Smoothing of the curved lines that intersect?

Similar Questions

• How can I remove lines that intersect?

  So I have to admit, I'm kind new to Illustrator and trying to figure out how to remove the lines that intersect this drawing I did, can be cut into a cutter to cut in one piece. The thing is, I don't know how to do. Here is the file, in which case it helps to solve the problem.

  https://files.me.com/eovnu87435ds/99tjo3

  Any help is greatly appreciated!

  First things first

  Select the two concentric circles of shift by clicking on it with the selection or direct Selection tool

  then go to object > compound path > make or the command (command) 8 to make a compound path of two circles

  then select the crossed rectangles and the path to the composed circle you just made

  with the three selected go to pathfinder Panel and click on the first icon at the top left (unit)

  and who will do

  

• Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

  Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

  Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

  Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

  http://www.Synaptics.com/resources/drivers

  above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

  Its such a relief to be able to settle this problem - THANK you

  Lets see if it sorts the problem MS Office too.

• How do you get back the small line that allows you to match the clips perfectly?

  Don't know how to explain it properly, but that the little line that appears when you move a clip so that you can match it up without overlap next to him?

  I managed to get rid of it and I have literally no idea how or how to go back, really need help because it's so difficult to match clips without her, they overlap or have a black screen between the two! I'm using Premiere Pro CS6.

  Any help would be great, thanks

  It took me a while to understand what it was that you were missing.

  Hit the S for snap (magnet).

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.

• How can I get the black line that perfectly align than the bars on the chronology of return?

  As small black line that goes to the bottom of the screen when I put two bars/clips side by side without overlapping one another.

  For the last two days, my Adobe first CC did not do that and I try to guess it. This has caused some clips to overlap. This slows down my editing because I have to make sure that the place is perfect, and sometimes very difficult to do manually.

  Could someone help me with this please?

  Thank you.

  you have disabled snap? This is the icon of the magnet on the editing toolbar.

• Adding fields amount dynamically to the curve line bar

  Hello
  
  I draw a graph, the line graph, for all the bars, Amt of 2010, fiscal 2011 Amt, Amt 2012 ampount fields come from the database. The amount target for fiscal 2010, fiscal year 2011 and 2012, I don't have values that forms the basis of data, but the values are fixed. Fiscal year 2010 = 4 mill, fiscal year 2011 = 3 mill, Windmill 2012 = 4 FY. Without creating column in my database or the change of the RPD, how can I dynamically use these numbers in the answers to create the line in the bar line chart?
  
  Thanks for your time and your help.

  Hi ssk.

  You can have 3 duplicate columns and write f (x) as
  col1 = Case when year = end of fiscal year 2010 then "4mil.
  col2 = case when year = end of year 2011 and then "3mil".
  COL3 = case when year = end of 2012 then "4mil.

  And therefore to use in your line bar chart.

  Close all of your previous posts

  See you soon,.
  KK

  Published by: Kranthi.K on March 23, 2011 09:14

• Re: How to remove the black lines that prints when I use my ADF?

  I have an Officejet 6500 has more.  I only get the double lines when using the document feeder.  Fine when I use the flat bed.  I thoroughly cleaned the glass, and it makes no difference.  Help!

  The ADF in the Officejet 6500 a scanner glass is a bit more difficult to access, but the video in the third step of the second Solution in the here document will show how to clean this area.

• How can I cut a line that intersects a circle, as the rays to prune away a hub?

  When I use the circle tool adjusts the hub off the shelves. How do the opposite, rays away from the hub? (Novice, CS3, XP)

  Mike, if I understand you correctly, then all you need to do is invert the selection.   Select > Inverse or ' Shift Ctrl I '

  If I hurt myself, then download an example image would be useful.

• Part II of the curved line

  I thought I knew how to draw a curve at runtime by drawing to the average, but still the problems;  Here's what I've DONE WHERE I'm GOING WRONG? Thank you

  this.createEmptyMovieClip ("canvas_mc", this.getNextHighestDepth ());
  var mouseListener:Object = new Object();
  mouseListener.onMouseDown = function() {}
  this.isDrawing = true;
  This.new_x = this ._xmouse + last._xmouse / 2;
  This.new_y = this ._ymouse + last._ymouse / 2;
  This.orig_x = _xmouse;
  This.orig_y = _ymouse;
  This.target_mc = canvas_mc.createEmptyMovieClip ("", canvas_mc.getNextHighestDepth ());
  };
  mouseListener.onMouseMove = function() {}
  If {(this.isDrawing)
  This.target_mc. Clear();
  This.target_mc. LineStyle (1, 0xFF0000, 100);
  This.target_mc. MoveTo (this.orig_x, this.orig_y);
  This.target_mc. LineTo (this.new_x, this.new_y);
  }
  updateAfterEvent();
  };
  mouseListener.onMouseUp = function() {}
  this.isDrawing = false;
  };
  Mouse.addListener (mouseListener);

  You should update the last point whenever the mouse moves and you should be on average the last point and the point if you try to smooth out your line.

• How can I disable the function where my mouse over the double line that then creates a pop-up window?

  When I hover over a word or an expression that has a double line below, a suggestion box comes with a link that takes me to a site that is in regards to the word or phrase that I flew over.

  Hello kayjay76, this looks like a problem caused by some sort of adware on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• How can I remove the black lines that prints when I use my ADF?

  When I use my ADF my copies have 2 black lines going down the middle.  How can I remove them?

  OK, the 8600 Officejet Pro has two pieces of glass used for copying, the glass of the main copy, and a thin (~ 1 "wide) section of glass on the left side.  If there are black lines vertical on copies or analyses both flat glass and ADF, and then the question would be caused by a defect in the sensor scanning.  The most likely hypothesis is that copies of the scanner glass flat are OK but there is a vertical line on the pages sent through the ADF.  This is caused by a small spot, perhaps as small dust on the cutting Strip.  Holding a strong flashlight on the front of the unit to the position just above the t in the logo HP Officejet Pro on the front will highlight the region.

• How can I re create the curved line in the disabled icon? (image below)

  

  Here is a breakdown for you...

  Create the circle with the ellipse tool:

  

  (I put the 30pt race and selected the end of round cap option.)

  Turn the circle of 45 degrees:

  

  Using the direct selection tool, select the upper right:

  

  Delete:

  

  I hope this helps.

• Add text from the command line to the output so that I can know how a command has been run when it generated the output

  This is a question and a suggestion...

  I would like to be able to precede or add if it works, the command line in the output file that creates the order.

  Example:

  I run dcdiag with switches, etc. and create an output file of results that gets saved or sent to a person or just put it in a folder. Of course, it could be that someone else ran the command and then sent the file. Anyway the problem is the same - what was the exact command line that has been executed to achieve these results?

  Question:

  Is there a known way to do from the command line that I can apply to any command?

  Suggestion:

  If this isn't the case, then I would suggest MS to include this function in all the BACK and PowerShell commands able to produce text output.

  If all goes well they monitor this forum and find it's a great idea and send me a check (pinky in my cheek) a meeellion of dollars. Then I and I alone will rule the world.

  Here you go:

  d:\>format i: / FS: NTFS > format.txt
  d:\>echo i format: / FS: NTFS > format.txt

• Dividing the curves with loops and berries

  Greetings,

  I like a wave form and I need to divide the curve so that it consists of three segments, each segment starting at the value of a peak and ending to the next using loops and berries.  I also need to combine in a 2D array and draw the waveforms.

  I'm stuck on how to do it. I have attached my code.

  Can someone give me some ideas?

  Thank you!

  TheLT

  I'm picturing something along these lines.