Split the Audio from the video?

Similar Questions

• Help! I need to extract audio from a video to an audio file in my HARD drive

  Hello

  I have a project that needs to me mastered (the audio part at least), and I need to extract the audio parts of my sequence in 'physical' files on my HARD drive, so I can load my project (with these separate audio files) on another computer where the control will be done... but I can't do it! .. is there anyway I can do this?

  Help, please!

  Thanks in advance...

  Al

  You can select an avi clip and right click, then choose Edit in Soundbooth. This creates a wav audio file in the clip, with the same name as the video clip with "extract" added automatically.

  Also, it replaces the audio in the sequence with the extracted file, but does not change the original item.

• How do remove you audio from a video and then use an audio of a different video to put in the first video?

  I have a video with good quality video but audio very bad, but I have another video of the episode even with the bad video but the sound quality. How can I remove the audio good video bad and replace it in the latest version of Windows movie maker on Windows 7 with audio video bad?

  Basically, you need to capture the sound quality to a separate mp3 file outside the filmmaker and then delete the wrong audio track and the good idea of layering.

  According to the source, this could be as simple as recording audio reading even if you end up with poor quality than the one you want to replace. If a file, it is possible to upload a video to mp3 converter.

• Cannot read audio from a video clip via external USB interface

  Problem - when I try to play the audio on my iMac to a video clip in Lightroom cs6 my interface usb audio, I can get sound via audio integrated, even if iTunes play through fine audio interface.

  Hi jeffreyc;

  Well, its something related to some settings within your mac under the sound option.

  Kind regards

  Mohit

• Can I extract audio from video?

  I want to extract the audio from a video, but I don't want to import the video to audition only. Can I do this?

  I'm working on Audition CS5.5

  Thank you!

  Hey guys,.

  Maybe I'm misunderstanding here, but simply to open a video resource will give you this behavior. When a video resource opens in Audition CS5.5, we split the stream in the video and audio part automatically.

  Yes, this means you have the video stream in your Panel files as well, but you can simply close or ignore it if you won't need it.

  Audio can be edited and saved as a single audio resource just as he might the Audition 3 and earlier versions.

  Please let me know if I misunderstood the goal here.

  Thank you

  -Ron

• Can I remove audio from video in Windows Vista?

  De :  GEMMA47

  Message: is it possible to remove a vidio audio I have a vidio of holiday with a language of choice in places. If possible I would like to add music to. I'm using vista Home premium

  De : John Inzer

  In Movie Maker... right click /... cut the Audio track and add your new music to the Audio track music.

  If you want only some parts muted... split the video and just cut specific segments.

  If you do not see the Audio track... develop the tracks by clicking on the +.

  John Inzer

  Another response of the community of Windows Vista discussion groups

• Need help for export to 1080 p 60 fps into 14 components (the video is silent)

  I just bought 14 items two days before, so I'm incredibly at this news. In which case it is important, I run 64 bit Windows 10.

  So, I create a 3D animation in MMD (MikuMikuDance), a program of 3D animation to be animated music videos.

  Following another problem with MMD, if I want to make the animation to superior qualities, I need to make it into pieces - if it's 1080 p 60 fps, then the pieces is executives from 1999. Once it restores a 2000th image without taking a break, the program crashes. For the same reasons, I can't use the audio in the original clip, so I need to add it separately.

  So, I use editing programs to combine these pieces and audio into a single file, I can then save on my hard drive and download on various websites. That's what my edit looks like so:

  

  When I tried to export the file to MP4, I discovered that there is no integrated adjustment for export to 1080 p 60 fps; I could do 720 p 60 fps or 1080 p 30 fps, but 1080 p 60 fps was not an option. I decided to customize a setting for 1080 p 60 fps, but when I watched the videos, it was 1080 p 60 fps, but it is also completely silent, with no sound whatsoever. At first, I wondered if it was just a fluke and it made again. He was still silent. I restarted my computer, and left the computer alone while it has made, but he was still silent.

  A test, I used the setting for 1080 p 30 fps, and while it was not the quality I wanted, the audio worked well in this one. So, the problem - I guess - is with my fps setting custom 1080 p 60. If it works on an integrated framework, but not a customize one, then this is the only conclusion I can come to.

  Here is a series of screenshots showing my custom setting:

  

  Because you can't see it all, the name of the preset is "MP4 - H264 1920 x 1080 p 60 fps 15Mbps Medium ' (I just changed pre-set at 60 fps 1080 p and reflects by changing the 30 in the title to 60; "I do not understand most of the title); and in case it is too small to see, the custom settings are:

  Resolution: 1920 x 1080

  Format: H.264

  Frame rate: 60

  Audio: MPEG, 160 kbps, 48 kHz, stereo

  Lasted: 3 minutes, 34.34 seconds

  Flow: 15 MB/s

  Now, here's the complete list of parameters for the screening:

  

  

  

  

  So, which-if whatever this is-am I hurt? Should I change the bitrate or something?

  Try to set your audio Dolby Digital instead.

  But a lot depends on a lot.

  I don't have "everything about the specs of the MMD video that you use in your project, but which could also be a factor in this problem."

  And so couldn't your video settings, personalized 1920x1080p60 MP4, which can not be in the capacity of the program.

  And no matter what video player you play your MP4 on. Unless you use a good versatile player like VLC Media Player, you don't hear no audio from your video could be due more to the media player as the audio file itself.

• How can I display a single frame of the video for a few seconds?

  I do a video demo and want my recorded video on pause for about 20 seconds, while I text boxes different pop up and explain what's happening on different parts of the screen.  How can I do this?  I looked at all the options menu and I can't find anything that might make it work.

  Hello

  You work with a file CPTX or CPVC?

  If it's a CPTX, you would simply insert a button that stops the slide until the user is ready to move forward.

  If it is a PVC - c, I think you could split the video. Then preview and put in pause the song where you want to insert the pause. Screen capture image and save it as an image. Then insert the image and the time for the desired time.

  See you soon... Rick

• Flash will load audio but not video... and then crashes...

  Flash will load the audio from a video, but the video display will be green.  The player then crashes.  Initially, this was just my videos from YouTube.com, but now I have problems with Windows Media Player Classic (and sometimes with Windows Media Player).  I tried uninstalling and reinstalling several times.  Flash is not displayed in my programs, but can I uninstall in Control Panel.

  I have Windows 7 and 64-bit.

  I use the 10.3.181.34 version.  According to http://www.adobe.com/software/flash/about/ I have a flash installed successfully.  Yes, I see the image.

  These are the files in my SysWOW64 > C:\windows\system32\macromed > Flash

  Flash10m.ocx

  FlashInstall.log

  flashplayer. XPT

  FlashUtil10u_Plugin.exe

  install.log

  Npswf32.dll

  I use Firefox 5.  Shockwave Flash 10.3.181.34 is enabled.

  I have no idea what to do. Help.

  As soon as I read 'green' in any position, the first thing that comes to mind is to disable hardware acceleration.  Right-click on the Flash Player test page and select settings.  Then on the display panel uncheck "enable hardware acceleration".

• In Movie Maker, I want to place a photo on a part of a video without stopping the audio from the video.

  It's all in Windows Movie Maker (Windows Vista)

  Example:

  First of all, I want to have a video (with audio),
  change photo (with audio video) and then continue to the same as before (with audio) video

  I have a video with audio.
  I want to put an image instead of the Visual part of the video.
  But in doing so, I want to still the audio from the video to play while the image is on the screen.

  Please help me, I need the answer as soon as possible.

  Hi benlach,

  Welcome on the site of Microsoft Windows Vista Community.  I suggest you try these methods

  Method 1:

  1. drag a copy of the video on the audio / music.

  2. her completely to the left on the track.

  3. right click / Mute the Audio track... now the audio will be separated from the video but still play correctly.

  4. divide the video and to delete an article of the same duration as it turned again.

  Method 2:

  1 divide your video clip on each side of the area where will be the stills.

  2. now... drag the part cut on the audio / music. BTW... If you want to add a second 5 again... Remove 5 seconds of the video clip. (Info below on the separation if you need)

  3. slide your shots yet to the time line and drop them to the location where you have removed the video.

  4. the Audio clip on the audio / music can be dragged to the right or left to adjust its position.

  Info on splitting...

  "Split a Clip in Movie Maker 2.1"

  1. drag the video clip on the timeline.

  2. play the video/audio by clicking on the 'Play' button under the display screen.

  3. you will see the playback indicator (vertical line) to move forward on the scenario.

  4. click on the "Pause" button at the location where you want to cut and type... CTRL + L or click the "Split" button at the bottom of the display screen. (You can also make adjustments by dragging the playback indicator)

  5. as the many coves that you want and delete unwanted items by right click / Delete.

  And... Movie Maker 2.1 shows that all of the other images. To see all the pictures of Movie Maker 2 shows you all-other-frame. While you are editing project, Movie Maker Vista displays each image. It is generally not a problem ignoring middle managers, but sometimes you notice a flickering image in a clip that is a "stray", and you can not see or cut it out. If you apply the Slow - Down - half video effect to a clip in the timeline panel, see you then each image rather than everyone. You can see the frame problem and separate out. Remove the effect of the clamp to return to normal.

  Let me know if that does or does not work. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft Answers Feedback Forum and tell us what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Qosmio G50-12 q: no audio signal while moving the video files from the camcorder

  Hello

  I have a portable PC Toshiba Qosmio G50 - 12 q with 640 GB HARD drive, and equipped with 4 GB of Ram saw the Completed window system upgraded to the version of service pack 2

  I connected the video camera Sony PC 115 to the PC via the I.Link IEEE 1394 cable while that I import a video to Window Movie Maker in order to save it.

  At the moment where it is reproduced in the form of Movie Maker, I see the video reproduced the video camera but don't feel no audio. Then when I'm done for import video I want and he always see in Movie Maker, the program reproduces regularly or video he recorded or the audio exactly I didn't think it was important while it.

  It ' is usually?

  Working group than in the phase of import that I would have to see and feel or the audio video. Task not is defective cable because when I see the video recording in Movie Maker I feel also the audio base, means that the audio has left the video camera, is entered into the PC via the I.Link recorded it.

  To the point, I can hear the audio in the phase of transfer / import video or any other audio device from the camera / video, I have to in case of change inside of Window Movie Maker or the window given some details of formulation considers also the I.Link Jack specifically?

  Or the cable is connected between the video camera and PC with purpose there details? Even if it seems to me have connected well it boom ' as I have said, l "audio is saved."

  Thanks and greetings

  I have Sony camcorder DCR-TRV520E and in the past, I recorded several movies on my laptop.
  I used the Ulead Movie studio application and everything was OK.

  10 minutes ago that I tested it with Windows Movie Maker (Vista) too. Here a few facts:
  -My cam Sony is recognized correctly
  -Started Windows Movie Maker and chose the option IMPORT > digital video camera
  -Traveled in the right folder
  -On the next stage of the single application started rewinding videotape
  -Importing video has begun only and when finished I checked it and the sound was there.

  Later I chose the option "publish on" > this computer and after 20 minutes it was all over.

  I just use the firewire cable. Nothing special.
  I really don't understand what's wrong there.

  East - the first time do you it?

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• I deleted from the temporary folder and now my microphone and camera do not work, the audio and the video hangs when activated

  C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if taken in too much data to be processed during recording, and when I try to speak, it comes out as a big sound introduction text that's noise and videos recorded is accelerated as a 10 x. I bought a new webcam installed and everything went well, and exactly the same thing happened. (microsoft livecam this time) no sound. Anyone have any ideas?

  Hi Johnny,.

  Perform the System Restore to an earlier date and check if it helps.

  System restore

  System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

  Hope this information helps.

• Windows 7 Media Center plays audio from VOB, no video. However, the VOB files play fine in Windows Media Player 7. What gives?

  I have VOB files in a VIDEO_TS folder.  Windows 7 Media Center will generate a thumbnail for them, but when I play them I'm audio but not video.  However, when I play in Windows Media Player will play without any problem.  Can someone help me solve this problem?

  Hello Pinkled,

  Just got out how we can get video of .vob files play correctly:

  It's pretty simple, just add the folder to the library of MOVIES instead of VIDEOS. It is true that videos, just listen to the audio, but no video appears during playback.
  Once you add to the movie library, W7 Media Center it will read "like a DVD" then you will also be able to navigate through menus.

  Hope that works for you also.

  Kind regards

  Miguel.

• How "unpin" the audio from the video?

  Hello

  I have a video clip on the timeline. I wanted to move the video but the sound of the rest where he is...

  Whenever I selected / highlighted video, audio correspondent below also automatically selected / highlighted. How to choose the video without the audio selected?

  Thank you

  Right-click on the clip on the timeline > unlink. Select the video, and then move it.

  .