SonicWALL VPN SRA 1600, impossible to use bookmarks
I'm trying to understand what is wrong with our VPN SRA 1600 device. When you use the netextender application, everything works fine. Connect no problem and have access to everything on the field is great.
When you try to use the bookmarks is where the shoe pinches. When you click on a bookmark for the terminal server, I get the following error:
If I use activex or java is not serious, he also any server, I'm trying to connect to.
I'm not sure where the rub, is there something wrong with the installation of VPN, is he an SDR issue, is there something else? All the stuff I've done research on this issue has not helped.
Thank you
I am pleased that the HTML5 solution works for you.
Its much simpler and less constraints than the Active X or Java favorite operating system/browser.
Tags: Dell Tech
Similar Questions
-
It is impossible to make bookmarks
It is impossible to make bookmarks.
-
Impossible to use the box of favorites - a pop up appears saying unavailable location
original title: IMPOSSIBLE to USE THE FAVORITES BOX-APOP-UP to POSTER SAYING LOCATION NOT AVAILABLE
Whenever I try to use the box of Favorites (top-right), I can use the tabs 'RSS' and 'History', but not the "Favorites". Instead, I get a message saying: 'not available place '. Can someone out there help, please.
Edward Baker
Hello
I suggest try to reset Internet Explorer and check to see if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings
It will be useful.
-
When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet. I have a VPN connection and it works but not navigation parallel to the point where the VPN works.
Someone suggested this fix >
Make sure that the default route has NOT changed to the VPN server.
Open the properties of your VPN connection.
Go to 'network '. Double click on TCP/IP protocol. Use the button "Advanced".
Disable the feature from default gateway.
but when I do that so I'm not able to access our data HTML site that requires the use of VPN.
Any help is appreciated
This article describes what you see...
http://TechNet.Microsoft.com/en-us/library/bb878117.aspx
.. .and possible solutions...
I suggest you post this question in the TechNet Windows 7 IT Pro networking forum can help...
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
-
Not HAPPY WITH PHOTOSHOP use to love this software until they have done it is impossible to use with the newer Windows & Mac
I have 12 items, 7 PS, 6 PS and PS 4.0 (which would always be my first choice), but most are useless, why can't they be used with the new Windows or Mac?
I am very disappointed by this company and would "Never" sugest someone uses as his then we face, Ive given my Adobe software because I wasn't able to use it on my Mac, which is hundreds of dollars WASTED! I pick up an another 4.0 'if' it was compatible with anything used today but its looking more like Adobe has become consumed with greed and not customer satisfaction! It seems to be a loyal to the company's product is a thing of the PAST 'Thank YOU' but 'no. THANKS ADOBE SMH.
No one forced to use a Mac that is not compatible with the old software... the problem is written Mac to new operating systems that will not old programs to run
Windows did the same thing... I had to give up a Microsoft Office 97 perfectly fine when I moved from WinXP to Win7
If you want to use the old software, you must use an old operating system
-
I just put cc2014 photoshop and illustrator on my new lenovo yoga 2 pro, illustrator is great, all the menus are big enough to use but in photoshop, everything is so small its almost impossible to use. can someone tell me if a fix for who or why its doing just in photoshop
Go to the Photoshop preferences > experimental features > scale IU 200%
I don't know if has Illustrator of the same function, but you can view this forum.
Note: If this answers your question, please mark as answer.
-
You can create a table of contents with page numbers using bookmarks?
You can create a table of contents with page numbers using bookmarks?
Sometimes a long article has bookmarks to help navigate, it but has no real TOC (table of contents) on the first page. In such a situation, I think that it would facilitate the reading of the paper version if you can somehow create a table of contents with page based on hierarchical bookmarks in the document numbers.
If this is not possible from Acrobat, is there a third party app?
Indeed you have created a script for this - sorry that I missed it. I should have...
Acrobat - Create TOC bookmarks
-
Adobe community help app is so slow that it is impossible to use.
Just in case you didn't know.
Hi Leshes: the engineering support team just released a new version, 3.3, which is described here: http://forums.adobe.com/thread/707280. Great emphasis on this last version has been performance - in fact, for research on the Flex and Flash (which have the extra ASLR and code search results), the results are now returned 250% faster.
In addition, AIR2/Flex 4 migration should improve responsiveness overall app. Hope you give an another shot if you are ready...
Post edited by: Mark Nichoson; fixed the URL to the right forum thread.
-
Determine the IP address assigned to the laptop using SONICWALL VPN to connect to the network
Hello
How can I determine assigned by DHCP IP address internal LAP assigned to a laptop computer after that it connects to our network. We use the client VPN Sonicwall.
For example, our model of IP network is 10.11.12.x. I guess that any VPN client PC Gets a 10.11.12.x address once the connection is established.
Thank you!
Click Start (or press the Windows key) and type cmd , and then press Ctrl_Shift + enter together. This will launch a prompt with high privileges. Acknowledge the UAC warning and provide credentials if necessary. Once you have the command prompt window use this command at the command prompt.
IPCONFIG/ALL
If you don't have administrator access on your computer, use cmd with just Enter and this simple command at the prompt window.
IPCONFIG
You get your address IP LAN, just not all the information available.
-
Impossible, drag a bookmark to horizontal bookmarksbar (space under the address bar)
In FF 18.0.2 there are 4 bars I can activate for use, by putting a tick in the respective option: 'menu, navigationbar, bookmarksbar, addonsbar bar. (I hope you don't mind the wrongspellings, I have FF in finninsh) When I check "bookmarksbar", it creates a horizontal blank space below the address bar. Isn't this space to quickly open frequently used pages, without the vertical bookmarsbar? Now, it seems that it is impossible to drag any bookmark to it addresses or the vertical bookmarksbar bar. There must be a reason for this horizontal blank space, but how do I use it? Or have I misunderstood this? I have searched for the solution, but have yet to see any question about it. A lot of other things about bookmarks, but not only this one. Or other person, except me, care about this thing, or so it works in other machines. Any help appreciated!
Go to firefox > bookmarks (or press ctrl + shift + B) to open the library. Here you can move bookmarks of the bookmarks toolbar in the Bookmarks menu or unsorted bookmarks (simply by dragging and dropping them in a different location).
-
Hello guys. I need to do it quickly for a customer. They have the following topology. Not real Ip addresses but it's their configuration.
http://i.imgur.com/lFSTBeV.jpg?1
Basically, they have this race. So what I have to do?
Well now if the MPLS link fails. They need to change it manually to the VPN. So I need to find a solution to the socket on the MPLS VPN after a failure.
I read this Sonicwall KB.
https://support.software.Dell.com/kb/sw8445
I think is what I need. However I do not understand something. In this step you create a traffic from track to track static to the target of the probe. (Network > routing). I don't see where they create the VPN static route. They create the road MPLS but where is the 'static route Floating' they missed a step? Part weirdst in this article, is that the backup VPN is a policy based. I can't change the metric in this type of VPN. I missed something?
My other idea was to OSPF configuration, but let me know which is the best solution?
Thank you
OK, placing the tunnel VPN site to site "tunnel interface" mode will allow you to create a route for the VPN traffic.
This will give you 2 routes created manually, one for MPLS one for the VPN.
You can then use probes to disable MPLS route when the probe fails causing the VPN route to support until the SPLM is back.
Kevin
-
SonicWall VPN PIX - does not, could someone help?
Hi all
I'm trying to set up an a 506th PIX VPN tunnel (firmware 6.3 (2)), a firewall SonicWall Pro. It does not at the moment. Phase 1 is ok but the phase 2 is not, the VPN tunnel has not been established, and the security association is removed after a minute or two. I enclose below the PIX config and an attempt to create VPN tunnel debugging output (slightly modified and cut for reasons of confidentiality). The PIX already has other two VPN configured which work perfectly.
I would be very grateful to anyone who could help me answer the following questions about this VPN configuration:
1. to debug output, which means the next?
ISAKMP (0): retransmission of the phase 2 (0/0)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
2. in the config, I don't know if the 3 static controls are necessary and how it might interact... What do you think?
3. in what order things happen in the PIX when traffic is from the local network to remote network by VPN? What is NAT then treatment then setting up VPN to access list? or or treatment, then NAT and VPN to access list? or another possibility?
4. How can I get it work?
Thank you very much in advance for any help provided,
A.G.
########### NAMING #################################
vpnpix1 - is the local cisco PIX
remotevpnpeer - is the Sonicwall firewall remote
Intranet - is the local network behind PIX
remotevpnLAN - is the remote network behind the SonicWall
################ CONFIG #############################
6.3 (2) version PIX
interface ethernet0 10full
interface ethernet1 10full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
.../...
hostname vpnpix1
.../...
names of
name A.B.C.D vpnpix1-e1
name X.Y.Z.T vpnpix1-e0
name E.F.G.H defaultgw
intranet name 10.0.0.0
name 192.168.250.0 nat-intranet
name J.K.L.M internetgw
name 10.M.N.P server1
name Server2 10.M.N.Q
name 10.M.N.R server3
name 192.168.252.0 remotevpnLAN
name 10.1.71.0 nat-remotevpnLAN
.../...
object-group network server-group
description servers used by conencted to users remote LAN through a VPN tunnel
network-host server1 object
host Server2 network-object
network-host server3 object
.../...
access allowed INCOMING tcp nat-remotevpnLAN 255.255.255.0 list object-group server-eq - ica citrix
.../...
OUTBOUND ip intranet 255.0.0.0 allowed access list nat-remotevpnLAN 255.255.255.0
access list permits INTRANET-to-remotevpnLAN-VPN ip intranet 255.0.0.0 255.255.255.0 remotevpnLAN
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 nat-remotevpnLAN
.../...
IP address outside the vpnpix1-e0 255.255.255.240
IP address inside the vpnpix1-e1 255.255.252.0
.../...
Global 192.168.250.1 1 (outside)
NAT (inside) 0 access-list SHEEP-to-remotevpnLAN
NAT (inside) 1 intranet 255.0.0.0 0 0
.../...
static (inside, outside) server1 server1 netmask 255.255.255.255 0 0
public static server2 (indoor, outdoor) server2 netmask 255.255.255.255 0 0
public static server3 (indoor, outdoor) server3 netmask 255.255.255.255 0 0
static (exterior, Interior) nat-remotevpnLAN remotevpnLAN netmask 255.255.255.0 0 0
.../...
Access-group ENTERING into the interface outside
Access-group OUTGOING in the interface inside
Route outside 0.0.0.0 0.0.0.0 internetgw 1
Route inside the intranet 255.0.0.0 defaultgw 1
.../...
Permitted connection ipsec sysopt
.../...
Crypto ipsec transform-set esp-3des esp-md5-hmac VPN - TS1
.../...
map BusinessPartners 30 ipsec-isakmp crypto
card crypto BusinessPartners 30 matches the INTRANET-to-remotevpnLAN-VPN address
card crypto BusinessPartners 30 set peer remotevpnpeer
card crypto BusinessPartners 30 game of transformation-VPN-TS1
BusinessPartners outside crypto map interface
ISAKMP allows outside
.../...
ISAKMP key * address remotevpnpeer netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 28800
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 chopping sha
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 28800
part of pre authentication ISAKMP policy 30
ISAKMP policy 30 3des encryption
ISAKMP policy 30 md5 hash
30 1 ISAKMP policy group
ISAKMP duration strategy of life 30 28800
.../...
: end
################## DEBUG ############################
vpnpix1 # debug crypto isakmp
vpnpix1 #.
ISAKMP (0): early changes of Main Mode
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): treatment ITS payload. Message ID = 0
ISAKMP (0): audit ISAKMP transform 1 against the policy of priority 10
ISAKMP: 3DES-CBC encryption
ISAKMP: MD5 hash
ISAKMP: default group 2
ISAKMP: preshared auth
ISAKMP: type of life in seconds
ISAKMP: duration of life (basic) of 28800
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0
ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): ID payload
next payload: 8
type: 1
Protocol: 17
Port: 500
Length: 8
ISAKMP (0): the total payload length: 12
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
Exchange OAK_MM
ISAKMP (0): processing ID payload. Message ID = 0
ISAKMP (0): HASH payload processing. Message ID = 0
ISAKMP (0): SA has been authenticated.
ISAKMP (0): start Quick Mode Exchange, M - ID - 1346336108:afc08a94
to return to the State is IKMP_NO_ERROR
ISAKMP (0): send to notify INITIAL_CONTACT
ISAKMP (0): sending message 24578 NOTIFY 1 protocol
Peer VPN: ISAKMP: approved new addition: ip:remotevpnpeer / 500 Total VPN peer: 3
Peer VPN: ISAKMP: Peer ip:remotevpnpeer / 500 Ref cnt incremented: 1 Total VPN peer: 3
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP (0): processing NOTIFY payload Protocol 14 1
SPI 0, message ID = 476084314
to return to the State is IKMP_NO_ERR_NO_TRANS
ISAKMP (0): retransmission of the phase 2 (0/0)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): start Quick Mode Exchange, M - ID 1919346690:7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (1: 1)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (0/2)... mess_id 0x7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (2/3)... mess_id 0xafc08a94
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): retransmission of the phase 2 (1/4)... mess_id 0x7266e802
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: error msg not encrypted
ISAKMP (0): start Quick Mode Exchange, M - ID - 1475513565:a80d7323
ISAKMP (0): delete SA: CBC vpnpix1-e0, dst remotevpnpeer
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: drop msg deleted his
ISADB: Reaper checking HIS 0x10ff1ac, id_conn = 0 DELETE IT!
Peer VPN: ISAKMP: Peer ip:remotevpnpeer / 500 Ref cnt decremented for: 0 Total of VPN peer: 3
Peer VPN: ISAKMP: deleted peer: ip:remotevpnpeer / 500 Total VPN peers: 2
ISADB: Reaper checking HIS 0 x 1100984, id_conn = 0
ISADB: Reaper checking HIS 0x10fcddc, id_conn = 0
crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500
ISAKMP: its not located for ike msg
#####################################################
Get rid of:
static (exterior, Interior) nat-remotevpnLAN remotevpnLAN netmask 255.255.255.0 0 0
You don't need it. Change:
OUTBOUND ip intranet 255.0.0.0 allowed access list nat-remotevpnLAN 255.255.255.0
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 nat-remotevpnLAN
TO:
access list permits OUTGOING ip intranet 255.0.0.0 255.255.255.0 remotevpnLAN
access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 remotevpnLAN
This indicates the PIX not NAT IPSec traffic. NAT happens BEFORE IPSec in the PIX, so if you the traffic IPSec nat it will never match your crypto access list and will not be encrypted.
This, however, should not stop the tunnel of Phase 2 of the course of construction, they would stop flowing above the tunnel, traffic, so you still have a problem somewhere. What I'm guessing, is that the Sonicwall (SW) has a different encryption-defined list access, it must be the EXACT OPPOSITE of what is configured on the PIX. In other words, the SW should be encrypting the traffic of "remotevpnLAN-24" "intranet/8", make sure that the subnet mask ar ETHE same too. "
To answer your questions:
1. it simply means that the PIX has not received a response and is to retransmit the last ISAKMP packet. The process_block simply means that the PIX has dropped a package that was to be encrypted because the IPSec tunnel has not been built. If you get the tunnel built, these messages will disappear.
2. the 3 first static does not appear to be linked to the tunnel IPSec, if they are simply to access a server inside, then they will not affect this VPN tunnel. The last of them should be deleted, as I already said.
3. for traffic initiated from inside the PIX, the order is incoming ACL, then NAT, IPSec processing. That's why your OUTGOING ACL must allow traffic first, then your NAT 0 statement refuses to be NAT had, then the encryption function is the traffic and the number.
4 do what I said above :-)
If you still have no luck, re - run debugs, but initiate traffic behind the Sonicwall, in this way the Sonicwall will try and debug of build that the tunnel and you will get more information on the PIX. Mainly, we'll see what traffic model the SonicWall is configured to encrypt (you don't see if the PIX initiates the tunnel).
-
ASA5510 + Sonicwall VPN site-to site does not
We tried to connect VPN of Sonicwall PRO2040 to an ASA5510 without success. I get the following errors on the ASA:
/ * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}
where x.x.x.x is the IP address of the Sonicwall, y.y.y.y is the ASA
6 March 19, 2010 15:44:06 302015 x.x.x.x y.y.y.y 500 500 built inbound connection UDP 48318039 for outside:x.x.x.x/500 (x.x.x.x 500) at identity:y.y.y.y/500 (y.y.y.y 500)
4 March 19, 2010 15:44:29 713903 IP = x.x.x.x, Invalid Cookie message received on HIS non-existent
4 March 19, 2010 15:44:29 113019 group = x.x.x.x, Username = x.x.x.x, IP = x.x.x.x, disconnected Session. Session type: IKE, duration: 0 h: 00 m: 23s, xmt bytes: 0, RRs bytes: 0, right: Service lost
3, 19 March 2010 15:44:29 713123 group = x.x.x.x, IP = x.x.x.x, IKE has lost contact with the remote peer, removal of connection (type keepalive: DPD)
4 March 19, 2010 15:44:27 group 713903 = x.x.x.x, IP = x.x.x.x, treatment of the Information Exchange has failed
5 March 19, 2010 15:44:27 group 713904 = x.x.x.x, IP = x.x.x.x, received a unencrypted INVALID_COOKIE notify message, drop
4 March 19, 2010 15:44:25 group 713903 = x.x.x.x, IP = x.x.x.x, treatment of the Information Exchange has failed
5 March 19, 2010 15:44:25 713904 = x.x.x.x, IP = x.x.x.x group, received a unencrypted INVALID_COOKIE notify message, drop
4 March 19, 2010 15:44:23 group 713903 = x.x.x.x, IP = x.x.x.x, treatment of the Information Exchange has failed
5 March 19, 2010 15:44:23 group 713904 = x.x.x.x, IP = x.x.x.x, received a unencrypted INVALID_COOKIE notify message, drop
5 March 19, 2010 15:44:06 group 713068 = x.x.x.x, IP = x.x.x.x, no routine received Notify message: info ID not valid (18)
5 March 19, 2010 15:44:06 group 713119 = x.x.x.x, IP = x.x.x.x, PHASE 1 COMPLETED
6 March 19, 2010 15:44:06 113009 AAA retrieved by default group policy (DfltGrpPolicy) to the user = x.x.x.x
6 March 19, 2010 15:44:06 302015 x.x.x.x y.y.y.y 500 500 built connection UDP incoming 48318039 for outside:x.x.x.x/500 (x.x.x.x/500) to the identity: y.y.y.y 500 (500 y.y.y.y)
and here's the conf on the ASA:
/ * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map 2 match address outside_cryptomap
card crypto outside_map 2 peers set x.x.x.x
card crypto outside_map 2 game of transformation-ESP-AES-256-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
ISAKMP crypto identity hostname
crypto ISAKMP allow outside
crypto ISAKMP allow inside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared-key *.
!
Can anyone help please? We checked on the Sonicwall and it seems that everything is appropriate.
As you use the ip address, you must configure "isakmp crypto identity address" instead of "crypto isakmp identity hostname.
Please share debug output while trying to establish VPN:
-debug crypto isakmp
-debug crypto ipsec
See also, the exit after:
-show crypto isa his
-show crypto ipsec his
If you can share the ASA configuration that would be great. Thank you.
-
Impossible to use synchronization
Very confused trying to tap sync. I have two laptops and want to keep the same bookmarks between them. Just don't see how works with synchronization. How one "keep" bookmarks on every computer? If I add a bookmark to A computer; exactly what are the steps to get the extra bookmark on computer B? If I add a bookmark to computer B; How to be on computer A? If I use A computer for a long period of time and add several bookmarks how do I "update" computer B? etc etc etc. I don't see the process. The most appreciated assistance. Old business dealing with dog new tricks syndrome here.
To keep the structures in separate folders of bookmarks on the two devices are connected to a sync account, uncheck the option to Bookmark Sync in all: preferences #sync
It will merge the two no matter how its organized.
-
I do like Firefox because I spent the last 20 minutes, just trying to report so that I can get to favorite and history which does not include the 20 minutes, I go through FAQ I don't care about the old sync number that I use to have, and I don't care if I get a new number from the sink , but I want to be able to use all of the features in Firefox, why would you not add these things to Firefox so that everyone can use and then decide to add something to it and see if they want to not a mandatory thing to hunt for more than an hour trying to figure how to do it just so you can get the basic features of the normal web browser
If you want to use Firefox Sync to synchronize bookmarks between your different devices, but have not ever used? How can I set up Sync on my computer? can help
Maybe you are looking for
-
The function first HP app show
I have a 'bad arguments number' which appears when I try to access a function. I entered (x ^ 2 + 8 x + 16). I'm not familiar with this new calculator and will have a hard time trying to figure out some errors i'm coming up against. Any help would b
-
I print the façade of a of my subVIs to the default printer by setting "Properties"->"PrintOptions"-> "_ Auto print Panel. If I want to send the same façade in a new file on the computer so that he could later be printed where the printer does not wo
-
Pavillian Dv7-3085dx: memory upgrade
I have Dv7-3085dx with intel 1.6 Ghz processor. The manual indicates memory max is 8 GB, but I noticed in several of the questions forum upgrades memory 16 GB is possible. Which also apply to my model? Thank you
-
all my emails will automatically return as whole?
My laptop is a system for family use. I have email accts that separate accounts and family personal all these accts as whole accts family will automatically return revealing and personal accts / professional? Or is the system one pick-and-choose wh
-
Photosmart C4280 print queue do not; scanner works fine
I had seizures with this ugly printer. I had it on 2 yreas, and it is not worth to get a service. First of all, he gave me grief on the ink cartridges that had been installed and work for awhile, but have been used regularly. Followed all of the su