Specifying an accelerator key using the accessKey, PROPERTY of SCRIPT

Similar Questions

• HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Hey everybody,

  Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Thank you

  Bill

  Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.

• IM new to LabVIEW. Is it possible to send the signal to more than one parcel on a chart by using the value property of the graph node

  I'm new to LabVIEW. IAM trying to display two plots on a graph using the node property value charts. I tried to feed the two signals into a signal of fusion and then in the value property node, but it did not work. Then I tried to build a table of two signals and it powers the value of hardware node. It did not work. What escapes me, should I use the node property value this way?

  
  

• Use the node property to get the value of control

  Hi all

  I know that you should keep the use of local variables to a minimum in order to avoid race conditions. Is this the same problem if you using the eg property node. a digital control?

  The reason why I want to do is to keep the son of the intersection when I need to use a control on one side of the diagram across the diagram...

  Basically to make the scheme simple and enjoyable to watch.

  I hope that makes sense!

  Good day!

  Kind regards

  Tommy

  Tombech84 wrote:

  [...] Is this the same problem if you using the eg property node. a digital control? [...]

  Exactly. Perhaps, he creates the race conditions and should not be used. Using wires to connect the terminals is the approach only "Save".

  In addition, performance decreases in the following order:

  -Terminal (+)

  -variable (0)

  -property to value node set (-)

  Norbert

• Cound do not use the stage property

  I couldn't use the placement property

  Main.As

  package {}

  import flash.display.Sprite;

  SerializableAttribute public class Main extends Sprite {}

  public var progressAni:ProgressAni;

  public void Main() {}

  progressAni = new ProgressAni();

  }

  }

  
  

  ProgressAni.as

  package {}
  import flash.display.Stage;
  public class ProgressAni {}
  
  public var progressAni:ProgressAni;
  public void ProgressAni() {}
  trace (stage.stageWidth);
  }
  }
  }

  While, I run the application. I show message

  "" cancel the stadium property definition".

  Yes, exactly. After adding the object on the stage using the addChild function you can access variables of step of it.

• Script to record an action that will convert the sRGB to CMYK file, then use the action in a script to support the process of a folder full of images?

  Is it possible to save an action to convert from sRGB to CMYK, then use the action in a script to support the process of a folder full of images?

  Do action, and run as a batch of PS (file > Automate > batch), or bridge (Tools > Photoshop > batch).

  Pay special attention to all the 'destination', 'save' and 'close' steps. You want to save a copy without overwriting the original, which can easily happen.

• By using the sign $ on MaxL scripts

  Hi all
  
  How to use the sign $ on MaxL scripts work? I've seen scripts that $ sign was used instead of user name, password, server name, etc. What are the benefits of its use and how can it be implemented?
  
  Thanks in advance.
  
  A

  These are positional variables that are passed to the script for the origination bat file (or a shell script for unix). For example, if you have in your script
  Login $1 $ 2 $3;

  Your calling batch file would be \Essmsh
  myMaxLFile admin password localghost

  The admin would be password $1 $ 2 and localhost $3, you can have more variables there you like.

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• How can I use the filter property of the blur

  I commented the alpha line in my script but I would use the blur filter property.

  My animation seams a little brusque acceleration effect can be doe or not... If yes how?

  Please take a look at the attached pictures for more details... thank you.

  TX

  var dir:int = 1;

  var T:Timer = new Timer (1);

  T.addEventListener (TimerEvent.TIMER, Rabat);

  Rabat (event: TimerEvent) function: void

  {

  dragonfly_mc.wings_mc. ScaleX +=.05 dir.;

  If ((dragonfly_mc.wings_mc.scaleX > = 1 & & dir > 0) |)

  (dragonfly_mc.wings_mc.scaleX < =.3 & & dir < 0))

  {

  dir * = - 1;

  dragonfly_mc.wings_mc.Alpha =. 3;

  import flash.filters.BlurFilter.quality;

  Event.updateAfterEvent ();

  }

  }

  T.Start ();

  filter interpolation (that I provided) interpolated the filter of a blur from 0 to a blur of 30.

  certain classes must be imported.  the flash compiler will let you know what needs to be imported.  If it does not recognize a class, you must import it.

• Disable the button by using the node property

  I used a button which has the button is pressed again and again, I want this button to get disabled when needed up to 6. I used a business structure that compares the value when it is greater than 6, it gets the true value and the structure of the case must turn off the button, but I run the code the button is already disabled.

  Can someone please guide me where I made mistake.

  Kind regards

  Ather

  In the case of range? and downstairs is the two True in any given iteration of the loop, you will write to the serial port twice with only about one millisecond between the Scriptures. Is that what you want? The remote device can handle two sequential writes?

  The code in the two structures case is identical. It is usually better to make a Subvi of duplicated code. Then if ever it needs to be changed, simply change it one place.  If you use the decimal string number, simply two cases on the internal structure of the case.

  It is not necessary to have two close functions of VISA for the same session. In fact one of them always generates the 1073676418 warning: the specified object reference is not initialized.

  This is a cleaned version a little with most of above changes implemented.

  Lynn

• Can access the shared folder by using the name of the server, but is unable to use the intellectual property

  

  Hi, I need help with a very strange problem.

  I have a Server 2003 domain controller to PC and all the domain user can access any shared folder of the server using IP address or FULL domain name.

  So I joined a R2 of 2012 new server to the domain as a workstation normal and not as a new domain on the network controller, and the problem is that one cannot access a shared folder on the new server by using the IP, but can be accessed using the name of the computer.

  My Admin user can access the folder using the IP address or the name comp. on any work, but the user of my AD position may not use intellectual property.

  I can using Ping IP or name of the computer for every user of AD.

  Please check the attached images.

  When I try to access it using IP, it gives me the following error:

  \\192.168.0.2 is not accessible. You might not have permission to use this network resourse. Contact the administrator of this server to fing out if you have access permissions.

  Currently, there are no available connection server to process the logon request.

  Hello

  You may need to ask the question on the TechNet Forums:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Use the information property in the form of control

  To all:

  I would like to get help to use a PDM file property information.

  I want to do is get the frequency sample clock of the file (that has been written above in an another VI) and use this sample clock frequency in the current vi without having to use another variable.

  I can see the information very well in a signpost, but how can I convert the 'variant' to a double type, data type I can use to power the mutual operation?

  attached is a JPG file with little VI by using the property

  Thanks for instructions

  Hi a. Lopez,.

  Him 'TDMS get Properties.vi' has an entry called 'data' type. You can wire a digital constant DBL in this entry and your property out rather than being type Variant value will be of type DBL. You can also find examples of LabVIEW and find examples of this (for example "TDMS - example of simultaneous access of file vi).

  I hope this helps.

  See you soon,.

  -Russ

• Scene 1 layer Actions 1120: access of the window using the undefined property!

  I'm really new to Flash and I use the current CC of Flash to create a banner with the evolution of the images and a button that target changes for each slide.

  I'm in a HTML Canvas and everything seems to work okay in test Ctrl + entry with the button goes to different pages.

  5 errors occur when I export to SWF Movie

  Scene1, layer, frame 1 line 4 column 2 1120: access of undefined property window.

  Scene1, actions layer, frame 40 line 4 column 2 1120: access of undefined property window.

  Go looking around, it seems to be the button actions that I used code snippets for.

  Actions: Frame1

  this.buttonOne.addEventListener ("click", fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage() {}

  window.open ("http://www.fireflybbq.eu/#!") ("product/prd1/2832376001/kansas-sweet-%26-smoky-bbq-rub", "_blank");

  }

  Actions: Frame 40

  this.buttonTwo.addEventListener ("click", fl_ClickToGoToWebPage_2);

  function fl_ClickToGoToWebPage_2() {}

  window.open ("http://www.fireflybbq.eu/#!") ("rub / c1faw", "_blank");

  }

  Im not sure what is wrong with the code as it runs in the test, but not in the export any help would be appreciated

  This should work for a publication of html5, but not for a swf file

  to a swf file, you must use actionscript, not javascript window.open is the javascript code.

  Use the externalinterface class call javascript in html file swf or navigateToURL incorporation

• using the original property value forms

  I have a form called bill expedition.
  In the i uses a sequence to generate the build under when_button_pressed

  create_record;
  select :blockname.item||s_seq.nextval  into :ship.billid from dual;

  and it works very well
  
  
  Now in the palette property is a property called intial value under data
  This is adjustable as
  
  : Blockname.itemname | Select s.seq.nextval in: double ship.billid;
  
  Published by: Chase Suhail on November 21, 2010 22:35
  
  Published by: Chase Suhail on November 21, 2010 22:41

  Not exactly VALUE INITIALS. But you can do using block called WHEN-CREATE-RECORD-level trigger and use the code below...

  SELECT :blockname.item||s_seq.nextval
  INTO :ship.billid
  FROM dual;
  

  The thing you need to know which generated once sequence number cannot be regenerated. I mean if user is in the new record and suppose to insert the new file number and the sequence generated in the field and then he decided to do not create/insert record then the next time the user will get the new serial number.

  -Clément

• Cannot use the context property in a page created from an another qml with createObject()

                      gestureHandlers: [
  
                          TapHandler {
  
                              onTapped: {
                                  var page = infoPage.createObject();
                                  taskCont.ListItem.view.pushNewPage(page); //this pushes page to navigationPane (function at top of qml)
  
                              }
  
                              attachedObjects: ComponentDefinition {
                                  id: infoPage;
                                  source: "asset:///taskInfo.qml"
                              }
                          }
                      ]
  

  This is how I created the page of 'taskInfo. In the PRC, I registered a context property that I am able to access it from the current page but not in 'taskinfo. "gestureHandlers: []" is "listItemComponents".

  I expect to access the object of 'taskInfo' is because I am able to access it from another page created the same way.

  Here's how to register the context property.

  QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
  mainModel = new ListModel();
  qml->setContextProperty("Model" , mainModel);
  

  OK, I found my problem.

  The reason why he doestn can't work because the page is pushed out "main.qml".

  This is part of my main.qml

  Container {
              id: main_content
  
              TaskList {
              }
  
          }
  

  TaksList is another qml file. When I createObject from this qml file, somewhy context property is not trafered to this object.

  I've found a workaround. I created a function in main.qml and only now I create object, so the contextproperty is transferred