Start little problem-ORA-07446: sdnfy: incorrect value "for parameter

Similar Questions

• Incorrect value for PERM in TUXCONFIG

  I get incorrect values of PERM in TUXCONFIG. I did not define PERM in my UBBCONFIG file so ideally, its value must be 0666 in the TUXCONFIG file. After tmloadcf running - there, I'm like value of PERM 0600. TUXCONFIG file generates also with 600 permissions. Is there something I miss or are there changes I need to make in UBBCNOFIG?

  I use 12.1 Tuxedo.

  Hello

  Sorry about that.  The default value has been changed some time back and apparently as part of the documentation was missing.  Normally the best place to see the default values in the description of the file UBBCONFIG.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• I get an incorrect value for the MIN function?

  Hello
  
  I get an incorrect value when I run the query below. Here, I'm getting the minimum of the two values. I use the function table of pipeline. This split function the comma separates into single value string. Actuatlly of the sub query min value is 956.23. But he's back 1002.56 as min value. How is it possible?
  
  Other wise, is there another way to get the min of comma-separated string value?
  

  SELECT  MIN(COLUMN_VALUE)
  FROM    TABLE(get_string_comma('956.23,1002.56',','));

  Hello

  I understand your situation, try:

  SELECT  MIN(to_number(COLUMN_VALUE))
  FROM    TABLE(get_string_comma('956.23,1002.56',','));
  

  Kind regards

• Invalid value for parameter error when the value is in the list of the parameters allowed

  I have a few documents with many styles of paragraphs which have been organized in groups. I have a simple script that aims to decouple these styles and remove groups now empty.

  Code:

  #target indesign
  
  
  var myDoc = app.activeDocument;
  
  
  if (myDoc.paragraphStyleGroups.length > 0)
  {
      myDoc.paragraphStyleGroups.everyItem().paragraphStyles.everyItem().move(LocationOptions.AT_END, myDoc);
  
  
      myDoc.paragraphStyleGroups.everyItem().remove();
  }    
  
  
  alert("Done")
  
  

  The error I get is (my highlighting):

  JavaScript error!

  Error number: 30477

  Error string: invalid value for the "reference" parameter of method "move". ParagraphStyle waited, ParagraphStyleGroup, CharacterStyle, CharacterStyleGroup, CellStyle, CellStyleGroup, TableStyle, TableStyleGroup, Document or application, but received Document.

  As you can see, my Pickle is my value is of a type allowed. This only happens in certain documents, and there is nothing that distinguishes these documents from those in which it works of course.

  One thing I noticed is that the error sometimes manifests a while to appear (a minute or two), but none of the styles have been moved once I click OK. So, I don't know if this is specific to a single style. I doubt it, just because other documents with the same style the value of work.

  Anyone can shed light on what this error can mean in this context? I have certainly an activeDocument, so what could cause a Document to a Document?

  Any help much appreciated!

  Hello

  It occurs when there are 2 or more models have the same name, probably.

  Jarek

• Incorrect value for analog output USB-6008. Cannot not out more than 3V

  I use USB-6008 analog IO, but the analog output (AO0 or AO1) can go up to 3 - 3.5V. The output can follow accurately the value of 0 to 2, 5V, but then he start the values adjusted trolling and not can not spend you 3.5V exponentially.

  The only strange thing the entire circuit is that I connected all patterns (analog source and I/O 5V) between them, but I don't see what affect the output.

  Kind regards

  ISSOKO

  Thanks for the quick reply Ana.

  It is not the Council NOR, nor the Council of motorization. Apparently, the interface for motor control (motor spirit C: solutions - cubed.com), load the analog output. A tension following actually isolated op amp output USB-6008 and solved the problem.

  Best regards, ISSOKO

• Channel indicator displays an incorrect value for Enum

  Hello together,

  I have a LabView 2012 application, running for years in our production.

  For the visible operator, an "Active State" text indicator shows the current status, for example "Press Start Button"...

  From time to time I am facing following problem: the content of the indicator is false. It shows the former State as "Label printed,"

  While the machine is in the next "Press Start Button" State.  Attached is a simple piece of code.

  Any idea?

  

  I don't see anything obviously wrong in your second code example, but since it is not your current system, there might be a bug here that is not visible in the example.

  Other relevant points:

  1. I guess it is possible that the Text property does not actually reflect the updated text. It's obviously supposed to, but I've seen a few bugs in this kind of things.
  2. You could probably just display the enum on FP.
  3. If you do not look like that, I would say by using it in Format string to convert enum to a string, rather than reading the Text property.

• How can I fix my Windows 7 file association problem and set the default values for the correct file?

  Files do not open the appropriate program

  The simplest is to restore your system settings for a time before the invalid associations have been set.

  1 type the word restore in your Start menu, then choose restore system files and settings...
  2 - Click Next, choose a date before the problem happens again, and then click Next
  3. about 2 minutes later, you're all set.

• stage.stageHeight gave an incorrect value for the iPhone 5.

  Hi all

  We tested our existing applications on the iphone 5 and found that the scene. StageHeight is still given the value of the iphone 4 960 instead of 1136.

  Our existing application was built in FB4.6/Air3.1.

  There is no work around for this problem.

  Thanks in advance.

  In order to target the iPhone 5, you will need to use AIR 3.5 beta or AIR 3.4

  pointing to iOS SDK 6. Be sure to include the [email protected] of

  trigger the size of iPhone 5. In other words, the application shall be

  targeting the iOS SDK 6 and have the new png by default to trigger the full

  size on the iPhone 5.

  3.5 AIR beta includes the bits that target iOS 6 SDK, but you can

  target iOS 6 3.4 air using the external path of SDK in the package

  Prompt DONKEY in FB 4.6

  http://labs.Adobe.com

  iBrent

• Incorrect value for its use of virtual computer memory in Virtual Center

  Hello everyone

  I have a problem to track usage of the memory of some virtual machines in Virtual Center.

  The virtual center of the opening interface is reported to me that virtual machines have a use of memory about 95%. Accessible through the console of the machine, however, the Task Manager shows me a memory about 15-20% and 4% of the processor usage.

  The machines in question are among other the domain controller is working correctly.

  Thanks in advance

  Hi dmilazzo,

  I had this problem a few weeks ago. After updating my ESX hosts, this problem has been resolved.

  Are yours up-to-date?

  René

  ---

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

  ---

• Capabilities.screenResolutionY returning an incorrect value for the iPhone5

  Hello

  I'm trying to make gui adjustments based on the values returned by flash.system.Capabilities. However, when I test on the iPhone5 in portrait mode the values returned are screenResolutionX: '640' and screenResolutionY: '960'. I am compiling with air 3.5 in renderMode: "gpu" and put the swf metadata tp widthPercent: 100% and the heightPercent: 100%. I'm doing something wrong?

  Thank you

  CJ

  To get the right size, you will need to include a splash screen for the size of the iPhone 5, with the name of "[email protected]". This image would be 640 x 1136, and when he sees iOS, it knows that you want the iPhone 5 to use the entire screen.

• Default value for parameter

  Hello
  
  I have the query which is having two parameters. A parameter will be filled by the user and the other should be taken implicitly.
  
  date, IE that is entered by the user - January 1, 2010, then another parameter should not be prometed to the user and it should be interpreted as "year of parameter passed" - 1.
  
  Thus, in this case date = January 1, 2010 and year = 2009 (implicit).
  
  I used sys_context for the date that is passed by the user. I tried using substr (sys_context (), 'year') in the request (personal folder), but it does not work.
  
  How to implement this situation? Please help me.
  
  Thanks in advance.

  Hello

  You say "I used sys_context for the date that is passed by the user. What date format is in the area of the SYS_CONTEXT? If the date is in the format DD-MON-YYYY text, you can then use a calculation such as:

  an = TO_CHAR (ADD_MONTHS (TO_DATE (SYS_CONTEXT ('YOUR_NAMESPACE', 'DATE_CONTEXT_NAME'), 'DD-MON-YYYY'),-12), "YYYY")

  on a date, who translated the SYS_CONTEXT value, subtract a year, then convert back to a string containing only the part of the year of the date.

  Rod West

• Problem of null values for the Variable

  I work with APEX 4.0.  I have a menu page that has a list item widget types to select.  I then a navigation list that calls a report page and sets a widget-type element with the value of the widget on the page called - type element.

  Problem is that type widget on the page called article does not meet.  The report depends directly on this issue being filled.  The url indicates the element in the form of Pxxx_WIDGET_TYPE, but the value for parameter & Pxxx_WIDGET_TYPE. is set to null.  I am also an element of Pxxx_CALLED_FROM filling, which fill, and the url shows the value of & APP_PAGE_ID.

  What's wrong?  How to fill the element of widget_type?

  How do you define value for Pxxx_WIDGET_TYPE? And is there a value in the session state for this item?

  Kind regards

  Vincent

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Problem CS5: merging HDR Pro & EV incorrect values

  Hello

  I try to use the HDR Pro on Photoshop, but have not yet find a way around a problem I encounter.

  The game Gran Turismo 5 3 Playstaiton has a photo and you mode allows to edit the parameters of the camera in the game and then export your image. When you open the images with Photoshop, a message appears informing you Photoshop data file is maybe damaged. You can choose to ignore this and the image appears as usual.

  The real problem occurs when you take photos with different exposure settings and then try to use the option "Merge to HDR Pro. For some reason, the values embedded in the files are incorrect. I took three pictures, the picture of high level was-3,0 exposure value seen in HDR Pro, which is obviously false, and the normal and low level photos both had a value of 0.0. Of course these confused values cause the whole process of HDR to go bad horrible, as shown here:

  http://i53.Tinypic.com/euh7ra.jpg

  Photoshop support pages inform me for files with missing values EV, can I put them manually, however there is no option for files with incorrect values. Is it possible that I can change the settings manually? Either through Photoshop or editing files elsewhere?

  Thanks for any help.

  Yes, there are the editing/display EXIF utilties.

  You can hand or change the hexadecimal numbers in the file (if you know how).

• Values for timestamp default XMLTable causes ORA-01843: not one month valid

  When I try to provide a default value for a timestamp value in the function XMLTABLE, I am greeted with an error - ORA-01843: not one month valid -no matter how to give this default value. If there is a value in the XML or not is irrelavant to this bug occurs. It seems to be an incomplete correction of bug number 9745897 (thread).

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype ("< DOC > < DT > 2013-08-14T 15: 08:31 < /DT > < / DOC > '"))

  DT COLUMNS timestamp default sysdate) x;

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype ("< DOC > < DT > 2013-08-14T 15: 08:31 < /DT > < / DOC > '"))

  By default systimestamp timestamp COLUMNS DT) x;

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype ("< DOC > < DT > 2013-08-14T 15: 08:31 < /DT > < / DOC > '"))

  DT of COLUMNS timestamp default to_char (systimestamp, ' ' YYYY-MM-DD "T" HH24:MI:SS)) x;)

  Edit: somewhat more followed.

  It works:

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype ("< DOC > < / DOC > '"))

  Date of the dt of COLUMNS by default sysdate) x;

  It works, too, with the exception of its just the date and not the time

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype ("< DOC > < / DOC > '"))

  DT COLUMNS timestamp default sysdate) x;

  It does not work

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype ("< DOC > < / DOC > '"))

  By default systimestamp timestamp COLUMNS DT) x;

  ORA-01861: literal does not match the format string

  Hello

  First of all, let's check the manual for the DEFAULT clause:

  Function SQL/XML XMLTABLE in Oracle XML DB

  The optional parameter DEFAULT clause specifies the value to use when the PATH expression results in an empty sequence (or NULL ). His expr is an XQuery expression that is evaluated to produce the default value.

  According to the documentation, the DEFAULT clause must specify an XQuery expression.

  However, is false, the implementation only expects an expression that matches a string, the content is not interpreted.

  Bottom line is, if we specify directly a string, the expression is implicitly converted into one, and everyone knows how things can go when implicit conversions appear, especially when the dates or timestamps are involved.

  Now let's focus on the impact of the DEFAULT clause on the evaluation of the query.

  When a DEFAULT clause is specified, Oracle has rewritten projection differently and does not use the native format of XS: DateTime to convert the value:

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype ('))

  2013-08-14 T 15: 08:31

  ')

  DT of COLUMNS by default systimestamp timestamp

  ) x

  becomes:

  SELECT THE EXISTSNODE (VALUE(KOKBF$), '/ DOC/DT')

  WHEN 1 THEN LAUNCH (TO_TIMESTAMP (SYS_XQ_UPKXML2SQL (SYS_XQEXVAL (SYS_XQEXTRACT (VALUE(KOKBF$), '/ DOC/DT')), 50.1, 2)() as a timestamp)

  ELSE CAST (TO_TIMESTAMP (TO_CHAR (SYSTIMESTAMP (6)), 'SYYYY-MM-DD "T" HH24:MI:SSXFF') AS timestamp)

  END "DT".

  TABLE ("SYS". "XQSEQUENCE"(EXTRACT ("SYS"." XMLTYPE"(")

  2013-08-14 T 15: 08:31

  (((,'/ DOC'))) ' KOKBF$ '.

  See the red part: it does not use the format parameter, the conversion depends on NLS session parameters.

  When there is no DEFAULT clause, the TO_TIMESTAMP function uses an explicit format:

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype ('))

  2013-08-14 T 15: 08:31

  ')

  Dt timestamp - default systimestamp COLUMNS

  ) x

  rewritten to:

  SELECT CAST)

  TO_TIMESTAMP)

  SYS_XQ_UPKXML2SQL (SYS_XQEXVAL (SYS_XQEXTRACT (VALUE(KOKBF$), '/ DOC/DT'), 0,0,20971520, 0), 50.1, 2)

  "SYYYY-MM-DD"T"HH24:MI:SSXFF"

  )

  BY timestamp - default systimestamp

  ) "DT".

  TABLE ("SYS". "XQSEQUENCE"(EXTRACT ("SYS"." XMLTYPE"(")

  2013-08-14 T 15: 08:31
  (((,'/ DOC'))) ' KOKBF$ '.

  So yes, maybe there is a bug here.

  Edit: somewhat more followed.

  It works:

  Select x.*

  Of

  XMLTable ('/ DOC' from xmltype (""))

  Date of the dt of COLUMNS by default sysdate) x;

  Actually no, it does not work. Certainly, maybe it produces no error, but the result is incorrect.

  As explained, the conversion is based on the NLS (NLS_DATE_FORMAT in this case) session:

  SQL > show nls_date_format settings

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  string of NLS_DATE_FORMAT JJ/MM/RR

  SQL >

  SQL > select sysdate to double;

  SYSDATE

  --------

  16/08/13

  SQL > select x.*

  2 from

  3 xmltable ('/ DOC' passing xmltype (""))

  4 COLUMNS dt date default sysdate) x;

  DT

  --------

  13/08/16

  Oracle first converts SYSDATE to a string using current NLS_DATE_FORMAT, having for result Aug 16, 13 '

  Then this string is converted to a DATE as XS: date is 'YYYY-MM-DD' leading 13/08/16 (13 August, 0016) which is incorrect.

  The obvious solution to this problem is to control how Oracle converts implicitly string to timestamp format:

  SQL > alter session set NLS_TIMESTAMP_FORMAT = "YYYY-MM-DD"T"HH24:MI:SS."

  Modified session.

  SQL > select x.*

  2 from

  3 xmltable ('/ DOC' from xmltype ('))

  2013-08-14 T 15: 08:31

  ')

  4 dt of systimestamp default timestamp COLUMNS

  (5) x;

  DT

  ---------------------------------------------------------------------------

  2013-08-14 T 15: 08:31

  SQL > select x.*

  2 from

  3 xmltable ('/ DOC' passing xmltype (""))

  4 dt of COLUMNS by default systimestamp timestamp) x;

  By default systimestamp timestamp COLUMNS DT) x

  *

  ERROR on line 4:

  ORA-01861: literal does not match the format string

  SQL > select x.*

  2 from

  3 xmltable ('/ DOC' passing xmltype (""))

  Cast of default timestamp COLUMNS dt (systimestamp timestamp) 4) x;

  DT

  ---------------------------------------------------------------------------

  2013 08-16 T 12: 32:58