Slide show empty in LT 6.5.1

Similar Questions

• Slide show does not (is empty)

  Created a simple slideshow with about 8 images and it works fine in the preview and also dreamweaver but when uploaded the slideshow does not at all just two buttons left and right?

  I'll add 'publish' site for a temp Adobe BC with Muse and then test the slide show... This helps eveyone see question and is free. easy to do.

• When my computer is idle, all my images appear in a slide show. How can I disable this?

  MY SCREEN SAVER DOES NOT WORK... WHEN THE COMPUTER IS IDLE, ALL MY PHOTOS ARE IN SLIDE SHOW MODE. IT STOPS WHEN I press THE SPACE BAR. How DO I TROUBLE this PROB?

  original title: MY SCREENSAVER IS NOT WORKING... HOW SHOULD I DO?

  Assuming that you have a version of Windows XP, right-click on an empty space on the desktop and select Properties.  Then click on the tab "Screensaver".  In the drop-down list box, select something other than "My pictures slideshow."  OK your way out.

• Slide show from a USB?

  It seems that the only way to use the slide show for pictures is to make them in the pictures folder.  What happens if my pix is on a USB?  I am happy to copy them in a sort of temp file?

  Suppose I want to start a slide show on the 5th photo.  How do I do that?

  You can navigate to the folder that contains the picture you want for your slide show. Right-click on an empty area of the desktop and select personalize. In the personalization window, click wallpaper near low center.

  
  Figure 1.0 - search for a slideshow

  With your USB stick in the USB, click Browse (noted with a red box above) and navigate to the folder of your USB key image. I do recommend not quite using a USB key as a transitional source for something like a slide show of office because of its intrinsic nature.

  I do not believe, you can ask a slideshow start somewhere in the middle of an image list, but you can add or remove the photo hovering over them and checking / unchecking the small box at the top left of the thumbnail of the photo (noted with a red box above). However, you can rename images based on your preference for an ordered list.

  • "Have you tried it turned off then on again? '-'The IT Crowd' Roy (Emmy award-winning British comedy)

• Wallpaper slide show

  I've set up a wallpaper slide show of my own photos.  Recently, some images have begun wholesale plan instead of the full view as before.

  How can I get them back to normal.  They are fine in the case.

  Hello

  Please contact Microsoft Community.

  The description of the question, I understand that the wallpapers set by you do not appear in full view.

  Be assured that we are here to help with your concern.

  You experience this problem due to an incorrect wallpaper settings

  I suggest you follow the method to see if it helps below.

  1. Right click on a space empty on the Office.
  2. Select the Customize option in the drop-down list.
  3. Select the wallpaper option.
  4. From the location of the image , option browse your directory by clicking the Browse option.
  5. Click on select all.
  6. Under the position of the image option, select fill .
  7. Click on save changes.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Slide show of drag... Shot at the beginning of the slide show

  Hello

  I have a slideshow that I can drag... I would like to know if there is a way to make the slideshow to go back to the first image if I continue to swipe.

  A loop is performed automatically if you enter it... and let play by himself...

  but when I drag it... It stops at the last image.

  Any ideas anyone.

  Thank you.

  Hey, look,

  If you are using slideshow widget that is inside the widget Muse, it works perfectly as per your requirement.

  I tried to create a new (empty) slide show and its job very well, also let us know what device you check the preview.

  Please open this link of test ( click here for the link test ) in the same device.

  Please let us know if it works.

  Thank you

  Prabhakar Kumar

• How to change a slide show from a DVD in first 14

  I made a slide show dvd in first 4, on the old computer, I want to now edit a photo off that says dvd slideshow, but I now have a new computer with 14 Prime Minister. When I choose ' get media' "I choose"DVD player camera or a computer"the video importer opens with the STM to the slide show dvd. BUT when I click on 'Get media', for a bout 1 second, it says get Error Message file copy Media, then I already exists at: C:\user\Owner\Videos/ I click OK.    Then when I look in the files and folders, C:\user\owner\videos\, the only thing I see, is that a folder called "Capture" which is empty.      There before 14 first allow me to get something in my editing.  Is there a problem with the Prime Minister 14.  Help, please.  I had a lot of success with the premier 4 & photoshop 6 in the past, but 14 seems so hard. Thanks in advance. Pat

  Pat

  I really know what you are describing, been there and found that with first elements 14/14.1 Windows.

  1 disc in the burner tray

  2 Premiere Elements open 14 experts workspace.

  3 DVD camera or computer in the selected drive

  4 importing video, VTS_01_1.VOB selected, press on get the media

  5 and an Expert, workspace has been affected by what follows that the destination be videos or Desktop.

  And the file did not already exist in one of these places.

  

  Solution for me... Close Premiere Elements. Remove the Adobe Premiere elements Prefs file

  Local disk C

  Users

  Owner

  The app data

  Roaming

  Adobe

  First Elements

  14.0

  and in the 14.0 folder, is the file Adobe Premiere elements Prefs that you delete. It is important to work with folder Option show hidden files, folders and disks enabled so that you can see the given full path.

  Reopen the Elements first, then try to use the camera or computer importing video and DVD player.

  Please let us know if it works for you as it did for me. If the worst came to the worst and you are a lack of time, then we might consider

  a. open the disc in the tray of the burner

  b. the VTS_01_1.VOB copy on the desktop

  c. import that file in Premiere Elements with elements Expert first workspace add active media/files and folders/projects

  I'd rather not have to do this, but...

  RTA

• Images imported into slide show have different resolutions (was: slideshow)

  I have all my images of target set to 500px high (but some are bigger than others).  When I import them into my slide show, some of them show to 500px, but some of them show smaller.  Why?

  Try to use the Virgin slideshow widget and enable Lightbox in its Panel.

  For some strange reason, the lightbox widget tends to scale images. (I tested and got the same results as your examples, did not using the empty widget however). You can double-click the images and intensify, because it shows you the percentage, but it would be too much hassle.

• Slide shows and text

  I'm trying to find a way to add text to a slide show full-screen that changes with the slide and don't stay fixed on each slide?

  Widgets to plain vanilla slideshows restrict opportunities for certain rules: there is always an icon and a container of large image and the auxiliary chosen as for the other elements and next buttons and text (one), still walk. However, the category of Composition widgets gives you a lot more freedom. Instead of an small icon pre-setting and enlarge, they come with more flexible 'trigger' and vacuum containers 'target'. If you decide for yourself what to put where in a relaxation area and what to put where in the target area. You can imitate even a simple slide show, but more complex variations range from the row of typical ball slideshows (keep triggers small, empty, colored and rounded) to pop - ups scattered (start with the ToolTip composition of the screening and then drag all the stuff around on top for example a normal image under the widget). This freedom requires more effort, to build exactly what you want for each slide. So less automation, but more do-it-yourself. Of course you can copy and paste content from one slide to another and replace or edit the images and other objects in the relaxation and the target.

  I hope this helps

• Embedded in the way of slide show video

  Hello!
  I have three slideshows under eachother and under those three empty a built-in Youtube

  When NWB slideshows upward in their small window of the embedded video is reproduced above the slideshow itself, obscuring the view.
  I tried to get that video back and slide show in the front, but the problem is still there. The rest of the page fades when the slideshow starts, with the exception of the video.

  What can I do to make the video melted behind the slideshow as well, or at least get the slideshow to lay on top of the video, faded or not.

  If not, how can I do the slidehsow open at the top of the page instead of the middle of the screen according to the OE far I scrolled down?

  Thank you

  Max

  Lightbox with any other content should work as expected when slideshow will bring the effect for all other content on the page.

  Please give the link to the page where you see this behavior.

  Thank you

  Sanjit

• Hover over the images in a slide show

  I am doing a slideshow of images before and after for a customer.

  Rather than having just all one after the other, I want all the images after to display as usual and the front to display the overview of each slide.

  I can do this job in a basic slide show when, rather than add a picture to the area of the Image of heroes, I use the fill and the States.

  However it only allows me to make one, that I can not add any more empty hero Image boxes (or I don't know how to do, is it possible?)

  When I add a picture from the slide show menu, it appears on top of the fills, and I can't give pictures added in this way a roll on the State.

  Can someone tell me how to add either extra blanks to hero Image, or how to apply the effect, I want to the images in the areas of the Image of heroes.

  Thanks in advance, if there is no additional info I can provide my problem, please let me know!

  M

  Hello

  You cannot add several boxes of hero image in the slideshow even. Now you can use different slideshows for your different images but usually you give the effect of the slide show but you'll be able to see all your images at once and then after if you flipping them you would be able to see the images before.

  Now, in order to create the effect you want, what I suggest is to use "Composition something". In the widget of composition, you can the triggers as small thumbnails for your images in the target, you can set the fill as your image after and in the rollover state you can use the image before. After that, you can use the feature of AutoPlay available in the widget of composition, and you will get the desired result.

  Hope this helps

  Kind regards

  Rohit Nair

• How to save the text on the base of slide show pages?

  I still run into problems with this updated version of Muse (Muse 2014 1.1).  I'm getting my Gallery page using a basic slide show to show 15 tables. Whenever I finish a page (not together edited box unchecked) and add the different descriptions and relevant details for each painting, click on file > save the site. But when I discovered in the browser of the last text on the page is repeated on every page...  Empty States Panel to lost sites, I wonder about the switching of DW.  Muse seems so little reliable everytime I open the program.

  Hello

  Also could you please provide me with the link to the page so that I can look at the issue, please share the screenshots of slide show and how you have defined the text? A short video related to the issue in front of you would be a great help.

  Forward to your response.

• 1st image blank slide show?

  
  Hi people,

  Hoping for help please...  Using the slideshow full screen but the 1st image always appears empty... it's driving me crazy!  Any ideas?

  I have used before on another website and works very well.

  For this project, I create a full screen slide show... the standard images 3 flower appear, I click Preview and it autoscrolls through images of the 3.  Fine, just need to change it to my own images.  I click on the image to full screen to get the radio button at the top right (blue circle) and click on the folder icon to add and image.  I choose 1 picture from my computer and it gets rid of flowers, then watch my image.  Large.  I add a second image and in the preview, only the second image appears.  the first is just a white screen.  I add a 3rd picture... same thing... 2nd work two, 1 blank.  OK, maybe an image... problem I put the second image as the new image of Hero (1st to display).  Now, this new image of hero is empty.  The image that was in the first position, is now in second place and now appears in the second position.  So the picture that appears, it's now the new image of hero, is no longer present.  What is happening.

  In summary - the first image of hero is always empty?  It doesn't matter how many images you add, or that we're in the image of heroes, the image of hero never displays.  I deleted the slide show, created a new... boom, same problem.  When using the flower stock images, they work very well.  When you use your own, those of the second position on poster.

  Any ideas how to fix?

  Thank you!

  Ray

  Hello

  Could you please send your file muse at [email protected]?

  Kind regards

  Neha

• Slide Show does not show the #1 slide, start on #2

  After months of work, we finally got the desktop version of this fenced site. Now, we are copying the entire site to phone format, which means hours and hours of resize each part of the site.

  The home page is a slideshow simple 'Hero', with the type and links on each slide. It works great, that is, until it is moved to the site of phone.

  He began, instead of starting the slide show on slide 1, slide TWO.  :-(

  The only clue that we have as to what is apparently wrong are the triggers of Muse.

  What triggers are similar to Muse on the desktop version is:

  

  ... and this is what they look like in Muse on the version of the phone. Notice the sign "+" is now appear after the FIRST slide instead of the LAST slide.

  

  We transferred slideshows from desktop to the phone and tablet before and used exactly the same versions. If (1) WHY now, the sign '+' appears on the FIRST slide, instead the LAST of them, and (2) HOW to move to the last slide, the FIRST slide appears when the page is presented in preview or published?

  Thanks for ANY idea.

  Nevermind, it is fixed. But seriously, what HASSLE.

  The procedure we used to reorder the slides has been:

  1. move the first slide (which was now LAST) in the last position (moving the trigger)

  2. make a new slide empty by clicking the sign «+»

  3. go to the far left slide by selecting its trigger, select everything manually (piece by piece), cut all of the selected items, and then go to the last slide and glue in position.

  4. return to the first slide (now empty) and remove its trigger, which removes this slide.

  -Repeat until all the slides except the REAL everything first glide are moved - now the sign '+' is after the last slide in Muse, which is where it SHOULD be, and now the FIRST slide appears FIRST, as it should.

  Ugh.

  Still, I would like to know why this happened in the first place, since we have started with the first slide and resized elements successively, one slide at a time, in order. We have never rearranged no slides when we their copied as the composition of the version of office to the version of the phone, and we have resized each of them in order, from first to last.

  ???

• 5.2 Lightroom slide show "Export Video" more exposed

  Hello, using Lightroom Slideshow (current version) 5.2, I can export PDF and Jpeg slide show versions that seem good.  When I add music and video export slide show exposure increases of 1.5 to 2.  Help!

  I went to 'Preferences', 'Presets', 'store presets with this catalogue"(checked)

  Thank you

  Mike84

  Video on SMugMug seems fine on my Windows 7 system using IE9 and FireFox 24, so it appears there is nothing wrong with the video of LR. Check the control panel of your graphics card. I use a Nvidia graphics card - just right-click on an empty area of the desktop and select Control Panel Nvidia configuration, or what Panel graphics card you have.

  Try to set the section "Video" from your panel back to "Restore default settings", or do it manually. In addition, there are a known issue with the Nvidia drivers causing black levels to the washed out look. If you are using a Nvidia card follow the parameters shown in the screenshot below and set the 'Dynamic Range' to 'Full (0-255)' and NOT "Limited (16-235)." Make sure that the video Panel section Conrol Gamma and color settings are at their default settings.

  If still the problem download the latest driver from the site Web of Nvidia or AMD, and install it. If still having the issue provide your OS version, model of graphics card and the version of the graphics driver.

  Click on the image to see full size