SSL VPN Tunnel mode, "page cannot be found" - Urgent!

Similar Questions

• Why Firefox takes me to a page that says: "Oops Page cannot be found" when I click on a link in a secure site. Not with IE: only Firefox.

  If I go to a secure site and click on a link, it take me to "Oops Page cannot be found". I have reset Firefox, uninstalled and re installed, disabled my Add Ons and any other suggestions for the forum. Nothing works and that this does not happen with IE. Is the bottom line that I have to use IE for these sites? I prefer Firefox but can not solve this problem.

  You found, buddy. It was my AVG Security Toolbar. My computer will be vulnerable to the virus if it is disabled?

  Once again, thank you very much for your time.

  KUDOS to THE MODERATOR that solved the problem.

• problem loading page (404 error) it says that the page cannot be found when I try to access the game gangsters through my mysapce account and I can not access is no longer with firefox and I want to know why I can't, guys please can you get?

  I can't access my account of gangsters through myspace. «whenever I try to open it I get "problem loading page" "404 error" "this page cannot be found" and it won't let me access it.» MySpace works fine, but as soon as I click on the application of gangsters I get the 404 error, this page could not be found, problem loading page! can you please help?

  This has happened

  Each time Firefox opened

  == I am trying to access game of gangsters through myspace

  The problem can be solved by opening FF and choose the tools... To Add one... Select the SEARCH addon, then choose UNINSTALL FF browser... When asked to restart, then reload the gangsters. It worked for me. The suggestion on the 404 that says to remove the search via Add/Remove programs is completely BS, that research does not appear there.

• GET VPN tunnel mode and transport mode multicast

  Hello

  I really don't understand why GET VPN uses a tunnel for packets in multicast mode:

  Examples of a @multicast = 239.0.0.37:

  (1) here a package to GET VPN: | 239.0.0.37 | ESP | 239.0.0.37 | transport layer. Payload: : This way, he uses (two IP headers) IPSec tunnel mode.

  (2) here a package that I imagine to be better: | 239.0.0.37 | ESP | transport layer. Payload: : Mode of transport IPsec, 1 registered IP header = fewer bytes used.

  In both cases, the IP header cannot be secured, cause GET VPN Tunnel using the same multicast IP header (this is why it works so well...)

  I don't understand why Cisco uses model IPsec in tunnel mode to encapsulate packets instead of the mode of transport. I can't find a descent of answer to this question... Maybe my question is not relevant?

  Thanks for your replies.

  Concerning

  Stone,

  I quote DIG it

  It is worth noting that tunnel header preservation seems very similar to IPsec transport mode.
  However, the underlying IPsec mode of operation with GET VPN is IPsec tunnel mode. While
  IPsec transport mode reuses the original IP header and therefore adds less overhead to an IP
  packet (5% for IMIX packets; 1% for 1400-byte packets), IPsec transport mode suffers from
  fragmentation and reassembly limitations when used together with Tunnel Header Preservation
  and must not be used in GET VPN deployments where encrypted or clear packets might require
  fragmentation.
  

  In practice, reassambly concerns and initially odd behaviors with some encryption engines caused the recommendation to be tunnel mode.

  That being said, for large packages (where fresh important generals) overhead costs are minimal. For small packages (voice), the overhead is large, but the packet (after encapsulation) size should not be a problem.

  M.

• My miniature links to larger images to appear that a Web page cannot be found error

  I'm trying to put images on my page and link to larger images. Show thumbnails, but when I try to open the related files, a Web page can be found in the error page is displayed. One or two of the larger images open, but the majority of them does not work. When I saw my site in the browser all links and images seem to work fine. I have to create a separate page for each image or can I just link to the files in the Web site images folder?

  If your problem is solved, please mark this topic as replied.  Thank you.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• IOS SSL VPN issues

  Hi Experts.

  I can't get SSL VPN tunnel mode to work on a router Cisco1801. I can get the side URL works fine, but when I try and set up the Tunnel with SDM mode. I get the following error message when I try to connect.

  An error was found in the certificate of the VPN server.

  Received certificate is signed by an untrusted authority.

  Then I have the ability to install the certificate. This process seems to work, but I get the following error.

  The form of received HTTP SSL VPN gateway response code indicates an error, contact your network administrator.

  I do something wrong regarding the certificate?

  I'm sorry, just had a chance to flip through your configs. It seems that you are using a VPN pool that is not directly connected to the router. You must either use a pool directly connected or create a loopback on the same subnet.

  Also after exit

  debugging webvpn tunnel

  debugging webvpn auth

  debugging webvpn svc

  Concerning

  Farrukh

• Cannot access internal network so AnyConnect SSL VPN, ASA 9.1 (6)

  Hello Cisco community support,

  I have a lab which consists of two virtual environments connected to a 3750-G switch that is connected to a 2901 router which is connected to an ASA 5512 - X which is connected to my ISP gateway. I configured SSL VPN using AnyConnect and can establish a VPN to the ASA from the outside but once connected, I can't access internal network resources or access the internet. My information network and ASA configuration is listed below. Thank you for any assistance you can offer.

  ISP network gateway: 10.1.10.0/24

  ASA to the router network: 10.1.40.0/30

  Pool DHCP VPN: 10.1.30.0/24

  Network of the range: 10.1.20.0/24

  Development network: 10.1.10.0/24

  : Saved
  :
  : Serial number: FCH18477CPT
  : Material: ASA5512, 4096 MB RAM, CPU Clarkdale 2793 MHz, 1 CPU (2 cores)
  :
  ASA 6,0000 Version 1
  !
  hostname ctcndasa01
  activate bcn1WtX5vuf3YzS3 encrypted password
  names of
  cnd-vpn-dhcp-pool 10.1.30.1 mask - 255.255.255.0 IP local pool 10.1.30.200
  !
  interface GigabitEthernet0/0
  nameif inside
  security-level 100
  IP 10.1.40.1 255.255.255.252
  !
  interface GigabitEthernet0/1
  nameif outside
  security-level 0
  address IP X.X.X.237 255.255.255.248
  !
  interface GigabitEthernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  boot system Disk0: / asa916-1-smp - k8.bin
  boot system Disk0: / asa912-smp - k8.bin
  passive FTP mode
  permit same-security-traffic intra-interface
  network of the NETWORK_OBJ_10.1.30.0_24 object
  10.1.30.0 subnet 255.255.255.0
  network obj_any object
  network obj_10.1.40.0 object
  10.1.40.0 subnet 255.255.255.0
  network obj_10.1.30.0 object
  10.1.30.0 subnet 255.255.255.0
  outside_access_in list extended access permitted ip object NETWORK_OBJ_10.1.30.0_24 all
  FREE access-list extended ip 10.1.40.0 NAT allow 255.255.255.0 10.1.30.0 255.255.255.0
  access-list 101 extended allow any4 any4-answer icmp echo
  access-list standard split allow 10.1.40.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any inside
  ICMP allow all outside
  ASDM image disk0: / asdm - 743.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) source obj_10.1.40.0 destination obj_10.1.40.0 static static obj_10.1.30.0 obj_10.1.30.0 non-proxy-arp-search to itinerary
  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.1.30.0_24 NETWORK_OBJ_10.1.30.0_24 non-proxy-arp-search to itinerary
  Access-group outside_access_in in interface outside
  !
  Router eigrp 1
  Network 10.1.10.0 255.255.255.0
  Network 10.1.20.0 255.255.255.0
  Network 10.1.30.0 255.255.255.0
  Network 10.1.40.0 255.255.255.252
  !
  Route outside 0.0.0.0 0.0.0.0 10.1.10.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  without activating the user identity
  identity of the user by default-domain LOCAL
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.1.0 255.255.255.0 inside
  http X.X.X.238 255.255.255.255 outside
  No snmp server location
  No snmp Server contact
  Crypto ipsec pmtu aging infinite - the security association
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  full domain name no
  name of the object CN = 10.1.30.254, CN = ctcndasa01
  ASDM_LAUNCHER key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate c902a155
  308201cd 30820136 a0030201 020204c 0d06092a 864886f7 0d 010105 9 02a 15530
  0500302b 31133011 06035504 03130 has 63 61736130 31311430 12060355 74636e64
  0403130 31302e31 2e33302e 32353430 1e170d31 35303731 32303530 3133315a b
  170d 3235 30373039 30353031 33315 has 30 2 b 311330 0403130a 11060355 6374636e
  64617361 30313114 30120603 55040313 0b31302e 312e3330 2e323534 30819f30
  0d06092a 864886f7 010101 05000381 8 d 0d 003081 89028181 00a47cfc 6b5f8b9e
  9b106ad6 857ec34c 01028f71 d35fb7b5 6a61ea33 569fefca 3791657f eeee91f2
  705ab2ea 09207c4f dfbbc18a 749b19ae d3ca8aa7 3370510b a5a96fd4 f9e06332
  4355 db1a4b88 475f96a1 318f7031 40668a4d afa44384 819d fa164c05 2e586ccc
  3ea59b78 5976f685 2abbdcf6 f3b448e5 30aa96a8 1ed4e178 0001300 020301 4 d d
  06092a 86 01010505 00038181 0093656f 639e138e 90b69e66 b50190fc 4886f70d
  42d9b4a8 11828da4 e0765d9c 52d84f8b 8e70747e e760de88 c43dc5eb 1808bd0f
  fd2230c1 53f68ea1 00f3e956 97eb313e 26cc49d7 25b927b5 43d8d3fa f212fcaf
  59eb8104 98e3a1d9 e05d3bcb 428cd7c6 61b530f5 fe193d15 ef8c7f08 37ad16f5
  d8966b50 917a88bb f4f30d82 6f8b58ba 61
  quit smoking
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  VPN-addr-assign local reuse / 360 time
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Trust ASDM_Launcher_Access_TrustPoint_0 vpnlb-ip SSL-point
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-linux-3.1.09013-k9.pkg 4
  AnyConnect image disk0:/anyconnect-macosx-i386-3.1.09013-k9.pkg 5
  AnyConnect image disk0:/anyconnect-win-3.1.09013-k9.pkg 6
  AnyConnect enable
  tunnel-group-list activate
  internal GroupPolicy_cnd-vpn group policy
  GroupPolicy_cnd-vpn group policy attributes
  WINS server no
  value of server DNS 8.8.8.8
  client ssl-VPN-tunnel-Protocol
  by default no
  xxxx GCOh1bma8K1tKZHa username encrypted password
  type tunnel-group cnd - vpn remote access
  tunnel-group global cnd-vpn-attributes
  address-cnd-vpn-dhcp-pool
  strategy-group-by default GroupPolicy_cnd-vpn
  tunnel-group cnd - vpn webvpn-attributes
  activation of the alias group cnd - vpn
  !
  ICMP-class class-map
  match default-inspection-traffic
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map icmp_policy
  icmp category
  inspect the icmp
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  service-policy icmp_policy outside interface
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:261228832f3b57983bcc2b4ed5a8a9d0
  : end
  ASDM image disk0: / asdm - 743.bin
  don't allow no asdm history

  Can you confirm that this is correct, your diagram shows your IP address public on ASA as 30 while you have assinged on 'outside' interface like 29?

• Unable to connect to the internal network of SSL VPN

  Setting the time first ASA 5512 and I did a lot of research to solve my problem but no luck. I really appreciate if I can get help.

  After having successfully connected to ASA via SSL VPN. I am only able to ping to the outside interface (10.2.11.4).

  Please check my config and I would like to know what the problem is. Thank you

  : Saved
  :
  ASA 9.1 Version 2
  !
  hostname asa-01
  domain corporate.local
  activate t8tpEme73dn9e0.9 encrypted password
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  t8tpEme73dn9e0.9 encrypted passwd
  names of
  sslvpn-ip-pool 10.255.255.1 mask - 255.255.255.0 IP local pool 10.255.255.100
  !
  interface GigabitEthernet0/0
  nameif outside
  security-level 50
  IP 10.2.11.4 255.255.255.0
  !
  interface GigabitEthernet0/1
  nameif inside
  security-level 100
  IP 10.2.255.18 255.255.255.248
  !
  interface GigabitEthernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 0
  IP 192.168.1.1 255.255.255.0
  !
  boot system Disk0: / asa912-smp - k8.bin
  passive FTP mode
  clock timezone STD - 7
  clock to summer time recurring MDT
  DNS domain-lookup outside
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name 10.2.9.23
  10.2.1.1 server name
  Server name 10.2.9.24
  domain corporate.local
  network of Trusted subject
  10.2.0.0 subnet 255.255.0.0
  the object to the outside network
  10.2.11.0 subnet 255.255.255.0
  network ss object
  10.2.11.0 subnet 255.255.255.0
  network of the VPNlocalIP object
  10.255.255.0 subnet 255.255.255.0
  the object of the LAN network
  10.2.9.0 subnet 255.255.255.0
  network of the VPN-INSIDE object
  subnet 10.2.255.16 255.255.255.248
  tcp4433 tcp service object-group
  port-object eq 4433
  standard access list permits 10.2.255.16 SPLIT-TUNNEL 255.255.255.248
  standard access list permits 10.2.11.0 SPLIT-TUNNEL 255.255.255.0
  host of access TUNNEL of SPLIT standard allowed 10.2.9.0 list
  global_access list extended access allowed object VPNlocalIP object LAN ip
  global_access list extended access permitted ip LAN VPNlocalIP object
  pager lines 24
  Enable logging
  asdm of logging of information
  host of logging inside the 10.2.8.8
  Debugging trace record
  Outside 1500 MTU
  Within 1500 MTU
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 713.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  Static NAT to destination for LAN LAN static VPNlocalIP VPNlocalIP source (indoor, outdoor)
  Access-Group global global_access
  Route outside 0.0.0.0 0.0.0.0 10.2.11.1 1
  Route inside 10.2.0.0 255.255.0.0 10.2.255.17 1
  Route inside 10.255.255.0 255.255.255.0 10.2.255.17 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  CA-Kerberos kerberos protocol AAA-server
  CA-Kerberos (inside) host 10.2.9.24 AAA-server
  Corp.PRI Kerberos realm
  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  http server enable 4431
  http 192.168.1.0 255.255.255.0 management
  http 10.2.0.0 255.255.0.0 outside
  redirect http inside 80
  redirect http outside 80
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint _SmartCallHome_ServerCA
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  name of the object CN = ciscoasa
  Keypairs 4151
  Proxy-loc-transmitter
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint1
  Terminal registration
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint2
  Terminal registration
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint3
  Terminal registration
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint4
  Terminal registration
  name of the object CN = vpn.corp.com
  ASA_PKC_One key pair
  Configure CRL
  trustpool crypto ca policy

  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Telnet timeout 15
  SSH 10.2.0.0 255.255.0.0 inside
  SSH timeout 15
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  outside access management
  management of 192.168.1.2 - dhcpd addresses 192.168.1.10
  enable dhcpd management
  !
  a basic threat threat detection
  host of statistical threat detection
  statistical threat detection port
  Statistical threat detection Protocol
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 10.2.9.23 source outdoors
  SSL cipher aes128-sha1-3des-sha1
  management of SSL trust-point ASDM_TrustPoint4
  SSL-trust outside ASDM_TrustPoint4 point
  SSL-trust ASDM_TrustPoint4 inside point
  WebVPN
  allow outside
  No anyconnect essentials
  AnyConnect image disk0:/anyconnect-win-3.1.04063-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  list of chip-tunnel TerminalServer mstsc.exe Terminal windows platform
  attributes of Group Policy DfltGrpPolicy
  value of server DNS 10.2.9.23
  L2TP ipsec VPN-tunnel-Protocol ikev1
  field default value corp.com
  WebVPN
  value of customization DfltCustomization
  internal group CA-SSLVPN-TEST strategy
  attributes of CA-SSLVPN-TEST-group policy
  WINS server no
  value of server DNS 10.2.9.23
  client ssl-VPN-tunnel-Protocol
  field default value corp.com
  internal group CA-CLIENTLESS-TEST strategy
  attributes of group CA-CLIENTLESS-TEST policy
  clientless ssl VPN tunnel-Protocol
  WebVPN
  value of URL-list of the contractors list
  chip-tunnel enable TerminalServer
  ssluser nS2GfPhvrmh.I/qL encrypted password username
  username ssluser attributes
  Group-VPN-CA-SSLVPN-TEST strategy
  client ssl-VPN-tunnel-Protocol
  group-lock AnySSLVPN-TEST value
  type of remote access service
  username admin privilege 15 encrypted password f4JufzEgsqDt05cH
  cluser 3mAXWbcK2ZdaFXHb encrypted password username
  cluser attributes username
  Group-VPN-CA-CLIENTLESS-TEST strategy
  clientless ssl VPN tunnel-Protocol
  value of locking group OLY-Clientless
  type of remote access service
  attributes global-tunnel-group DefaultRAGroup
  Group-CA LOCAL Kerberos authentication server
  tunnel-group DefaultRAGroup webvpn-attributes
  CA-ClientLess-portal customization
  attributes global-tunnel-group DefaultWEBVPNGroup
  sslvpn-pool ip address pool
  Group-CA LOCAL Kerberos authentication server
  tunnel-group DefaultWEBVPNGroup webvpn-attributes
  CA-ClientLess-portal customization
  remote access to tunnel-group AnySSLVPN-TEST type
  tunnel-group AnySSLVPN-TEST general attributes
  sslvpn-pool ip address pool
  CA-group-Kerberos authentication server
  CA-SSLVPN-TEST of the policy by default-group
  tunnel-group AnySSLVPN-TEST webvpn-attributes
  OLY-portal customization
  Disable Group-alias AnySSLVPN-TEST
  Disable AnySSLVPN-TEST-group-alias aliases
  OLY-SSLVPN disable group-alias
  enable SSLVPN group-alias
  type tunnel-group OLY-Clientless Remote access
  OLY-Clientless General attributes tunnel-group
  CA-group-Kerberos authentication server
  Group Policy - by default-CA-CLIENTLESS-TEST
  OLY-Clientless webvpn-attributes tunnel-group
  CA-ClientLess-portal customization
  try to master timeout NBNS-server 10.2.9.23 2 2
  Group-alias Clientless enable
  Group-aka cl disable

  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  class class by default
  Statistical accounting of user
  !
  global service-policy global_policy
  context of prompt hostname
  anonymous reporting remote call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group 3 monthly periodic inventory
  Subscribe to alert-group configuration periodic monthly 3
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:ceea6b06a18781a23e6b5dde6b591704
  : end
  ASDM image disk0: / asdm - 713.bin
  don't allow no asdm history

  Hello

  I'm glad to hear it works

  Please do not forget to mark a reply as the right answer or useful answers to rate

  -Jouni

• "Do you want to activate your reader now?" and lead to "page is not found.

  My computer is a HP Media Center PC running on Windows Vista. When I played a movie Blu - ray on HP DVD play BD and HD DVD, he asked me "do you want to activate your reader now? I clicked on "Yes" and then, it leads to "the page cannot be found" on the Internet Explorer. The URL is http://twdl.cyberlink.com/ftpdload/Patch/PowerCinema/HQP090821-02/TR091102-018/HP-CPC.v7029_2319_HQP...

  What can I do now that I can not play my Blu - ray movie? Thanks in advance for helping me.

  There seems to be some conflicts here and why it does not Blue-Ray, I don't know.

  Uninstall HP DVD Play. MediaSmart installation DVD of the URL given below instead.

  FTP://FTP.HP.com/pub/SoftPaq/sp49001-49500/sp49489 .exe

  Run it, click the file Menu, click on software update and try to play new BD movies.

• Cisco AnyConnect SSL VPN

  Hi guys,.

  I am currently ut setting for the first time on a Cisco ASA 5505 Cisco AnyConnect SSL VPN.

  I enclose my topology.

  I ran the wizard of the ASDM on the ASA2 I want to use for my VPN connections.

  Everything works fine except that I can't access any internal computer servers on my network.

  I do a specific configuration because my servers have a different default gateway of the ASA that I use for my VPN?

  I have since the ASA2 the 192.168.10.0 network.

  my remote ip address of the pool is 10.0.0.1-10.0.0.10/24

  config (I've included what, in my view, is necessary, please let me know if you need to see more):

  ASA 2.0000 Version 8

  Sysopt connection permit VPN

  tunnel of splitting allowed access list standard 192.168.10.0 255.255.255.0

  network of the NETWORK_OBJ_10.0.0.0 object

  10.0.0.0 subnet 255.255.255.0

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.0.0.0 NETWORK_OBJ_10.0.0.0 non-proxy-arp-search to itinerary

  internal GroupPolicy_vpn group strategy

  attributes of Group Policy GroupPolicy_vpn

  value of 192.168.10.20 WINS server

  value of server DNS 192.168.10.15

  client ssl-VPN-tunnel-Protocol ikev2

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split tunnel

  domain.local value by default-field

  WebVPN

  User PROFILE of value type profiles AnyConnect

  type tunnel-group tunnel_vpn remote access

  tunnel-group tunnel_vpn General-attributes

  address ra_vpn_pool pool

  Group Policy - by default-GroupPolicy_vpn

  tunnel-group tunnel_vpn webvpn-attributes

  activation of the Group tunnel_vpn alias

  !

  Thanks in advance!

  Hello

  The unit behind your ASAs on the internal LAN should really be a router switch or L3 and not a basic L2 switch.

  You now have an asymmetric routing on your network, and this is the reason why the connection of the VPN device will not work.

  The problem comes from the fact that internal devices use the ASA1 for the default gateway. When trying to connect to the VPN Client, the following happens

  • Client VPN armed sends TCP SYN that happens by the VPN with the ASA2
  • ASA2 passes the TCP SYN to the server
  • Server responds with TCP SYN ACK for the VPN Client and sends this information to the ASA1 as the destination host is in another network (vpn pool)
  • ASA1 sees the TCP SYN ACK, but never saw the TCP SYN so he abandoned the connection.

  To work around the problem, you need to essentially configure TCP State Bypass on the ASA1 although I wouldn't really say that, but rather to change the configuration of the network so that traffic makes this way to start.

  An option, even if not the best, would be to set the LAN of the ASA2 to ASA1 on some physical ports and set up a new network connection between them (not the same 192.168.10.x/yy). In this way the ASA1 would see the entire conversation between servers and VPN Clients and there are no problems with the flow of traffic.

  But as I said it probably still isn't the best solution, but in my opinion better than having recourse to special configurations ASA1.

  There could be a 'special' configuration on the ASA2 that you could use to make the Client VPN connections operate in their current configuration, without changing anything in the physical topology.

  You can change the NAT for VPN Clients configuration so that the VPN ALL users would actually PATed to 192.168.10.4 IP address when they connect to your internal network. Given that the server would see the connection coming from the same network segment, they would know to forward traffic back with the ASA2 rather than ASA1 like her today.

  If this is not an ideal solution.

  No source (indoor, outdoor) nat static any any static destination NETWORK_OBJ_10.0.0.0 NETWORK_OBJ_10.0.0.0 non-proxy-arp-search to itinerary

  the object of the LAN network

  192.168.10.0 subnet 255.255.255.0

  NAT (exterior, Interior) 1 dynamic source NETWORK_OBJ_10.0.0.0 destination static LAN LAN interface

  Hope this helps

  -Jouni

• Cisco 1841 how vpn tunnels? default 100vpn?

  Hi everyone, I have read the previous posts and I read that the cisco 1841 can manage up to 100 default VPN tunnels.

  1. is this true?  (I enclose my worm of show)

  2. this version of IOS support SSL VPN tunnels as well?

  SH ver
  Cisco IOS Software, 1841 (C1841-ADVSECURITYK9-M), Version 12.4 (3i), VERSION of the SOFTWARE (fc2)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2007 by Cisco Systems, Inc.
  Updated Thursday 28 November 07 18:48 by stshen

  ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

  Uptime SPAREROUTER is 7 minutes
  System to regain the power ROM
  System image file is "flash: c1841-advsecurityk9 - mz.124 - 3i.bin".

  ... Output omitted

  Cisco 1841 (revision 7.0) with 234496 K/K 27648 bytes of memory.
  Card processor ID FTX1151Y0BQ
  2 FastEthernet interfaces
  1 module of virtual private network (VPN)
  Configuration of DRAM is 64 bits wide with disabled parity.
  191K bytes of NVRAM memory.
  62720K bytes of ATA CompactFlash (read/write)

  Configuration register is 0 x 2102

  SPAREROUTER #.

  Thank you

  Randall

  Hello

  I guess that means that the total number of vpn ipsec tunnels taken in charge by the router of SSL VPN AIM is 800.

  If you want only a SSL VPN without the AIM module can it be based on the license.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• SSL VPN using ASA 5520 mode cluster - several problems

  I configured 2 ASA 5520 s in the load balancing cluster mode. I connect using anyconnect and I download the customer the first time and everything works well except outlook. I don't know why outlook does not work.

  The second problem is after the anyconnect client is installed on your machine, he remembers that ASA (say ASA2) he first connected and the GUI shows the address IP of ASA2 instead of the virtual IP address of the cluster. I want users always connect using the virtual IP address.

  The third problem I have is there is a default group of SSL VPN and I want all users to use this group. In the initial web page, there is a drop down menu which shows that this group, but I still want to disable this menu drop-down.

  Any suggestions?

  To disable the drop-down menu, you can turn it off with the command

  WebVPN

  no activation of tunnel-group-list

  This will take care of your last issue.

  ***************************

  You can create a profile of the Anyconnect client with the name of the server you want to connect with and that make the ASA that will solve your problem of virtual IP.

  **************************

  Regarding Outlook, do you use specific ports which allows inspection of the ASA. Take a look at the list of inspection on the SAA and perhaps try to disable inspection and see if it works.

  *****************************

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• Try to customize login page for ASA 5505 SSL - VPN

  Nice day

  I'm looking for help to customize the login page for the ssl - vpn as mentioned. When the vpn is configured, the default template allows my customers to connect with this: IMAGE 1

  

  While trying to change the login page, I have to create a new customization without CLIENT SSL VPN ACCESS-> PORTAL-> CUSTOMIZATION file in the ASDM. When I do this and I'm trying to change the login page, it comes up with 2 forms of authentication and a fast internal password like this: IMAGE 2

  

  How can I change the login page, I created so that users only see the fields username and password for regular as the default template?

  Thank you all for your time and assistance

  Joel

  Hi Joel,

  What you see is just the preview, right?

  Preview displays the purpose of customization, since the password internal and the second authentication controls are the features that are activated in different parts of the configuration.

  WebVPN

  allow outside
  

  internal-password enable

  !

  attributes global-tunnel-group DefaultWEBVPNGroup
  

  secondary-authentication-server-group second_authentication_server

  
  

  INFO: This command applies only to the SSL VPN - Clientless and AnyConnect.
  

  So I recommend to assign this object of customization to a group policy and test access to the content of the specific connection profile.

  Thank you.

  Portu.

  Please note all useful posts

• AnyConnect SSL VPN Split tunneling problem

  Hello

  We have home users that VPN in on a regular basis, but when they VPN in they cannot print locally or to connect to local resources.  Is there a way to activate the split for all remote users VPN tunneling?  It is not possible to add all the remote subnets, especially since I don't know which subnets are used and it would be a question of management.  I noticed that when I connect to the House a new route is added to my PC, who prefers the VPN link.

  I noticed one of the options with the client Anyconnect is 'enable local LAN access (if configured) '.  Can I use?

  Thanks in advance.

  Hello

  According to my understanding, you need to connect to your local printers while you are connected to the ASA via SSL VPN.

  You can do this by creating a policy of exclusion of tunnel split on SAA and the local lan access on the client option, or you can use the profile AnyConnect allowing local lan access.

  Please find the link below: -.

  https://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702992.shtml#dsfg

  I hope it helps.

  Thank you

  Shilpa