Status becomes Online start-up following the last update

Similar Questions

• When I open a web page or a new tab or click on a tab title and open I hear a strange, it does that start happening since the last update for firefox 38.0.

  I have just recently started to get a sound strange, something this show every time I opened then switch to this new tab, it does not occur with each tab, how can I stop this

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Time capsule starts only after the last update

  My Time Capsule (A1409, 2 TB) is do not restart after having applied the most recent update. Has worked for years in my small locker in the basement connected to my local network. Fan seems to be working (vibrations of feeling) which connection to the power source, but the LED shows NO color. HW-Reset either doesn't help not. Probably from power supply? As the machine is not under warranty, what are my options (all) to retrieve the data on it?

  Other options apart from opening and get the HD out and connect it to a USB box to retrieve the data?

  What is the best way to transfer the existing backups to a new capsule so that (ideally) my 4 existing Mac can pickup their backup where they went before?

  Thanks for any input / advice / tips.

  Bonus question: any practice of best approaches on the Capsule of backup for the future (for example via a connected USB drive)?

  I intend to buy a new (although my NAS (QNAP) would support Time Machine backups, I don't plan to use it, not even for a double-backup-strategy).

  Probably from power supply?

  Vibration isn't the hard drive running... the fan... feeding is very well... the jury has no... was triggered by the update of the firmware, it would have happened soon anyway.

  What are my options (all) to retrieve the data on it?

  You MUST open the TC... There is no way to access the data except in order to open it... However, you can repair the TC using this method.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  It sounds gross... but has a long history in the world of Apple as a faulty weld is not a new problem.

  What is the best way to transfer the existing backups to a new capsule so that (ideally) my 4 existing Mac can pickup their backup where they went before?

  We recommend that you do NOT. It is often not successful and it is better to keep an archive on a USB drive for a few months and once you have a decent amount of history to put the USB back to other uses.

  You can copy the sparsebundle to each computer... Apple has a set of instructions--small as usual.

  Backups transfer TM...

  Doco Apple. http://support.Apple.com/kb/ht5097

  Pondini doco http://pondini.org/TM/18.html

  Any practice of best approaches on the Capsule of backup for the future (for example via a connected USB drive)?

  A TC has only a function of archive built in. Whenever you press on archive it backs up the entire TC on USB... not possible for incremental backup.

  You can work around this by using Carbon Copy Cloner... which can save almost anything to almost anywhere... However, it is extremely slow more wireless when the backup drive is plugged into the USB TC rather than on the computer... To copy all packages to TC on computer... computer to TC... TC on the USB drive.

  On ethernet, it is full duplex and should work ok... but it is always faster to plug the drive into the Mac and so you travel go simple package.

  I intend to buy a new (although my NAS (QNAP) would support Time Machine backups, I don't plan to use it, not even for a double-backup-strategy).

  I would certainly use the QNAP but with Carbon Copy Cloner rather than Time Machine. It is much more reliable and flexible... Although it lacks the possibility of several version of TM.

  A dual strategy of backup using TM and CCC is well worth... make clones bootable from all your computers on USB auto powered 2.5 "drives suitable size for each computer.

• Following the last update how to quit Firefox without blocking down

  Type of computer: Mac BookPro Mac OS X 10.6.8 Version
  I use the Mac Safari & Firefox browsers for blogs. Since yesterday when I downloaded the update to Mozilla Firefox, I am unable to exit Firefox at all (No button or tab to select an exit to get back to the office and Safire). To exit Firefox I have to press the button exit manual to restart the computer. I need a release of Firefox link to enter again the Safire browser and the desktop without closing the computer.

  I use Windows, so I don't know, but could check you this:

  If you click on the button '3-bar' menu of the main toolbar, when the Panel opens, there should be a button on the lower right corner of the menu to exit Firefox. Is it on Mac?

• Apply the last update of LightRoom (2015.10.15) and now extreme lag when you change any photo.

  Roulette is displayed with all attempts to modify, even to move the limits of harvest or slide show.  Cannot change anything in Lightroom without roulette appearing and wait for the application to work.  It started immediately after the last update.  Everyone knows the question?

  Try to uncheck the option Preferences > General > display the Photos to add.  According to the Lightroom Queen Victoria, this option can cause general slowth.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Just DLd CD player. Now, nothing will be printed. I also get error app for Windows (0xc0000022) whenever I start CD player. I uodated download of the last update and tried an auto repair. Using Win 7 Pro 64 bit machine.

  Just DLd CD player. Now, nothing will be printed. I also get error app for Windows (0xc0000022) whenever I start CD player. I uodated download of the last update and tried an auto repair. Using Win 7 Pro 64 bit machine. I tried several printers and I can test printing from other applications such as Outlook and Wordpad.

  None of this has worked. I have to get rid of the error (0 x 000022) and he got good printing. I did clean the Adobe Reader DC machine, reinstalled drive XI 11.0.10 and in the preferences to disabled Adobe protected in Security (Enhanced) Mode and set "view documents I have PDF/A mode" forever in the Documents tab...

  It seems that each player version as it becomes more complex (with the "features enhanced security") gets more unstable.

  I'll try Adobe Reader DC when I eventually have to WIN 10 which is never if all goes well.

• After the last update, the start photoshop it gets for minutes flashes.

  After the last update or after you install the "fuse" CC, the start Photoshop it gets during the minutes flashes. You can't do anything until it stops flashing. It is impossible to work with him. Because there are times that even after you have opened the file it is as if I had something working and takes too much time to perform any operation. And displays an error message. keeps flashing and press 'ESC' to stop and get something. But still, he said, showing the cursor how had tried to open something in the background. One of the moments where I started Photoshop appeared to show two fields seemed 'user' and 'password '.  I tried to remove and reinstall and nothing... still the same thing.

  I installed a previous version of the application to not stop working. I expect a solution to the problem to reinstall the latest version.

  S.O.: Windows 10

  Hardware: Dell Inspiron 5421 - i7 / 8G RAM / Nvidia GT 730 M 2 G

  Thank you

  L.Roma

  I don't think that's the problem. I solved the problem by using an earlier version, while the youngest is not corrected.

  To install an older version I do the following:
  1. open a creative cloud application
  2. in front of 'Find Apps more' I click on "Applications" and change to "show other version."
  3. I have local "Photoshop" and I click on the 'Install' button and chose an older version, in my case, I prefer "CC (2014).
  4. wait for install and now I work normally.

  I hope this has helped.

  Kind regards

  L. Roma

• I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

  original title: game Fallout 3 on Windows 7 problem

  I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

  Hello

  You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

  Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

  You may need to contact the manufacturer of game for support

• Since the last update will not start using 3 gb switch.

  From the windows of the last update we cannot start Windows XP (SP3) x 32 using the/3 gb switch. What is happening on three different computers. We need the switch / 3 gb to properly run SolidWorks.

  We have finally "solved" the question of rolling back our video drivers. I'm at home right now so I don't know the exact nVidia video card or driver, as far as I know, it's that they came on ready Solidworks HP workstations. I also know that we had been turn most recent for a year with no problems drivers until this update of Windows one did what he did. Just for fun, I reinstalled the latest driver once and once more the switch / 3 gb stop working.

• Windows 7 starts with a black screen (since the last update), if I go to the Task Manager.

  * Original title: startup error

  Windows 7 starts with a black screen (since the last update), if I go to the Task Manager and processes there are 2 sessions of "run once container" if I stop or another (they are two different size) windows lights up normally.

  Can someone help me please?

  Hello

  Thank you for the information.

  System Restore helped to heal the cause (last option of course)

  not sure about the Windows update that seemed to start the problem, but it is 2 instances of run once Wrapper were running.   I have found that if black screen you started the Task Manager, then selected and close it, either run it once windows Wrappers would begin.

  Anyway thanks for your help, we are now healed.

• Since the last update, windows Explorer (start bar, windows, etc.) won't start when you wake up from sleep.

  17/09/2012

  Since the last automatic update, my laptop won't automatically sleep when the lid is closed. And when opened the lid of his sleep, there is no current windows; No start bar, no application. So all I can do is ctrl alt del or start L so I can restart my laptop.

  I think that the last update caused this, since there was no prior dysfunction. .

  popular considerations. .

  JLL

  Notice: I discovered that the problem was not caused by updates, but by instant replay. Disregard this message...

  Thank you.

• Bridge is no longer starts after the last update

  Hello

  After the last update of CC 2015.5 bridge will start is no longer. I get the window that shows that "Adobe Bridge CC unexpectedly quit' almost immediately. Of the window:

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x000000000000000c

  Note the exception: EXC_CORPSE_NOTIFY

  Have uninstalled and reinstalled. preferences ransacked without success. I am running the latest version of the operating system. CC of other apps that I use (PS, I, ID) seem to work. 5 Bridge works fine.

  Any help would be appreciated.

  Thank you

  Ted

  Hi all

  We published a new version of Adobe Bridge (CC 2015) on July 19, 2016. This update is available via the Adobe Creative Cloud application.

  We addressed some crash bridge issues experienced on the launch of the application. Please try the new version and are looking for the crash problems you encountered.

  If you are not able to locate the bridge (CC 2015) on the creative cloud application, you will need to update the creative cloud application and restart your computer.

  Thank you

  Deepak Gupta

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey