Stored value put in service different from the value showing in Win Ops. sys.

Similar Questions

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Error 1079: "the account specified for this service is different from the account specified for other services in the Sun in the same process.

  Hello Sir

  customers start the dhcp service, I get an account of 1079 ACE ' the error specified for this service is different from the account specified for other services in the Sun in the same process.

  
  

  Go to start / all programs / accessories / Run.  Type netsh winsock reset catalog , and enter.  You may need to restart.  See if that fixes the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Error 1079: the account specified for the service is different from the specifiedfor account other services running in the same process" when I try to start it manually to the top of some program services.

  Original title: How can I restore my services to the default state.

  Here is the error message when I try to start it manually to the top of some service programs.

  "Windows cannot start the Diagnostic Policy on Local computer service."

  "Error 1079: the account specified for the service is different from the specified account.

  for other services running in the same process. »

  Hi raospent,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what services you try to start?

  You can follow this link & check if it helps.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  Hope the helps of information.
  Please post back and we do know.

• Cannot start the services of ICF error 1079: the account specified for this service is different from the account specified for other services running in the same process

  Original title: I'm trying to start the Windows Firewall.

  I'm trying to start Windows Firewall services, (administrative control / tools/services/windowsfirewall Panel) and error 1079: the account specified for this service is different from the account specified for other services running in the same process, rises.  What should I do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Logged in as an administrator on the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if the problem persists:

  http://support.Microsoft.com/kb/2478117

  Method 2:

  If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted, system files proceed to the following link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, set the center of security and its dependencies services to run under the Local Service account. Follow these steps:

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log.

  c. Select "this account", click on the Browse button, type Local Service and click ok.

  Type the password and confirm the password and click ok.

• Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database. can you please explain, where the value in frontend comes? It differs from the flow_status_code in oe_or

  Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database.

  Where the value in the frontend is filling?

  It differs from the flow_status_code in oe_order_lines_all?

  Thanks for the correction.

  He slipped right out of my mind!

  Here is a detailed explanation of this case:

  Status of orders picked and picked partial

  Kind regards

  Bashar

• Highlight cell when the value is different from the value of the cell in the next row.

  I have a requirement for a table (af:table, not a DB table), in cases where a cell value differs from the value in the row slot, the cell must be highlighted to indicate.
  
  the entire line can not be highlighted, only the cells with differences. For example, if the table contains data:
  

  90111    $1000    Widget
  90111    $1000    Cart

  The cell containing the value 'Widget' in the first row must be highlighted, other cells get no highlighting.
  
  The data comes from a DB, through VO table based on an OA.
  
  Is it possible to do this in the ADF (11g)?
  
  Thank you-
  -george

  There is no declarative way to do what the rows of the table are marked. This means that there is no way to access a value as a (+ 1) .attributename
  Here's a few codes. Check http://lucbors.blogspot.de/2012/02/adf-11g-fancy-master-detail-or-how-to.html and http://lucbors.blogspot.de/2012/02/adf-11g-even-fancier-multi-master-multi.html that might help you to implement your case.

  Timo

• Buffer the output AO, refresh rate is different from the sample clock frequency

  Hello

  I am an AO output in the buffer using a single channel. I have a stamp with a ripple of 200000 points with a triangular waves of a 1000pts each repeated 200 times. If I want a frequency of 1 Hz, I simply update this waveform 1000pts and if I wanted to 5 Hz, then 5000pts and so on. But there is some frequency that I won't be able to use like the refresh rate (the number of samples that I ask to update) is different from the sample clock frequency, which makes synchronization with the other difficult to trigger (incomplete cycle).  Frequency 3 Hz (update 3000pts), as (update 7000pts) 7, 6 Hz (update 6000pts), 9 (update 9000pts)... 11Hz at 15 Hz and is not valid in the sense that the refresh rate is different from the sample clock frequency. That makes a whole lot of inaccessible CONFIGURED!  Can someone tell me what determines the banned frequency?  Is this something to do with the material?

  concerning

  One thing you can try is to change the number of samples per cycle. This cannot give the precise frequency accurately, but can reduce the average error.

  120 Hz, the error is currently about 400 parts per million (ppm). The accuracy of the time base is 50 ppm, then this error is less than 10 times the inherent error due to the time base.

  Consider this configuration: the closest nominal sampling you rate, you can get is 120048 Hz (1000 samples per cycle at 120 Hz). If your buffer contains 1200 samples per cycle, 100 copies of it would produce 1 second of data to 120,048 Hz. But if the buffer contained an average of 1200,48 useful Samper by cycle, you get the exact frequency.  Of course getting 0.48 of a sample is delicate. But the kind of feasible. If you use 48 cycles in the 1201 samples per cycle and the cycles of 52 to 1,200 samples per cycle, the total number of samples per second = 120048. Average frequency will be exactly what you want. Instantly, the frequency is slightly higher or lower than the exact value.  By an alternation of 1200, 1201, 1200, 1201... 1201, 1200 100 cycles that the Jig is fast.  If you group all 1200s whole and all 1201 s frequency hopping may be more sensitive.  If this kind of jitter is acceptable depends strongly on what you do with the release.

  This technique is used in some systems of frequency synthesizer.

  Lynn

• Then the specified mail server host name differs from the certificate CN

  My BIEE installation is 11.1.1.7 and SMTP server configured in EM. I put the root CA for SSL certificate file.

  He calls the error message "then hostname specified mail server differs from the certificate CN", when agent is running.

  The SMTP certificate common name is "pop.mydomain.com", and the hostname of the SMTP protocol is "SMTP.mondomaine.com". If the names are different, it works fine with Outlook and other email clients.

  All the solutions to fix it?

  You are right. For the security certificate should be identical to the host. But the smtp server is not placed under the responsibility of us. I modified the file hosts as a workaround. I can't find any biee configuration option to ignore the incompatibility.

• Necessary to define the database time zone differs from the OS

  We have a database of who currently resides in New York. Let's move to another server that resides in London. This is a problem, because each date which is currently in the time base is New York time, but after the move, all the new data that created time will always be time to London. We do not want users to have to remind any date preceding the date of move, will idle 5 hours if we would like to do is to have the database always on time in New York despite the BONE being London time. The server will be shared with other applications for the operating system time zone will have to remain with London time. The database will only have data for our application. So is there a setting of database that we can use to set the time zone database is different from the operating system time zone? The database is currently 10 GB but is promoted as part of the move to 11 g.

  What is the data type of the column? If the date or timestamp, then there is no time zone stored with the data. If timestamp with time zone, then the time zone of the data remains the same regardless of the time zone database and operating systems.

  SQL> select dbtimezone from dual;                    
  
  DBTIME
  ------
  -05:00                                               
  
  SQL> alter database set time_zone='EST';             
  
  Database altered.
  

• How is the content repository differs from the ability to plugin ECM

  How is the content repository differs from the plugin ability suh as Documentum ECM. What are the different use cases. What is the best to use for document management downloads per user for association with personal products/services of the user?

  Content Repository is one based on the standards, all featured reference, included in all editions of the Adobe Digital Enterprise Platform and Solutions. You can use it to store and access content, run the complete set of content as search services, authorization, etc. Therefore, it is ideal for all needs related to document/content/assets of your applications. It offers the JCR API, as well as access via RESTful interface and player network WebDAV (among others). In addition, the content repository content management makes immediately available for all solutions that work platform.

  In essence, repository content is your go - to place to store and manage content in the platform/Digital Business Solutions. It is well suited to meet your use case.

  The Plugins of ECM (connectors) are used if you have existing LiveCycle document services, and you have a ECM systems in your infrastructure used in the form of archive. It then lets you connect to such a system of 3rd - party and recover the document for the treatment, as well as store them back for archiving.

• the result is different from the version textLayout.swc.

  Hello

  I wrote simple code using TLF.
  It generated three text box with different textAlign.
  But the result of that code is different from the version textLayout.swc.

  Why is the result different?

  I tried textLayout.swc comes with...
  [A] flex 4 SDK_4.0.0.7219
  [B] flex 4 SDK_4.0.0.9437

  OS: WinXP SP2
  SDK: worm 3.4
  Tool: Flex Builder 3

  <?xml version="1.0" encoding="utf-8"?>
  <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
        creationComplete="init()">
       <mx:Script>
            <![CDATA[
                 import flashx.textLayout.formats.TextLayoutFormat;
                 import flashx.textLayout.container.ContainerController;
                 import flashx.textLayout.elements.SpanElement;
                 import flashx.textLayout.elements.ParagraphElement;
                 import flashx.textLayout.elements.TextFlow;
                 import flashx.textLayout.elements.Configuration;
                 
                 private function init():void
                 {
                      var textBox1:Sprite = createTextBox("left");
                      textBox1.x = 300;
                      textBox1.y = 100;
                      this.rawChildren.addChild(textBox1);
                      
                      var textBox2:Sprite = createTextBox("center");
                      textBox2.x = 300;
                      textBox2.y = 250;
                      this.rawChildren.addChild(textBox2);
                      
                      var textBox3:Sprite = createTextBox("right");
                      textBox3.x = 300;
                      textBox3.y = 400;
                      this.rawChildren.addChild(textBox3);
                 }
                 
                 private function createTextBox(value:String):Sprite
                 {
                      var rect:Rectangle = new Rectangle(0,0,300,100);
                      
                      var sprite:Sprite = new Sprite();
                       sprite.graphics.lineStyle (1, 0x000000, 1.0);
                      sprite.graphics.beginFill (0xFF0000, 1.0);
                      sprite.graphics.drawRect  (rect.x, rect.y , rect.width , rect.height);
                      
                      var tlFormat:TextLayoutFormat = new TextLayoutFormat();
                      tlFormat.textAlign = value;
                      tlFormat.color = 0x000000;
                      tlFormat.fontSize = 50;
                      
                      var config:Configuration = new Configuration();
                      config.textFlowInitialFormat = tlFormat;
                      
                      var textFlow:TextFlow = new TextFlow(config);
                      
                      var p:ParagraphElement = new ParagraphElement();
                      var s:SpanElement = new SpanElement();
                      s.text = value;
                      p.addChild(s);
                      textFlow.addChild(p);
                      
                      textFlow.flowComposer.addController(new ContainerController(sprite, rect.width,rect.height));
                      
                      textFlow.flowComposer.updateAllControllers();
                      
                      return sprite;
                 }
                 
            ]]>
       </mx:Script>
  </mx:Application>
  

  [A] textLayout.swc comes with SDK_4.0.0.7219	[B] textLayout.swc comes with SDK_4.0.0.9437

  Yes.  There was a regression introduced - its since been corrected.  Trace example [B] ContainerController.horizontalScrollPosition - I think you will see that it is different from zero.

  Richard

• Cross reference marker text differs from the text on the page

  The text for a cross-reference marker is different from the written text of the page. For example, I have a numbered heading written as "3.1 Cats and Dogs", but the text of cross-reference to this position marker is "55227: title 1: 2.1 pigs and horses." The cross reference looks and works great on the page, but I can't understand why the text of the marker is different, and why it cannot be updated to match the text on the page.

  I use Windows XP and FM9. Thanks in advance.

  Ron,

  The target of a cross-reference marker must have a unique string that differentiates it from any other marker of cross-reference in the file... it is how Frame numbers how when it comes so it can maintain the link and make updates. As you have probably guessed, this string is a concatenation of way random (I think) integer to format BMP target and target the text of TFP at the time of the creation of the xref. With all these settings, it is easy to achieve the goal of a single string.

  It seems appropriate to have this text update during an update of the xref, if something changes in the target. However, this would create two problems:

  -All xrefs that are not being updated at the time wherever the marker is published would be broken. For example, suppose you have xrefs folder has a target and make updates, which modifies the marker of target due to changes to the target. Any xrefs in file B (or any file for that matter) would become broken, because they are still configured to search for the previous string of marker.

  -An update of the xref always you would have to save the changes to the target file, which is an inconvenience at best. For example, if you have made an update of the book and xref target markers have been changed, you'd have to make sure that the files associated with the changes were saved later, otherwise your xrefs update would be broken later.

  So, in summary, the text of the marker is just a unique identifier that is defined during the creation of the xref and necessarily must stay the same for its useful life, unless you want to go around fixing broken xref all the time. Moral of the story... do not put swearing or slandering of boss in your topics like temporary jokes if you never create xrefs their

  Russ

• the imei/meid number on my box and the Bill is different from what it shows in the icloud settings. Should what code I provide legal officials? I lost my phone

  the imei/meid number on my box and the Bill is different from what it shows in the icloud settings. Should what code I provide legal officials? I lost my phone

  Did you buy it an Apple Store, another store or regular carrier or as a boon to someone else?

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.