Start of Bug!

Similar Questions

• 10 Windows start menu bug-Predator G9-591

  

  Hello acer community,

  I seem to have this bug on my windows 10 pro. It happened when I got home too. Whenever I press the start menu, it shows the normal color, I chose, after I press something on it, as all applications or power, it goes darker. If I move my mouse over the start menu it goes even darker. I tried to restore it and others.

  Please y at - it solution

  Finally, I found a solution to your problem. No need to reset factory no need to full reinstall. The problem comes from your Intel HD graphics driver, does not solve the problem in my old laptop se I just disabled the 3D settings without knowing this would fix it. As you use the integrated graphics card which means the correction might also work for you also. Go to intel hd graphics control panel and then turn off the 3D settings. I have no graphics built-in so I can't show you which setting, you must turn off exactly, but the first start by disabling all the and if it does start turning on one by one to see exactly one must be turned off.

  Also update the Intel HD graphics driver to the latest version.

• Visual Studio 2013 installed on Windows 7 may cause bug control in the NTFS driver?

  Hello!

  I installed Visual Studio on Windows 7 2013. Shortly after started NTFS bug control regularly occur.

  VS install all drivers and can therefore be the cause of the bug check?

  Thank you

  Hello

  Thank you for the update on the issue.

  I appreciate your efforts to help us get the Event Viewer logs, but we will need files from mini dump for better analyze the question.

  I would ask allows you to check the Inbox of your email that we sent you a private message.

  Please return to the email with the required information. Also please let us know if you have not received a private message.

  Thank you

• Smartphones blackBerry is RIM read these messages? Where should I post the bug reports and suggestions for BB8900?

  I wonder where I should post the bug reports and suggestions for BB8900? I think that we have already found several bugs enjoyable device it is, but I've never seen any work email address to send these discoveries. I have also some proposals to improve the BB8900 features, making it even more attractive with minimal effort. We can actually open a new thread here and I can start posting bugs that I knew, but I'm not sure that everyone from RIM never reads these postings. All good ideas? Or maybe there is some forum tht could be used for this purpose?

  If you have any suggestions and information on RIM BlackBerry platform then post it here:

  http://supportforums.BlackBerry.com/Rim/Board?Board.ID=PM_Dev_Board

• Using the HTML Validator for Firefox, I found that all the pages I opened contains errors, not just the ones I designed; Why?

  Even use it on this page there are 5 geneated errors.
  I am using HTML Tidy.
  Is there something wrong? I use it wrong?

  We could add this to a bug with the web team of compatibility as well as in the support.mozilla.org of bugzilla component. http://validator.w3.org/Unicorn/check?ucn_uri=HTTPS%3A%2f%2Fsupport...

  Validation of HTML5 and Web in Firefox compatibility is something we can strive for and there was a site developed by a Mozillian these problems of compatibility. http://dev.webcompat.com/about Please read more about this project and add a description for the bug that you file for validation. You do not have something wrong, just to clarify.

  I'll also start a bug in the forum as there are improvements this quarter and the next. Thank you!

• Satellite Pro R850-143 won't matter to some CD in iTunes

  It really starts to bug me as @ 25% of the CD, I'm trying to import into itunes won't matter - I never had this problem with my old laptop.

  Hello

  Are you sure that this is unrelated to the iTunes software?
  Are you able to play music from this CD or other CD (disks)?

  Have you tried reinstalling iTunes?

• USBOTG and Charge at the same time on Stream 8

  To keep this thread as productive as possible and efficient for those who find it useful to:

  Unless you have under your eyes

  1. a schematic representation of the 8 Stream USB port (USB port and battery electric circuit etc.)

  2 source code for the firmware BIOS and kernel that controls the material

  Please DO NOT respond or say "is not possible".  In view of the above is true, you do not have enough information to say '' not possible. ''

  If no one replys with a solution, what he calls not possible by default.

  Also please do not answer to say ' I don't know how "or" but I know how to do anything else that ' is also not that useful.

  An update of the BIOS or other software update may be required by HP, Microsoft or both to offer this feature really intuitive and quite possible.

  And I hope that this thread can be an effort consolidated by all who have the 8 flow to make the necessary changes.  The majority of the other tablet PCs are capable of it.  It seems that only the 8 Stream and a few others have trouble with her.

  ~~~~

  I want the ability to use a simple, inexpensive cable and perhaps standard (with electronic active minimum inside) which allows me to host and to use one or more USB devices on the Stream via its USB port B microphone 8 while this cable can also be connected to a charger standard and charge 8 flow simultaneously.  This means that the cable has a minimum of three connectors.  One of the possible configurations are as follows (apart from the normal charging cable):

  1 cable Micro USB B Male - connect to the stream 8

  2 USB male A - connect to the AC charger (IE one that came with the 8 Stream)

  3. USB A female - one or several connectors to plug into the key of USB data, keyboard, mouse or even a hub.

  Connector # 2. above shall provide a power supply to recharge the 8 Stream via conn. #1 and the power supply for external USB devices via conn. #3 so that they are in use - all at the same time.

  A and if the same cable can act as a normal OTG no charger for when no external power supply is available.  This may necessitate a switch or an electrontics active inside.

  The last part of this goal is unimportant for various reasons.  I wish that HP, the manufacturer of 8 flow, to State in writing good mode necessary to do this, so that other manufacturers or even-it yourself can make maximum use of their tablet HP equipment.

  ~~~~

  The neat thing it will alow a person to do with their tablet, it is to work at home using the Tablet as a desktop PC by connecting a keyboard, mouse, perhaps external screen (with USB to the display adapter) and knit for a long time without time limit prescribed by the battery life because the charger provides energy to all involved.

  If there is only a single connector on the cable #3, then an additional node of coarse had to provide support for these multiple USB devices at the same time.  However, it would be better if there were several #3 connectors integrated in the cable itself.  This would be better as a suitable USB hub also requires its own power.  That an adapter is necessary if the whole thing were integrated into one.

  ~~~~

  I really want answers from anyone who has already accomplished USB OTG delivered with simultaneous load with flow 8. (independent of any published 'proper' way is also welcome)

  Today's date is 2015-01-16.  If in 2015-02-16 (one month), nobody has posted a solution and then starts to bug HP and Microsoft on it's us?

  ~~~~

  Technical training:

  I understand the possibility the tablet software and firmware must take a decision on the manner in which power flows on the power port USB microphone B pins.

  I know that with a proper design of the electronic circuit carring these signals of power inside the Tablet could be sensitive to what is connected and without risk to decide for himself what to do without needing to control software.  For example by testing/detecting periodically differential voltage or current management to see what sides of the connector can supply.

  But this is only one of the many "could bes".

  In addition, this can be no standard regarding the standard USB.  What seems to be actually the case with a lot of cables OTG + fresh, is that physical clues embedded in the cable or charger are used to signal to the Tablet what the situation is.  Then the signal of software/firmware of the Tablet, interprets what the situation is intelligently and responds by flipping the bits of correct hardware control to activate, or deactivate the power flow in the port and also control its direction in or out.

  I'm not familiar with the standard USB.  Maybe I could do more research, if I believed that HP followed with 8 Stream or even the standard covered this situation explicitly.

  But to a certain extent, it seems I'll have to invent something that should be intuitively just like it does with other tablets. Isn't it?  Maybe I'm overthinking, but I can't find any USB OTG + cables load that specify compatibility with 8 HP flow.

  In any case, I was familiar with both methods other use of tablets to send the highest mentioned signal to the hardware/firmware/software of the tablet to the idea that it's time to load / time of OTG or both.

  The first method is a 0 Ohm to 200 ohms short between pin USB A 2 and 3.  This is the bidirectional data differential lines D - and D + respectively.  In data mode, all the data passes back and forth on those lines.  When you load with a cable, it's the charger module that puts this short, not on the cable.  I measured the short on three different Chargers.  It is 0 Ohms on two of them, one of those who are the charger that came with the 8 HP flow.  The others 0 ohms was generic.  The third was for an apple iPad and it measured on 53KOhms.  It's probably not the resistance ohms 0-200, but probably it is impedance termination indicating that there is some intelligent serial port communication in the charger itself.  Leave it to Apple to be different.

  This method is somewhat questionable, as this signaling mode would prevent OTG + fee because it seems unlikely that you will be able to OTG when the data lines are shorted each and overloaded with such low impedance.  I could be wrong on this subject...

  The other method I have seen suggested to work with some tablets and phones other than the 8 stream is too short the USB microphone B pin 5 to Terminal 4 with 0 Ohms to 100 000 Ohms.

  USB B has 5 pins.  USB has only 4.  The extra pin on B moves the GND pin 4 pin 5 pin to and makes pin 4 PIN ID.

  If this signal applies to a drop in the ID pin (4) or in some cases, I saw that she proposed, he runs down with 0 Ohms.

  Dead shorting things always makes me nervous.  If ID is a simple normally high impedance high input, resistance could be used to make voltage well below the low or zero threshold while also preventing the risk of damage when cheat on him with a device that you do not have the diagram for.

  Yet, 100K is a bit high for a 'pull down' in most of the situations that I'm used to.  Even a 10K would be uncertain. A 1 K or 2 K seems reliable enough, but then things are weaker and in know more nowadays low...   All but a dead short but if possible.

  So, it seems possible that the device might be able to "indicate" by the specific value of the resistance, which can be found here.  In other words the resistance is not a pull down but in fact a signature analog ID, in which case the exact value will be crucial. So if this is the case, a guess is not going to work.

  Obviously in such a system as described above, a chip inside the Stream 8 should be responsible to support this information. I hope the 8 Stream has such a chip.

  Probably a register inside this chip would be at all times what the State of the pin ID is a binary number.  All that is needed is for the BIOS to the chip and the registry in it and read this number via the bus to determine what happens to the port. Finally, he would use that signals of info to send the order of material to the electrontics of power set the appropriate direction to take etc.  (and change the State of the icon on the screen of the rude)

  I don't know if the PIN ID method described is a standard USB or not either.

  Eventually, there may be a third way. But I do not suspect that it would be possible with a non-active external device. In any case too complicated for the novice DIY for sure.

  The device would need to act is a kind of extension of bus.  As an active hub.  But she would use the negotiation of data USB serial lines and in addition to reproduce one or more additional USB ports, intelligently inform the tablet to get with the program which is "now we're going to otg and recharge at the same time."

  This requires a smart external device with a processor Inside, no doubt.

  It seems to me that many other tablets have been able achieve avecjoint here the need for a smart external device and thus the flow must also be able to do.

  There is a device that claims to be able to work with the HP Jet 7 and 8 and provides same ethernet and USB and big DVI ports so loads the data stream.  But its expensive because it is active.  Se here:

  http://AMZN.com/B00OVDE0GC

  It's called a "Docking Station".

  A reference to a product that does exactly what I want (possibly without active electronic components) is here:

  http://AMZN.com/B00LTHBCNM

  It's by Kirin and it is a device of type squid with four USB ports.  Precisely, which is my goal.  But read in the comments stream 7 user indicated that he would not be OTG and load, not really clear if it worked as a hub USB OTG or not.  Another evaluator stated that she would not support even a single USB device much less fees of 8 Stream.  This device has a switch.

  I forgot to mention that some 'hackers' have claimed success with other tablets to deceive their devices by using a multi-step process to plug things in.  Usually in general they would get connected Tablet and load first, then they would return a switch or something remove some resistance or the signal was introduced by the first position of the switch. For some reason any Tablet would continue to require. Then the data lines would be free and they would plug in a usb key and it mounts correctly even if the tablet was always in charge.

  It's like the power circuit has a lock which does not allow it to return to the mode "power flow" as long as he still feels the power flows inward regardless of what software it is telling.  Full proposal here.

  These tips seem dubious to me.  Changes in the BIOS could change the way it works.  Also you can not be sure what actually happens if you do not have a schematic representation.  You could damage your tablet.  Many people will support icon in the operating system whether the Tablet is in charge.  But I'm sort of a low-risk guy and my policy is generally indicators of intereperet not to have meaning at all once a device is functioning in a non-standard setting.  Especially when it's something that I did not built and could not fix if I FRY.

  Hypothetical reasoning: tell me what data sensory discs really the State of the charging light screen?  This reflect the bit of hardware control programs actually feeding management and status on the port?  Or does it measure the direction of the flow of power, said in the section of the circuit battery monitoring?  Point - none of us have a schema because it's owner. To really be sure according to the smart electronic hardware, the port must be mode flow under advisement "of power. If it's in a "power flow out" mode and power will be delivered externally as well you wind upward with both power supplies the same power at the wheel nets.  In this case, the two opposing regulators attempting both to drive 5 V can have slightly different voltage calibrations.  That could lead to fighting between them, with more than 100% of their capacity.  For example if you try to regulate 4.95 real V and the other and other attempts to regulate 5.05 V.  Current then flows to the tune of 100 mV / a few milliohms in the cables linking the two.  This may be several amperes. (many)  In other words, like I said: you want the tablet to know that power is coming in don't go out and automatically hitting the internal switches needed for that to happen. Probably the icon should indicate this with precision, but in some wacky situation, he could not. There may be a chance that the icon could indicate the load and still be burning or focusing on some circuits of the tablet or the charger.

  Another thing, I could see that happening is if you play with these reported resistance types enough you might find a resistance value that winds up place the device in an intermittent condition.  In other words it keeps flipping back and forth quickly between OTG and fresh.  It can give the illusion that it works.  You can have marginal communication with your USB devices and battery could even load.  But will still be a lot of stress on the power circuit.

  It is difficult for me to risk a Tablet perfectly well if I don't know exactly what I'm doing.

  If a brave individual makes their own experimentation and verifies that it charges and OTGs and you tell the rest of us, you're a hero.

  Maybe one of you has a good knowledge on the USB standard to have more confidence in such an experience... like what the ID pin 4 REALLY supposed to work for example?

  That's what I know so far.  If you think you can help, thanks in advance, or if this helped you, then your quite welcome.

  It works

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us & l = to & CS = 19 & SKU = 470-abes & baynote_bnrank = 0 & baynote_irrank = 0 & ~ CK = baynoteSearch & dgc = CJ & cid = 47997 & lid = 4279734 & acd = 10550055-4485850-eb75dcb47e53437680ed323a1f4885fe

  Evidence

  http://targusblog.com/2014/11/25/how-to-turn-a-99-Tablet-into-a-workstation/

  But it's 4 x the price in Europe

  Have fun

• Which could change existing, correct bookmarks to junk bookmarks to certain websites only?

  It is not all bookmarks are problems; I'll save a bookmark, check it out, look at later and she is always correct, look again later and he was replaced by some link of the ad or something. Example: http://googleads.g.doubleclick.net/pagead/ads?client=ca-pub-0077202605626466 & output = html h = 600 & slotname = 4153090285 & w = 160 & lmt = 1306034690 & flash = 10.0.12 & url = http %3% 2F % www.rumormillnews.com%2Fcgi-bin%2Fforum.cgi%3Fread%3D205062 2F & dt = 1306034691292, & GPP = 3 & VHS = r20110512 & jsv = r20110506 & prev_slotnames = 3401334257 percent 2C9653369832 & correlator = 1306034691054 & frm = 0 & adk = 3256405821 & ga_vid = 632295826.1271634483 & ga_sid = 1306034691 & ga_hid = 529914415 & ga_fc = 1 & u_tz = -. 240 & u_his = 1 & u_java = 0 & u_h = 1024 & u_w = 1280 & u_ah = 994 & u_aw = 1280 & u_cd = 24 & u_nplug = 21 & u_nmime = 79 & biw = 1261 & bih = 826 & ref = http % 3A % 2F % www.rumormillnews.com%2F 2F & fu = 0 & ifi = 3 & dtd = 154 & xpc = www.rumormillnews.com lHw4GJaXKF & p=http%3A//

  This happens only with specific sites; I use the same version of Firefox on another computer and can record the same bookmarks without any problem. I hate to be paranoid, but only affected sites are those that present information on evil people in power. I have to save the bookmarks to a text file and re - paste when I want to visit them. It really starts to bug me. I don't think it's Firefox, but some kind of virus. I have a complete antivirus protection and regularly do deep analysis no impact (on this issue).

  If anyone has any ideas, I like to hear them. Thank you!

  This may be due to a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• How can I delete a partition on a Mac Mini (end of 2012)

  Hello

  I would like to know how I could erase a partition I did by mistake. My Mac is very low in memory and, of course, I as soon as I open some applications Mac starts to bug... I just did an installation fee and it's still going slowly...

  When I try to do it with disk utility, it is impossible. I have a screen shot so that you could understand my problem more...

  

  OS X is installed on Macintosh HD, it is the general principle.

  I use a Mac Mini Server (end 2012) - processor: 2.3 GHz Intel Core i7 - memory 4 GB with OS X El Capitan

  In advance, thank's a lot

  MIKE

  How do yo start to access disk utility?

  You can not erase/format the partition that you started from.

  I can't tell if you're trying to do.

  Try to start Recovery

• Satellite L650 - 1 MM-video display problem

  Greetings from Finland.

  So, about a month I bought this laptop of mine, Satellite L650 - 1 MM, and I was wondering what the heck is the problem with the video display. Don't know about you is this a problem with the hardware or just something with the settings on the computer. I mean, even on youtube, that so I got pixelated image when I look at some 720 p HD videofootage, it hurts. Here's some evidence: [http://img822.imageshack.us/img822/6623/youtubena.jpg] and Yes, I got the last Flash Player plug-ins and everything, so it couldn't be her.

  And perhaps, eventually, when I look at some * movies, series tv or something, they looke all so pixelated. And I know that there are codecs and everything, but I'm positive, I got all this managed. In fact, at the beginning I had the worst of the video display, but with the codecs I got a little better. Yet, I am far from satisfied. Now, I heard that there could be some problems with Windows 7 and display video, but you know, is not certain.

  So basically I'm here to exclude the possibility that there could be some problems with the equipment. Could there be? The screen looks fine, when normally at idle and for example surf the net, but the streaming videos or watch videos, oh man, oh man, it's so pixelated. I have the latest Toshiba display drivers, BIOS drivers too. It would be any help, if I have the latest drivers directly from the AMD website (Ati Mobility Radeon HD 5650)? Does still? I mean when Toshiba updates their own display drivers and everything, and very rarely what I heard.

  Here are my features of laptops:
  Satellite L650 - 1 MM
  Microsoft Windows 7 Home Premium 64-Bit
  BIOS-version 1.80
  Intel Core i5 CPU M460 @ 2.53 GHz
  4096 MB RAM
  HARD DRIVE ~ 600 GB
  ATI Mobility Radeon HD 5650 version = 8.723.2.0
  15 "6, 1366 x 768
  True color (32 bit)
  Conexant Audio Driver for AMD HDMI Codec version = 4.98.26.0

  So please, if there is any suspicion you can give me, I would much appreciate it!

  Ed.
  Also, just remembered, that I had one more problem. When connecting HDMI to my HDTV 40 ", and when I close the screen of my laptop, the sound starts to bug and in some cases video too. So I have to keep my laptop open screen, so I can watch movies without any problem sound or video. What is with that?

  Post edited by: lapa

  Hi mate

  To be honest, I don't think that it is a problem of display driver.
  You have this problem of pixel, I look at the videos of internet only or also if watch you DVD movies?

  Did you watch the video in continuous mode full screen?

  The videos are usually pixeled because of videos were recorded in low resolution or have been compressed to reduce the resolution to reduce the size of the file.

• Problems graph/WinUpdate problem/updating BIOS-> XC-605-EB31

  Hello world!

  I've been trying to contact support any longer, but for some reason, my SNID and S/N are never recognized...

  Anyway,.

  I have an AXC-605-EB31, which was Windows 8, processor Intel Core i5 4440, 1 TB of disk at the base, hard, Intel HD graphics, DDR3 memory.

  As I started for the first time, there was an update immediately for Windows 8.1. After a Win8.1 update a few monts after I received my computer, one of my games have started to bug out, and I heard him could have been caused by the game itself being too old for the card intel that was too powerful for her. In the end, I left the game and never returned to it. I think I did something at the time, but I can't rememeber. I could have tried to downgrade it to a certain point.

  Over time, the Windows 10 updated by, so I signed up and got the update the day 1.

  I should mention that I've had several accidents of graphics card, happening from time to time. But I expect an update Win10 to solve the problem.

  Later, Minecraft, a reason some have had problem loading textures and I still do not know why. At time, came on the Acer website to try to get support but could not do it all (and I didn't not Community existed...), so I went to Intel to try to solve the problem... to nothing does not. In the end, I decided to get a new card graphics (a Radeon HD 6450) to replace the current one buggy. He solved the problem... but no accidents.

  and here are the problems I have lately:

  Graphics cards crashes at least once a day,

  Graphics cards shows me a strobe of light whenever I try to update to the latest version.

  Microsoft Update gives me a 'White' error message when you try to update the most recent updated (I'm stuck on Version 10240)

  When we talk in the Microsoft community, we arrived at the conclusion that I need to update all the drivers (I did each of them manually, using the Exe file in each pack, even the Intel graphics card, but I'm not sure it worked properly...) and update my BIOS.

  My current BIOS Version is "P11 - A0" and the most recent is "P11 - B4". I was told to be extremely Moses with the update so I read the 'Readme' inside the packaging... but still don't know what to do.

  So I would like some support as to how I can update my BIOS, the issues I currently have:

  -What does it mean by "Booting Windows system"?

  -Where the 'BIOS package'? The provided screenshot says 'C:\D11\Normal\Win', but it makes no sense as I am launched on "C:\Windows\System32." And I'm stuck here like he told me to go and place the BIOSon... a flash drive which is 'E; \ »

  -Do you think I'm on the right track with what might cause the problem?

  Thanks for taking some time with me.

  Copy BIOS Win and Rom files in c:\

  Press the logo key windows + x

  Select prompt (admin)

  Once on the command line

  type

  cd\

  Press enter

  type

  CD victory

  Press enter

  type

  Flash.bat

  Press enter

  It will start flashing the BIOS

• WRT54GC and Speedtouch 510 modem

  Hi all

  I bought the wtr54gc a bit backward and tried to connect it to this darn speedtouch 510 modem, but nothing helped.

  I can connect to wirlessly for the wrt with no problems and have implemented under PPPOE with the correct credentials. The wrt is configured in Bridge mode.

  Now, when I connect the Speedtouch modem to the WAN port on the WRT, the router is not "dial" the internet connection at all, so no Internet; o)

  I know that the modem is fine as I can connect the PC directly to him and get an Internet connection.

  Now, I've been juggling for a long time and I think there may be a problem to do with the router and the modem running DHCP and the two do not talk to each other. The modem works on 10.0.0.138. The Rotuer uses the standard 192.168.1.1 address.

  My question is how to fix this? On which box DHCP must be turned on/off?

  Ive read somehwere on the execution of the modem in Bridge mode. This will help?

  I can be barking the wrong tree altogether so any help would be appreciated and need detailed help coz that it really starts to bug me! ouchhhhhhhh! (O).

  Respect to all.

  Your problem is that the SpeedTouch 510 is not a modem is a modem-router and already have your PPPoE connection for you.  You shouldn't try to do two times your PPPoE connection.

  There are two solutions:

  (a) automatic WRT54GC Connection Type Internet 'DHCP' value or

  (b) set the bridge mode SpeedTouch, so converting it to a real modem.  Then do your PPPoE with the WRT54GC connection.

  Note that with the option a, let two active DHCP servers and the ethernet port on the SpeedTouch to thread on the Internet on the WRT54GC port.

  With option (b), the SpeedTouch DHCP server is automatically disabled.

• Can't boot from DVD or USB! Windows 8

  It then it really starts to bug me! I tried to solve this problem for a few hours now, and this is absolutely not the case! So I want to do a clean install of Windows 8. I did all the steps to get it on a dvd and a bootable USB.  That was the easy part.  At first I tried to boot into DVD, I went to the Bios and the value of the first boot priority CD/DVD. After that and several reboots I get nothing! I went into F12 and it said to start from the hard drive. Good if it does not work. I go to copy the Windows 8 ISO on a USB key. Good in fact, it was easy, I can go into the Bios again and don't see an option for USB FLASH directly, but see other options start USB, such as USB, FLOPPY USB, DVD, AND USB HARD DRIVE. I first select USB DVD, after several reboot nothing! Went to F12 (boot options) and still nothing! Then, I chose USB HARD DRIVE, exactly the same thing! So now I am on my knees and gave up! I ask for help in my community and I hope that you guys can understand this.

  I just bought the computer 3 weeks ago its a new Aurora R4. I don't know whether it is a hardware problem, it seems. I tried to boot from the CD/DVD with the re - install OS AlienWare gave me and it read perfectly. So if it fills up it should work right? Then I tried several blank DVDs and even went out and bought some new! Still nothing! Ahhh, sorry it's really bugging me. Something so simple, but I'm so lost.

  Thanks for any help from friends!

  Dave, :)

  Press f2 to enter setup, disable the option "password at startup" and to record changes... now boot... you're done. Thank you

• Share network locations do not appear in the music app

  Current workflow:

  In Zune, added \\share\mymusic to identify places in the music, all music albums folder and metadata and display perfectly.

  Now, in WIndows 8 music app it will display ALL my music after you follow the instructions to make a symbolic link, so I could cheat this stupid WIndows library function to add the folder without complain about indexing.

  I tried the same thing for pictures with no result.

  Does anyone answer and tell me to copy my 30 GB + music on the local disk.  It's ridiculous and you know it.

  If the music app is fundamentally flawed in this way just say so we can start logging bugs and feature requests.

  Otherwise, anyone who has this simple workflow in Windows 8 music app please tell me how you got to work.  I want all the music of \\share\mymusic is not displayed correctly as it does currently in Zune.

  This seems to be a limitation in versions shipping Win8 apps, music, Photos, etc. - are not unable to network shares using (raw, non - WHS) that are added to libraries. That said, apparently Microsoft is working on the update of these applications to include this feature.

  They did not understand as part of the release is a mystery.

  That their tech support doesn't, it's frustrating and disappointing.

  So, in short - we have to be patient for a fix...

• How can I disable the facial recognition for GOOD?

  I just opened a catalog with images of only a hundred and the stuff of recognition of face just popped up and I said NO

  He then ran for a few minutes, attach to the top of my machine

  I need to open my main catalog that has 180 000 images and I can't sit and wait while it grinds away for a day or two, do something I don't care about anyway!

  How can I make go way and STAY AWAY?

  I'm really tired of Lightroom, get updates that interfere with my usual workflow.

  I am a professional who has a heck of a lot of things to do and to have to continually go search the Web for how to get rid of the unwanted 'features' AUTO really starts to bug me.

  Hi Chuckwa,

  You can always pause, please check the screenshot and then press the 'G' return to the display of the grid.

  

  I hope this helps.

  Concerning

  Rohit