Sony DVD on Inspiron 9300

Similar Questions

• Failed to create the recovery on my Satellite A300-29N using Sony DVD disc

  Hello

  Tried to do the recovery disk for Toshiba A300-29N using Sony DVD new, always make a mistake. Toshiba service center confirmed that Sony DVD is not compatible with this DVD player.
  The one facing this problem and any updates. Tried with DVD Imation, it worked fine
  Concerning
  Samir

  I do not use a Sony DVD but TDK or Verbatim DVD-R support. Whenever I used it I was able to create a recovery media. No problem at all.
  I recommend you do the same thing. Believe me, it will not work correctly.

• Drive is not capable of burning (SONY DVD RW DW-D22A)

  Drive is not capable of burning (SONY DVD RW DW-D22A)

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Sony DVD + RW DW-Q58A Drive will not recognize DVD movies

  I've upgraded windows xp to windows 7. I have a Sony DVD + RW DW-Q58A drive.  It works very well for reading, writing etc... But won't recognize DVD.  Bought films or movies burned.  Occasionally, he will recognize an and he is hit and weather it's a bought movie or a film engraved... Help?

  There are 2 lasers in a Dvd Drive, a CD and a DVD. I'm guessing that the DVD laser has gone wrong. This is common with older players like yours.

  You can try to uninstall the IDE channel that the unit is in the Device Manager and reboot, but I doubt it will help.

• Error is 0 x 80131604 missing when message burnig a bluray with Sony DVD architect 5.2

  Original title: error message is missing 80131604 0 x

  This is the message I get when burnig a bluray with Sony DVD architect 5.2, the process of creating my bluray stop when this message appears.

  all solutions? Thank you.

  Hello
   
  I suggest you to consult the section troubleshooting steps and check if it helps.
   
  https://www.custcenter.com/app/answers/detail/A_ID/5044/~/message-missing-error-0x80131604
   
  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  
  I suggest you to contact Sony support site for assistance.
  
  http://eSupport.Sony.com/

• Dimension 9200 put upgraded from Windows XP to Windows 7 and two DVD Rom Sony DVD +-RW AQ160S do not work.

  Recently, I brought in my Dim 9200 desktop purchased in 2006 to have installed Windows 7. When I got home, I thought everything was working fine, but I had not noticed at the time there was only a C drive which stood under 'my computer '. I live in a remote area and I would rather not return the computer at this point to check it out. I get an error code 32 when I go in the Manager of devices for readers. I tried to find new drivers, but windows tells me that they have installed the drivers up to date. I need help on what to do to solve my problem.

  The dvd rom and dvd +-rw were the original disks when purchasing.

  They appear as Sony DVD +-RW AW - AQ160S and HL-DT-ST DVD - rom GDR H10N in my system, if this is useful.

  The drivers, see the system32\drivers\cdrom.sys for the DVD-ROM and the driver shows that windows\system32\drivers\PxHIpa64.sys Sony

  I appreciate any help at all with this.

  Hi Digger2,

  Please follow the recommendations in this article. It's not an uncommon problem and an easy fix.

  Good luck!

• The upgrade of Inspiron 9300 Hard Drive not recognized

  I bought an upgrade of my Inspiron 9300 laptop hard drive:

  Old hard drive: TG754 Hard Drive, 60G, 9.5 MM, 7.2 K Hitachi, Moraga, unleaded

  New hard drive: 250 GB SATA 3 Gb s hard drive 16 MB 7200 RPM 2.5 IN. w o free fall Scorpio black

  TG754

  Hard drive, 60G, 9.5 MM, Hitachi 7.2 K, Moraga, unleaded

  I don't know I installed it correct (just slide in and screw it) but my problem is that my laptop does not recognize the new drive.  When starting it complains that no hard drive is, and when I boot my Windows XP it also said that no hard drive is located.

  I followed the upgrade recommended Dell so I do not know why it does not work.  I read that the SATA drives require additional drivers, but I'm sure that my old drive was already a SATA drive, so I don't understand why he is not recognized.

  Help, please.  Thank you.

  The 9300 has been performed in two versions - the vast majority were EIDE.  The last execution of production used SATA.  Yours is EIDE.

  Readers are physically the same size and made the same carrier - but does not connect the SATA version to the motherboard (check the back both discs and you'll see why).

  The EIDE version has a limit of 120G BIOS - it means not that you can not use this drive of 160 G, but the results can be unpredictable, sudden loss of all data.  Keep backups if you try a 160 - it is much safer to use a 120G.

  No, a 5400 all else equal will be slower than a 7200 - but you don't have a choice, because all manufacturers have stopped making 7200 RPM EIDE (PATA) computer laptop some time ago.

• upgrade to Windows 7 on a dell inspiron 9300 with windows xp

  I have a dell inspiron 9300 and I just upgraded from windows xp to windows 7 Ultimate edition 32 bit. I can't install the drivers of my resource cd.

  Win 7 will automatically detect the NETWORK card drivers but not the drivers for the wifi card. The easiest way is to connect the network cable to your computer and run windows update. This will update your display drivers (I have geforce go6800 and it worked) and the drivers for your wireless card. So now you have a proper and internet wireless display. Now, you can go to the dell website and download the drivers for sound card for i9300 (xp version). Run the drivers in compatibility mode for win xp and you have sound on your computer.

• SygmaTel STAC 975 X AC97 Driver / INSPIRON 9300 / without LINE-IN

  Harware is Intel 82801FBM

  ICH6-M - AC 97 Audio Controller [B-1] PCI

  Audio:SIGMATEL STAC 975 X
  AC97 Driver
  Version: A03
  OEM name: SIGMATEL
  OEM Ver: 5.10.0.4255

  I can only choosing Stereomix or microphone, but not of Line-In

  When I connect my stereo Center on the microphone (using the Setup microphone) Jack,
  I can't do any recording of music stereo (I mean the same sound on the left and right channels).

  On my precision 6300, when Iconnect taking, Sygmatel-window opens and

  ask me to choose between MIC or Line-in. Then I choose online and can be

  stereo recording of music (different sound on each channel).

  What version of software or driver compatible Sygmatel should I install on Inspiron 9300 to

  get a connection and then do stereo recording?

  Thanks for your help.

  Robycathe

  Message edited by robycathe on 10/20/2008 14:43
  Message edited by robycathe on 10/20/2008 14:44
  
  

• Change the hard drive of my Inspiron 9300

  Hello!

  This is my first post on this forum.

  Since July 2005, I have a Dell Inspiron 9300.

  As it is now out of warranty, I would change the hard drive in it.

  So I have a few questions, I'm looking for answers to if possible.

  I will present my questions in two different parts, the first is on the material, the disc itself and then the software thing.

  (A) material:

  (1) should what equipment I expect? I know it's a hard disk IDE, so I guess I have to get the same kind, in parallel ATA works?

  (2) I read here and there that the BIOS is limited to hard drives 120 GB, because more is not supported by the latter. You know a way to expand this capacity? (Only a medium chest!)

  (3) what kind of drives advise you? (Brand, speed, etc...)

  (4) I read on description hard drive 'IDE ATA 100' or ' IDE ATA 133 "in online shops, you know what it is?

  (B) software:

  (1) I would like to be sure that I will install the same things as when I do "Ctrl + F11", for the utility norton Ghost (want to keep this option!), which reinstall the entire computer with factory settings. I will get this during the installation with the recovery CD? Or you have a way to get this? (I want the same computer I have today, except a different HDD only!)

  (2) do you know how to create a D: partition, so that I have a part for programs and a part for the storage of the files?

  (3) how to install, is it: replace drive HARD; start the computer while starting on the recovery CD, Partition the disk HARD C: and D: (with the D: partitioned within the C: drive, I guess) and complete the installation of windows with the included Dell factory settings?

  I hope that I won't bore you with my questions, and you'll be able to answer. It would be nice, because I'm not a pro from the computer, only an amateur.

  Thank you very much

  Vincent

  
  

• HD upgrade: Inspiron 9300 w/SATA?

  I have an Inspiron 9300 with a SATA drive (I think). I understand that other 9300's often have an EIDE drive and the BIOS limited HD size to 100 GB or 120 GB. I'm not sure that fully understand if the limit applies to these systems that have the SATA drives as well, or if there is a limit to these bodies. I'm a little fuzzy on the question if the system fully supports a SATA too. Consider the screenshot below of HD Tune... It seems to reference both 1 SATA and ATA-100. (I thought ATA-100 EIDE)

  Thanks for your help to clear up my confusion. I would switch to 250 GB or more.

  

  
  

• Inspiron 9300

  my hard drive needs replaced... what I need to buy a hard drive Dell to fit my inspiron 9300... and if I buy from dell... ghoulish no matter which hard drive mount my 9300... like when I do the upgrade for my laptop... it tells me that there only a 80 GB HDD for my inspiron 9300.  I have 100 GB, now I really don't want to go smaller... thx

  
  

• How to clean a hardrive Inspiron 9300 with windows xp service pack 2

  OK in a "nut shell", I caught a virus and I have to wipe completely absolutely everything from my pc

  I have a Dell Inspiron 9300 which came with windows Xp Service pack 2

  The keys ctrl + F11 function dose does not work so I really need your help

  
  

• 7200 RPM HD available for Inspiron 9300?

  Bought an Inspiron 9300 @ the end of December 2005.  A year ago the 80 GB 5400 RPM HD starts giving errors failed constantly.  Tried to watch a disc that spins at 7200 RPM to replace, but the support.dell.com site is pretty vague.

  Ive found a 100 GB disk at 5400 RPM which is a replacement for $135 - see the Scorpion 160GBfor $99, but do not know which will take place in this laptop.

  so my dilemma: pay more for the 100 GB disk that has been "recommended" by the search engine, try the Scorpion and hope, it fits, or find a 7200 RPM drive on another place and try that.

  any tips?

  Thank you

  
  

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.