Startup MacBook Pro-comment problems prevent health going to disk/check once again

Similar Questions

• can I change my old trackpad and replace Force touch trackpad on my macbook pro... it's going to work?

  can I change my old trackpad and replace Force touch trackpad on my macbook pro... it's going to work?

  N ° any other hardware and firmware.

• The use of a third party bought the CD/DVD software (i.e. TurboTax bought on eBay) can cause damage to my MacBook Pro?  If so, is there anyway to check for this?

  The use of third party software bought DVD (i.e. TurboTax bought on eBay) can cause damage to my MacBook Pro?  If so, is there anyway to check for this?

  As it is a pressed original, CD/DVD printing, and not a house in CD - R or DVD-R commercial, there should be essentially no possibility of its containing malware.

• When going to the site once again?

  Hi all
  
  When I went to http://apex.oracle.com, I found it gives me
  http://www.Oracle.com/splash/collabsuite/maintenance/index.html
  
  When going to the site once again?
  
  I hope to be as soon as POSSIBLE
  
  Best regards

  It's the weekend of the new year!
  They chose to do the interview!

  He will be back and available when they are done.
  ... and this web page redirected gave you many alternatives if you really have a problem.

  ---
  Furthermore, I don't bother to check until I had a moment of inactivity, about 14 hours after your post. The original URL works fine which suggests that the maintenance is finished...

• MacBook Pro display problem

  Hello members of the community.

  As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

  The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

  I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

  It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

  I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

  In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

  I have the entry level MacBook Pro with the retina, last generation.

  Any constructive contribution welcome!

  See you soon.

  -adreaux

  Hello bernardn753,

  After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

  How to reset the NVRAM on your Mac.

  Thank you for using communities of Apple Support. Good day.

• MacBook pro retina display (mid-2012) goes black

  All by using the computer to randomly screen goes completely black.  After a few attempts at tapping trackpad or a bite or two, screen turns on but then log on to the computer. Program I was running is still there and continues on. It is very random and I fear that a logic board or the video card component may be out.  MacBook Pro retina display mid-2012, 16 GB 1600 mHz DDR3 RAM, graphics NVIDIA GeForce GT 1024Mo of 650M;  2.6 i7 running OS 10.11.2

  Hi James,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your MacBook Pro. I'm a bit ambiguous on the screen exactly who you see when you log in, but according to your description it looks that your computer may be involuntarily go to sleep. If this is the case, you can find the troubleshooting steps in the following article useful:

  If your Mac does not sleep or wake up when expected - Apple supports

  As mentioned in this article, another possibility on laptops like the MacBook Pro is that the screen closed sensor may be triggered unintentionally. There is a small magnetic sensor in portable computers and sometimes, being close to things like briefcases magnetic closure or magnetic jewelry can cause him to think that the display was closed, which then puts the machine in a locked sleep state. If possible, you can test the issue on an office open without any potential source of interference.

  Magnets in devices could cause sleep your Mac computer - Apple Support

  See you soon

• Network with the MacBook Pro 15 "problems

  My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.

  2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated

  Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few

  the company's programs, but I mainly work on the Mac side.

  An intermittent connection problem became constant after a week of using the computer.  My router DLink DSL (model 2750B) is two feet away from the computer.  In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem.  IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own.  Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."

  I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine.  I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)

  Any suggestions on how to solve problems, or I would return the computer.  It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi.  I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.

  Thanks for all the wisdom and strategies.  Maggie2012

  Hello maggie2012,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:

  Safe mode

  How to test a question in another user on your Mac account

  Best regards

• MacBook pro space problem

  Hello guys,.

  I have a macbook pro. and it's 120 GB of memory. but the last 2 months I have a problem on the tried device.i and remove a large number of my data to it still mac pro.but says I have enough space.i check specifications. there I found that more then 35 GB is covered with another file.

  can someone help me to make room on the device.

  I mean how can I delete or free up space by deleting other files.

  I give u a screenshot to make u more understandable with the problem.

  guys thank you very much in advance.

  Raza

  

  Hello

  Just to let you know, OS X only requires about 9 GB of free storage space. That does not take into account photos, music, documents, notes, etc.

  Help here > http://pondini.org/OSX/DiskSpace.html

  Restart your Mac after the deletion of data to see a difference in storage space.

• Very slow startup MacBook Pro

  Early 2011 MacBook Pro 8.2-2.3 GHz, Intel Core i7 X10.9.5 of OS running

  Starting last very long. Spinning last icon for about 10 minutes then the Apple icon is anther 10 minutes or more. Everything from here looks very good, but it makes me nervous. Had he listens to the store in 2014 to right before he went out of warranty. Utility ran and fixed all the permissions. Approximately 10% of capacity on the hard drive so maybe I need to delete some things or no load on the Passport.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

  Safe boot mode.  https://support.Apple.com/kb/PH21875?locale=en_US

  Select Macintosh HD as the startup disk.

  'The value default startup disk' http://support.apple.com/kb/HT1310

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Sort the macbook pro screen problems?

  MacBook Pro 15 inch end 2011, 2.2 GHz Intel Core i7, 4 GB 1333 MHz DDR3, AMD Radeon HD 6750 M 512 MB.

  El Capitan 10.11.3 OSX

  So a week ago, I got my board logik replaced under the scheme where Apple do for free and when I got back that I updated the OS to El Capitan, and since then, my macbook was restart itself after the screen messes up, as there lines horizontally will go across the screen, the screen turns blue with vertical lines or he'll usually scrambled and the right part of the screen is on the left and the left side is on the right. This happens usually when I watch shows online, I bought a new external hard drive yesterday to replace my old and I did a full backup time machine, which took about 6 hours, I left alone and did not touch my MacBook all the time so he was backing only, and so it didn't plant once then when I look at something online it could crash a couple of times in an hour. It happens on safari and chrome.
  Guidance on how I can resolve this issue? I plan to do a clean install of El Capitan, I know that it is usually a last resort, I already have the stick bootable installation, I was wondering if anyone had any idea what to do?
  Thank you very much

  Bring the MBP and checked it.  It is indicative of hardware problems, not software.

  Ciao.

• HP 3052 scanning problem a problem prevented the document under analysis, please try again or for troubleshooting

  a problem prevented the document analysis, please try again or for troubleshooting for hp laser jet 3052 pritner

  Hello

  1. is the issue limited to a specific type of document that you are trying to scan?

  2 did you a recent software or hardware changes to the system?

  This problem can occur because of changes on the system which could affect Windows Fax and Scan.

  Let's try the following steps to resolve the error:

  Make sure that you use only one application for analysis at a given time.

  Update your printer firmware/driver to the latest version:

  HP LaserJet 3052 all-in-One printer range

  For more information, see the articles:

  Scan a document or photo with Windows Fax and Scan

  Solve printer problems

  You can also check out the link to HP support and check if it helps:

  The problems of scanning

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• CS4 to new MacBook Pro, running the Mavericks OSX but no disk drive

  I have CS4 installed on a MacBook Pro running OSX Lion; I now have a new MacBook Pro running OSX Mavericks and install - I have the original CD but no disk drive on the new Mac - what do I do?

  Help, please

  You can download from - CS4 products download and you can install it on your Mac.

• How to transfer Macbook Pro running Mavericks Photoshop Elements 9 (download) from old Mac again?

  I will replace my Macbook Pro with a new Macbook running the Mavericks and want to transfer my (downloaded) Photoshop Elements 9 to the new computer. How do we?

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 9:

  http://prodesigntools.com/Photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

• 2012 Macbook pro display problem

  Hi everyone, so I bought a used Macbook 2012 pro and this is my second day with her. I picked it up upward with one hand the other day (I know you shouldn't) I tried to grab the book I had sitting under. Anyway, when I did, I got vertical lines running through the screen! I ask it immediately and simply applied a bit of pressure again left (I held from same side) and it happens again. The right did not have that. In addition, the computer went ahead and rebooted on its own a few seconds later. I'm new to Mac and I was wondering if it's just because I put pressure or if the previous owners damaged in anyway. I have 14 days to return if I have a problem.

  Thank you in advance!

  If your MBP is a retina 15 ", this may apply:

  https://www.Apple.com/support/MacBookPro-videoissues/

  In any case, it would be a good idea to have rated him an Apple store genius bar.  It will be FREE.

  Running an Apple Hardware Test is also recommended:

  https://support.Apple.com/en-us/HT201257

  Ciao.

• After El Capitan on new Macbook Pro Mail problems

  Mail doesn't work properly anymore now that I use a new mid-2015 MB Pro with El Capitan.  Non-Pourriel, including remittances from my own account to myself, is marked junk and put in the Junk folder. Mail that is not marked as spam is also put in the Junk folder. I can't find the rhyme or reason for the choice of the filter. I always install the latest updates on all of my devices. Can someone tell me how to solve this problem? Thanks in advance.

  There are two ways to designate as junk mail. One is based on the local 'training' that you used in the Mail application. These emails are marked in Brown, the other method is by e-mail based service provider on whatever rules or databases they use. These emails end up in the Junk folder, but are not marked in Brown.

  The only way to deal with the second type is to open a session in the portal provider email, change your preferences or update the address book provider.