Small loop Board problem

Similar Questions

• for loop Board problem

  I'm really new to programming in labview (started on Monday). I followed the toturials of labview and online or Web site, but I have not been able to solve.

  Edit: all the values in the table are the same...

  Maybe someone here can take a look.

  
  

• When I print an e-mail using firefox as my browser printing so very, very small. No problem with Internet Explorer. This happens with my Gmail and my AOL emails.

  My e-mail print in very small characters (illegible). This happens in my Gmail and AOL e-mail accounts. When I use internet explore does not happen. I studied the answers online, and it seems that if I go to Firefox > file > layout > scale and the game to 100% it can solve the problem. However, I can't figure out how to make the first step. Where can I find 'file '?
  Sorry to be such a dummy.

  1 orange Firefox button in the top-left corner - then click on print - then click on Page Setup

  2. If this orange Firefox button is not displayed and the bar of menus is - to open the file - click to open the Page Setup

• Failing video card? Or a logic board problem?

  Re: video card failure?

  It is a follow-up to a previous debate.  Less than 2 years ago, I had a default videocard from apple (OEM) with lines of scratches on the screen.  I replaced it with a

  ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro Apple sold by: JAG technology it worked fine until I have let my old Mac 2008 for 9 months. When I turned it on to use for art, the startup has been slow and the screen became often black or never turned on at all. And the map seemed to be running really hot.    I pulled the card according to the suggestions and started and checked start with Hello time and on screen sharing my network and it seemed to have a time of normal start for this computer. But when doing screen sharing the screen remains black. So, I can see the contents of the hard drive, etc., but there is no display.

  I ran TechTool Pro and all components on the Mac pass inspection including the video ram.    I wonder if the problem is a graphics processor integrated on the system board itself or just the graphics card.    If the chip card display does not work, shouldn't be able to see a display from a distance even in the absence of a graphics card? Or not?   I don't want to pay $150 to replace a card if it is bad.

  Thank you for your help.

  The f

  There is no piece of the display on the map. For video, you need a working video card.

  Try reinstalling on both ends of the cables of two power between the card and power on the logic board UAX connectors.

  Check that the fan turns freely

• What are the Causes of 'loop Hang"problem with file i/o when using timed multiple loops on one OR cRIO-9012?

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  I experienced a problem with an application. I think I've isolated the problem in the "Timed loop question - Source Code.zip" attached source code. A detailed list of my results are in the attached document "Timed loop detailed question - Results.docx.

  Overview - it seems to be closely related to the IO files and the use of "Timed loops" on the OR cRIO-9012

  1. If I activate the e/s in two loops, then two loops crash simultaneously

  2. If I activate only the e/s in a loop, then only this loop crashes

  3. If I activate the e/s in two loops and make a 'While' loop earrings, then it don't crash

  4. If it is wrote nothing in the file I/o, then it don't crash

  5. If the reference to the file is left open instead of opening and closing on each call, so it don't crash

  6. If I try to run it on "My Computer", then it don't crash

  7. If the IO is only activated in a loop and programmed to wait for one second between the file access, then it always crashes

  In my real application, any given row is only writing (at least) once a minute, but I couldn't still my application to plant within a period of 24 hours by writing a single error of a single loop once per minute, with a low CPU use. It was the impulse to test the seventh point above.

  It seems that the best solution was to open the reference to the file and let it open. I think it is a good practice in general and I'll do the update in the application. This should solve the problem, but it is very difficult to verify this due to the sporadic nature of the question. As such, I'd like to understand what was causing the problem so I can verify that it was fixed. So far, my attempts to create a single, coherent theory able to explain all aspects of this issue have failed.

  I just wanted to know at all that there has been a request for corrective action (CAR #214156) has filed for this issue to be fixed in a future release. This seems to be a problem with the VxWorks operating system, we use in real time. We have additional cRIO chassis which have a Pharlap OS where it does not work. For now, you can search for this CAR ID notes to see if this problem has been resolved for publication in the future.

  Currently, there are two solutions, we have identified for this problem:

  1. open the file before the loop and close it after. (recommended)
  2 perform file i/o in a normal loop and transfer data to a queue.

• Strictly increasing Board problem

  I run a strange problem when you try to create a Subvi which would check if input of U32 1 d-array numbers is in order with regard to strictly increasing index. A Boolean output is true if this is the case (maybe there is an easier way to check?)

  When I hit the run button continually to check it out, it seems to work for most of the time, but sometimes I get a true value even if the elements are clearly not ascending or have identical values.

  The image attatched I put probes on wires to see what values they have. As you can see that is the item index 4-2 and 1 respectively. The higher or equal-function is defined for comparing aggregates, but it says that-2 > = 1 is true?

  Is there a problem with the old data still in memory or something?

  Thanks in advance

  Oscar

  Hi Oscar,.

  no need to use a loop FOR:

  

  To your question:

  Choose the method of comparison can have side effects on the result of the comparison. Be sure to read the help...

• Webview from landscape orientation to portrait mode causes the font size to become smaller and a problem with the context Menu

  Hi, I have a webview with inline html. It works fine except that when I pass in landscape mode, the screen fills fine and the police grows, but when I go back to portrait fonts are tiny, even smaller then when initially in the portrait. I am installing this on a Z10 with cascades 10.1 SDK. Is this a Bug somewhere in the SDK or BB10?

  Another problem I have is in Web mode, the shortcut menu appears when I touch a Word. I is no need to use the context menu. How can I get rid of him. In the case where I would like to someday use this menu, I would need to add code to it. I can't find the code. Where can I find it?

  Thanks for your help

  Concerning

  Roland

  I' to propose taying far WebView as much as possible and using TextArea (with type HTML). There are still a few bugs present in WebView that make it unpleasant to use.

  You cannot get rid of the context menu, so it will disappear once you remove WebView. You can still share with other methods.

  This may seem more work and it's probably, but it's going to do to improve the user experience and fewer headaches for you.

• Watch an interactive pdf - page break at the touch on the screen - SMART board problem?

  Is there a way to disable the page advance when you touch the screen in the visualization of interactive PDF files?

  Adobe Acrobat Pro X c. 10.1.3

  Reading and full screen, I have the url and the navigation links that work very well.

  But when I 'touch' the screen out of one of these live areas with my cursor, the page goes to the next.

  I could avoid this but I'm worried about my customers who will use it on a SMART board.

  I foresee it as a problem when displaying on a SMART board (I don't have access to one) where the teacher is pointing to something on the page, and he lurched suddenly to another, or when you use the SMART display writing tool, it can jump.

  Anyone?

  Thanks for your thoughts.

  Nothing you can do in the PDF itself, but on the dialog box Preferences for Acrobat/Reader, full-screen you need to disable «left click to go forward one page...» "option.

• A loop createTextField problem

  Hello all, I have not done too with a loop, so I have a question.
  
  I'm creating a text field to the runtime, then loop to say 10 times. creation of the loop I can, where I'm having my problem is to use the created text fields.
  
  ///////////////////////////////////////////////////////////////////////////////
  
  posLR = 10;
  posUD = 90;
  loopVar = 0;
  nameVar = "Test" + loopVar;
  
  
  {}
  This.createTextField("hello_txt",0,10,10,100,20) (nameVar, this.getNextHighestDepth (), posLR, posUD, 300, 20);
  Testing0.text = "test 1 text ';
  loopVar ++
  posUD = posUD + 20;
  } all in loopVar < 10;
  
  ///////////////////////////////////////////////////////////////////////////////
  
  the code above creates the first text box, but I don't want to say Testing0.text = «...» ', Testing1.text = '... ", ect.
  
  How can I use these text boxes the correct way (I have to use a table) I don't know even where to start (I know no less on the tables then loops).
  
  Thanks for the help
  ~ Chris

  with a table

• Test the Oracle Instance on the smaller box (RAM problems)

  I got the task of taking an existing database of production and creation of a database of test on a much smaller box. The production box has 48 GB of RAM and eight CPUS (Itanium running HP - UX 11.23). The test box has four gigabytes of RAM and a processor. We had a process in place in the past to do this for Oracle 9i. All the data files, redo logs and Oracle 10g binaries are hosted on an HP EVA SAN, so we use snapshot or mirror of the cloning technology during the production on the test server instance.
  
  On Oracle 9i, we used to copy the data, delete the control files, then run a script to create new files of control for the test instance. I don't know if the old 9i writing work and have not yet tested this part. Mainly because I have problems to get the test instance to start reliably in the first place. When I copied all the data on, I changed the tnsnames.ora to reflect the host name of the new machine. I made a few adjustments in the file init.ora for production DB as well. At the beginning, I was able to start the database and everything seemed fine. But when I tried to stop him, he gave me the following error message:
  
  [07:32] [oracle@OracleC:~]$sqlplus "/ as sysdba"]
  
  SQL * more: Release 10.2.0.1.0 - Production Wed Jul 22 07:32:11 2009
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  Connect to an instance is idle.
  
  SQL > startup nomount;
  ORA-03113: end of file on communication channel
  
  
  This error is broad enough that I am certain that what he means is a bad server configuration of database for me probably a problem in the init.ora or SPFILE with a parameter that is calibrated for 48 GB box, not the box of 4 GB.
  
  Here's what I have in my init.ora file:
  
  ===========================================================================
  
  ###########################################
  IO and cache memory #.
  ###########################################
  DB_BLOCK_SIZE = 8192
  
  ###########################################
  # The library Cache and sliders
  ###########################################
  open_cursors = 300
  
  ###########################################
  # Diagnostic and statistical
  ###########################################
  background_dump_dest = / oracle10g/admin/prod/bdump
  core_dump_dest = / oracle10g/admin/prod/cdump
  TIMED_STATISTICS = TRUE
  user_dump_dest = / oracle10g/admin/prod/udump
  
  ###########################################
  # Distributed replication and snapshot
  ###########################################
  db_domain =""
  Remote_login_passwordfile = EXCLUSIVE lock
  
  ###########################################
  # Configuration file
  ###########################################
  control_files = ("/ oradata10g/prod/control02.ctl",)
  "/ oradata10g/prod/control03.ctl"
  "" / oradata10g/prod/control04.ctl ")"
  
  ###########################################
  # MTS
  ###########################################
  # Uncomment the following line when your listener is configured for SSL
  # (listener.ora and sqlnet.ora)
  dispatchers # = "(PROTOCOL = CST)(SER=MODOSE) ', ' (PROTOCOL = CST)(PRE=oracle.aurora.server.GiopServer) ', ' (PROTOCOL =)(PRE=oracle.aurora.server.SGiopServer) CST.
  "Dispatchers ="(Protocol=TCP) (SER = MODOSE) "," (PROTOCOL = TCP)(PRE=oracle.aurora.server.GiopServer) ","(PROTOCOL=TCP) (PRE = oracle.aurora.server.SGiopServer) "
  
  ###########################################
  # Various
  ###########################################
  compatible = 10.2.0
  db_name = prod
  
  ###########################################
  # Network registration
  ###########################################
  instance_name = prod
  
  ###########################################
  # Pools
  ###########################################
  JAVA_POOL_SIZE = 24 M
  #shared_pool_size = 1610612736
  # is moved to 128M by George Lenzer to the TEST instance on 06/07/2009
  shared_pool_size = 134217728
  
  ###########################################
  # Process and Sessions
  ###########################################
  process = 500
  
  ###########################################
  Recovery and # redo Log
  ###########################################
  fast_start_mttr_target = 300
  
  ###########################################
  # Sort, hash joins, index Bitmap
  ###########################################
  #sort_area_size = 5242880
  
  ###########################################
  # System managed Undo and Rollback Segments
  ###########################################
  #undo_retention = 7200
  UNDO_RETENTION = 14400
  UNDO_MANAGEMENT = AUTO
  undo_tablespace = UNDOTBS
  
  UTL_FILE_DIR = *.
  
  DB_FILES = 256
  
  # The value db_cache_size 128M for the TEST by G instance. Lenzer 07-02-2009
  
  db_cache_size = 128 M
  db_file_multiblock_read_count = 8
  
  #log_archive_dest = / ora_archlog
  #log_archive_format='arch_%r_%t_%s.arc'
  
  # the recommendation is 1 per UC
  
  db_writer_processes = 1
  
  sort_area_size = 10485760
  
  ===========================================================================
  
  There is also a little info. When I try to start the DB and it's just sitting there, my only way out is to kill the process only oracle executes:
  
  Oracle 4370 4365 247 09:27:18? 09:59 oracleprod (DESCRIPTION =(LOCAL=YES) (ADDRESS = (PROTOCOL = DOB)))
  
  Then I run "ipcrm". But if I run "swapinfo", it always indicates that most of the system's RAM is eaten up:
  
  [09:38] [root@OracleC:~]$swapinfo
  Ko Ko Ko START PCT / Kb
  TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
  dev 4194304 0 4194304 0% 0-1/dev/vg00/lvol2
  dev 4194304 0 4194304 0% 0-2/dev/vg00/lvol10
  reserve - 8388608-8388608
  memory 4182760 4070604 112156 97%
  
  I can't to free up RAM (which is usually about 20% used) after the start of Oracle attempt. The kernel parameters are defined for Oracle9i recommendations, so that they should not be too far from what is recommended for Oracle 10 g.
  
  I worked on it for about two or three weeks and I am almost of ideas. So any suggestions are welcome.
  
  Published by: deckard2 on July 22, 2009 07:05

  Here's a quick explanation: http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/ofa.htm#sthref872
  (this is for Windows, but also OK for Unix)

  You can put your SPFILE or INIT files in the directory admin/pfile but Oracle looking at this place unless you create a Unix link in $ORACLE_HOME/dbs /.

• Virus or the logic board problem?

  Everyone has this screen before? Another screen that appears is a bunch of letters and numbers. Now my computer won't even turn on half the time. Sometimes just the fan will start the liquidation. Before what is going on started my computer would freeze and then turns off randomly. I called apple and I also took at the Genius Bar. They think maybe it's logic board. The Lady said that my best money wise option would be that she be sent for $280, more repairs before as I do that I wanted to see if anyone had any advice. At this point, I wonder if I should just get a new computer. I don't use the computer a lot to the point where this should be the case. Would it maybe a virus?

  

  No, it is not caused by malicious software.

  You must replace the system board, if you want to keep the Mac.

  Best.

• T400 - 6474CTO - key board problem

  All of a sudden this problem occurred: n, b, space, arrow to the top right left suddenly stopped working. Working now and then, for the most part. KB has changed; the same problem.

  Any clue?

  I change the motherboard. Problem solved.

• Timed loop closure problem

  Hello world!

  I'm working on a project with more comlex VI included, and I have some problems with the closure.

  I want to manage a statemachine Central stop, here I get a Notifier and send a bool cluster. The first element of the bunch is true if the closing process can begin, and then all VI before actually writing the corresponding element of cluster true, so ultimately I can check if all VI had wound up down correctly.
  It goes perfectly with each VI written by myself, the problem appeared when I tried to change third party VI. The VI is required, this is the original watchdog of a motor controller, so it is not possible do not use.

  So there is a TimedLoop in this VI, and it seems that the TimedLoop the Notifier is not refreshing itself inside, so I don't have the chance to stop him.

  Can you give me some advice, what tool could I try to use to give a command of the machine of the State of closure?

  Thanks in advance!

  In the meantime I discovered that there was a problem created by myself outside of the VI.
  Thanks for the help!

• Board problem and number

  I encountered a problem while writing a special sub.vi whose purpose is to depend on a specified range, spit out a bunch of different test settings.

  The problem, as shown in the spare part, has to do with the fact that the majority of the beaches, it spits out a table frequencies to test.  However, there are some beaches that require only 1 test frequency, and I can't do a painting that is only 1 entry.

  This .vi acts as a sub.vi in a larger program, and I really need them to go all the same (the 'Frequencies' table) indicator.

  In the cut wire insert a table to build.  It will create an array with a single element.

  The exit flag requires a table.  The number of elements in the array can be 0, 1,... ~ 2 ^ 32.

  Lynn

• How do l fix doesn't have system board problem RTC accuracy test

  Hello

  When running my PC Checkup(system tests), l has a problem, the overall result of the test revealed that the card system, RTC accuracy Test
  WSBO1-HWX failed. How do l fix the problem so that the RTC accuracy Test will pass in the future?
  Kind regards
  Amos.

  Hi, Amos.

  What is your computer make and model and the Windows operating system?

  RTC - this test accuracy test verifies the accuracy of the RTC on the motherboard and compares it to the processor clock to determine if the motherboard and CPU clock are too out of sync. This test will discover problems with updates of time system, periodic interruptions and interruptions of the alarm. If the test detects errors with the accuracy of the RTC, it will record the test failure in report of the additional details in the test log.

  Your Windows system time may not be the same as the Bios time.

  Check in the Bios

  Compare with time Windows

  If the clock keeps losing time, check the battery

  You may need to replace the CMOS battery