Static class functions: PLS-00801: internal error [phd_get_defn:D_S_ED:LHS]

Similar Questions

• PLS-00801: internal error [phdcsql_canonical_sql]

  Hi again
  
  Using a query like this:
  

  INSERT INTO OM_DB.CDRS_VALIDOS_TMP (
    SELECT 
    FROM (
      SELECT 
      FROM (
        SELECT 
        FROM (
          .....
        )
      )
      FULL OUTER JOIN
      (
        SELECT ....
      )
    )
  )

  I get this error:
  
  ORA-06550: line 0, column 0:
  PLS-00801: internal error [phdcsql_canonicalize_sql: state], lot 1 row 1, Col 1
  
  Now, believe me, all the select its ok, because I just probe the part and his work, but when I try to insert in the OM_DB. Table CDRS_VALIDOS_TMP that it does not work, I hear something about a bug on this version, it's my only clue, an idea?
  
  These are the settings of the oracle:
  
  "Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi.
  "PL/SQL version 10.2.0.3.0 - Production.
  "CORE 10.2.0.3.0 Production."
  "TNS for Solaris: release 10.2.0.3.0 - Production.
  "NLSRTL Version 10.2.0.3.0 - Production"
  
  Thanks in advance.

  Similar to [stored procedure does not Compile in 10g release 2 leads to PLS-00801 | https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=377031.1].

  SY.

• PLS-00801: internal error [74306] help me!

  Hello
  I wrote a few Application of PL/SQL using Bulk binding and PL/SQL Collection at Oracle 9.2.0.8 AIX
  
  But I met the strange error message when compiling.
  PLS-00801: internal error [74306 | http://forums.oracle.com/forums/]
  
  I tried searching Google and Metalink, I couldn't find the answer on the error. ?:|
  
  # code example lifting PLS-00801
  -----
  declare
  TYPE the word () IS RENDERED
  T1D PLS_INTEGER,
  PLS_INTEGER T2D
  );
  Term_arr TYPE IS an ARRAY OF THE term directory INDEX;
  TYPE term_group IS the TABLE OF term_arr INDEX DIRECTORY.
  term_group v_term_group;
  BEGIN
  SELECT
  20080101 as dt,
  as T2D 20081231
  LOOSE v_term_group COLLECTION (1)
  FROM DUAL;
  END;
  -----
  as I think, this code has no problem, but at the time of compilation, it shows error ORA-00801.
  can anyone tell me about this error or problem in this code?

  Probably a bug in 9i, it works in 10g:

  SQL> select * from v$version
    2  /
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE    10.2.0.1.0      Production
  TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  SQL> declare
    2  TYPE term IS RECORD (
    3  dt1 PLS_INTEGER,
    4  dt2 PLS_INTEGER
    5  );
    6  TYPE term_arr IS TABLE OF term INDEX BY BINARY_INTEGER;
    7  TYPE term_group IS TABLE OF term_arr INDEX BY BINARY_INTEGER;
    8  v_term_group term_group;
    9  BEGIN
   10  SELECT
   11  20080101 as dt,
   12  20081231 as dt2
   13  BULK COLLECT INTO v_term_group(1)
   14  FROM DUAL;
   15  END;
   16  /
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  SY.

• database from 32 bit to 64 bit on Linux data / ORA-06553: PLS-801: internal error [56319]

  Hello

  I've migrated EBS from 32 bit to 64 bit Linux database. I followed this Metalink note.

  Note - 341880.1 how to convert a database from 32-bit to 64-bit on Linux database?

  After the move, I did the below steps and get the error below... How to solve this problem?

  ===================================================================================

  SQL > startup nomount

  ORACLE instance started.

  Total System Global Area 595591168 bytes

  Bytes of size 2098016 fixed

  415239328 variable size bytes

  163577856 of database buffers bytes

  Redo buffers 14675968 bytes

  SQL > @create_control - file.sql

  Created control file.

  SQL > alter database open resetlogs;

  Database altered.

  SQL > ALTER TABLESPACE TEMP add TEMPFILE ' / d01/prd1/prd1data/tmp1.dbf' SIZE 2000 M REUSE AUTOEXTEND OFF;

  Tablespace altered.

  SQL > @$ORACLE_HOME/olap/admin/olap.sql SYSAUX TEMP

  BEGIN

  *

  ERROR on line 1:

  ORA-06553: PLS-801: internal error [56319]

  DECLARE

  *

  ERROR on line 1:

  ORA-06553: PLS-801: internal error [56319]

  BEGIN

  *

  ERROR on line 1:

  ORA-06553: PLS-801: internal error [56319]

  ===================================================================================

  Thank you.

  Please see the solution in (ORA-06553: PLS-801: internal error [56319], ORA-06544: PL/SQL: internal error, arguments: [56319] [] [], [], [], [], [], [], ORA-00604 when using different bit datafiles that executable Oracle (Doc ID 1436552.1)).

  Thank you

  Hussein

• ORA-06553: PLS-801: internal error [56319]

  Hello
  I opened my rman backup, not it works. (X 64)
  
  but when I need to delete a user, I got the error below,
  
  
  
  SQL > drop user ugur;
  Drop user ugur
  *
  ERROR on line 1:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-06553: PLS-801: internal error [56319]
  
  someone has an idea, please?

  Selam ugur

  This problem occurs every time if you 64B to the BONE to the 32 p.

  Since the package has been compiled on 64B OS version is necessary is a re - compile the correct version of the operating system. During the db has to go into upgrade mode.
  SQL > shutdown immediate;
  SQL > startup upgrade;
  SQL > @$ ORACLE_HOME/rdbms/admin/utlirp.
  SQL > shutdown immediate;
  SQL > startup;
  SQL > @ $ORACLE_HOME/rdbms/admin/utlrp.

  information on metalink Note: 414043.1, Note: 413484.1

  concerning

  Daniele Besiroglu

• Error PLS-00801: [phdcsql_print_kge_errors::parm pos] internal error while deploying card OWB

  Any deployment of an existing map of OWB, particularly in an environment (example B), I am facing this error message so that the same code works fine in another environment (say A).

  I tried importing the .mdl to another (A) environment where it works fine, imported in a B environment and attempted to deploy, has always given me same error message all in deployment.

  Help, please.

  Errors of compilation for BODY of PACKAGE *.

  Error: PLS-00801: internal error [phdcsql_print_kge_errors::parm pos]

  Line: 1

  Text: CREATE OR REPLACE PACKAGE BODY "*" AS

  Error: PL/SQL: statement ignored

  Line: 11

  Text: SELECT

  Error: PLS-00801: internal error [phdcsql_print_kge_errors::parm pos]

  Line: 1

  Text: CREATE OR REPLACE PACKAGE BODY 'MAP_DMT_CUST_COMPLAINT_UI' AS

  Error: PL/SQL: statement ignored

  Line: 709

  Text: SELECT

  Error: PLS-00801: internal error [phdcsql_print_kge_errors::parm pos]

  Line: 1

  Text: CREATE OR REPLACE PACKAGE BODY "*" AS

  Error: PL/SQL: statement ignored

  Line: 2332

  Text: MERGE

  Error: ORA-00900: invalid SQL statement

  ORA-00900: invalid SQL statement

  ORA-00900: invalid SQL statement

  Line: 1

  Text: CREATE OR REPLACE PACKAGE BODY "*" AS

  A table was missed and not imported in the OWB repository from which this table was not related. I imported this table, bounded to the search with the table operator and it worked fine.

  Somehow instead of give the real reason, she gave this vague error.

  I hope that this solution works for others :-)

• Lookup - XML () Xpath function defective - internal error XPath

  Hello
  
  I used lookup - xml () function Xpath to look up values from an XML file.
  
  When he finds a key in input value it works fine.
  
  But when he does not find a value for the specified key, it gives the error: internal error xpath.
  
  Code:
  
  oraext:Lookup-XML('oramds:/apps/GETSPRIVIFC/lov/ResourceCode.XML','/resource/ResourceCodes/ResourceCode','Name','Value',$input)
  
  Error:
  
  < exception class = "com.collaxa.cube.xml.xpath.XPathException" >
  XPath expression cannot run. An error occurs during the processing of the XPath expression
  expression; the expression is
  oraext:Lookup-XML('oramds:/apps/GETSPRIVIFC/lov/ResourceCode.XML','/resource/ResourceCodes/ResourceCode','Name','Value',$input).
  The XPath expression cannot run; the reason was: internal xpath error.
  Check the root cause of detailed described in the text of the exception message and
  Make sure the XPath query is correct.
  < cell >
  < f > com.collaxa.cube.xml.xpath.BPELXPathUtil.evaluate #262 < /f >
  < f > com.collaxa.cube.engine.ext.bpel.v1.wmp.BPEL1AssignWMP.__executeStatements #137 < /f >
  < f > com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform #158 < /f >
  < f > com.collaxa.cube.engine.CubeEngine._performActivity #2463 < /f >
  < f > com.collaxa.cube.engine.CubeEngine.handleWorkItem #1115 < /f >
  < f > com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal #73 < /f >
  < f > com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage #220 < /f >
  < f > com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory #328 < /f >
  < f > com.collaxa.cube.engine.CubeEngine.createAndInvoke #679 < /f >
  < f > com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke #103 < /f >
  < f > com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke #145 < /f >
  < f > com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean.syncCreateAndInvoke #111 < /f >
  < f > sun.reflect.GeneratedMethodAccessor4027.invoke < /f >
  < f > sun.reflect.DelegatingMethodAccessorImpl.invoke #25 < /f >
  < f > java.lang.reflect.Method.invoke #597 < /f >
  < f > com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed #149 < /f >
  < f >... < /f >
  < / stack >
  < / exception >
  < root class = "javax.xml.xpath.XPathExpressionException" >
  internal xpath error
  < cell >
  < f > oracle.xml.xpath.JXPathExpression.evaluate #242 < /f >
  < f > com.collaxa.cube.xml.xpath.BPELXPathUtil.evaluate #240 < /f >
  < f > com.collaxa.cube.engine.ext.bpel.common.BPELWMPHelper.evalFromValue #339 < /f >
  < f > com.collaxa.cube.engine.ext.bpel.v1.wmp.BPEL1AssignWMP.__executeStatements #137 < /f >
  < f > com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform #158 < /f >
  < f > com.collaxa.cube.engine.CubeEngine._performActivity #2463 < /f >
  < f > com.collaxa.cube.engine.CubeEngine.performActivity #2334 < /f >
  < f > com.collaxa.cube.engine.CubeEngine.handleWorkItem #1115 < /f >
  < f > com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal #73 < /f >
  < f > com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage #220 < /f >
  < f > com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory #328 < /f >
  < f > com.collaxa.cube.engine.CubeEngine.endRequest #4350 < /f >
  < f > com.collaxa.cube.engine.CubeEngine.endRequest #4281 < /f >
  < f > com.collaxa.cube.engine.CubeEngine.createAndInvoke #679 < /f >
  < f > com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke #103 < /f >
  < f > com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke #145 < /f >
  < f >... < /f >
  < / stack >
  < / root >

  This is the expected behavior. It be handled.

  Looks like you are using it for LOV, the best option is DVM.

  Based on the DS, there is an option for defaultValue, if the digital Voltmeter has no value, then the default value is sent back rather the exception.

  DVM:lookupValue(dvmLocation,sourceColumnName,sourceValue,targetColumnName,DefaultValue)

  http://docs.Oracle.com/CD/E15523_01/integration.1111/e10224/bp_appx_functs.htm

  Thank you
  Vijay

• error of static class

  I have a static class:

  package VO
  {
  public class ArrayValues
  {
  private static var instance: ArrayValues = new ArrayValues();
  
  nominal values will replace the first with English-language versions
  If the user clicks on "Spanish" they will be replaced with
  private var yesNoArray:Array = new Array('1','2');
  private var utilityArray:Array = new Array('1','2');
  
  public void ArrayValues()
  {
  error ("ArrayValues is called by its instance");
  }
  
  Public Shared function getInstance (): ArrayValues
  {
  return instance;
  }
  
  public function getYesNoArray (): Array
  {
  Return yesNoArray;
  }
  public void setYesNoArray(input:Array):void
  {
  yesNoArray = entry;
  }
  

  It is invoked here:

  import VOS. ArrayValues;
  import VOS. InputData;
  import VOS. InputLabels;
  
  [Bindable]
  public var saveData:InputData = InputData.getInstance ();
  
  [Bindable]
  168 public var getArrays:ArrayValues = ArrayValues.getInstance ();
  ...

  It generates this error:

  Error: ArrayValues is called by its instance
  to VO::ArrayValues() [C:\FSCalc\Flex\FSCalc\src\VO\ArrayValues.as:14]
  to VO: ArrayValues$ cinit)
  Global $init () [C:\FSCalc\Flex\FSCalc\src\VO\ArrayValues.as:3]
  components::InputForm() [C:\FSCalc\Flex\FSCalc\src\components\InputForm.mxml:168]
  in FSCalc / _FSCalc_InputForm1_i)
  in FSCalc / _FSCalc_Array6_c)
  ...

  What I am doing wrong?

  PS, it is normal to take almost 10 minutes a) go to your discussions, b) read a reply to a thread and c) come back to the normal discussion?  That seems excessive to me.

  If you try to reach singleton,

  Your manufacture should look like this,

  public void ArrayValues(access:SingletonEnforcer)
  {

  If (access is nothing)
  {
  error ("ArrayValues is called by its instance");
  }

  }

  a variable,

  public static private var _instance: ArrayValues;

  Public Shared function getInstance (): ArrayValues

  {
  If (_instance is nothing)
  {
  _instance = new ArrayValues (new SingletonEnforcer());
  }
  return _instance;

  }

  And another class in the same file,

  class SingletonEnforcer
  {
  }

• ORA-00600: internal error code, arguments: [17012] with function pipeline

  The package is containing a type of function and the table declaration.
  the function returns the type of the collection is in pipeline
  
  When I recompile the plu sql package I get this error
  ORA-00600: internal error code, arguments: [17012].

  Hello!

  There is a known bug 2280512. But this info is no longer valid for version 9.2 of the db... If this is the case (you have'n give your version of db) you need to pass your database to a higher version (9.2.0.8 is good enough confirmed of my practice)

  T

• Singleton and static class

  I found that some guy coded their static classes in their Flash programs such as this:

  package {}

  class SingletonEnforcer)

  }

  package {}

  SerializableAttribute public class StaticClass extends EventDispatcher {}

  private static var _staticClass:StaticClass;

  public void StaticClass (singletonEnforcer:SingletonEnforcer) {}

  nothing

  }

  Public Shared function getInstance (): {StaticClass}

  if(_staticClass == null)

  {

  _staticClass = new StaticClass (new SingletonEnforcer());

  }

  return _staticClass

  }

  }

  }

  And these days, I read some Flex project code as:

  package {}

  public class StaticClass {}

  protected public static var _instance:StaticClass;

  public void StaticClass () {}

  public static class

  }

  public static void get () of the instance: {StaticClass}

  If (_instance == null)

  {

  _instance = new StaticClass ();

  }

  return _instance

  }

  }

  }

  What is the difference between the two approaches? Why the SingletonEnforcer class is needed in the first case?
  Thanks in advance!

  singletonEnforcer is not necessary in the first example, and they could use one in the second example, if they wanted. With the help of the enforcer allows to raise an error in the constructor and say an error such as: singleton - use getInstance(); and using the initializer applies appropriate. In the second example, you can simply use the constructor and bypass the getInstance() method and no errors occur. They just leave it up to you, the developer, to use the getInstance(), method.

• Python, call DLLs in LabVIEW: Fatal internal error when accessing output String Cluster

  Hello

  We have compiled a DLL in LabVIEW (TestError.dll) and tried to call it from Python.

  TestError.dll includes 2 functions:

  1 testErreur: cluster 1 entry string, 1 channel indicator

  2 TestError2: 1 channel input, 1 bunch of output string

  What we try to do in Python is actually something like this:

  1 provide values to controls in the functions of the DLL.

  2. call the DLL.

  3 get the values of the indicators.

  What we have seen are:

  1 read/write operations on normal data types (string, digital) indicators/controls are OK

  2. write operation on the Cluster string entry is OK

  3. read operation on the Cluster output string is not OK. The following error is still prompted for:

  «Unrecoverable internal error: 'MemoryManager.cpp', line 437.» LabVIEW version 8.6... »

  Also joined the TestError.prj and python code.

  Grateful if someone can help to explain why we get this error and how to overcome?

  Thank you

  howmean

  What we have seen are:

  1 read/write operations on normal data types (string, digital) indicators/controls are OK

  2. write operation on the Cluster string entry is OK

  3. read operation on the Cluster output string is not OK. The following error is still prompted for:

  «Unrecoverable internal error: 'MemoryManager.cpp', line 437.» LabVIEW version 8.6... »

  Also joined the TestError.prj and python code.

  It is very logical that it does not, and the bad news is, it cannot really be implemented reliable of a process not LabVIEW.

  LabVIEW channels (and tables) are very specific species. They are then called handles, which are pointers to a pointer to a block of memory. If you have a control or indicator on its own, the Prototype configuration allows you to configure this setting as a C. LabVIEW data pointer, when creating the DLL, create heels C for each exported function and place the code to do the translation between the past C pointer to and necessary LabVIEW data handle. For strings and arrays within the cluster, there is no configuration option and the DLL is expected to pass a structure with data handles native LabVIEW in there.

  You may say that creating handles data in your calling process enough to trick LabVIEW. For the input variables that actually CAN sometimes work (but is a delicate and dangerous generally to handle this). There is no way to make it work for output variables. LabVIEW will try to resize handle to fill data in that he wants to make. This resizing is done using internal memory manager of LabVIEW. This will work only if it had been allocated by EXACTLY the same instance of the memory manager. Otherwise, it refers to a different memory segment and catastophally fail. The only way to make this work perhaps, with luck, taking your heart and prayer to the gods, is to lvrt.dll to allocate a handle that you must pass to the DLL. Still find the good lvrt.dll, which will execute your DLL LabVIEW is a major challenge.

• Cannot use casting "to more specific class ' function to the parent class of child class

  Hello

  I am using OOP for my request for data acquisition. I have different e/s analog and digital materials. I create a superclass named DAQ.lvclass. This class has four childs: analog in out analog, digital, and Digital Out. I am trying to invoke screws of the child of the parent class's class. For that I am throwing the class parent her child to aid "to a more specific class' function. But I get the below error.

  Error 1448 occurred at the more class specific in DAQ.lvclassMain.vi AQ

  Possible reasons:

  LabVIEW: Bad type cast. LabVIEW does not deal with the run-time value of this class of LabVIEW as an instance of the given class of LabVIEW.

  How can I handle these cases where I have to call child VI of the parent member?

  I have attached two screws 1 snapshot. Main DAQ: it's the class main VI parent who manages all functions. 2. read the analog inputs: this VI trying to set the parent class for its class of the child and child vi reads value of data acquisition task. I get the second error off VI.

  Kindly help.

  Honestly, I have NO idea on what you want to do.

  Inheritance of classes in EACH OOD (object-oriented design) requires to define common ground as the parent class. Children can add things like properties and methods.

  If you set children who have no points in common, you have made a mistake.

  If all children have too many different specific methods, your OOD is absent.

  Example:

  Parent defines the method A.

  1 child adds the B method.

  Child 2 adds method C.

  But method B will not be usable on 2 children while method C will not work with 1 child.

  It is an approach that you want to prevent. In any programming language oriented OBJECT. This adds unnecessary complexity leading to difficult to maintain the code, and it is prone to errors.

  However, if you're going to do, "to more specific class ' is the correct type cast. But your screenshots and error messages, it is obvious that refine you a particular child's casting only. You must extend the code to check the real child, specifically expressed and call the method. That being said, your code increases the complexity you want to add a bunch of case of structures which essentially nihilates all THE BENEFITS of the use of OOP.

  I'm sorry to say that.

  Norbert

• Internal error 2738 when uninstalling Biztalk 2006 on Win 7

  I have a win 7 32 bit laptop which has Biz Talk 2006 R2 installed. When you try to uninstall the Biz Talk 2006 R2, I get an error "internal error 2738". I tried to register the dll using regsvr32 vbscript.dll vbscript, but that also has not solved the problem. I tried to look it up to various articles, but I'm not able to find a solution to this problem.

      

  I was able to solve the problem. Apparently, the problem was not with the VBScript.dll file which not saved. It was with the dll of vbscript being registered as a user instead of the machine. When the dll is registered as a normal user, it is registered under the USER in the registry settings. Deleting the record using the following command to be solved the problem and I managed to uninstall Biz Talk.

  Order: "reg delete/f"HKCU\SOFTWARE\Classes\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8}"

• An internal error occurred during: packaging

  Hello

  Recently, I've had my machine upgraded to Windows 7, which mean't I had to reinstall the Eclipse Plugin. I get the following error when I try to launch the simulator using JRE 5.0.

  'Packaging Blackberry Simulator' has encountered a problem.

  An internal error occurred during: "Packaging Blackberry Simulator."

  When I click on the 'Détails' button, I get the following error message:

  An internal error occurred during: "packaging BlackBerry Simulator.
  java.lang.NullPointerException

  In the Console pane, I get the following error message:
  I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  My installed software are:
  Blackbery Java Plug-inc (core) 1.5.0.201112201607
  BlackBerry Java SDK 7.0.0.33
  Eclipse SDK 3.6.2.M20110210 - 1200

  In the Package Explorer, I use:
  "[BlackBerry JRE 5.0.0] JRE System Library

  In the preferences for the parameters of compiler, I put the
  The compiler compliance level for: 1.3

  In Run Configurations, I got the JRE the value:
  BlackBerry JRE 5.0.0

  My CLASSPATH Windows is:

  C:\oracle\product\11.2.0\Client_1\bin;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Common Files\Ulead Systems\MPEG; C:\Program Files (x 86) \QuickTime\QTSystem\; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Program Files\TortoiseSVN\bin

  Here's my configuration details of Eclipse:

  Date: Thursday, March 8, 2012 09:52:08 EST

  Information on the platform:

  System properties:
  awt. Toolkit = Sun.awt.Windows.WToolkit
  Eclipse.application = org. Eclipse.UI.IDE.Workbench
  eclipse.buildId = M20110210-1200
  Eclipse.Commands = - os
  Win32
  -ws
  Win32
  -arch
  x 86
  -showsplash
  C:\EclipsePlugin\\plugins\org. Eclipse.platform_3.6.2.v201102101200\splash.bmp
  -Launcher
  C:\EclipsePlugin\eclipse.exe
  -name
  Eclipse
  -launcher.library
  C:\EclipsePlugin\\plugins/org. Eclipse.Equinox.Launcher.Win32.Win32.x86_1.1.2.R36x_v20101222\eclipse_1312.dll
  -Start
  C:\EclipsePlugin\\plugins/org. Eclipse.Equinox.launcher_1.1.1.R36x_v20101122_1400.jar
  -vm
  C:\Program Files (x86)\Java\jre6\bin\client\jvm.dll
  Eclipse.Home.Location=file:/C:/EclipsePlugin/
  Eclipse.Launcher=C:\EclipsePlugin\eclipse.exe
  Eclipse.Launcher.Name = Eclipse
  [email protected]/... /P2/
  Eclipse.P2.Profile = SDKProfile
  Eclipse.Product = org. Eclipse.Sdk.IDE
  eclipse.startTime = 1331218090367
  Eclipse.VM = C:\Program files (x86)\Java\jre6\bin\client\jvm.dll
  Eclipse.vmargs = - XX:MaxPermSize = 512 m
  -Xms40m
  -Xmx512M
  -Djava.class.Path=C:\EclipsePlugin\\plugins/org. Eclipse.Equinox.launcher_1.1.1.R36x_v20101122_1400.jar
  Equinox.use.DS = true
  leader. Encoding = Cp1252
  leader. Encoding.pkg = Sun.IO
  leader. Separator =.
  Java.awt.graphicsenv = Sun.awt.Win32GraphicsEnvironment
  Java.awt.PrinterJob = Sun.awt.Windows.WPrinterJob
  Java.class.Path=C:\EclipsePlugin\\plugins/org. Eclipse.Equinox.launcher_1.1.1.R36x_v20101122_1400.jar
  Java.class.version = 50.0
  Java.endorsed.dirs=C:\Program files (x 86) \Java\jre6\lib\endorsed
  Java.ext.dirs=C:\Program files (x 86) \Java\jre6\lib\ext; C:\Windows\Sun\Java\lib\ext
  Java.Home = C:\Program files (x 86) \Java\jre6
  Java.IO.TMPDIR=C:\Users\sreid\AppData\Local\Temp\
  Java.Library.Path=C:\EclipsePlugin; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:/Program Files (x 86) / Java jre6/bin/client /. C:/Program Files (x 86) / Java/jre6/bin; C:/Program Files (x 86) / Java/jre6/lib/i386; C:\oracle\product\11.2.0\Client_1\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Common Files\Ulead Systems\MPEG; C:\Program Files (x 86) \QuickTime\QTSystem\; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Program Files\TortoiseSVN\bin; C:\EclipsePlugin;.
  Java.Runtime.Name = Java (TM) SE Runtime Environment
  Java.Runtime.version = 1.6.0_31 - b05
  Java.Specification.Name = Java platform API specification
  Java.Specification.Vendor = Sun Microsystems Inc.
  Java.Specification.version = 1.6
  Java.Vendor Sun Microsystems Inc. =.
  Java.Vendor.URL =http://java.sun.com/
  Java.Vendor.URL.bug =http://java.sun.com/cgi-bin/bugreport.cgi
  Java.version = 1.6.0_31
  Java.VM.info mode = Mixed
  Java.VM.Name = Java VM Client
  Java.VM.Specification.Name = Java Virtual Machine specifications
  Java.VM.Specification.Vendor = Sun Microsystems Inc.
  Java.VM.Specification.version = 1.0
  Java.VM.Vendor = Sun Microsystems Inc.
  Java.VM.version = 20.6 - b01
  Line.Separator =

  org.eclipse.debug.ui.breakpoints.toggleFactoriesUsed = false
  org. Eclipse.Equinox.Launcher.Splash.Location=C:\EclipsePlugin\\plugins\org. Eclipse.platform_3.6.2.v201102101200\splash.bmp
  org.eclipse.equinox.simpleconfigurator.configUrl = filerg.eclipse.equinox.simpleconfigurator/bundles.info
  org. Eclipse.Update.Reconcile = false
  org. OSGi.Framework.ExecutionEnvironment=OSGi/minimum-1.0,OSGi/minimum-1.1,OSGi/minimum-1.2,JRE-1.1,J2SE-1.2,J2SE-1.3,J2SE-1.4,J2SE-1.5,javase-1.6
  org. OSGi.Framework.Language = in
  org. OSGi.Framework.OS.Name = Windows7
  org. OSGi.Framework.OS.version = 6.1.0
  org. OSGi.Framework.Processor = x 86
  org.osgi.framework.system.packages=javax.accessibility,javax.activation,javax.activity,javax.annotation,javax.annotation.processing,javax.crypto,javax.crypto.interfaces,javax.crypto.spec,javax.imageio,javax.imageio.event,javax.imageio.metadata,javax.imageio.plugins.bmp,javax.imageio.plugins.jpeg,javax.imageio.spi,javax.imageio.stream,javax.jws,javax.jws.soap,javax.lang.model,javax.lang.model.element,javax.lang.model.type,javax.lang.model.util,javax.management,javax.management.loading,javax.management.modelmbean,javax.management.monitor,javax.management.openmbean,javax.management.relation,javax.management.remote,javax.management.remote.rmi,javax.management.timer,javax.naming,javax.naming.directory,javax.naming.event,javax.naming.ldap,javax.naming.spi,javax.net,javax.net.ssl,javax.print, javax.print.attribute,javax.print.attribute.standard,javax.print.event,javax.rmi,javax.rmi.CORBA,javax.rmi.ssl,javax.script,javax.security.auth,javax.security.auth.callback,javax.security.auth.kerberos,javax.security.auth.login,javax.security.auth.spi,javax.security.auth.x500,javax.security.cert,javax.security.sasl,javax.sound.midi,javax.sound.midi.spi,javax.sound.sampled,javax.sound.sampled.spi,javax.sql,javax.sql.rowset,javax.sql.rowset.serial,javax.sql.rowset.spi,javax.swing,javax.swing.border,javax.swing.colorchooser,javax.swing.event,javax.swing.filechooser,javax.swing.plaf,javax.swing.plaf.basic,javax.swing.plaf.metal,javax.swing.plaf.multi,javax.swing.plaf.synth,javax.swing.table,javax.swing.text,javax.swing.text.html,javax.swing.text.html.parser,javax.swing.text.rtf, javax.swing.tree,javax.swing.undo,javax.tools,javax.transaction,javax.transaction.xa,javax.xml,javax.xml.bind,javax.xml.bind.annotation,javax.xml.bind.annotation.adapters,javax.xml.bind.attachment,javax.xml.bind.helpers,javax.xml.bind.util,javax.xml.crypto,javax.xml.crypto.dom,javax.xml.crypto.dsig,javax.xml.crypto.dsig.dom,javax.xml.crypto.dsig.keyinfo,javax.xml.crypto.dsig.spec,javax.xml.datatype,javax.xml.namespace,javax.xml.parsers,javax.xml.soap,javax.xml.stream,javax.xml.stream.events,javax.xml.stream.util,javax.xml.transform,javax.xml.transform.dom,javax.xml.transform.sax,javax.xml.transform.stax,javax.xml.transform.stream,javax.xml.validation,javax.xml.ws,javax.xml.ws.handler,javax.xml.ws.handler.soap,javax.xml.ws.http,javax.xml.ws.soap,javax.xml.ws.spi,javax.xml.ws.wsaddressing, javax.xml.xpath,org.ietf.jgss,org.omg.CORBA,org.omg.CORBA_2_3,org.omg.CORBA_2_3.portable,org.omg.CORBA.DynAnyPackage,org.omg.CORBA.ORBPackage,org.omg.CORBA.portable,org.omg.CORBA.TypeCodePackage,org.omg.CosNaming,org.omg.CosNaming.NamingContextExtPackage,org.omg.CosNaming.NamingContextPackage,org.omg.Dynamic,org.omg.DynamicAny,org.omg.DynamicAny.DynAnyFactoryPackage,org.omg.DynamicAny.DynAnyPackage,org.omg.IOP,org.omg.IOP.CodecFactoryPackage,org.omg.IOP.CodecPackage,org.omg.Messaging,org.omg.PortableInterceptor,org.omg.PortableInterceptor.ORBInitInfoPackage,org.omg.PortableServer,org.omg.PortableServer.CurrentPackage,org.omg.PortableServer.POAManagerPackage,org.omg.PortableServer.POAPackage,org.omg.PortableServer.portable,org.omg.PortableServer.ServantLocatorPackage,org.omg.SendingContext, org.omg.stub.java.rmi,org.w3c.dom,org.w3c.dom.bootstrap,org.w3c.dom.css,org.w3c.dom.events,org.w3c.dom.html,org.w3c.dom.ls,org.w3c.dom.ranges,org.w3c.dom.stylesheets,org.w3c.dom.traversal,org.w3c.dom.views,org.w3c.dom.xpath,org.xml.sax,org.xml.sax.ext,org.xml.sax.helpers
  org. OSGi.Framework.Vendor = Eclipse
  org. OSGi.Framework.version = 1.5.0
  org. OSGi.supports.Framework.extension = true
  org. OSGi.supports.Framework.fragment = true
  org. OSGi.supports.Framework.requirebundle = true
  OS. Arch = x 86
  OS. Name = Windows 7
  OS.version = 6.1
  OSGi.Arch = x 86
  OSGi.bundles = Reference:file: net. RIM.ejde.Preprocessing.hook_1.5.0.201112201607/,Reference:filerg.eclipse.equinox.simpleconfigurator_1.0.200.v20100503.jar@1:start
  osgi.bundles.defaultStartLevel = 4
  OSGi.bundlestore=C:\EclipsePlugin\configuration\org. Eclipse.osgi\bundles
  OSGi.Configuration.Area=file:/C:/EclipsePlugin/configuration/
  OSGi.Framework=file:/c:/EclipsePlugin/plugins/org. Eclipse.osgi_3.6.2.R36x_v20110210.jar
  OSGi.Framework.extensions = Reference:file: net. RIM.ejde.Preprocessing.hook_1.5.0.201112201607/
  OSGi.Framework.Shape = jar
  OSGi.Framework.version = 3.6.2.R36x_v20110210
  osgi.frameworkClassPath =., file:c:/EclipsePlugin/plugins/net.rim.ejde.preprocessing.hook_1.5.0.201112201607/., file:c:/EclipsePlugin/plugins/net.rim.ejde.preprocessing.hook_1.5.0.201112201607/lib-ext/asm-3.1.jar, file:c:/EclipsePlugin/plugins/net.rim.ejde.preprocessing.hook_1.5.0.201112201607/lib-ext/asm-tree-3.1.jar
  OSGi.Install.Area=file:/C:/EclipsePlugin/
  OSGi.instance.Area=file:/C:/Users/sreid/documents/Workspace/
  OSGi.instance.Area.default=file:/C:/Users/sreid/Workspace/
  OSGi.LogFile=C:\Users\sreid\Documents\workspace\.metadata\.log
  OSGi.manifest.cache=C:\EclipsePlugin\configuration\org. Eclipse.osgi\manifests
  OSGi.nl = en_US
  OSGi.OS = Win32
  osgi.splashLocation=C:\EclipsePlugin\\plugins\org.eclipse.platform_3.6.2.v201102101200\splash.bmp
  osgi.splashPath=platform:/base/plugins/org.eclipse.platform
  OSGi.syspath=c:\EclipsePlugin\plugins
  OSGi.tracefile=C:\Users\sreid\Documents\workspace\.metadata\trace.log
  OSGi.WS = Win32
  Path.Separator =;
  Sun.Arch.Data.Model = 32
  Files Sun.Boot.class.Path=C:\Program (x86)\Java\jre6\lib\resources.jar; C:\Program Files (x86)\Java\jre6\lib\rt.jar; C:\Program Files (x86)\Java\jre6\lib\sunrsasign.jar; C:\Program Files (x86)\Java\jre6\lib\jsse.jar; C:\Program Files (x86)\Java\jre6\lib\jce.jar; C:\Program Files (x86)\Java\jre6\lib\charsets.jar; C:\Program Files (x86)\Java\jre6\lib\modules\jdk.boot.jar; C:\Program Files (x 86) \Java\jre6\classes
  Sun.Boot.Library.Path=C:\Program files (x 86) \Java\jre6\bin
  Sun.CPU.endian = Little
  Sun.CPU.isalist = pentium_pro + MMX pentium_pro pentium + pentium mmx i486 i386 i86
  Sun.Desktop = Windows
  Sun.IO.Unicode.Encoding = UnicodeLittle
  Sun.JNU.Encoding = Cp1252
  Sun.Management.Compiler = hotspot Client compiler
  Sun.OS.patch.Level = Service Pack 1
  User country = US
  User .dir = C:\EclipsePlugin
  User.Home=C:\Users\sreid
  User .language = in
  User = sreid .name
  User .TimeZone = America/New_York
  User.Variant =

  Features:
  net.rim.EclipseJDE (1.5.0.201112201607) BlackBerry Java plug-in»
  NET.RIM.ejde.Feature.componentpack7.0.0 (7.0.0.33) "BlackBerry Java SDK version 7.0.0.
  org. Eclipse.CVS (1.2.1.r362_v20101111 - 7B77FKv99HL0GvIAF99I8H14B7E) 'Eclipse CVS Client'
  org. Eclipse.Help (1.2.1.r362_v20101111 - 7e7jEVFDr6xg-LSlC_z0w1D) "help system Base.
  org. Eclipse.JDT (3.6.2.r362_v20101117 - 0800-7z8XFW6FLFlmjJcvz03jyeFBLS_F) "Eclipse Java development tools.
  org. Eclipse.PDE (3.6.2.r362_v20110203 - 7b7mFL2FET3dhHalh1iNZtL) "EDP".
  org. Eclipse.Platform (3.6.2.r362_v20110210 - 9gF78Gs1FrIGnHDHWkEcopoN8AmxeZflGDGKQi) "Eclipse Platform.
  org. Eclipse.RCP (3.6.2.r362_v20101104 - 9SAxFMKFkSAqi8axkv1ZjegmiBLY) "Eclipse RCP.
  org. Eclipse.SDK (3.6.2.r362_v20100929 - 7Q7m7HD5cWlFgdCBHllpZMd2M468sbnm2RJvUWIbiJnWC) "Eclipse Project SDK.

  PS.

  Do you know how to check if I'm using a 32-bit version of java?

  Thanks for any help,

  Steve

  It is resolved, the problem was the level of compliance of the compiler, which unknown to me can be set in two places; a global (windows-> preferences-> compiler) and the other at the level of the project (right click on the folder of your project-> build path-> configure build path-> java compiler).

• Installation of DirectX 11 "an internal error has occurred."

  I tried for hours to play BioShock infinite, but every time I open it it says that it needs directx11. I clicked on run-> directdiag-> and he said I have directx 11. So I went to download directx11, and when I install it, it comes with an error saying "an internal error has occurred." He also says to check the logs of windows, so I did and that's what I came with...

  --------------------
  [31/03/13 20:44:38] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [31/03/13 20:44:38] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  --------------------
  [31/03/13 20:46:47] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [31/03/13 20:46:47] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  How can I fix? I'm extremely tired of trying.

  Hi Lee,.

  Please contact the Microsoft Community.

  I would have you to make reference to the 'most useful answer' in this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/DirectX-Setup-an-internal-system-error-occurred/c65dfdc5-68d8-44FA-B28F-240812be21a5

  Note: Be sure to only replace the link in the suggestions with this.

  We know if that helps you.