Some camera time (IEEE1394) is disconnected

Similar Questions

• Time Capsule flashing disconnection.

  My 2 year time capsule is disconnected intermittently, when no internet and both times failed to connect with printers. Restart fixed both. TC is 7.7.3 and iMac is El Capitan 10.11.13. Should I buy a new one?

  You will find that this is not a problem simple replacement will fix.

  Certainly the latest model AC AE and TC are are not as long lived as many expected. There are a few flaws in the design.

  If you want to buy again I'll wait anyway for the next model as the current series is outdated seriously.

  This modem do you have? Brand and model please.

  We see a lot of problems with some cable modems... almost everything the cable serial port modems SB are the worst. However, the issue is widespread.

  It can also happen in bridge with a modem router or gateway... We must therefore know you run the TC as a router or bridge.

• El Capitan to 10.11.6 now airport Time Machine keeps disconnecting update

  I've just updated El Capitan to 10.11.6.  Now the airport Time Machine keeps disconnecting. Any suggestions?

  Time Machine is a software on your Mac, which is used to save the contents of your Mac (s) at an airport Time Capsule.

  An Airport Time Capsule is a wireless router with a hard drive built-in, designed to store backups Time Machine of your Mac (s).

  With this in mind, could you give more details about the problem you are having?  Disconnection from the airport Time Capsule or disconnecting from Time Machine?

  Do you get any error messages? If so, what exactly is the message that you receive?

• Windows 8 times the device disconnect sound...

  Windows 8 times the device disconnect sound, my screen goes black, then both the windows the device plug his and my monitor turns on again. All my windows open and then re sizes to the top left of the screen. This happens randomly as I work with the computer. I have a Dell Vostro 270 connected via a VGA cable to a Samsung S22B300. I checked the event logs and Device Manager. Everything seems good. Please help if you know what this may be.

  Typically, this means two things: either the cable is loose, or the video driver broke down.  Usually if it's the driver, you would see that in the event where newspapers and maybe even a notification bubble near the clock when you see your desktop yet (something like "your display driver recovered").

  Do you see something like that?

  In addition, when the problem started to occur?

• Time Capsule guard disconnect from the Internet

  I'm having a problem with my internet, and I'm running out of things to try. I've got the most recent Time Capsule with connection ca.

  I have replaced the cable modem and have removed my extender. Always get disconnected every 12 hours or more. I can still access my local network, just the internet disconnects. I did a hard reset and replaced the cables. Unable to connect WiFi devices. What are my options?

  Unfortunately, we do not have much in terms of specific details that would help us to try to understand what the real issue here might be... the things you may already have... but did not mention in your message.

  You connect your computer directly to the modem a few days see if Internet connection "holds" that way... or... If Internet disconnection problems still continue during the period of "test"?

  Have you had a technician from your Internet Service Provider (ISP), come out to your home to inspect all cables and connectors associated with the Internet line?

  What is the number and the model of the modem?  We ask this question because there are a few compatibility problems between the series SB-Motorola/Arris modems and the newer 802.11ac models of AirPort Extreme and Time Capsule from the airport.

  Who is your ISP?  Most of the suppliers are in the current process of implementation of a new type of Internet connection called IPv6 in their current systems, requiring updates and changes on the system that are supposed to happen during the night gently... but sometimes cause a loss of Internet connection in the process. IPv6 implementation goes relatively smoothly for most suppliers, except a major player in particular who asks various questions documented with current Apple routers.

  Finally, there was some problems power stability on newer routers AirPort, causing a momentary intermittent loss of power resulting in an interruption of the connection when the airport restarts automatically. This question is very difficult to catch, because it happens very quickly and it must almost be watching time to know that it took place at the airport.  If everything else goes out, it may be the router from the airport that needs to be replaced. I personally had this problem, and the only solution was to replace the AirPort base station.

• Several times (not all the time) when I disconnect my lap top and then plug it back, the computer crashes and I have to restart manually.

  I called Dell a few weeks ago.  They had me remove the battery, press the power button 15 X and then restart.  They did a scan of material and said that everything was going well.  I ran once again virus scan software, and there is no virus.  I deleted all temporary files.  They said that perhaps, it might be a problem of software somewhere but wanted a ridiculous just to check amount only.  Do I have other options as to how can I fix?  This is a NEW computer that I just received in August!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------------------

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 the love of the updated drivers that can drastically affect the performance so I would update the main
  drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Camera Raw Panel Options with some cameras

  I have CC 2015. When I open a bridge raw file in Camera Raw, I see a bunch of sliders on the right (color balance, exposure, etc., etc.). However, some of the pictures of a certain photographer who uses a Canon EOS 5 d Mark III camera, have what looks like a set of sliders in Camera Raw much older. Looks like Camera Raw options I had several versions ago when I open the raw files from my Nikon SLR. Also, I noticed that the options aren't always the same thing with different shoots of the same photographer. In addition, when I bought a new camera from Nikon, I noticed that options in Camera Raw has been a little different from the one they were older photo with my camera.

  What causes this? I searched the web and can't find any info about it anywhere. How are the options in Camera Raw controlled? This is the firmware of the camera? This is the software used to get the pics off the camera? Is this other thing? Please tell me how it works, I can tell the photographer what to do about it.

  Click on the Calibration of the camera, select the process version.  2012 is the last with all the sliders.  If your friend PS is old enough it maybe not 2012 as an option.  Also old raw images may have been addressed in an earlier version, can click the question exclamation mark down for updating to the last process.

  Richard Southworth

• Install Linux host - need to install some 1st time help

  I am trying to install "Server 2.0.1" on a Linux host (Kubuntu 9.04 'Wild'). I have reviewed the user guide and install the docs, but need jump start information so I can go.

  1. after installation of VMware server, install the Windows XP operating system together?

  (a) install the Windows XP operating system using a virtual machine console

  -OR-

  boot from the Windows CD and do a bunch fresh duel b) install along side Linux?

  -OR-

  (c) is it better to have Linux and Windows OS is installed before installing VMware Server?

  I probably have more questions, but I will stop here until I get some advice on how to proceed.

  Thank you!

  You can do everything above - normally, I would say to do a clean hd and partition it if you have what you need for the two operating systems - or use a tool such as Partition Magic to calve until you already have (if you do not want to go back to a clean slate).

  The benefits are that each OS can see the equipment (and use) it's own - so multimedia will be better - but you have to devote resources in advance.

  You can have Linux and XP installed with the server at a time, running the opposing OS... which is a bit random!

• Just upgrade El Capitan 10.11.6 now airport Time Capsule guard disconnection

  I can unplug, count to ten, reconnect and it connects sometimes, more often "connection failed."  When it connects it only got maybe an hour, then disappears.

  I DO NOT HAVE BACK TO MY MAC this problem goes beyond.

  Powering down of the Airport Extreme/Time Capsule for about 15 seconds and then power back on. As soon as you see the green light, you should be able to see him for a minute or two in the Airport utility. In the affirmative, and see if you have Back to My Mac active. If so, disable it by removing all the e-mail addresses of the back section of my Mac. Then update your Airport Extreme. Work quickly.

  Many have started having this problem within the last week, probably because Apple changed something in its servers CCMM. A real difficulty would come from Apple, but it should work if you currently have active CCMM.

• Double click on attachments causes section turning TH inactive for some big time

  Hi everyone, I had a problem with TH:
  After the section of the open attachments, if you double-click the file through the white space opens to allow you to add other accessories.
  The thing is that, in doing so, e becomes inactive and will open the windows of navigation than after about 30-40 seconds.
  I use 38.0.1 version. Anyone else having the same problem?

  To diagnose problems with Thunderbird, try the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Time Capsule randomly disconnecting Internet

  My light on my Calsule time will turn orange and will randomly stop to connect to Internet for seconds or hours or even days. Have cycled power, factory reset and set up a new Wi - fi network several times, but it still does not work properly. Any help is appreciated.

  Unfortunately, not much info here at all to go. We need basic information... things like...

  What model of Time Capsule?

  Approximate age?

  How long time Capsule work OK until this problem appeared?

  You use a Mac or a PC to put in place the time Capsule?

  This computer is running which operating system?

  What to do and the model number of the modem are you using?

  You have swapped the Ethernet cable between the modem and Time Capsule?

  Do you have connected to your computer directly to the modem and let it run a few days to look at the link in this way to see if the Internet happen like that?

• Greetings from display in the indicator chain for some a time real (timestamp)

  I need help for display of greetings

  "good morning".

  • After 12:00
  • before 12:00

  "good afternoon".

  • After 12:00
  • Before 18:00

  "Good evening".

  • After 18:00
  • Before 12:00

  I have attached my program so far for the real-time display

  With the help of the hour off the time stamp for driving a deal structure.

  

• The terminal on condition of some wiring time loop created by the script of LabVIEW

  Hello

  I've written a VI creating a VI scripted that contains a while loop. So far so good. The problem is that I want to connect a Boolean control to this while loop conditional Terminal. I thought I could do that is by using a property or an invoke node, but I couldn't find a way to access the machine.

  Anyone know how to access the conditional terminal using a node or have another idea to solve the problem?

  Kind regards

  Steffen.

  Hi no87,.

  attached, you will find a complete example.

  Hope that help.

  Best regards

  Mencef

• My EC1705 cricket broadband doesn't connect to the internet why doe I must activate the device every time, I must disconnect and reactivate every time. ?

  I have a desk top hp compaq presario with windows seven to have cricket broadband $40 monthly plan with a cricket EC1705

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the links and check out them.

  Method 1:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, your antivirus software is disabled.

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• HP G42-230us optical drive update

  I recently bought a HP G42-230us. I was wondering if I can upgrade the optical drive with a blu - ray player stock? I searched a bit on the internet but had no luck.

  Portable SATA optical drives are all the same size, it is because the media are.

  It works over there, Windows will automatically install the drivers for you. It was reported that Sony's Blu - ray discs have incompatible driver problems, so avoid the Sony. Samsung and Panasonic are good choices, Toshiba would probably be good too.

  http://CGI.eBay.com/Samsung-Blu-ray-BD-ROM-8X-DVD-RW-laptop-SATA-drive-new-/370491248810?PT=PCC_Drives_Storage_Internal&hash=item5642ffd0aa

  The rear mount which is held in place by two screws philips is reused on the new drive and the plate of the front on your old drive is mounted on the new drive.

  http://www.YouTube.com/watch?v=9CpOL8y2B9Q

  The video drags on a bit, but it gets to the part where he finally removes the bezel face plate.

  This version of Media Smart should work well with your ATI graphics card.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49489.exe

  Save it on the desktop and then to download 7 - Zip and restart.

  http://www.7-zip.org/download.html

  Right click on the install Media Smart file and use 7-Zip to "extract files". Click this folder and look for the CBC. From there, look for the Setup file sixth one at the bottom) to install MS DVD.

  When it came time to install, disconnect from the internet and disable your anti virus and firewall software.

  Restart your computer after the installation and activate your firewall and antivirus, if this is not done automatically.