straight

Similar Questions

• 7 Verizon iPhone is compatible with LTE of Verizon's Straight Talk network?

  The answer to this question may seem like it's obviously - almost tautological - Yes, but according to three on three Straight Talk representatives (who claim to be supervisors) and one on a representative of Apple, he is not necessarily the case.

  They all said there is no way of knowing without the IMEI of the phone, if it is compatible with the network of Verizon LTE/CDMA of Straight Talk.

  I told them that I do not understand how an iPhone Verizon 7 maybe couldn't work on Verizon's CDMA/LTE network, if I try to activate it with a Straight Talk Verizon-network sim card. None of these representatives could give me a clear answer. They said quite simply the only way to check is to give them the IMEI number.

  I said that I don't have the IMEI number, because I didn't buy the phone again, and my whole point on appeal is to see if I need to buy this phone, because I can't risk to buy it, only to find out that it is not compatible. In other words, I feel like I'm stuck in a Catch 22.

  Why don't I just buy and return it, if it's not compatible? Because I intend to use my line of credit $ 1000 Paypal to buy electronic gift cards to target online and use the gift cards to buy the iPhone, because I don't have $1000 cash. So if I go back to the phone, I'll be stuck with a value of $ 1,000 worth of e-gift cards not returnable (that I don't need), a $ 1,000 balance on my line of credit of Paypal and no iPhone 7 - not a situation I want to find me.

  (I would buy the phone directly with my Paypal credit line, but target didn't allow customers to pay with Paypal in-store, and I have to pay for the iPhone in store since I pre ordered for in-store pickup. I would have paid for the phone target, Best Buy, or the site of Apple, but so far, the only way to do, is to sign up with one of the four major carriers [that I don't want to do], or already have an account with one of the big four carriers [which I did not]. Meanwhile, the 'sim-free' [i.e., not tied to any carrier] iPhone 7 is not yet available at Apple, or someone else, with no word on when it will become available.)

  Between me and my girlfriend, we have a 6 s iPhone and iPhone 5 c, that run on the network of Verizon CDMA/LTE of Straight Talk, so I can't imagine that the iPhone 7 would not. However, even Apple's site is not clear on this issue, as https://support.apple.com/en-us/HT204039 shows that Straight Talk support LTE, http://www.apple.com/iphone/LTE/ shows that the Straight Talk support LTE on the iPhone 5 C / 5/6/6 s, but does not support LTE for the iPhone list 7.

  Straight Talk was told that even if the iPhone 7 does not end work with the Verizon CDMA/LTE of Straight Talk network, it should at least work with AT & T or T-Mobile network. However, AT & T and T-Mobile coverage *, where I live (as the Sprint of), so I really want to work with the Verizon network.

  Can anyone confirm that iPhone Verizon 7 will work with the network of Verizon CDMA/LTE of Straight Talk, or suggest how I can get around this tricky dilemma?

  I realized after posting the message above, it would have been better if I had written "CDMA iPhone 7" instead of "Verizon iPhone 7.

  It would have been clearer I wrote "of Straight Talk Verizon network' instead of 'network of Verizon's Straight Talk.

• iPhone 5 s straight talk activation outside the us.

  Dear friends,

  I bought the iphone 5s Walmart on Straight Talk. then he brought in Bangladesh without activating it. now, I can't activate it. of course the straight talk is not available in Bangladesh. so, what are my options? I tried to activate it without sim. I can get to the home screen, but it does not accept sim cards. factory unlock information suggest that the phone is already unlocked. so I am confused.

  someone of you have similar problems? How can I activate this phone it takes local sim cards of Bangladesh?

  Thanks in advance.

  Hello neotanveer,

  Thank you for using communities of Apple Support.

  I see that you want to use a Straight Talk phone bought in the United States, while you are in Bangladesh. The phone you bought was probably locked to the carrier, Straight Talk. You will need to contact to unlock it, if possible. See the following article: How to unlock your iPhone for use with another carrier

  Best regards.

• IPhone 4S don't ring and goes straight to voicemail

  My iPhone 4S don't ring and goes straight to voicemail. Is the Middle set.

  gkmurdick wrote:

  My iPhone 4S don't ring and goes straight to voicemail. Is the Middle set.

  settings - do not disturb - off

• Download a file should implement an option to open the file or save it - for some reason any now just downloading it straight to the download folder. Why? Problem with Firefox or something else?

  Download a file would normally bring up an option to open the file with the appropriate program or save it - for some reason any now just downloading it straight to the download folder. Why? Problem with Firefox or something else? It is very frustrating - sometimes, you want the first opened file so it can be discarded or stored in a different location.

  Find the type of file in the Firefox -> Options -> Applications Panel, open its menu drop-down and select 'ask '. To reset all the actions of download, delete the mimeTypes.rdf file in your Firefox profile folder (or rename the mimeTypes.rdf X if you want to save as a backup). The file will be regenerated with all types of files, restore the default actions.

  For more information, see application Panel - set how Firefox handles different file types and change what Firefox does when you click on or download a file .

• Call forwarding for iPhone 5 s using Straight Talk wireless

  I have an iPhone Unlocked factory 5 Straight Talk wireless.  Using the instructions of carriers or the iPhone I can't make it work.  Straight Talk support, of course, sez contact Apple support.  Does anyone have a suggestion?  Thanks in advance

  Call forwarding is strictly a feature of the carrier has therefore nothing to do with Apple.  You must get straight talk to help you sort out why it doesn't work for you on this phone with their service.

• Emails straight in the trash folder

  Emails from known senders have recently begun to everything straight in the trash without apparent reason.

  Check your rules on your email and the junk e-mail settings with your e-mail service provider.  iOS does not work on Mac mini.  Go to the Apple about this Mac menu and update yorur signature with your version of Mac OS X.

• Satellite P30 - straight line appeared on the screen

  Hello all 2

  yesterday a vertical straight line cyan (1 pixel thin) appeared at my laptop screen, the line is not constantly on the screen, but randomly disappears and appears once again, (the problem is not about the operating system or resolution settings)

  I wonder if there is a way to diagnose is the failure caused by bad monitor (screen) or possibly inverter (it's in the bottom of the screen monitor)

  There is no chance that the prob.
  Is caused on the external monitor because the graphics card everything works fine.

  Thank you

  Hello

  It's not easy to say what could be wrong.
  As you say it s not a graphics card but the TFT or the FL inverter may be defective.

  You can only find what s wrong by checking and replacement part.

  I put t see another possibility to contact a technician from laptop to laptop control.

  Good luck

• About half the time an incoming call makes my phone ring; half of the time (unpredictably), it just goes straight to voicemail. How can I fix?

  About half the time an incoming call makes my phone ring; half of the time (unpredictably), it just goes straight to voicemail. How can I fix?

  Check: Settings - do not disturb = Off?

• All calls on my iPhone 6 s go straight to voicemail.

  All calls on my iPhone 6 s go straight to your voicemail without ringing.

  Do not disturb & flight mode are disabled.

  I tried to restore, reset etc. & also tried turning LTE offshore, by selecting "Allow calls from anyone" in DND etc (but off anyway) as recommended on www, nothing makes no difference.

  Anyone know the solution?

  iPhone 6 s running OS 9.1

  If do not disturb is turned off and you receive any calls, you should contact your operator to check your account to make sure that your phone is configured correctly.

• Advancing the Straight Edge configuration in the Vision Assistant

  Hello world

  I used the function advance Straight Edge with Vision Assistant who I little understand but this is not enough for what I'm trying to achieve. I tried to find some info on the underlying theory, but the only thing I found is the help document for it, which provides details on the different variables only.

  Could you please tell me where I could find a good source of information on edge configurations right ahead?

  Thank you  

  Take a look at the NIVisionConcepts.chm you could find under ...\National Instruments\Vision\Documentation.

  

  Christian

• Left margin too big. Straight cut

  My deskjet d5500 has been added Left hand margin too large and is straight. This problem has just begun after two years of use.

  Hi Collinson,

  It seems that there is a problem with the hardware with the printer. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  HP out of warranty of the Support Options for HP select consumer printers *.

• Straight line between two polar points

  Hi all

  I created a VI that could be traced a Polar curve according to time-distance formula. The VI has present Mag and target Mag. each with its own angle (Polar form that is (r, theta)). I want to draw a straight line from the current point to the target point. I used the time-distance formula to trace the scale and used the same slope to point the angle. However, I get a curved path as shown in the attachment.

  Could someone tell me what formula can be used to draw a straight line from the current point to the target point?

  Thank you.

  1 convert two polar points in rectangular coordinates.

  2. generate the points between the two.  You can use the function of ramp or some other methods to generate points.

  3 convert points to polar coordinates and draw.  Nice straight line!

  Of course, the question is why do you want a straight line when you use the polar coordinates?  He will not directly be r or theta.

  Bruce

• LaserJet pro 200 scans by charger are not straight

  I recently bought a laserjet pro 200.  When I scan using the plate scans are perfectly straight.  No matter what I go through the document feeder, the documents appear on the screen at a slight angle.  Is there a way to align the feeder so that scans out of lines of e/s biased?

  Hi rondip,

  I understand that you have a Laserjet Pro 200 which is not pulling the paper correctly in the ADF (ADF). I'm sorry to hear that, but I'll certainly do my best to help you!

  Even if the printer is new, it is possible there is something on the rollers that inclines the way pages are drawn in the charger. I will suggest that you follow this document "Document Feeder Mispick" Message appears on the control panel and the ADF is not Pick Up paper or feeds on several Pages to help solve your problem.

  Hope this helps, have a nice day!

• I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player

  Hi I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player.

  HI Maria,

  If you are using Vista, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations.  Once done, do the same for LNK entry.  This should restore your programs and get the Internet icon to go to the internet rather than WMP.  If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.

  If this does not work and it started recently, try a system restore to a restore point BEFORE the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try an earlier point or two because the problem may have started before you noticed.

  I hope this helps.

  Good luck!

• my computer got my programs with a windows Media on it and goes straight to windows Media can not have.

  Thursday, my computer has my programs with a windows Media on it and goes straight to windows Media and cannot have. AllOf my prpgram go at it and I can't fix it. Hope you can help me.   Judy coleman

  Hello judyColeman,

  Please see the link below for more information about resetting the default file associations.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/all-programs-open-Windows-Media-Player-all-icons/22fbd395-35AC-41C8-82c1-cfeaa4fecb8d

  It will be useful.