Start win 7 error

Similar Questions

• I get a "not an application valid win 32 error" when I try to download and run a program

  Original title: win 32 error

  When I dounload one program and try to run it I get one is not a valid win32 application error. This happens on more than 1 program how to fix this?

  Hello

  ·         What program are you trying to install?

  ·         The program is compatible with Windows XP?

  ·         Since when are you facing this problem?

  ·         What web browser do you use to download a file?

  I suggest to delete temporary internet files from your computer, and then try to download the program, save it in a different location and try to install it from there.

   

  Get the error: not a valid 32-bit application can have several origins:

  I have listed some of them below.

  The file is corrupted, bad or missing.
  (a) if the hard drive is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  (b) If you are running the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:

  
  (a) If you try to run a program that is not designed for your version of Windows, you can get this error.

  (b) Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.

  (c) if the program is an MS-DOS program more former start program or Windows, you can get this error.

  (d) if the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.

  
  (a) this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

  (b) if the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.

  one) If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or drivers that are not compatible with Windows.

  (b) download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Follow these steps and check if that helps:

  Step 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• Win Vista error when the computer is open

  I've been surfing this site looking for an answer of the following error messages when I open the computer Application: open them all at the same time.

  1 could not start the dispatch table, win vista error

  2-cannot create TransportManagerServ: create

  3 - the third is a dialog box with the title: error SDMan WinMain. It says: an instance already exists! -OK

  Can someone give me a hand? Thank you

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Also, try the following:

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Andre Da Costa http://adacosta.spaces.live.com | http://www.ActiveWin.com | Microsoft MVP

• Try to install the update for win 7 error code windows service install could not be accessed

  I can't indtall a program

  Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  7 How do I backup the registry in Windows

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.

• start up rundll error upone.

  From the start I get error RUNDLL loading C: / documents module not found. How can I get this repair? THX Don

  Hello DonHoHo,

  Have you tried to uninstall and reinstall MSE?

  If mistakes have started up when it was installed, it would be possible to resolve by deleting the image.

• Help me! Downgrading from Vista to Win XP ERROR NEED to ADMIN PASSWORD

  Good, so I'm downgrading and when I installed my XP CD and XP starts it says ERROR. Then I went to recovery and he asked me the Admin password. When I put it in it says it is incorrect when it is my password. What the? Please help me! I deleted everything (even system recovery so I can't roll back to vista, and my recovery CD does not work) so my computer is completely useless! I just need to put in the password! SOMEONE PLEASE HELP ME QUICKLY PLEASE! D =

  1 have you tried formatting completely model? 2. are you using a Windows XP OEM or retail 3. Recuperer recover CDs, contact the HP support... they will deliver it for you.

• error: "error cannot start fron CD-error 5."

  Original title: cannot restart from a cd

  Hello

  I'm trying to restart xp so that I can use a Norton recovery CD. However rebooting and pressing the prioritization boot from the windows cd comes up with "error cannot start fron CD-error 5."

  Any ideas?

  Thank you

  The disk you are trying to boot from was not burned correctly. You will not be able to boot from it.

• When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

  When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

  Why would it gives this error at startup?

  It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.

  John

• Cannot start properly 0xc0000006 error code

  I tried to download the free AutoCAD Architecture Autodesk Student version.  I am able to download and install, but when it arrives at the end of the installation and the commissioning early, I get a window that appears and says that it is impossible to start properly 0xc0000006 error code (I probably spent by this process ten or more times).  I tried several things.  I tried to turn off my firewall and download, still get the same message.  Please help me.  I just bought this laptop this summer, and it's a Dell Inspiron with Windows 7.  I have a lot of space to this topic.

  Thank you

  k

  Hello

  1. what version of AutoCAD software do you use?
  2. is it compatible with windows 7?
  3. are you trying to install the AutoCAD from the downloaded file, or you try to run the software directly without saving it?

  Step 1: If you try to run the software directly without saving it and then place the file and then try to install it.

  Step 2: You can try to install with administrator privileges and check.

  Here's how:
  a. right click on the installation file, and select run as administrator.

  Step 3: Alternatively, you can try to install in clean boot state and check.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot start Windows install error "3 that the system cannot find the path specified".

  Original title: problem with Windows install

  the installer of Windows won't work, made sure that it's automatic in services, but when I click start it says error 3, the system cannot find the path specified

  Hello

  1. Did you changes to the computer before the problem occurred?

  Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:

  Unregister and register the Windows Setup program again

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2:
  Also I suggest you to update your installation Package of Windows with the latest version of Windows Installer available in the link below.

  Windows Installer 4.5 Redistributable:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hope this information is useful.

• Whenever I start my computer, I get a statement that Windows Defender cannot be started due to error code - 0x8001066ba

  Whenever I start my computer, I get a statement that Windows Defender cannot be started due to error code and I can not start it manually by the same error code. How can I solve this problem?

  Hello

  What is display / causing the error message? Some security/antivirus/antispyware products can cause this
  error. On those which do you use, including everything that you have ever even those uninstalled (remainders
  may cause problems). AVG and others have been known to disable Windows Defender.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• WLan AutoConfig was able to start with the error 193:0xc1

  Former title: error 193:0xc1

  My wireless does not connect because it says that the WLan service failed to start.

  I went to the computer > manage > services > WLan AutoConfig. It has been set to automatic but it was empty when he should have said start. When I tried to start it I got the message service was able to start and the error in the title.

  I opened the dependencies in order to check if that was the problem and each of them have begun. So, it seems that the error is always in WLan AutoConfig.

  I tried the system restore (this problem just started today) to an earlier point, last week. It sticks on the system restore is initializing an hour +. I tried several restore points, but it always gets stuck on initialization.

  I looked at similar questions and I did everything recommended in people, but it seems that the answers stop without the original poster saying that they got it to work or not.

  Hello
   
  
  Step 1.
  Follow the steps below and check if the problem is resolved:
  a. Click Start, and then click computer.
  b. go on the system disk, where the operating system is installed (usually drive C :).
  c. find the program file.
  d. remove this file and restart the computer and check if you are able to start the service.
  Note: If you don't see the program file check if the file is hidden. Clickhere to find out how to show hidden files.
   
   
  Step 2.
  If the steps above to solve the problem I highly recommend to run a Virus Scan online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
   
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Live Photo Gallery. error: Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. 0x8007007e error code

  Windows Live Photo Gallery. error: Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. 0x8007007e error code

  Hello

   
  There seems to be a problem with the Windows Live Photo Gallery, it's better to post the same question to the Windows Live Photo Gallery site for assistance. We have a dedicated team to help you with such questions.
  Windows Live Gallery Portal: http://windowslivehelp.com/product.aspx?ProductID=20
   
  Hope the information is useful.

• 'illegal start of expression' error then you are trying to compile an Extension WebWorks

  Hello

  I'm trying to compile a simple Extension of work Web to show a Dialog.alert (), just a simple code to start with Extensions WebWorks. The problem is that when I try to compile my code with javac I get many 'illegal start of expression' errors on the scene who has any errors. Here is the log from the console:

  Nathan-Camposs-MacBook-Pro:webworks Nathan$ javac -source 1.3 -target 1.3 -deprecation -classpath /Developer/Applications/Eclipse/plugins/net.rim.ejde.componentpack6.0.0_6.0.0.43/components/lib/net_rim_api.jar -sourcepath /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/*
  
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:15: illegal start of expression
      public static final String FIELD_ALERT = "alert";
      ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:15: illegal start of expression
      public static final String FIELD_ALERT = "alert";
             ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:15: ';' expected
      public static final String FIELD_ALERT = "alert";
                   ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:16: illegal start of expression
      private Alert _callAlert;
      ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:18: illegal start of expression
      public AlertScriptable() {
      ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:18: ';' expected
      public AlertScriptable() {
                              ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: illegal start of expression
      public Object getField(String name) throws Exception {
      ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: ';' expected
      public Object getField(String name) throws Exception {
                            ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: ';' expected
      public Object getField(String name) throws Exception {
                                        ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: not a statement
      public Object getField(String name) throws Exception {
                                                 ^
  /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: ';' expected
      public Object getField(String name) throws Exception {
                                                          ^
  11 errors
  

  Any ideas?

  Best regards

  Nathan Campos

  I solved this. I was saying that all inside a constructor.

  I'm sorry.

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again