Start and run the OS from USB Thumb Stick

Similar Questions

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• Mini Mac; Windows can be installed on the SDXC card to start and run windows

  I was wondering if I could install Windows 10 to the SDXC card slot and run the card SDXC of Windows?   I rarely use Windows and I would ' t need you worry too much space Mac.  I thought I could unplug the unit out of the machine most of the time, leaving the slot for use with other storage devices so that I do not use Windows.     My HARD drive is full & I thought it would be nice to have a Windows machine that would not take more space on my HARD drive.

  Mac Mini (late 2012) 2.5 GHz Intel Core i5 with 4 GB of memory running with OX El Capitan 10.11.1

  No, but you can try cloning once installed on the internal drive.

• Very slow start and run for Dell Inspiron 6400 XP times

  "I have a problem with an Inspiron 6400 brought to ' horribly slow start and run time.  XP Pro 32 bit SP3 patched up to date.  Cleaned up a lot of "undesirable", as the partially uninstalled programs, cleaned the files temporary etc. with CCleaner, cleaned and optimized the registry afer all the cleaning has been done, defragmented, tried to start without any of the boot files, disabled all unnecessary services and uninstalled virus checking software, (but ran several anti-virus controls) etc. - no help.   Safe Start Mode is faster, but... not at all normal - 1 1/2 minutes of screen to logon instead of close to 3 minutes.  A lot of memory (2 GB), which rises to 600 to 700 MB runnng all the stuff I've tried.  Hard drive is 1/3 used out of 120 GB with a 2 GB swap file.

  One thing I'm still scratching my head over - beyond the horribly slow boot - is very slow access to files even though everything seems to work normally, but as molasses in January.  Looking at the performance of the Task Manager tab when I run a copy of a file (whether via a cmd window or with Windows Explorer), I see a near max processor would be and the other with a small business.  Even if the customer says he had been getting worse for some time, after checking and cleaning of all things 'normal', my next thought was perhaps a bad disk or disk controller driver, but chkdsk ran very well (although it took hours) even if I ' d I have already updated all drivers (and even the DVD firmware and BIOS) on the Dell web site.  Oh, and I ran Dell Diagnostics (from bootable CD) updates all with no errors found.  And access to the slow file even with symptoms had max-processor occur with a copy of the file on a USB key that seems to eliminiate the hard disk, the disk controller and the pilot.

  The other interesting part of the display for a file copy task manager is that the processes tab simply shows System Idle 97 to 99%, with a percentage of casual for other processes as Explorer while I see 1 max out procesor on the performance tab.  That the same copy on your desktop shows 3-4% of the CPU usage and who is with active antivirus software.  I'm almost ready to fall toward a Windows reinstall, but would like to find the real reason behind this problem of puzzle...

  It of almost as if he's using PIO instead of DMA disk access, but... don't know how/where to test this.

  Look at:

  http://Windows-XP-tricks.com/direct-memory-access-DMA-on-IDE-hard-drive.php

  and

  http://winhlp.com/node/10

  Solved!   Thanks for the links, especially to each other.  An old but still a goodie!

  For those who have enquring spirits (and anyone else who stumbles across this thread), the primary IDE controller has been set to PIO and locked it.  Who would have thought that Windows slowly reduced the transfer speed, whenever he saw 6 errors on an IDE device until it has been reduced to PIO and then he locked it?  But the procedures described in the link of winhlp.com showed how to solve the problem.

  There are actually several problems that led to the final symptoms.  According to KB817472, the Atapi.sys has been improved in XP SP2 only degrade the speed of transfer on 6 consecutive errors instead of 6 cumulative errors.  And even though everything I have (Microsoft update) was seen and showed that this area was to SP3, I found that the driver for the controller layer IDE was the SP2 version.  Someone ran sfc previously perhaps?

  Oh, and I know now that the Task Manager process tab does not time processor kernal, but the performance tab.  Good to know...

  Thanks again to all who have responded.  Starting at the time of connection-question now is 40 seconds.   You'll love Untra DMA mode 5.   There is still a lingering question in my mind, since I've had the same symptoms of slow copy of a file on a flash drive.  Perhaps a link in some way to the way that Windows treats a flashdrive as a "drive"...

• Run the utilities from disk on machine with Yosemite Snow Leopard startup disk?

  I have a 2009 imac that came with Snow Leopard. I've since updated my OS to Yosemite. Should I run the disc from my old snow leopard startup disk utilities or is it a bad idea?

  It is not a 'bad' idea, but it is always best to use the version of disk utility which is part of the OS version installed. Do this by starting the computer from the Recovery HD.

  Fix the hard disk and permissions

  HD recovery start

  Restart the computer and after the chime hold the Order et R keys until the Menu of the utility is displayed.

  Repair

  When the Utility Menu appears, select disk utility and click on the continue button. Disk utility charges and select layouts withdrawal (usually Macintosh HD) entry of the list to one side.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait for the process to finish, and then quit disk utility and re-enter the Utility Menu. Select restart from the Apple menu.

• Deploy and run the part of the project in real time RT

  I am developing a project, LabVIEW-RT, with a User Interface on the PC and evanescent code that runs on a PXI system.  I read a few posts discussing the possibility (or lack thereof) to start the RT of the project by program part.  Here's what I mean: my project has a first level VI on the host PC, call 'Host UI.vi', and a first level VI on the RT target, call it "target RT.vi".  There is the usual assortment of other features of the RT, such as flow, LAN and network Variables shared, etc.

  During development, I open the project, find the code RT target, select the target RT.vi and click Run.  I can do the same with the host UI.vi.  My code works (or not, depending on whether I have introduced new bugs).

  What I would like do is to run the host user interface and run the code to mimic an RT target selection in my project and perform a right-click.  I partly managed, but a small step escapes me.

  Can I programmatically deploy my RT code and make it pop a window front so I can click on the Start button.  I even managed to start running programmatically using VI server.  However, when I start it programmatically (rather than clicking Run), my shared network Variables are not available.

  I studied it a bit by using Distributed System Manager.  With her, I can 'see' my shared Variables of network on the target of the RT, but its status is offline.  I put online by clicking on the button 'Start process' in DSM, however, when I then try programmatically start my vi target RT using VI Server, Shared Ntwork variables goes Offline (accordint DSM).

  Question - is there a way to do a program equivalent to locate my network shared Variable in DSM and clicking on start processes?

  [I had a great idea while writing this post.]  I have noticed that if I deployed my VI and also expanded my network shared Variable, DSM has shown to be online, but the target RT start VI VI Server, the NSV went offline.  What happens if I have deployed it after from the remote?  Good idea, too bad that it didn't work...].

  All the best ideas?

  BS

  Well, I just did!  I wrote a demo project RT with the following characteristics: RT side consists of a single VI that affect False in a Boolean Variable (NSV) shared network, goes in a while loop until there is true, goes into an another wait loop to make it False, then ends.  The NSV is hosted in a library on the remote target.

  The host does the following:

  1. Determine the IP address of the target of the project.
  2. The first name of the VI RT to run, to return a reference to it.
  3. Use the reference to deploy the RT VI on the remote target.
  4. Use the IP address and the name of the RT VI for a VI Server reference.
  5. Use the reference to start the code that runs on the target of RT.
  6. Go in a loop looking at the NSV and wait for the status of the error not be 8BBB0006 (uninitialized NSV).
  7. With the value returned by the NSV (must be set to False, defined by the code of RT), deny it, set it and wait that it will change.
  8. Do this one more time to return the NSV to its original value (as defined by the code of RT).

  Before running the code, right-click on the target of RT in the project and turn on "disable AutoDeploy Variables.  J of Zach, an Applications Engineer of NOR, suggested that this step, which can be the key step in the resolution of this dilemma.

  To test this, I restarted my PC and the aim of RT.  Once both had restarted, I opened the project on the PC, and without interaction with the section the project somehow RT (including not not clicking 'Connect'), I ran the host code.  He started the remote code and was told that the round trip time for set and reset my NSV was about 29 msec.

  I intend to make a full text of this and submit the entire project, with documentation and all the screws under utility, I used, to community page OR.  I'll try to get this done this weekend...

  Bob Schor

• TRYING TO PLAY THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  Original title: papabob68

  have windows 7-

  I'M PLAYING THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  After that, I have to go to master to stop and start again... I have read all the post I can find and I updated the driver and reset the display and SO ON, SO ON, AND...

  I played this game on windows xp and I have done everything but put A BULLET in it and I think about IT!

  I'd be willing to by a new game made for windows 7 but does...

  MANY OF THE POST TALK ABOUT A 64-BIT SYSTEM, BUT MINED IS A 32-BIT, SO THERE HAS NOT BEEN TWO MANY ANSWERS...

  "HELP!" @!@!

  PAPABOB68

  "I updated the driver and reset the display and SO ON, SO ON, AND ON...". »

  It is better to translate 'SO ON'... to something specific, or you can read suggestions for

  have you tried things once again.

  -Include your brand of processor graphics and model as well.

  -The best place for the hotfixes to vintage games is usually on a specific to this game fan site,

  or the developer forums, but...

  "but mine is 32 bits"

  (Assuming you are using the disk depending on the version of the game.)

  -A 32-bit Windows can be an advantage with some games of this vintage (release date of 97) as

  always use a 16-bit Installer, which will run on 32-bit but not 64-bit of Windows.

  Apart from that, there should be no difference between the OS versions for compatibility.

  -However, prior to version 2000 games (and some newer), may have other

  questions that make them run poorly. Audio and color are two common problems.

  -The camera may result from a problem with earlier versions of Open GL, Direct 3D.

  DirectPlay and Glide3D (gone, but not forgotten) can be a problem sometimes too?

  These questions sometimes have patches on based fan sites.

  -Some 97 games maybe still based back that requires using the window BACK, an emulator "BACK."

  Good old games sells some vintage games with DRM (copy of code protection) removed, and installs

  with BACK box automatically.

  They have Panzer General 2 for $10 USD, but if you expect one of their frequent sales you should be

  able to pick up for US $5-$ or less.

  http://www.Gog.com/

  [ EDIT: just watched add it, and it seems to be a DirectX game 9] It must have been updated DX9

  for the downloadable version.

  It can been Direct3D when released.  DX 9 was not released before 2002

  -All on the theme of DirectX. If you have not updated DirectX, you should do it.

  Win7 is not the most recent DX 9, 10 or 11 files when first installed.

  Download installer Web Runtime DirectX end-user of the official Microsoft Download Center ]     

  -You can also use D-Fend Reloaded, which is a user interface that reduces the learning curve for the DOS window.

  The download includes the box and a few BACK based games start practicing.

  D - Fend Reloaded: overview

  Finally, and above all by an effort... An important announcement for all users of the disk based games.

  -A new (since Win10) problems with the old disk based games comes from malicious software developed by MS - DRM blocking.

  If your disc games has a file called - secdrv.sys - on it, the game will be blocked by a

  Windows 'security update' - KB3086255-.

  I have more information about the blocking of the DRM, including how to work around this - here -

  .

• Shockwave Flash Crash and "running the server failed WMP".

  Hello

  I have a laptop HP that used Vista. I recently decided to install Windows 7 on it a week ago, but I've had problems since.

  I find that as a first step, I would like to watch YouTube and he played very well. However, after a few hours, Youtube should take a break and pop would be a mistake, saying that Shockwave Flash broke down. This error occurred on all browsers (IE, Firefox, Opera, Chrome etc.) and the mistake of Shockwave Flash would be visible on all streaming media sites.

  I decided to play music on WWP but she also crashed and said that "Server execution failed". So I decided to restart my computer and everything worked again. My videos played WWP fine and so does Youtube.  I decided to continue to watch videos on youtube and listen to music on WWP until both started to freeze and the error occurred again. I would continue to reboot my computer and the same trend happen. Obviously, the error for Shockwave Flash Plugin crash and error running server on WWP are linked so I hope someone can help me solve this problem.

  I tried re-installing and do a lot of things that I found here on the forum to see if they can help, but none of the solutions worked. If anyone can help me, I really appreiate it! I'm not a fan of Windows 7 so far, especially with these errors, so I hope to fix it soon!

  Thank you so much in advance!

  Hi fallenenvym,

  1. try to uninstall Adobe flash player and shockwave player from your computer and reinstall on the computer after restarting your computer.

  To uninstall the Flash player and shockwave player, you need to follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Follow the links below to download the Adobe flash player and shockwave player on your computer.

  http://kb2.Adobe.com/CPS/142/tn_14224.html

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  2. for the execution of the server failed error

  a. Click Start and in the search bar type cmd.exe

  b. right-click on cmd.exe and click Run as administrator

  (c) in the command prompt, type the following command

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  d. press on enter and restart the computer

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Start and all the missing icons in the Office how can I recover them?

  After downloading Microsoft 6 to 8, the bar start and all the icons disappeared from my office.

  How do their back on again once?

  Hello

  Method 1:

  Follow these steps and check if that helps:

  (a) start on your desktop.

  (b) press CTRL + ALT + DELETE to open the Task Manager.

  (c) in the Task Manager, click on the button new task on the general tab.

  (d) in the new task dialog box, type: ' Explorer to. exe' (without the quotes) and press OK.

  (e) the Office Windows should now appear.

  Method 2:

  Follow the steps in the article, and check if that helps.

  Your desktop icons are missing in Windows XP

  http://support.Microsoft.com/kb/330170

  Method 3:

  Also try creating a new administrator account and check if it helps.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• Where can I find a list of services that XP Professional needs to start and run successfully without loading unnecessary things?

  I seem to have a long boot of extradanry sequence. I checked with the listing services under administrative tools, and according to the list that appears, I have excess of 127 or so listed services.  Some are in automatic mode, some are on manual, none are disabled.  My question is, where can I find a list of services that XP Professional needs to start and run successfully without loading any of this filth?

  Yes, I understand that some of this "gunk" is things I need for installed applications, but I'll sort that once I put my minimal optimal operating system to boot the system.

  I appreciate the help.

  * original title - "Minimum started for xp services."

  Here is where you can find what services should be automatic, manual, or disabled according to your needs. It is really useful.
  Source: http://ss64.com/nt/syntax-services.html

  I hope that helps!

• Installation Wizard downloads and runs the HP printer

  Learn how to download and run the wizard to install printer HP (PIW). Printer Installation Wizard allows to solve many common installation problems, such as finding the correct driver for your printer, using your HP printer the same way that you used with your old operating system. Printer Installation Wizard is not available for all products, only works in Windows 7 and Windows 8, and you connect your printer to your computer with a USB cable to run the wizard. For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support. This video was produced by HP.

  I hope you find this information useful.

• Tried to build and run the "QXmlStreamReader" project, but the display of the device debugging errors] error 2, no rule to make target "main.cpp", need to "debug/main.o.

  I have tried to build and run the project "QXmlStreamReader" with momentics

  but display as errors

  The path location type Resource Description
  make: * [Device-Debug] problem error 2 QXSRExample C/C++
  make [2]: * no rule to make target "main.cpp", need to "debug/main.o.  Stop.    QXSRExample C/C++ problem
  make [1]: * [debug] problem error 2 QXSRExample C/C++

  My project is to

  CBC

  main.cpp

  qxsrexample.cpp

  Inc.

  qxsrexample.h

  assets

  hand. QML etc.

  Reference: http://qt-project.org/doc/qt-4.8/qxmlstreamreader.html

  And

  http://developer.Nokia.com/community/wiki/QXmlStreamReader_to_parse_XML_in_Qt

  I posted a few snippets on the forum some time ago, maybe they are useful:

  https://supportforums.BlackBerry.com/T5/native-development/how-to-parse-XML-data-coming-from-server-...

• Start Media Player to start and play the songs in a folder only.

  I have Windows 7 business, Windows Media Player version 12.0. I want Media Player to start and play some songs from group in a directory only. How is that possible? And be able to extinguish easily.

  Several steps but each one is simply that your employer [who provided your Windows 7 Enterprise Edition] did not in the group policies that inhibit the task.

  1. open WMP

  2. create a playlist containing the songs you want to play

  3 go to the folder selections - by default, this will be the C:\Users\yourusername\Music\Playlists

  made 4 right click on the relevant Playlist, select Create a shortcut [then rename the shortcut if you wish]

  5 Ctrl-x to cut the shortcut

  6. click on the Start button and then right click on the words, all programs at the bottom, and then select Open

  7 navigate down through programs in your Startup folder to

  \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\StartupyourusernameC:\Users\

  8 Ctrl + v to paste the shortcut it

  Note that you will be able to change the list of reading as much as you want as long as you do not change its name.

• Import and delete the photos from the camera

  The link you gave is not useful. I don't want to use the application Windows 8 photos. All I want to do is to plug my camera and have pictures, transfer in a folder of my title and delete the photo from my camera. It's an ability that were available in Windows 7 and not available in Windows 8. I am currently using Dropbox and it is slow and uses tons of data to my hotspot.

  Thank you!

  Split from: https://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/importing-and-erasing-photos-from-camera/d8ad55da-66e7-46d5-b54e-3ef0bf45e986

  Hello Joe,

  Thanks for posting your query in Microsoft Community.

  I understand that you have questions, import and delete the photos from the camera. We are happy to help you in the matter of fixing.

  You can check the below link to import photos from the camera.

  1. First, connect your digital camera, and press the Power On button. Windows 8, which will detect the camera and will install the appropriate drivers.
  2. After the driver installation is complete, the AutoPlay menu appears.
  3. Select the option import pictures using Windows.
  4. In the lower right corner of the screen, a small window asking if you want to mark photos will appear. You can type a general images you want to import. Tags can be very useful to organize and find your photos.
  5. If you do not want to insert a tag just leave this space empty and click Import.
  6. If you want to customize the import settings, click the Options button. Now you can change the following settings: where pictures import them (the default folder is pictures - if you want another folder, click Browse and select or create this folder), the name of the folder (by default the name of the folder will be the date when the images are imported over the tag you entered) and the file naming convention.
  7. When you are finished, click the OK button. These settings apply to all the photos you want to import in the future.
  8. After you click import, Windows 8 starts to move all your photos.  If you want the pictures to be removed from your camera once the import process is completed, click the Delete after import check box.
  9. Once the process is complete, start Windows Photo Gallery and you will be able to see all the photos that have been imported.
  10. Now, turn your unit off and unplug the cable to connect to your PC.

  If this does not help then, try the steps below to get the images from the camera.

  1. Go in computer.
  2. You will find the camera under portable device or removable devices.
  3. Double-click on this unit and you can copy and paste from this location and import it onto your computer.

  I hope this helps. Otherwise, feel free to write us back for assistance.

• Build and run the illustrator of samples in xcode?

  Hello

  I'm trying to build and run the samples of illustrator using xcode. For that, I am following the steps in the document "getting started with adode Illustrator CC 2015 development", but I'm having a problem in compiling and linking a file 'BuildAll.xcodeproj'. My screen shows me this message:

  «error: there is no SDK with the name or the path "/ users/mbaz/Desktop/Adobe Illustrator CS5 SDK/samplecode/MasterProjects/macosx10.5'"»

  How can I solve this problem?

  Thank you

  The sulution to this problem to just update a pluging.