Slow down audio files of the word. Best Audio Editor for...

Similar Questions

• In an Audio file... How can I slow down a section of the floor?

  In a file Audio how can I slow down a section of the floor?

  View waveform editing simply select the part of the audio waveform you want to slow down and go to effects/time and Pitch/Stretch and Pitch and use this effect to slow down the audio.

• Render slows down mid-way through the process

  I send a project to SOUL CC 2015 or in the render queue, regardless of the format used, start quickly during the first part of the record and then, SLOW slow slow.  Why this happens in general.

  Here are the facts, you need:

  CC Adobe everything.

  News of the computer:

  OS: Windows 7 Pro fully updated

  Processor: Intel i7 CPU X 990

  RAM: 24.0 GB

  This only happens when using effects which are slow in a first time as Grain reduced by using 6 passes with unsharp mask.

  Looking at the CPU load, it is usually very small and does not load upward when rendering slows down.  If anything, the load also reduces CPU when rendering slows.

  (24GO RAM) memory usage is low, at about 29 to 31%.

  The file EXPORT to make little or no difference.

  If I exported only with light effects such as color, levels, hue, exporting is very very fast, CPU load is maxed out and memory is a bit more and export is done very quickly.

  
  

  So the problem is since the heavy effects processor is a little obvious, but wouldn't get just max out the processor? and this is not the case.  Why

  And Yes, most importantly, can do something to speed up this on my current system.

  
  

  I am a wedding videographer and try not to use the lights because according to me, it destroyed the State of mind that the family paid a lot of money for.  This sometimes causes the camera to compensate for, and from there gain depending on how little light levels, things get a little grainy.  (Yes if it is very dark, I use light and limit my consumption as much as possible.  So, using removal of Grain (AE) and other noise reduction video, it takes sometimes and works very well if used properly.  BUT sometimes it takes so long to render that I use as a last resort.

  
  

  Thanks for all your help in advance.
  

  This is perfectly normal. Many of the effects of EI are single-threaded, and contrary to your assumption simply will not make your CPU glow to make up for it. Especially with the time as effects remove Grain, raising several images and their treatment will be also implemented additional fresh General IO and whatnot that outweighs the real picture processing time. It could take hours to explain how AE handles this and what combinations cause behaviors, but suffice it to say that for now, you will have to live with it...

  Mylenium

• After downloading my file from the word document is mostly gibberish.  Why? the service used exportPDF

  After downloading my file from the word document is mostly gibberish.  Why? The service used "exportPDF.

  Hi shelbyrn,

  The quality of conversion is really depends on the quality of the original PDF file. Please see Will Adobe ExportPDF convert text and shape... | Adobe Community.  Do you know what who or how the PDF was created?

  You can have better luck by disabling OCR as described in this paper: How to disable the optical character recognition (O... |) Adobe Community. (Note, however, this is option is is not optimal if the PDF file is created from a scanned document, you wish to OCR enabled to convert the text from the image in the PDF file to editable text).

  Best,

  Sara

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  You must set the source patch:

  

• I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  A scanned document is an image; You can't find a picture.

  If the image contains text, recognition of characters (OCR) will convert the 'text' in the image in real text (searchable, editable).

  OCR can be performed automatically when converting a PDF to Word, using the ExportPDF service.

  To run OCR inline in a PDF document, you will need Acrobat.

• Analysis of XML file with the word & quot; Infinity & quot; in it

  I'm having a problem in Flex that parses an XML file, one of the names in the text file contains the word "infinite". Unfortunately, it is a constant in Flex and the element of my table don't think it's a text string but a value. I tried the definition of the xml element type and by putting the characters exhaust around the text, but nothing does. If I change the text of tiny "infinite", it works fine.
  Any help much appreciated.

  This looks like a bug. You can drop, with an example of the size of the code which illustrates, here:

  http://bugs.Adobe.com/JIRA

  Thank you!
  Matt Horn
  Flex docs

• Sound plays back faster look like "Chipmunks" of the 1960s. How can I slow down audio?

  I found out on Facebook that video that I took did not come through a longer with audio playing properly, but instead all audio is accelerated.  I tried online radio and other audio sites with all the sound speed.  How can I fix this.

  Hi Beverlybelle,

  Welcome to the Microsoft community. According to the description of the sound problem faster reads on Facebook.

  ·         Did you do changes on the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         The problem occurs with all online sites?

  I'll help you with this problem. I suggest you follow the steps in the article.

  Tips for solving common audio problems

  You can also read these articles for more information:

  No sound in Windows

  Sound cards: frequently asked questions

  I hope this helps. Let us know if you need help with windows.

• All programs crash or slow down 2 minutes after the start.

  My computer works fine for a few minutes. After that everything started crashing or slowing down. The computer is pretty useless. I tried disk cleanup, I close all unnecessary processes, I installed Kaspersky security too.after I close all there are about 58% free.my C drive is 19.5 and 2.95 GB of physical memory is free in that. Here is my card

  OS: Windows Vista Home Basic (2006 edition)

  Processor: Intel (R) Core (TM) Duo Cpu [email protected]

  RAM: 2 550 MB

  System type: 32-bit operating system

  For advanced users,

  Here is the link to my information system:https://drive.google.com/file/d/0B57Wl4BRLLWcUzZlbVJpU2d6U28/edit?usp=sharing

  I downloaded my files on google reader

  Help, please

  Thank you

  If you bought new when Vista is out and it's a brand name computer (Dell, HP, etc.), are you on your C: partition is only 19.5GBs?

  You have the Vista installation, years of updates and Service Packs, your data and your installed programs, etc.

  ______________________________________

  And when you installed Kaspersky?

  ______________________________________

  To keep a computer, these are the normal steps, I would advise you to take.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  See you soon...

• Transfer files from the laptop Win 8.1 for win 7 laptop using the crossover cable

  I am struggling with this all day and I don't have a lot of hair left.

  I am trying to transfer files as described in the issue based on this info: http://windows.microsoft.com/en-us/windows/connect-two-computers-crossover-cable#1TC=windows-7

  8.1 win machine showing networks:

  HOME-B2BD - 2.4 - (private network) (my internet connection)

  Type of access: Internet

  Homegroup: joined

  Connections: Wi - Fi (HOME-B2BD - 2.4)

  Unidentified network - (Public network)

  Type of access: no internet access

  Connections: Ethernet

  : Connection to the local network

  Win 7 Machine showing networks:

  HOME-B2BD - 2.4 - (private network)

  Type of access: Internet

  Homegroup: joined

  Connection: Wireless network connection (HOUSE-B2BD - 2.4)

  Unidentified network - (Public network)

  Type of access: no internet access

  Connections: Connection to the Local network

  I put the static IP as described (192.168.0.1 and 192.168.0.2) and same IP of the DNS server on both machines.

  I somehow got it to work before transferring them to about 10 MB/s (- what its about right?) but have no idea how I did it.

  I now have enough and pleads for help from the experts here.

  I spent a lot of time trying to make it and hope that someone can help me.

  Thanks in advance

  Mike

  Michael,

  1 I've done this work using IP and DNS Server IP entries different from those that you tried.  Set the default gateway and preferred DNS server on the IP address of the network card in the other PC.

  For example: -.

  On the PC with the LAN card 192.168.137.1 IP address, assign to the 192.168.137.2 default gateway and preferred DNS server .

  On the PC with the LAN card 192.168.137.2 IP address, assign to the 192.168.137.1 default gateway and preferred DNS server .

  2. you must also have a common Admin user name on both machines.  I added that common at the time and used the same password for each of them as well , but I can't now find notes explaining why I used the same password.  Should not be signed as a common user, you just need to use the credentials for this user when challenged at the first opportunity to connect to the PC.

  3. If you want to start over again and check everything again, I discovered that the procedure to a procedure step by step for the creation of a network of Ethernet cable of two computers between Windows 7 and Windows XP with ICS works for a LAN between Win7-WinXP, Win7-Win10, WinXP-Win10.  It seems likely that it works between Win7-Win8.

  4 a crossover between the LAN cable is not necessary.  A standard LAN cable will also work.  The standard LAN cable connection is, apparently, a little slower than a cable connection, but I was never able to see a difference.

• Slow down audio

  A file audio put wav implemented within a file flash needed a slight edit (in the middle) so I changed in his editor and updated the file in Flash - the folder remained at 44 kHz Mono 16 bit. When I update the file in Flash, it plays more slowly than the original. I decided to go to the original and the old one plays on the same slower pace - even when I remove and re-import. Help, please!

  It turns out that the "original" that were sent with the project had not been converted into 44 k. In flash, I've updated the file, he always showed 44 files in Flash animation properties, but in reaity, is at 48. When I converted the files to 44 k and re-updated-everything was fine.

• FSX aircraft try to download files through the Word.

  I have Flight Simulator x and when I try to download the files they download in Word.

  Hi fred1834,

   

  o file which you try download?

  o operating system that is installed on the computer?

  See if the suggestions below help you.

  1. take a look in the FSX directory. By default, Microsoft Flight Simulator X is installed in C: > Program files > Microsoft Games > Microsoft Flight Simulator X.

  2. create a new folder and name it, for example, of the aircraft. You can use this folder to store aircraft for example custom objects.

  3. go to the folder C: > Documents and settings > username > Application Data > Microsoft > FSX directory. Open and edit the FSX.cfg file.
  In the "Main" section near the top of the file, look for a few lines at the beginning of the script with:

  SimObjectPaths.X = xxxxxx

  Copy the last one of these lines and paste it on a new line of text. Then, increment the value of X for the next higher number. Remember to change the path of this new line after the "Plane" number (or any name that you used for your new folder in step 2). Examples: SimObjectPaths.14 = Aircraft / SimObjectPaths.227 = (your new folder name). Save the FSX.cfg file.

  4. Subsequently, download airplanes and other objects of animation in the folder that you created in steps 2 and 3.

  Your new device should appear in the selection menu when you start FSX after this tutorial.

  See also this article by using the configuration of third-party add-ins.

  Configuration of Flight Simulator X: download third-party add-on features, as the landscape, had, missions and cards

  For additional items, see:

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  For more help, please post your concerns at the forum below.

  http://forums.gamesforwindows.com/

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer slows down, defragment and clean the registry several times

  With minimal, computer surfing (with Prof'l.) XP) becomes very slow. After registry cleaning and Defrag, computer resumes normal speed. What the source of the problem and the solution? Thanx.

  With minimal, computer surfing (with Prof'l.) XP) becomes very slow. After registry cleaning and Defrag, computer resumes normal speed. What the source of the problem and the solution? Thanx.

  Never use Registry cleaners... they can damage your system if you're not careful or don't know what you're doing!

  using the analysis

  http://www.Malwarebytes.org/ (recommended)

  If you have anti antivirus program update it and run full scan or if you do not get this one:
  AVG Free http://www.avg.com/gb-en/download-free-anti-virus

  Do using the analysis:

  http://www.emsisoft.com/en/software/EEK/ recommended

  You can run it from memory stick too.

  It is recommended to perform all analysis in safe mode.

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

  Use http://www.javacoolsoftware.com/spywareblaster.html to protect your pc against spyware, adware etc and keep it uptodate then use firefox as your browser

  only use the block announcement more, no script and WOT for safer web browsing for firefox.

  Check your drive for errors

  Try to find which program is the cause of your pc slow boot

  Statement from here

  http://support.Microsoft.com/kb/310353

  Test your windows files

  http://www.bleepingcomputer.com/forums/topic43051.html

  Uninstall programs you do not use!

  Please visit my blog for more tips and tricks
  http://safewordwidewebsurfing.blogspot.co.UK/

• Wired connection slows down when plugged into the laptop

  Hello

  I have a wired connection to my laptop and you have a problem a week that my internet is slow. So I called my ISP and told them on this subject. My ISP says my connection is under FUP (Fair Use Policy - down internet speed when you reach the maximum bandwidth provided by your ISP in the months. - ONLY in the PHILIPPINES that is really annoying and disturbing) anyway, so I tried to stop using my wired connection to date and use the Wi - Fi connection. It went well, I have a fast connection again. And then I tried to connect again to a wired connection that is different from my own wired connection, it is connected to a PC and have a good connection speed. So I connect it to my laptop and expect that it has good connection to check if there are updates in my system. Surprisingly, the internet connection on my laptop was really very slow. I tried to check internet speed using Speedtest and 0.17 to 0.20 Mbps operation. So I removed again and again on the PC. When I checked the speed of connection on the PC, it gives me more than 3 Mbps.

  That's what I've done so far:

  Update drivers / windows

  Active mac address / changed

  Frushed DNS

  and finally tried to reformat and it seems not working do not and have the same problem.

  I have LENOVO IdeaPad S400 Touch with Windows 8 on it.

  What seems to be the problem?

  Thank you!

  Hi Raymel,

  Yes, it's maybe a problem with the network card. I suggest you to contact the manufacturer of the laptop to get help on this issue.

  Please let us know if you have more queries on Windows.

• The VM startup slow down, delay long before the guest operating system begins startup

  Evaluation of VMWare to set up the VM for the maintenance of the software. Set up a virtual machine, install Windows 7 SP1 32-bit, everything works well. Once started, the performance is excellent.

  The symptom is that when you start the virtual machine, either starting from cold boot or suspend, there is a significant delay before the power of VMware on / start screen is displayed. Once it appears, the operating system starts starting (or the recovery of wakefulness) quickly and performance is normal after that. During the start-up period, the whole system is insensitive, host and guest operating system.

  See the extract of newspaper below to 09:54:28.619 moment where the delay occurs followed by the entry concerning 09:55:11.625 time when start continues, a delay of 43 seconds during which nothing seems to happen and the system does not respond. After that, everything is fast.

  Any ideas or suggestions?

  More info...

  VMware Player version 6.0.1 build-1379776

  Host PC: Dell Optiplex, Intel Core2 Quad Q9650 3.00 GHz ABLE to

  Installed memory: 4.00 GB (3.25 GB usable)

  Boot disk C: Intel SSD, 180GB (where the VMware is installed)

  Data disk F: Seagate 1 TB (where the virtual machine)

  SE host: Windows 7 Professional 32-bit SP1

  Guest OS: Windows 7 Professional 32-bit SP1

  excerpt from VMware.log:

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: VMMEM: initial booking: 1442MB (1024MB = MainMem)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched_PowerOn: minGuestSize ball 104857 (80% size required min 131072)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem reserved (in MB) min max recommended 128 2493 2493

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: PShare: activated 1 1 Adaptive scanRate [16, 400]

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem 5159 262144 np 35890 pg 590258 anon

  2014 02-19 T 09: 55:11.625 - 05:00 | VMX | I120: MemSched: numvm 1 locked pages: num 0 max 605661

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: locked Page limit: host 638514 config 638208 dynam 613853

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: minmempct 50 minalloc 0 admitted 1

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | W110: NUMA: application of automatic dimensioning VM ignored

  configuration (.vmx) VM file:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "10".

  scsi0. Present = 'TRUE '.

  scsi0.virtualDev = "lsisas1068".

  SATA0. Present = 'TRUE '.

  memsize = "1024".

  MEM.hotadd = 'TRUE '.

  scsi0:0. Present = 'TRUE '.

  scsi0:0. FileName = "BCDEVVM.vmdk".

  SATA0:1.present = 'TRUE '.

  SATA0:1.filename = "E:".

  SATA0:1.DeviceType = "cdrom-raw"

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "bridged".

  ethernet0.virtualDev = "e1000".

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  USB. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  ehci.pciSlotNumber = "35".

  Sound.Present = 'TRUE '.

  sound.virtualDev = 'hdaudio '.

  sound.fileName = 'speakers (SoundMAX Integrated D.

  Sound.AutoDetect = "FALSE".

  MKS. Enable3D = 'TRUE '.

  Serial0.present = 'TRUE '.

  Serial0.FileType = "thinprint".

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  hpet0. Present = 'TRUE '.

  usb.vbluetooth.startConnected = "FALSE".

  displayName = "BCDEVVM."

  guestOS = "windows7"

  NVRAM = "BCDEVVM.nvram."

  virtualHW.productCompatibility = "hosted".

  gui.exitOnCLIHLT = "FALSE".

  powerType.powerOff = 'soft '.

  powerType.powerOn = 'soft '.

  powerType.suspend = 'soft '.

  powerType.reset = 'soft '.

  extendedConfigFile = "BCDEVVM.vmxf".

  gui.lastPoweredViewMode = "full screen".

  UUID. BIOS = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  UUID. Location = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  scsi0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "160".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  sound.pciSlotNumber = "34".

  vmci0.pciSlotNumber = '36 '.

  SATA0.pciSlotNumber = "37".

  scsi0.sasWWID = "50 05 05 62 bb c9 b7 b0.

  ethernet0.generatedAddress = "00: 0C: 29:E6:38:E3.

  ethernet0.generatedAddressOffset = '0 '.

  vmci0.ID = "1508260067".

  vmotion.checkpointFBSize = "134217728.

  cleanShutdown = 'TRUE '.

  softPowerOff = 'TRUE '.

  USB:1.speed = '2 '.

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  USB:1.port = "1".

  USB:1.parent = "-1".

  SATA0:1.AutoDetect = "FALSE".

  tools.syncTime = "FALSE".

  unity.wasCapable = "FALSE".

  tools.remindInstall = "FALSE".

  toolsInstallManager.updateCounter = '1 '.

  checkpoint.vmState = «»

  Monitor.virtual_mmu = "automatic".

  Monitor.virtual_exec = "automatic".

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = 'hidden '.

  USB:0.port = "0".

  USB:0.parent = "-1".

  USB. Generic.AutoConnect = "FALSE".

  serial1. Present = 'TRUE '.

  serial1. FileName = "COM1".

  floppy0. Present = "FALSE".

  Hello

  I know what you want to say as I've seen sometimes as well. But especially on older hardware or if there are problems with regard to particular resources. For example I saw this on an ESX host (yes I know product different) where there was a problem with the storage not enough providing IOPS / s.

  I saw also this on older versions of Linux (IIRC 7) workstation where the host had an Atom based CPU, there I updated to more RAM and a more recent version of the workstation and the problem disappeared.

  Then I also saw it on the 4/5 merger when my host operating system was out of memory and I tried to start another operating system to prompt anyway.

  I do not consider a normal behavior for the slow start and does not respond, it is an indication that the hypervisor is seeking some resources, but does not receive them fast enough.

  The reasons can be many. Indeed things like antivirus could be biting you if she tries to analyze all files (including virtual disks) at their opening.

  FWIW, I also understand the support response as would be expected if your host is a bit thin on the resources (for example, trying to start a VM 1 GB on a host Win7 with only 3.5 GB of RAM) and if the virtual machine runs OK after the initial startup delay, it's mostly just an annoyance.

  --

  Wil