Some graphics are still distorted in the exported sequence

Similar Questions

• Hello, I have my PC connected to my HDTV and when viewing websites on firefox, Web sites are too small to read. What can I do to solve this problem. I tried dling the add-on no. Squint, but some sites are still distorted. Thanks for your help

  My PC specs:
  Intel Core 2 Quad 2.5 GHz
  NVIDIA 9800GT video card
  600 GB of Seagate hard drive

  The TV is a Philips 720 p (not exactly what model it is)

  You can increase the chain pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 steps to discover what works best.
  In Firefox 3.6 and later this pref is a string parsed in float value and allows you to adjust the dimensions of all elements more precisely.

  See http://kb.mozillazine.org/about%3Aconfig

• Possible bug - video frames are jumping all over the exported sequence, but not on the original

  Hi all

  I recently used first todo some basic video editing.

  When I released the final movie executives seem to jump around and it seems really dodgy.  See the example below and you'll see what I mean

  • The original for this clip source file plays very well (without any image jump) in all playes video, including the first one.
  • I tried to get out about each different type of available video format, but executives still jump
  • I use Premiere CS4 and the original video was recorded on a Samsung camcorder, which uses the codec of samsung SOUSOU.

  We never seen anything like this before?  I tried to play round with different settings, but still can't seem to get rid of the image jerky.

  Any help would be grately appreciated.

  Thank you

  Simon

  Convert this hardware Samsung to something editable RA, as MS DV AVI type2 before use, or use an application to Samsung.

• Restart fails. Error message: The Finder cannot quit because some operations are still ongoing.

  Unable to shut down or restart. Dialog box shows "The Finder cannot quit because some operations are still ongoing." I'm unable to find it than those who are. Ran disk utility and tried again with the same result. Sure would appreciate your help!

  My MacBook is a 13-inch aluminum, late 2008, Running OS X 10.11.3

  System report:

  Presentation of the material:

  Model name: MacBook

  Model ID: MacBook5, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 2.4 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: MB51.007D.B03

  Version of the SCM (System): 1.40f2

  Serial number (System): W8919BPH8QT

  Material UUID: 64CA23AE-66AA-510A-9A68-95E35F1AC9F5

  Motion sensor sudden:

  Status: enabled

  Sudden

  At ran Etrecheck, with the report as follows:

  EtreCheck version: 2.9.3 (253)

  Report generated 2016-02-11 14:08:26

  Download EtreCheck from http://etrecheck.com

  Duration 09:27

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Could not complete the following internal tasks:

  / usr/sbin/system_profiler - xml SPUSBDataType

  Problem: Another problem

  Description:

  Unable to restart or shut down. Error message indicates the operation is running, but I don't know what it is.

  Hardware Information: ⓘ

  MacBook (13-inch, aluminum, late 2008)

  [Data sheet] - [User Guide] - [Warranty & Service]

  MacBook - model: MacBook5, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  0/DIMM1 BANK

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 161 - SN = W024902CY6GOA

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about 7 days

  Disc information: ⓘ

  TOSHIBA MK2553GSX disk0: (250,06 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 249,20 go-go (174,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ-868)

  Configuration files: ⓘ

  / etc/hosts - Count: 1

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. Starfield.backupservice.plist

  ~/Library/LaunchAgents/com. LogMeIn.Cubby.Updater.plist

  ~/Library/LaunchAgents/com. MLBAM.nexdef.plist

  ~/Library/LaunchAgents/join.me.Launcher.update.PerUser.plist

  4 unknown files found. [Check files]

  Kernel extensions: ⓘ

  /Applications/transmit.app

  com.panic.TransmitDisk.transmitdiskfs [no charge] (4.0.0 - 10.5 SDK) [Support]

  / Library/Extensions

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.7 - 10.4 SDK) [Support]

  [loading] com.squirrels.airparrot.framebuffer (5 - 10.10 SDK) [Support]

  [loading] com.squirrels.driver.AirParrotSpeakers (1.8-10.8 SDK) [Support]

  / Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.7 - 10.4 SDK) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.7 - 10.5 SDK) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.7 - 10.4 SDK) [Support]

  / System/Library/Extensions

  [no charge] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Support]

  Launch system officers: ⓘ

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.FolderActionsDispatcher.plist [killed]

  com.Apple.CDPD.plist [killed]

  com.Apple.cloudphotosd.plist [killed]

  com.Apple.followupd.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.printtool.agent.plist [killed]

  com.Apple.RCD.plist [killed]

  com.Apple.rtcreportingd.plist [killed]

  com.Apple.scopedbookmarkagent.XPC.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  [loading] 151 tasks Apple

  [operation] 71 tasks Apple

  14 killed process lack of RAM

  Launch system demons: ⓘ

  com.apple.AssetCacheLocatorService.plist [killed]

  com.apple.GSSCred.plist [killed]

  com.Apple.awdd.plist [killed]

  com.Apple.Emond.aslmanager.plist [killed]

  com.Apple.ifdreader.plist [killed]

  [killed] com.apple.periodic - weekly.plist

  com.Apple.softwareupdate_download_service.plist [killed]

  com.Apple.system_installd.plist [killed]

  com.Apple.wdhelper.plist [killed]

  com.Apple.XPC.SMD.plist [killed]

  [loading] 191 tasks Apple

  [operation] 86 tasks Apple

  10 killed process lack of RAM

  Launch officers: ⓘ

  [failure]... com.adobe.ARMDCHelper.cc24aef4a1b90ed56a [Support] plist

  [loading] com.google.keystone.agent.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [failure] [support] [details]

  [failure] com.teamviewer.teamviewer_desktop.plist [Support]

  [loading] org.macosforge.xquartz.startx.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [Support]

  [failure] com.adobe.fpsaud.plist [Support]

  [operation] com.backblaze.bzserv.plist [Support]

  [loading] com.barebones.authd.plist [Support]

  [loading] com.ciscosystems.ciscoconnect.daemon.plist [Support]

  [loading] com.google.keystone.daemon.plist [Support]

  [loading] com.logmein.join.me.update - helper.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  [operation] com.seagate.TBDecorator.plist [Support]

  [operation] com.starfield.backupservice.plist [Support]

  [loading] com.teamviewer.Helper.plist [Support]

  [failure] com.teamviewer.teamviewer_service.plist [Support]

  [failure] com.vmware.launchd.vmware.plist [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist [Support]

  User launch officers: ⓘ

  [failure] com.adobe.ARM. [...]. plist [Support]

  [operation] com.amazon.music.plist [Support]

  [operation] com.backblaze.bzbmenu.plist [Support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]

  [loading] com.logmein.cubby.updater.plist [Support]

  [operation] com.mlbam.nexdef.plist [Support]

  [operation] com.seagate.dashboard.plist [Support]

  [loading] join.me.launcher.update.peruser.plist [Support]

  Items in user login: ⓘ

  Dashlane Application (/ Applications/Dashlane.app)

  Agent application RealPlayer Downloader (~/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)

  Degree application (/ Applications/Degrees.app)

  Sophos Anti-virus UNKNOWN (missing value)

  MacUpdate desktop hidden UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Join.me Application Launcher (~/Library/Application Support/join.me/join.me Launcher.app)

  HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app)

  HP product search request (/ Library/Application Support/Hewlett-Packard/Customer Participation/HP product Research.app)

  HPEventHandler UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] at.appscape.degrees.24352

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000a.EvernoteHelper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001f.EtreCheck

  [ongoing] com.dashlane.DashlaneAgent

  com.evernote.Evernote.25952 [loading]

  com.evernote.EvernoteHelper [loading]

  [ongoing] com.getdropbox.dropbox.25312

  [ongoing] com.LogMeIn.join.me.Launcher.167712

  [ongoing] com.RealNetworks.realplayerdownloaderagent.95072

  [ongoing] JP.co.Canon.cijscannerregister.2272

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  Web of Google Earth plugin: Version: 6.0 [Support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.0.11 [Support]

  AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Support]

  RealPlayer Plugin: Version: unknown [Support]

  AdobePDFViewerNPAPI: Version: 15.010.20056 - SDK 10.8 [Support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - SDK 10.6 [Support]

  Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - SDK 10.6 obsolete! Update

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  iPhotoPhotocast: Version: 7.0

  AdobePDFViewer: Version: 15.010.20056 - SDK 10.8 [Support]

  SharePointBrowserPlugin: Version: 14.6.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: 8 73 02 check the version build update Java

  User Plug-ins internet: ⓘ

  WbeTools64_14: Version: 1.0.22.49 © 2012 - SDK 10.6 [Support]

  WebEx64: Version: 1.0 - SDK 10.6 [Support]

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]

  fileEditTool64_15: Version: 1.0.35.65 © 2013 - 10.6 SDK [Support]

  FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]

  Safari extensions: ⓘ

  AdBlock

  Add to the list of Amazon gift

  Awesome screenshot

  Dashlane

  CLEA. Video Nr

  EverNote Web Clipper

  3rd party preference panes: ⓘ

  Backblaze backup [Support]

  Flash Player [Support]

  Flip4Mac WMV [Support]

  Growl [Support]

  Java [Support]

  MacFUSE [Support]

  For Mac OSX [Support] Seagate dashboard

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 249,20 GB disc used: 74,98 GB

  Destinations:

  Backup drive Seagate Plus [Local]

  Total size: 999,86 GB

  Total number of backups: 6

  An older backup: 10/22/15, 12:25

  Last backup: 19/01/16, 21:00

  Size of backup drive: Excellent

  Backup size GB 999,86 > (disk size 249,20 GB X 3)

  Top of page process CPU: ⓘ

  3% WindowServer

  1% kernel_task

  1% com.apple.WebKit.WebContent (7)

  Download RealPlayer 1% agent

  1% com.dashlane.DashlaneAgent

  Top of page process of memory: ⓘ

  647 MB com.apple.WebKit.WebContent (7)

  572 MB kernel_task

  233 MB mdworker (17)

  Safari of 201 MB

  DashlanePluginService 139 MB

  Virtual memory information: ⓘ

  75 MB of free RAM

  4.18 GB used RAM (903 MB cache)

  192 MB of Swap used

  Diagnostic information: ⓘ

  February 9, 2016, 15:36:32 ~/Library/Logs/DiagnosticReports/findNames_2016-02-09-153632_[redacted].crash

  com.apple.AppleSpell - /System/Library/Services/AppleSpell.service/Contents/MacOS/findNames

  Can you press and hold the button of power may be up to 30 seconds to ensure the

  computer is not simply put to sleep; you want him to stop. Then the attempt to start so he could

  run in safe mode, you can troubleshoot and try to check in the system as suggested:

  • Try safe mode if your Mac does not end commissioning - Apple Support

  Additional links to other content that may be useful to solve problems are included in the above page.

  Another element is Force Quit... it can be used to quit the finder:

  • Force an app to close on your Mac - Apple Support

  You may be able to use keyboard shortcuts in start to see on other actions at startup; as

  attempts to use modes of recovery for other restorative actions, repair permissions, etc. or for

  reinstall OS X again. If you have a backup of your content and also a Time Machine backup.

  There is a good reason to suggest that you could restore the computer to a viable State in front

  These symptoms or problems became so large. The test of original material would be on

  it comes with the installation of restore Apple DVD set than computers. Maybe it's worth a go, too.

  • For Mac - Apple Support startup key combinations

  • With the help of Apple Hardware Test - Apple Support

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • OS X: on OS X Recovery - Apple Support

  {Some newer models may have been updated to use the Internet recovery to restart the computer}

  online system - if the internal drive and its recovery partition missing somehow to any system start-up.

  The model seems to be too old for the Constitution or upgrade to make use of this feature, however...}

  If you have an external drive with a clone of the complete system on board, which could be used to test

  and troubleshooting of the material aspect of the computer; and a source for new offline installation clone.

  Perhaps the 'the etrecheck guy' will examine in this thread and point out some details that I'm not very familiar.

  Good luck in this case!

• RH9: graphics are not displayed, but the fact of the anchored frame

  TCS3/FM10/RH9

  I'm a link FM books to my HR project.  With the help of FrameSLT, conditionalized my graphics (contained in an anchored frame) on FM so that they are not displayed.  It works very well on FM: there is no image and no image is anchored.

  However, in the draft HR charts are displayed with sharps; they appear also with sharps in the preview.  It's the way that it used to be in RH7. In FlashHelp, the graphics do not appear but the anchored frame is left behind, so I have a large white space where the graphic should be.

  I thought that there was a way that you don't have graphics in the project in the first place.  View the graphics in the project really slows down the update and generate processes. Why is HR still collect them if the graphic and anchored framework do not appear in the book of FM?

  Thanks in advance.

  It is about the other 'branch' Settings Conversion settings. The field is called 'Apply FrameMaker building conditional Expression' - check a blog by Matt Sullivan on Roundpeg on its use (http://blogs.roundpeg.com/2010/06/tcs-tips-for-conditional-text/) post

• Color change in the exported sequence (Premiere Pro)

  Short description: colors in exported from first and downloaded movies on YouTube do not match the colors of the source that were imported in the firstimages.

  
  

  Background: I use tool of digital color meter from Apple to read the colors on my poster and Apple Preview to display image (PNG) files.  To eliminate the effect of color profiles, I put my 'Generic RGB profile' poster (which, as far as I know, does not change the R:G:B values).

  Description: I made a sample consisting of a single color animation and exported an image as image file.  Such color as displayed in my animation software, that's what I've specified (R:G:B): 255:0:255, as it is in the exported image as seen in Premiere Pro.  However, if I export a MOV file in Premiere Pro, upload that file to YouTube and play, the color is: 251:0:254.  Also, if I open the MOV file in QuickTime Player and export an image, the color in this context is 251:0:254.

  Question: what causes this color change, and how can I eliminate it?

  
  

  N.B.: This isn't 'gamma changeQuickTime Player' (at length elsewhere).  The color as read in QuickTime Player is 242:13:207 - a large and easily visible difference and who does not appear in other players MOV (ex: Player Flip).

  I JUST DISCOVERED SOMETHING!

  I was testing my single color sample. MOV file on different browsers, and I noticed that he had a slight color change between when YouTube first loaded (Chrome browser) video and when he played.  When I stopped it at the first point loading and read the value of the color, is 255:0:255 - just what I wanted.

  I now believe that the video I'm generating is correct and YouTube does not alter the video as part of the Uploader, but it changes in reading it.

  So, I'm done.

• Some graphics are missing out on all the websites, Google menu text only

  First Google Chrome works perfectly. The problem is with IE and Firefox. The Google.com homepage has an additional menu at the top and it is totally the text, but more importantly, on most Web sites, only some of the graphs show. (IE Flash). It's worse in Gmail where everything is text only. And NO, I have not enabled on these Visual deficient settings. I have reset the settings in the two browsers bad and even downloaded a new copy of Firefox. Same thing happens in IE and Firefox, while Chrome is normal. He set last week, I don't remember what I did. But, after my weekly re-booting, it's baaack. Very frustrating. A lot of suggestions tried for 2 hours now. ... Help my navigation is paralyzed.

  Are you sure that you have not activated Windows high contrast because it happens is IE as well?

  The screenshot is in line with what to expect when web pages look like this (without colors and tables see the lined border cell).

  I don't know if Google Chrome respect this setting in Windows.

  • http://Windows.Microsoft.com/en-us/Windows7/make-the-computer-easier-to-see-optimize-visual-display
  • http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor
  • http://Windows.Microsoft.com/en-us/Windows7/turn-on-high-contrast

• Some songs are not uploaded to the iPhone, even if they are in my ipad

  Hello!

  Some songs downloaded on my iPhone are grayed out and cannot be read, even if they are perfectly fine in my iPad.

  Do you have an explanation for that?

  Thank you!

  He suggested that the files have not been correctly transferred to the device.

  The following steps should resolve things assuming that all of the content you want in your library.

  (If it is not see recover your iTunes from your iPod or an iOS device).

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  NB. A feature introduced with iOS 9 called thinning or slicing app app allows each device to download just the code and resources required by this device, resulting in smaller downloads and a better use of the storage on the device. Therefore the device is no longer the universal version of the application that can be installed on any device to transfer applications is no longer supported. You can however download past purchases to iTunes and/or to activate Automatic app downloads buy to make sure iTunes has always the apps you want on your device. Another change to the way the restorations are implemented means that all private data app is restored and apps that are not in the library are waiting for download on the iTunes Store on Wi - Fi, in a similar way to the restoration of the iCloud way works. Not having apps in your library is not the disadvantage that it once was, but you're still at risk of losing a favored app if it is removed from the Bank and you don't have a local copy.

  TT2

• pictures and graphics are not displayed to the top

  I visited several sites and seen this problem. Some appear and others do not appear, even after right-clicking and then clicking see photo. Any suggestions? I don't know if it's the browser or the computer itself.

  Hello

  1. what application you use to display the image?

  2. what web browser do you use?

  3. doesn't this problem occurs with the particular application or other applications?

  Additional information on the issue to help you further.

  I would also update the graphics drivers from the computer manufacturing and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are using Internet explorer,.

  I suggest to follow the link and check.

  Images are not displayed on Web sites in Internet Explorer

  http://support.Microsoft.com/kb/283807

• Distortion of the export

  I have a distortion on a video with a fast path areas. (The topic is wisking eggs) I have not noticed a problem in previous projects, so I don't know what setting is wrong / different.

  CS6 using, Windows 7.

  Something stand out?

  

  Thank you

  Jason

  " If I change the IRON to 1.0, he adds black bars " "

  It's because you always use 1280 x 960 - incorrect image size. Export in 720 p, which is 1280 x 720, with 1.0 point forget that the source is anamorphic, wanting to get away for the delivery.

  Use the Vimeo 1080 p 29.97 preset to export to Facebook, works very well. Or if you want 720 p, use Vimeo 720 p 29.97 preset. However, when you watch the video on Facebook, always remember to click on the "HD" button at the bottom of the player, otherwise he will play a lower quality version.

  I shoot HDV 1440 x 1080, but export like 1920 x 1080 with 1.0 BY and it seems perfect.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• I deleted the history in the "Library/history" window, but the pages are still visible from the menu "history/restore closed tabs" item in Firefox 29, even if I restart.

  In previous versions, when I deleted a page in the window (separated) from "Library of history", it was no longer visible from the history options. Now, I delete a record in the (separate) window "/ the history of the library" and always visible element of menu 'story/restore closed tabs '. It is essential for me, because I share the same book with my two colleagues. Thank you very much for your answers in advance.

  There are much easier and more suitable methods.

  • Do not let other people use your operating system account.
    Create one regular account for others to use. (Some guests accounts were badly aligned or inconvenient problems.)
  • Create a separate Firefox profile
    If you use the same OS account and then configure at least one additional profile for others to use.
    • Use the Profile Manager to create and delete profiles Firefox
  • Use a private browsing window, and therefore do not save anything.
    • Private Browsing - use Firefox without saving history

• Is it possible to configure Firefox for some cookies are stored even when the Tools/Options/Privacy is confirgured delete all cookies when Firefox is closed? In other words, an 'exception' list so that certain specified cookies would not be remo

  For some sites that I visit on a daily basis, it's a pain to have to sign in each time. (e.g., Zap2it, which provides TV listings in your area). However, I like defining the Tools/Options/life private to keep all cookies until I close Firefox. I wish I could set up Firefox so that all witnesses would be removed EXCEPT those to which I have. If I could do this, I don't have to log in each time.

  You cannot use Delete browsing, search and download history on Firefox if you want to keep specific cookies by setting an exception.
  "Clear recent history" is all or nothing.

  You can leave the cookies expire if you close Firefox if you need to keep specific cookies.
  Tools > Options > privacy > Cookies: "Keep until the": "closing of Firefox".

  See also Cookies - Information that Web sites store on your computer

• Fleeing from a host on the PIX 520 but alerts that are still coming to the IDS

  Last week I saw allot of traffic from a particular host that triggers alerts IDS. After investigating the source, I added a statement SHUN to the pix. When I do a 'sho shun stat' of the NTC for this host is quite high (352) and rises. I still get alerts of the IDS on this particular host (Fragment IP and host sweeps). I guess if I was fleeing from an IP address, I don't receive alerts of IDS on that. Can someone explain what I am doing wrong? Thanks in advance.

  Seems obvious, but can't hurt to ask - where the sniff of your sensor interface? Of course, if your sniffing interface is located outside the pix, then junk traffic will always reach the pix - it just won't be through it.

  In addition, are fleeing this host for these alarms? Doing a show 'show shun' that host being blocked FOR the time you see alerts for this particular host?

  Jeff

• some keys are not working on the keyboard.

  Original title:

  Keyboard problem?

  Hello

  I got a laptop HP with windows 7, I removed the hardrive and put it directly into another laptop. All except 3 or 4 keys on the most recent work. I think it's because they are different models, how can I reset the settings or drivers for the keyboard?

  Thank you!

  Hello Castingman,

  Please keep us updated on the status of the issue.

  However, before I would need some information to help you best.

  1. What is the brand and model of the keyboard?

  2. the problem occurs with another keyboard?

  I suggest you try the following methods:

  Method 1:

  Try to use this keyboard on another computer and see if the problem exists. This will help determine if the problem is the keyboard or computer.

  If the problem disappears with another keyboard and occurs on the other computer with the keyboard, so the keyboard is defective and must be replaced.  If the new keyboard also has the same problem, then it's probably something with the computer and not the keyboard.

  Method 2:

  Log on to the computer manufacturer website and update the latest chipset drivers and other updates to the device driver.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Some pages are not loading after the last update v39.

  After the updated 07/07, pages many (but not all) which worked well previously are now time and need to be recharged to load (for the first time, somehow). Started by clearing cache, then checked for malware and ended by reinstalling Firefox. I copied my profile, rather than starting from scratch with extensions (about 5 only execution).

  All of these problematic pages open correctly in Internet Explorer.

  Any ideas? Thank you very much.

  As test, please disable McAfee. It caused problems.