Slide downwards is lower in the z-index

Similar Questions

• Why the 2d graphics score is much lower than the 3d

  upper graphical desktop score is significantly lower than any other partition on the windows experience index. The index is just a waste of time or is there a reason for this 1 score to be much lower

  upper graphical desktop score is significantly lower than any other partition on the windows experience index. The index is just a waste of time or is there a reason for this 1 score to be much lower

  The score is less on your computer because your video (graphics) card was obviously designed for its 3D graphics was paramount while 2D was a secondary function.  (You have a game system).

  What specific video card do you have?

• where to find info on the function index according to

  Hello
  
  With the help of Oracle 11.2, can someone tell me where I can find information about existing indexes to function in my database?
  
  I want to shrink the unused space on a table, but there is an index FB I have to drop in order to shrink the space.
  Then I need to recreate it after that I have shrink space.
  But how do I know what the index is created to be used for functions?
  
  I've looked dba_indexes and dba_ind_expressions with no luck.
  I see the index, but I don't see what functions are which are applied for the FB index.
  
  
  Thanks in advance.

  958713 wrote:

  select OWNER, INDEX_NAME, INDEX_TYPE, TABLE_OWNER, TABLE_NAME
  from dba_indexes where index_name = 'TQR1_C3';
  
  OWNER      INDEX_NAME INDEX_TYPE                  TABLE_OWNER  TABLE_NAME
  ---------- ---------- --------------------------- ------------ ----------
  TQ         TQR1_C3    FUNCTION-BASED NORMAL       TQ           TQR1
  

  Now, let's view the selection of dba_ind_expressions...

  INDEX_OWNER  INDEX_NAME TABLE_OWNER  TABLE_NAME COLUMN_EXPRESSI COLUMN_POSITION
  ------------ ---------- ------------ ---------- --------------- ---------------
  TQ           TQR1_C3    TQ           TQR1       "C3"                          1
  

  If you have a top-down column in an index the index is reported "based on a normal function", but the expression simply contains the name of the column without mentioning the bit downward. So one possibility is that your index finger is (descendant of c3).

  Concerning
  Jonathan Lewis

• Does anyone else have a problem with the left speaker is much lower than the right?

  Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?

  Hello, TopDog16!

  Welcome to congratulations on getting a new iPhone and Apple support communities 7.  From what I see in your post, you have any questions on the stereo speakers in your new iPhone.  I would be happy to help you with that!

  Indeed, your iPhone has holes on both right and left sides on the lower edge (on each side of the connector of the Lightning).  The holes on the right are only speaker on this edge of the phone, however.  The other speaker in the pair is at the top of the phone, where the cut is, just above the screen.  Check here to see if sound comes out.

  This page has a large diagram of the iPhone of 7 speakers (in the section entitled "Buttons and external connectors"): iPhone 7 - technical specifications

  Have a great rest of your week!

• I'm not able to open my documents pages. I get the message: the requested index.xml file is missing.  I wonder if it is because I have updates 10.11.5

  I have an iMac (20-inch, mid 2007) processor 2 GHz Intel Core 2 Duo 3 GB 667 MHz DDR2 SDRAM memory and recently updated to el capitan 10.11.5.  I have Pages ' 09, and I can't open my documents pages and get the message:

  The index.xml file required is missing.

  I now see that it says return to default pages 5.6.2.

  I can open them as 5.6.2 then save tehm in pages ' 09?

  Can someone help me with easy tips?

  Only the Pages ' 09 or old documents contain internal index.xml file. When you try to open a document in Pages ' 09 Pages v5, you get this dialog on the missing index.xml. The key is to stop Pages ' 09 and then double click on the document to open it in v5.6.2 Pages.

  Pages ' 09 will not leave by simply clicking on the red light on the title bar of the document. As long as the Pages ' 09 continues to run, it will intercept all attempts to open any document Pages, including incompatible versions of the v5 Pages.

  This has nothing to do with OS X 10.11.5. He has been a user focused on the issue since October 2013.

• What are the files index.html in images under Developer?

  What are the files index.html in images under Developer? I am backing up my computer and 712 files index.html. What do these? They are in my pictures folder and when I try to open them, need me online and looks like this...

  Events

  Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 | Page 11 | Page 12 | Page 13 | Page 14 | Page 15 | Page 16 | Page 17 | Page 18 | Page 19 | Page 20 | Page 21 | Page 22 | Page 23 | Page 24 | Page 25 | Page 26 | Page 27 | Page 28 | Page 29 | Page 30 . Page 31 | Page 32 | Page 33 | Page 34 | Page 35 | Page 36 | Page 37|

  Page 38 | Page 39 | Page 40 | Page 41| Page 42 | Page 43 | Page 45 | Page 46 | Page 47 | Page 48 | Page 49 | Page 50 | Page 51 | Page 52 | Page 53 | Page 54 | Page 55 | Page 56 Page 57 Page 58 | Page 59 | Page 60 | Page 61 | Page 62 | Page 63 | Page 64 | Page 65 | Page 66 | Page 67 . Page 68 | Page 69 | Page 70 | Page 71 | Page 72 | Page 73 | Page 74 | Page 75 . Page 76

  What are these files? I didn't remove them because I didn't know if I needed. They accompany the my photos?

  I bet he wasn't "online you" it has just shown the local HTML file. Looks like you ran software that created a slideshow of your images HTML, and these index files have been the result.

• I can't stop slide show of Photos showing the file name at the beginning?

  I made a slideshow for a crowdfunding charity event, but the Organizer is hampered by the fact that the file name displayed in large characters, hiding part of the actual text, when the slideshow begins to play. I can't find anything in the controls or insufficient preferences to stop what is happening, someone at - it ideas? I admit it is a bit ridiculous.

  Thank you!

  Kit.

  Using Photos or iPhoto to run your slide show?  Only the project title appears automatically on the first slide and does not display the names of files.  The user needs to add additional text/filename to each slide with Photosl

  If you use iPhoto then click the gear pinion and check the Show Legend checkbox is unchecked in the slideshow settings window:

  

  

• Dialog box States: the document is not valid. The xml index file is missing. What should I do?

  Tried to open a file of numbers. Dialog box shows: the invalid document___is. The xml index file is missing. I can retrieve this file? Suggestions?

  Yes, all you have to do is probably make sure you run the version of numbers which is located in your main Applications folder and open the document with this version.  Probably, you try to open it with the old version of numbers.

  SG

• I am trying to open a file and make me notice that the required index.xml file is missing. Is it possible to access the file? I don't know why this happened.

  I am trying to open a file in Pages 09 and am getting notice has the required index.xml file is missing. Is it possible for me to access the file? I don't know why this happened.

  You open a file with Pages ' 09 Pages 5.x.

  You need to right-click on the file and open it with Pages 5.x (the one with the orange document icon).

  Peter

• Get the maximum index of a vector of growth

  Hello

  I'm having a very strange problem. I simulate data with an sine function in a while loop and I keep the values< 0.7="" into="" a="" vector.="" when="" the="" sinus="" values="" are="" over="" 0.7,="" i="" remove="" the="" vector.="">

  I would like to get the maximum index of the vector at each iteration of the loop. However, I get a zero index while the vector has a size > 0.

  It's really strange, because if I put the values of the iteration instead of the values of the sine, the index created is correct (the only difference is that the iteration number is an integer, while the sine is a decimal number).

  To make someone understand something?

  Thanks for your help

  Andrew

  Instead of "delete table", just leave the REAL empty case and 'use default if unwired' on the output of the table tunnel.

  Once the sinuses is once again<0.7, you="" are="" on="" the="" descending="" branch,="" so="" the="" first="" element="" is="" always="" the="" largest="" for="" a="" while.="" nothing="" wrong="" with="">

  I would also put indicators after the case structure so they update in all conditions.

  Table min & Max will give you the index of the element with the highest value. If you want to know the size of the array, use the function "size of array".

• Find the exact index of maximum PNo() local and ChnFind() seem to be problematic

  Good day to all experts DIAdem!

  I am after some help and wonder if what I intend to do is possible, as much as tiara fucntions are concerned.

  I have a few cyclical data (continuous acquired as a set of data), which I am able to identify individual events. Within each of these events, I use the StatBlockCalc, so calculate the minimum and maximum local power (in the range of the specified index). I would then use the calculated maximum, a specific channel, then 'read' effective competition on other channels.

  I tried to use the ChnFind and PNo and both give results that often fall beyond the top and bottom of the index for this event. I believe that this is due to the fact that these search functions for a nearest value of the value in question and NOT the exact value for (rounding errors may also play a role). Please note this is not a criticism of the functions, because I believe that what I am asking is perhaps more by the high-performance computing (as opposed to hunting for the nearest value).

  So my question is - this feasible? To calculate a local maximum, and then use this value index reading on the remaining channels (to determine the values to the maximum).

  I hope that what I am asking is clear, if not so, feel free to ask away.

  Kind regards

  Dan

  Hi Dan,.

  If you want to attack this from the rounded side error, then I suggest to insert the ValEqual() function in your search expression - it has been designed to avoid rounding problems you seem like you're running.  My other recommendataion would be to abandon PNo() and use instead of ChnFind() with the known since your window index the starting index.  This action runs more quickly and find the extremum of right.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• initialize the array index

  Hello!

  I'm new to LabView and I am struggling with this problem for a few days...

  I have a 2D x CH spike_time table and on each line (table 1 d), I need to implement logic that requires the ability to dynamically initialize the two indexes.

  To be more clear, if I says each line of the table 2D with CH, it is the logic I should apply on each line:

  i = 0;

  while I<=>

  {j = i + 1;

  While ch (j) AND (i) - ch (j) ch<= inter_spke_interval="" and="" j=""><=>

  {j = j + 1 ;}

  If j - i + 1 > = min_burst_size then save (i, j);
  I have = j;

  }

  What is the best way to apply this logic in labview?

  How can I manipulate the value of the indxes, i and j to initialize as in the code? I tried to use the "Subset of the table" function in order to 'cut' subset of the line from i and j and records the SHIFT to pass again the subset as the loop, but I couldn't a solution anywhere nearby.

  If someone could share some ideas with me or has a similar vi useful, I would be very grateful!

  Thank you very much!

  Hi MG,.

  I already said you can use SHIFT registers to store I and j!

• Can I use a digital control to change the illustrated index of an array?

  Hey people,

  This could be one of these questions, get feedback 'why would you do?', but I wonder if there is a fairly simple solution, I don't know everything...

  I know that tables are not exactly gems when it comes to claims for benefits, but with my particular application, if I could get a digital control to define what the array index appears, it would be great.  In addition, assuming that it is possible, then I think I could find a way to have two Boolean values which would increment/decrement the element indicated by updating the digital too...

  Any ideas?

  A popular entry!

  THX

  Is that what you wanted to achieve

  

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

• Get the current index value of the table control

  I have a table control 1 d on a panel that contains a value of temperature curve that I send to a temperature controller. The values in the table are not unique, because for example 40.5 degrees in the table could represent 40.5 degrees on the cycles of cooling or heating. I could have severat heating/cooling cycles programmed into the table. I would like a way to read the array index of the currently displayed item in the array in the up/down control of index on the left of the table control. I could then run curves partial temperature easily by neutrophilia a starting point on the curve in the table control.

  I don't see a property that I can use to get this index value. Anyone have any ideas?

  Thank you

  J

  Use the property 'index values. It will be the first item of the output of a 1-d array.