  Is it possible to resize the project so that it matches my mov file?

  I don't want to export the video with a huge black screen around it.

  Thank you!

  Use the desktop for your sequence settings.

• What should a cache of the project folder?

  Hello

  I just tried to help a colleague to recover a corrupted their cache CP8 project following the instructions I found on the site of Infosemantics Rod (thank you) and also referenced on this forum.

  It did not work. But the record did not contain the content referenced in the article. See screenshots below (left section, is shot is to the right of our file). All other folders that we checked looked the same.

  

  This could be the reason that the recovery is not successful? Why don't we seem to have the necessary content in the folder? I put my Explorer options to show all hidden files, folders, etc.

  Thank you for your help in advance (hopefully, this isn't just a mistake of rookie on my part).

  Scott

  Hmm, that's how the record cached now seeks CP9 that is actually different. Which shows the stem is the way in which the file cached leaning forward. I tried yet to recover the cache, it has not so far. Have you tried to zip and rename this folder cache?

• Size of the project Max practice

  It seems that this question must have been asked and answered already, but I couldn't find anything...

  Is there a practical limit for the size of project organization, both in terms of number of clips, sequences, effects, etc. ?

  My last film effort began with about 2500 clips in DV - AVI (collectively probably more than 100 GB). I found myself with about 45 minutes of final film, spread across over 15 or if the sequences (each ranging from 1 min to 5 min long). Pretty basic effects (although almost every clip I've used gets "Fast color corrector").

  A project of this size safely could be done in a single project, or should I (as I do now) create several mini projects and combine them in one, final project "master"?

  I did have problems with similar projects.

• Mobile display reduced the size of the project

  Why my projects appear smaller on a mobile device or browser.

  Two examples showing reduced:

  http://theedge.Sun-Sentinel.com/2013/HMS/SFHMS.html (600 x 300)

  http://theedge.Sun-Sentinel.com/2013/TaxLiens/TaxLiens.html (600 x 210)

  My last project was using EdgeCommons Adaptive Layouts. It displays to the right size. (Mobile to 280 px wide)

  I guess that he integrated into his .js file that performs a media query to display the good encoding format.

  http://theedge.Sun-Sentinel.com/2013/SOP/done.html

  I'm sure someone will have a pretty good idea what direction I should go.

  The terms or keywords that I can use to search would be very useful.

  Thank you

  Cindy j..

  One you say works a special tag which tells the browser how to process a page:

  Pages that do not function properly for you both do not have this tag.

  Here is more information on the window of Mozilla: https://developer.mozilla.org/en-US/docs/Mozilla/Mobile/Viewport_meta_tag

• Can question on the size of the project - you do evolutionary?

  Hello!  I created a presentation in Captivate, which is 1024 x 768.  My colleagues say it's too big on their screens.  I know that I can export it as a size smaller, if necessary, but is there a way to make the evolutionary project?  In my past experience, I thought that the flash has been evolving, but this project seems to be a fixed size.  Thank you in advance for your help!  I'm on Cp 5.5 for Mac.

  Welcome to our community

  Sorry, but the Captivate files are not scalable. They are composed of raster images. Things more Flash are vector images, so they are scalable. But not Captivate.

  Cheers.... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks