Steps of Configuration of SNMP in Oracle 10 g installed on HP - UX

Similar Questions

• Authorization of 'change step list Configurations! -Still a bug?

  I did research on a problem we have regarding our developers are able to edit list step configurations.

  My problem is the same that this bug is entered in 2007.

  Authorization of 'change step list Configurations!

  http://forums.NI.com/NI/board/message?board.ID=330&message.ID=15230

  This bug was already registered or addressed?

  We use an external database to store the names of users and their group. If Privileges.Configure.GrantAll is not assigned by the developer group, described in the linked post buttons are grayed out.

  We prefer developers do not have the ability to edit the users, but they must be able to customize the appearance of the development environment.

  The bug was recorded (inside CAR #52133), but it has not yet been addressed.

• Configuration of SNMP Traps

  Hey guys,.

  Can you explain to me - or point me in the direction - where I can be better able to determine the difference between the following keys.

  config config enable SNMP traps
  config-copy Copy config enable SNMP traps
  config-ctid enable SNMP config-ctid traps
  config-copy Copy-config enable SNMP traps

  Thank you

  Nik

  The trap of the 'config' allows the ciscoConfigManEvent notification, which is triggered when you exit the configuration mode or make a SNMP set.

  "Config-copy" and "copy-config" traps are the same on different platforms and activates the ccCopyCompletion trap and fires when a copy of configuring through SNMP operation ends.

  The trap of "config-ctid" allows the ccmCTIDRolledOver or ciscoConfigManCTIDNotifyGroup, which seems to be related to the functionality of changing the configuration identifier of follow-up .

• C4780 omitting step of configuration of wireless network

  Hi at all - no matter what I try, connect get the C4780 from the step network configuration.  All abstracts of the report status come back negative - "Cannot retrieve intellectual property."

  The wireless network is hosted by a DLINK DI-624 with WPA - PSK encryption. HOWEVER (!), I'm ONLY using the 624 as access point and not like the firewall/gateway to my ISP (verizon FIOS).  The real gateway is a DLINK DI-604 with an IP 192.168.0.1.  The DI-624 has a different IP address static (.15 in this case) without WAN connection.  The FIOS WAN is connected to the 604 and the 604 provides the DHCP service.  The DHCP service on the 624 (wireless) is off - it's just acting as a wireless access point.

  For the curious, the reason is that we only run the wireless when we need as the House is especially wired.

  This wireless setup works fine for all other devices that we tried (portable computers of all sorts.), the iPods of all kinds, games, etc.

  But not for this printer.  Question - is this printer assuming that the wireless access point _is_ the entry door?  Is there anything else I can try?  Thank you very much in advance!

  Amazing - I'm speechless.

  On the implication that the C4780 requires WPA2, I started looking into that.  It turns out that apparently verizon FIOS in the old days (for how long I don't know) used routers wireless DI-624 (revC), which is what I have.  I got their share.

  These routers _do_ WPA2 support out-of-the-box, but _not_ to verizon!  It seems that verizon charge their own copy of the firmware on the device before giving it to customers.  Their version of the firmware does not supports WPA2.  Also, their version does not support other options native dlink.

  In addition, the firmware upgrade process has apparently a security check where incompatible updates are rejected.

  Then, try to install the real dlink firmware to get the support of WPA2 by downloading just the dlink firmware does not work.  Instead, one must "jailbreak" the DI - 624 by doing a hard reset that removes everything.  This leaves the open unit to install any firmware (an implication being that if a bad firmware is loaded, one can brick the device).  So after a hard reset, I installed the firmware dlink real, re-configured as an AP with WPA2.

  And tada, it works!

  As a minor side note, everything works except to go to the page interface web printer via a device wired (it seems to me that to get the printer Web page needs a wireless device).  However, this is not a problem.  This works.

  Thanks a lot for the persistence and time to support this list.

  p.s. Here is a link to find out how to reset the DI-624 and load new firmware:

  http://www.dslreports.com/Forum/remark, 11672142? Hilite = di + 624 + firmware

• E.M.P. Configurator windows crashes after Oracle Instance screen 11.1.2.2

  eHi,

  We intend to install the bases and the IR Services.

  We are able to properly configure all components, but because of the lack of space in the disc last configuration web server is down

  After that space is provided when we open EMP Configurator is crashing after Oracle Instance screen and does not go any further.

  We saw.the error in configtool.log below

  []] [2014 05-27 T 03: 23:40.177 - 07:00] [EPMCFG] [PATH] [EPMCFG-05935] [oracle. EPMCFG] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] [loading CT documents] task was completed. Seconds of execution time [0] [2014-05 - 27 T 03: 23:40.380 - 07:00] [EPMCFG] [PATH] [EPMCFG-05935] [oracle. EPMCFG] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] [storage Init] task was completed. Seconds of execution time [0] [2014-05 - 27 T 03: 23:40.427 - 07:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle. EPMINS] [tid: 12] [ecid: 0000KOxDDHi7Q9gpLCk3ye1JX6UY000000, 0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: unexpected error: [[java.lang.NullPointerException at com.hyperion.cis.config.Configurator.loadClasses(Configurator.java:99) at com.hyperion.cis.config.Configurator.initialize(Configurator.java:91) at com.hyperion.config.wizard.impl.ToConfigurationState$ 1.commit(ToConfigurationState.java:80) to com.hyperion.hit.wizard.Wizard$ (Wizard.java:544) NextClass.run to java.lang.Thread.run(Thread.java:662)]]

  and underneath the error in configTool - stderr.log

  D:\Oracle\Middleware\user_projects\epmsystem1/import_export does not exist or is not a directory java.util.logging.ErrorManager: 1: oracle.core.ojdl.LoggingException: unable to write in the newspaper "D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configtool-http-ant.log": java.io.IOException: there is not enough space on the drive to oracle.core.ojdl.FileLogWriter._writeBytes(FileLogWriter.java:461) to oracle.core.ojdl.FileLogWriter.writeBytes(FileLogWriter.java:391) to oracle.core.ojdl.BufferedLogWriter.writeToBuffer(BufferedLogWriter.java:335)

  Even if the space available is now EMP Configurator crashes. Help, please.

  D:\Oracle\Middleware\user_projects\epmsystem1/import_export does not exist or is not a directory java.util.logging.ErrorManager: 1: oracle.core.ojdl.LoggingException: unable to write in the newspaper "D:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\config\configtool-http-ant.log": java.io.IOException: there is not enough space on the disk to oracle.core.ojdl.FileLogWriter._writeBytes(FileLogWriter.java:461)

  If this is a new installation, you can try to delete/rename user_projects & reconfigure all the components again (creating new Shared services registry). Just make sure that you have enough disk space before proceeding.

  Kind regards

  Santy.

• Installation step by step 12.2 RAC ASM on Oracle Enterprise Linux5 64-bit EBS

  Hi all

  Hope you are all very well...

  Could you please help me because I am looking for a document (installation step by step 12.2 RAC ASM on Oracle Enterprise Linux5 64-bit EBS)... as I already searched and found a lot of documents, but all are more detailed, and others are for the installation of single node...

  What I need is to set up 12.2 RAC ASM environment on two 2 knots... So, could you please help me.

  Your support will be much appreciated...

  Kind regards

  Mohammed

  Hi Mohammed,.

  1. Yes, you could. You can also see "Section 3: install the software from the Oracle 11 g 2 Cluster" (Doc ID 1453213.1)

  2 oracle eBusiness Suite Installation and upgrade to version 12 (12.2) Notes for Linux x 86-64 (Doc ID 1330701.1)

  For the installation of CRS, please visit http://www.oracle.com/pls/db112/portal.portal_db?selected=16&frame=#oracle_clusterware

  Thank you

  Hussein

• Configuration of SSL in Oracle Apps 11.5.10.2

  Hello
  
  I'm trying to configure SSL in oracle apps 11.5.10.2.
  I'm a bit confused with the note ID: 123718.1. Could you please explain on the underside of things?
  
  1 SSL can be implemented at three levels,
  (a) oracle/Apache Web server level
  (b) level of oracle server form
  (c) level of oracle database
  
  Can implement SSL on one or two levels of component? As per Note: 123718.1, we HAVE to configure SSL for the Oracle's HTTP server and Oracle Forms level and these cannot be configured independently.
  
  2. According to the Note ID: 123718.1, Option 2.1. Provision of certificate for Oracle HTTP Server
  Point b to point 2 says to run "$OPENSSL_TOP/bin/openssl sha1 or * > $HOME/.rnd.
  But who will be the OPENSSL_TOP?
  
  Please advise on these above two queries.
  
  Thanks in advance
  
  Kind regards
  Sravan

  Can implement SSL on any one or all levels of two components? According to the Note: 123718.1, we HAVE to configure SSL for the Oracle's HTTP server and Oracle Forms level and these cannot be configured independently.

  You need to do to both layer of Web/Forms.

  2. According to the Note ID: 123718.1, Option 2.1. Provision of certificate for Oracle HTTP Server
  Point b to point 2 says to run "$OPENSSL_TOP/bin/openssl sha1 or * > $HOME/.rnd.
  But who will be the OPENSSL_TOP?

  $IAS_ORACLE_HOME/Apache/open_ssl/bin/openssl

  Thank you
  Hussein

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• install oracle database before installing oracleAS?

  Hello world
  
  I try to install oracle application server on my computer.
  Through the installation steps, I find that Repository metadata OracleAS will be created automatically in a database.
  Installing OracleAS comes with the Oracle database? or do I have to install Oracle database before I install OracleAS Infrastructure components?
  Please point me in the right direction.
  
  Thank you
  -bifacts
  
  Published by: bifacts on January 27, 2011 16:47

  Hello
  It depends on the version of the OAS used. OAS 10 g R2 install Oracle DB (M.) by default, but this step is not required, you can possibly create Repository metadata with OPNRRM and bind your intermediary no later than.

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is this a good practice if oracle home is installed under / opt directory?

  Is this a good practice if oracle home is installed under / opt directory?
  Appreciate any suggestions.
  
  S.

  PL post OS and database versions. You can install in any directory you choose - recommendations are documented - http://docs.oracle.com/cd/E11882_01/install.112/e24321/appendix_ofa.htm

  HTH
  Srini

• Beans of JAVA and JAVA regarding services to be customer Oracle must be installed?

  Can you please advice using an application server that make the JAVA and JAVA beans related services to be customer Oracle must be installed? For example if the generation based on Java and JBOSS to be used as an application server, yet you claim customer oracle must be installed and set up the tnsnames in order to connect to the database server?

  NATHALIE wrote:
  Can you please advice using an application server that make the JAVA and JAVA beans related services to be customer Oracle must be installed? For example if the generation based on Java and JBOSS to be used as an application server, yet you claim customer oracle must be installed and set up the tnsnames in order to connect to the database server?

  Client Oracle is not required when JDBC is used to connect to the remote DB

• How to check what oracle patches are installed

  Hello
  
  I need to now what oracle patches are installed on different databases, how can achieve this?
  
  Kind regards.

  Yep:

  Select COMMENTS, VERSION, ACTION, sys.registry ACTION_TIME $history.

  ACTION_TIME ACTION VERSION COMMENTS
  --------------------------------------------------------------------------- ------------------------------ ------------------------------ ------------------------
  07.06.05.665358 25 January 09 PM UPGRADE improved 10.2.0.1.0 10.2.0.4.0
  20 May 09 12.23.00.924500 AM APPLY 10.2.0.4 CPUJan2009
  View recompilation may 20 09 12.32.48.709814 AM CPU

  Kind regards.

  Published by: user6046340 on June 25, 2009 15:57

• Autonomous OHS Oracle can be installed in an existing 8.1.3 - version 9.0.1

  Salvation of DBA
  
  I do Upgradation to 10.2.0.4 9.2.0.4 database.
  Applicatio 11.5.10.2, O.S. Linux 4.0ES.
  
  I installed the 10.2.0.1 database successfully, after you install 10.2.0.1 database, I installed the accompanying CD, he received the following error.
  
  «' autonomous OHS oracle can be installed in an existing 8.1.3 - 9.0.1 Oracle RDBMS Home «»
  
  Please give me the farword path.
  
  Thank you
  SG

  SG,

  As the issue of the oracle user "echo $ORACLE_HOME"--> that it returns?

  Make sure that ORACLE_HOME is set to 10g ORACLE_HOME as follows:

  -Login as user oracle
  -Issue ' export ORACLE_HOME =<10g oracle_home="">"- or the source of the file under the 10g ORACLE_HOME env".
  -Change to the companion directory
  -Run the installer, and then select "Oracle Database 10 g products»--deuxieme option if I remember correctly

  Kind regards
  Hussein

• Configure Enterprise Manager in Oracle Database 11g

  Dear all,

  I want to configure my Enterprise Manager Console for Oracle Database 11g. During installation I unchecked "configure EM Console."

  I have Oracle Red Hat Linux 6.5, please guide me how can I start my console em on the Linux environment.

  Kind regards

  Atif Zafar

  Hello

  If you want to create or configure Enterprise Manager console, follow these steps:

  • Set ORACLE_HOME environment variable
  • Set ORACLE_SID
  • ORACLE_HOSTNAME environment variable set. Use the same value returned by the command "hostname".
  • Run the emca (Enterprise Manager Configuration Assistant).

  $ emca - create config dbcontrol db-rest

  • Follow the instructions.

  Kind regards.