Sony 4 k current buyers and future is it seems OK for you

Similar Questions

• How to display the current page and the total number of pages for a group

  Hi all
  I have a requirement to indicate the current page number and the total number of pages for a group. For example:
  
  < A >
  < 1 >
  Row1
  row2
  ....
  Clotilde
  < / 1 >
  < 2 >
  Row1
  row2
  ....
  Clotilde
  < / 2 >
  < 3 >
  Row1
  row2
  ....
  Clotilde
  < / 3 >
  < /A >
  
  Now my requirement is Group 1 can have lines going into several pages say x, so I need to show with in the Group 1 x and on the next page page 1 page 2 x etc.
  Although Group 2 spans several pages, I need to see page 1 of y... etc.
  
  Can someone help me please how to do this?
  
  
  Thank you
  Sunny

  Try if@section

• Connection to the single local: NONE of your solutions have worked, and I'm not paying $ 50 for you to continue to doesn't solve is not my problem...

  I tried all of your "solutions" including regedit, I tried to disable internet protocol version 6 or w/e and none of this even came close to work. I NEED internet to do school work, on a laptop, but your software is blocking me completely to do this... I don't have $ 50 to spend on sit on the line with someone who will not solve my problem, and I don't have the money to spend on an another crap software update...

  FIX my problem of fools.

  Hi mane83triple

  Could you tell me something more about your problem? I understand that you can not connect to the Internet. Can you give me more information about all the steps you tried? And the exact error you are getting?

  Try these:

  Step 1: R of the United Nations, the Network Diagnostics tool.

  To make this problem troubleshooting, please follow the steps below.

  (a), click on Start > Control Panel.

  (b) click network and Internet, click network and sharing Center.

  (c) under network and sharing Center, click on solve the problem.

  Disable the firewall\security software that is installed on the computer and check for the issue.
  Note: Enable security software \firewall once the test is done.
   
  Step 2: Also reset TCP\IP.

  You can also go to these links that talk about Internet connection issues:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://support.Microsoft.com/kb/930517

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Also visit the sites that talk about problems similar to yours:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/0adb02c7-2b46-4754-AEAF-265a32f6cd62

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/739a9733-5dfc-4263-9BF6-df0cbfb6f08e

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/0949042d-074e-43ab-ba95-3c06cc2aa6be

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/dbdc73e2-d5b1-4BA4-AA2F-218ce2d24c6e

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• :( Your PC run into a problem and must restart. We just collect some eror info and then we will restart it for you.

  It will show a blue screen... and also see the error: DRIVER (tcpip.sys) _IRQL_NOT_LESS_OR_LESS_OR_EQUAL
  can I know what is... I hope that you will help me solve this problem... TQ

  

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici 
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  
  
  Co-written by JMH3143
  Team Zigzag3143.com  

• Select the year, current and future year

  Hello world
  I have the select statement where I want to put the current year and the following year like this: 2011-2012
  That's what I have so far, but I do not know how to bring the other party.
  I added a when-validate-point trigger and put the following inside:
  BEGIN
  SELECT (TO_CHAR (SYSDATE, 'YYYY') |) » -'|| TO_CHAR(SYSDATE,'YYYY+1')) IN: SCHOOL_YEAR
  FROM DUAL;
  END;
  
  Gives me an error on the second tank. Can someone help me on this please?

  Mayen something like this:

  SELECT EXTRACT(YEAR FROM sysdate), EXTRACT(YEAR FROM add_months(sysdate,12)) from dual
  

  François

• How can I obtain and load the service pack 2 for my sony vaio 2000

  How can I obtain and load the service pack 2 for my Sony Vaio 2000 (model year) that I need it to have

  installation of some software.

  Rex

  I suggest to download the full Windows XP Service Pack 3 (not 2) and copy to a CD for future use, here http://www.microsoft.com/download/en/details.aspx?id=24

• The referenced account is currently locked and cannot be logged on to. How to unlock it?

  This is the error I get when I enter the correct password also. I have Windows VISTA and I have a set a local policy for the account lockout threshold. My friend wanted to break my password without knowing it. It is not a domain account. Mine is an independent home PC. There is a single account that is my account. I tried in safe mode (even with the command line too), but even then I get the login screen & tell me to enter the password. If I enter the password, it says "the referenced account is currently locked and cannot be saved in. There is no fingerprint reader in mine either. So how I now access my account & see my Office I couldn't since 4 days now! Suggestions, please WELCOME!

  Next time consider that to have a friend who does not really know what there mess in this connection with your computer isn't a good thing. Nor is defining an account lockout policy without knowing what you do or creating an additional administrative account so hot either.

  The faster and easier to solve this problem is to enable (disabled by default) built-in Administrator account and set a null (blank) password. Allowing this account will put an icon for it on the logon screen so that you can then you connect, make an emergency administrator account (call it something like 'CompAdmin' or 'Tech' or other), change the passwords of other accounts, etc.. When you are finished, log on the built-in Administrator and in the "CompAdmin" account and disable the administrator built-in again if you want this additional security (recommended). Leave the account "CompAdmin" rise and future emergency situations given that the account for your daily work must be a Standard account. See the end of this post for general information on configuring user accounts in Vista.

  http://home.eunet.no/~pnordahl/ntpasswd/

  Download CD (.iso) image and burn as an image, not as data. You will need a third party burning software. Then boot with the CD that you created and follow the directions.

  Once all of your changes, on the account of CompAdmin disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  General information of user accounts *.

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  ***

  Doing this requires a certain level of computer skills. You know better and if taking the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best course of action.
  MS - MVP - Elephant Boy computers - don't panic!

• Sony Bravia 55 '' goes off and lights repeatedly

  Hello

  I'm sure this has been asked and answered many times, but I thought would like to ask once again accelerate things.

  We have a Bravia KDL-55HX800 is only 3 years old 55 "and out of nowhere, he began to turn power off and back on.   Even if you switch off and the light is red, you can still hear a relay or something cycling power on and off when the unit is plugged.

  Do a Google search that I realized this thing similar happened to MANY owners of products Sony and Im very disappointed, because we paid $ 1500 for this TV and couldve bought a Walmart cheap set for half the price.  We spent the extra money on Sony because of the reputation.  If I wouldve known my $1500 would have only gotten me 3 years of service I most certainly would have gotten the throw all of Wal-Mart.

  After a bit of reading, I keep seeing on the firmware update and other, as a computer scientist to talk to me I do not see why this changes nothing because all is connected to the same power source and Tivo it has been connected since brand new.  No change in the material either.    Only now, the game has a problem.  A problem. apparently a lot of people were undergoing.

  If I had to guess, Im as the answer to all this is Im just out of luck, good luck finding a technician who can fix this flawed TV set.   (I look at places in the Service Center authorized Sony by my zip code, but they all have horrible comments/reviews by previous guests) But Im hoping that since he is in fact a Sony Forum they can explain a repair and why their product worked only 3 years?   We can expect future elements of Sony?  And finally, why a person never would pay the huge price of Sony again if their product has the life of a disposable product from a big box retailer.

  Television has been disconnected since the beginning of this episode, because even when it was set to OFF with the red light, leave plugged in, you could hear something cycling again and again inside.   That did not sound good at all, so we left it unplugged.

  I did as you asked, no change.

  However, to do a lot of Google searches, that we can on this:

  http://www.ehow.com/how_5855646_reset-Sony-BRAVIA-TV.html

  This has fixed the problem and so far it works normally.     Before he would not stay on for more than 10 seconds before cycling off power, remove and then replace slot, so we were unable to do any update.   (Wasn't enough time to get to the right screen to update) But since doing the procedure from the above link, we went ahead and updated the software also.

  You can recommend this procedure to those who have the same symptom we had.

• After you type the master password in session can force type master password once again without ending the current session and start new session?

  Sometimes after using the password to access an account during a given session of firefox, I want to "repeal" this ability of automatic access (i.e. require type the password again once) without having to put an end to the current session and restart firefox.

  It's nice to only have to type the password once per session, there are times when after launching an action that I would let the browser unattended for a short period but to prevent others to access sensitive information on other sites if they can't my master password. Note that this is not the same thing as "locking the browser. Currently, the only way I know to force it is to kill the session and restart the browser but it's not very satisfying if I really want to stay connected (allowed) to a particular site. I hope that adding a button in the Security tab "requires the master password for the current session" would be a simple solution to implement? Thank you for your attention.

  You can connect from the software security device (e.g. click Cancel in the dialog box display the passwords) to force them to return to the MP once more.

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • Tools > Options > advanced > encryption: Certificates > safety devices: software security device: Logout button

• Why not in the list of countries, the Azerbaijan and the Georgia? I am a citizen of Georgia, but currently working and living in Azerbaijan. The absence of these countries created barriers to e-payment. As I said I have currently in the territory of the A

  Why not in the list of countries, the Azerbaijan and the Georgia? I am a citizen of Georgia, but currently working and living in Azerbaijan. The absence of these countries created barriers to e-payment. As I said, I currently have in the territory of the Azerbaijan can't use Visa and Master Card and also problem with cards issued in Azerbaijan! What is the reason, can you explain?

  Hello

  It is a community of support based on the user, though I'm afraid that nobody here can speak you either the reasons for decisions from Apple or whatever plans unannounced Apple (for example, if and when pay Apple will launch in a given country).

  If you are wanting to see pay Apple throw in Azerbaijan and Georgia, you can let Apple know here:

  https://www.Apple.com/feedback/Apple-pay.html

• Sony KDF-55E2000 turn off and on itself

  I have a Sony KDF-55E2000 who goes out, then back, without any input from me. The power light on the front of the TV flashes green while he's back back, like it normally does when the TV is turned on. No other lights are flashing. Is the power light blinking is not indicative of a problem typical, as indicated in the manual.

  I already contacted Sony support, but was unable to get any useful information (answer: repair). I did a power reset and restored to factory default settings, but that didn't help. What other issues may be the cause of this behavior? I'm comfortable open TV on mine and replacement of parts, as long as I have a small idea of what I should look for.

  I replaced the lamp once since the purchase of the TV. I replaced the lamp in January 2010. Until I replaced the lamp, at the front of the TV lights blinked in the expected color and style specified in the manual. Of course, this was not the case this time. I didn't open the door to the lamp for replacement of the lamp 5 years ago. Other problems potential I can guess are dust build-up causing overheating, one several fans at default, the sensor of the lamp or lamp door sensor is going bad, the pilot/ballast lamp goes wrong, or the lamp itself is bad. The problem is the behavior I see with the power light does not seem to correspond with these problems. Does anyone think any of these potential problems could be past based on the behavior I'm reports? Is there something else that could be and I could look?

  Thank you very much for the help.

  Matt

  Quick update: I bought a new lamp, installed, and everything looks great again. If that didn't work, I wasn't going to get it fixed. It just was not worth it financially. It would have been better to put the money in a new TV. But, we'll see how long I can keep this going with lamps. Thanks for the suggestions of George.

• How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.

  How many people currently work at apple (by country, if possible), I write a business report and need to know the answer, thank you.

  Watch their deposits of the company. This community is to post technical questions.

  We are users like you. We are not Apple. If you wish to contact Apple use the link contact us at the bottom of this page.

• Want to m6: recent installation HP Envy M6 - need to cut the current passes and much more

  I installed Win 10 on my m6 desire.

  However I've ignored the warning of TPG and hope the partitions would be ok.

  They are not.

  While doing this, I set power password - can I use empty to stop using it again?

  Back to the question - did someone knows how, to factory reset hard drive partitions?

  What to do with the F1 - F12 keys at startup do - is there a list?

  I can get to win 10 C command :/ If this is useful?

  Argh - thank you.

  To remove the password to enter the BIOS and change it to use no pw. Enter current pw and leave new pw as empty. Save & Exit.

  Looks like you're going to need to boot up the laptop to restore the factory setting recovery media. If you do not bring your recovery media you can still be able to order from HP.

  If you live in the United States / CA, coordinated HP here.

• The customization cannot be installed because another version is currently installed and cannot be upgraded from this location. __

  Name:

  From: http://localhost/TestUpdatedVersion/TestUpdatedVersion.vsto

  The customization cannot be installed because another version is currently installed and cannot be upgraded from this location. To install this version of the customization, first use Add / Remove programs to uninstall this program: TestUpdatedVersion. Then install the new customization from the following location: http://localhost/TestUpdatedVersion/TestUpdatedVersion.vsto

  The exception text *.

  Microsoft.VisualStudio.Tools.Applications.Deployment.AddInAlreadyInstalledException: The customization cannot be installed because another version is currently installed and cannot be upgraded from this location. To install this version of the customization, first use Add / Remove programs to uninstall this program: TestUpdatedVersion. Then install the new customization from the following location: http://localhost/TestUpdatedVersion/TestUpdatedVersion.vsto

  at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.VerifySolutionCodebaseIsUnchanged (String subscriptionId, Uri uri, Boolean previouslyInstalled)

  at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn)

  You can try to remove a registry key located at the:

  HKEY_CURRENT_USER\Software\Microsoft\VSTA\Solutions\ {GUID}
  The {GUID} value will be different in your environment.
  Make sure that you remove the right key.  Confirm by checking the DWORD value "Url" to the key.
  Restart Excel and you should be good to go.

  http://www.charliedigital.com

• I have a sony vaio with windows xp sp3 ver2000 pro and it cannot find the drivers for anything whether it is pluged in the usb port

  I tried the answer on this page since the windows site and it did not work https://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/usb-plug-and-play-devices-do-not-install-on-xp-pro/ea6c1409-ac48-4c68-8bf4-0800497531ed

  Hello

   

  Welcome to the Microsoft community!

  You cannot use USB devices.

  The problem may occur because of out-of-date firmware or basic input/output system.

  To help you better, we need more information.

  Do you get any error messages?

  To work with the issue I suggest you follow the steps in the site mentioned:

   

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.