strange behavior of color of visited links

Similar Questions

• Possibility to change the color of visited links

  Hello. Y at - it an option on the occasion of visited links a different color on the Android version? On PC, I can do this via Firefox option or modules. But I can't find this option on Android.

  Thank you
  Tom

  There a preference for the color of the link visited that you can change by using about: config, but on websites that have their own colors, it will have no effect in itself. Here are the steps:

  Part i: the hexadecimal code

  If you want to use the same color as your desktop version of Firefox, you can find here in this way:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste to visit and make a break while the list is filtered

  (3) take note of the value of the browser.visited_color preference that should be a sign # follow-up of six characters in the range of 0-9, A - F

  Part II: Change your setting on Android

  (1) open a new tab to Subject: config (type about: config the Awesomebar and hit the arrow go or tap Enter).

  You can bookmark it for easy future access.

  (2) in the search box, type visit and make a pause while Firefox filter list

  3 scroll to browser.visited_color and touch the preference, then tap next to the end of the existing value and edit a new, then type away from control to save.

  If you switch to your other tab and test on a site that is not substitute colors, you should see the change.

  Success?

• Change the color of visited links

  Firefox 35.0.01
  Intel Core i7-3770 CPU @ 3.40 GHz, 32.0 GB of RAM, NVIDIA GeForce GTX 580

  I recently did a 'refresh' (?) on Firefox and my visited links are is more changing color. I went to the Options - content - fonts & colors - colors... and the link colors option seems correct, but when I click a link it changes color to indicate that it is visited.

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

  You can also check the layout.css.visited_links_enabled pref on the topic: config page and make sure that it has the default value.
  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Hi, my places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this. Visited links are is more changing color.

  Hello
  My places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this.
  Suddenly the visited links don't change is no longer the font color, that I prepare for an exam, I need visited issues to change color, to follow up on issues that I ended. But if I delete a few days of history, then again once, most visited links change color and then it stops, it seems that something is getting full and not able to accommodate more? Why my visited links don't change color after a number of visits? I would like to make a back up of the file places.sqlite. So I tried everything to remove the profile, uninstalling reinstalling, creating a new profile, and then copy paste places.sqlite etc, but as mentioned after a few visits, visited links is no longer change color, if I delete a few days in history and then a few visits is again change color and then stop again, so what should I increase so that my quota of visited links is increased , I also tried tweaking about: config and there has been no result. Although I was not really convinced that _pages growing brower.history_max (don't remember the name, but I'm sure you get the idea) will help.
  Seems that while my visited links change color, quota is met and only if I delete the history of a few days will I get some links most visited to change color. Can someone enlighten us? As mentioned that my places.sqlite file size is 30 720 KB so I think maybe this has something to do with it? Would be very grateful if someone could help me. Thank you.

  Sorry it is not looking good.

  1. Unlike bookmarks history is not saved in Firefox.
  2. There is a possibility using Windows.
  3. Sync is not expected to back up things until the synchronization server
  4. If places.sqlite does not sort itself you may have to re-create remove it. You will lose your history, but can still access indirectly IF you have saved a copy of the appropriate
  5. Different databases to try to create new profiles
  1. History
     is rather less robust than bookmarks, you should deliberately somehow return it upward, but it's too late now
  2. Earlier versions of Windows
     This is really the last chance. Make sure you have some places.sqlite you saved. Always before and after any attempt to restore the backup. Windows must be able to provide a previous version. One of these versions may be usable as is; or can be used after a repair with housekeeping. Of course, this is not the latest version but it should help.
  3. Sync is not a server backup service.
     Sync is intended to save on another device, no backup is the fact that the second device then contains synchronized information. IIRC Sync development ceased, and the replacement when available may include a server backup option.
  4. Recreate the database of bookmarks (including history)
     Unfortunately, recess can only use saved bookmarks, there is no saved history to use. Once the database is re-created, it will continue to store the history but it loses the existing history. This time take steps to save on a regular basis.
     • The backup profile or at least the places.sqlite in this
       Backup and restore Firefox profiles information
       https://addons.Mozilla.org/en-us/Firefox/addon/FEBE/
     • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Rebuild_Places_database
  5. Use the new profiles for database testing.
  
  To simplify comparison of the results of the database different files create one or more new additional profiles. Then try to smash the places.sqlite file into the test profile with any other places.sqlite, you want to try. Allows you to directly compare the databases, without seeking to use sync and without changing the Firefox profile work unnecessarily. You can keep a reference profile of studies with the best of the profiles of any shows results of history; According to the best recreated or corrupted database is.
  • Use the Profile Manager to create and delete profiles Firefox
  • CARE, do not rename or delete profiles created once or use anything other than empty folders when they are created. Don't nest in the other profiles. (At least until you know exactly how it behaves - post back if you never consider such actions)

• visited link color

  the color of the visited link do not work in Firefox seems to be ok on other servers. can any one help thanks Jeff

  http://petsalive.NET

  Hi guys sorry to bother you I know what it is, centuries ago, I put Firefox so it would hold all the memory because when I was testing my site it would keep watching as I had made mistakes, thanks anyway, Jeff

• [MAF - AMPA] Strange behavior of the MAF with REST service

  Hi MAF Experts.

  I just noticed that there is a strange behavior in my application of the MAF. The first loading of the page, amx:page does not make its contents (of REST). However if I kill the app and relaunch the app, content appears.

  Pattern:

  1. Start of the CRG App
  2. Opening of session
  3. Dashboard (the content is rendered)
  4. Go to any other aspect (lets say a list of products)
  5. Open product list (content do not get returned)
  6. Kill the MAF application
  7. Start of the CRG App
  8. Dashboard (the content is rendered)
  9. Go to the product list
  10. List of products (content gets rendered)

  I put a few breakpoints on EntityCRUDService and RestPersistenceManager.

  So far it return the list of entities and display the correct data (from watches in debug mode)

  Last thing I noticed is the red color below. She defined the EntityList with the new value of REST (This displays a correct value).

  TaskExecutor.getInstance (.execute (isDoRemoteReadInBackground ())

  , () -> {

  Auto Sync all actions pending first, pass false for inBackground because

  We want to process actions pending before the reading distance

  getDataSynchManager (.synchronize (false));

  The list of entities < E > = executeRemoteFindAll();

  If (entities! = null)

  {

  When an error occurs (for example server is not available, the method returns the value zero)

  setEntityList (entities);

  }

  });

  Any suggestion?

  All the rest service are configured with AutoQuery = true in the persistence - mapping.xml

  See you soon,.

  Hendry

  Hendry,

  Thanks your testcase, I was able to understand the problem.

  It turns out that MAF 2.1 has problems dealing with the advanced way in which AMPA running background tasks with the help of a thread in all of features.

  We have slightly modified the implementation in AMPA to use one thread per function and now the update issue is resolved. I sent you a link to new construction.

  We will publish the new generation soon on GitHub so that others can benefit in the same solution.

  Steven Davelaar,

  Oracle Mobile A-team.

• Strange behavior of the Animation

  Hello guys.

  I'm fading in the textArea 3 and 3 labels State 'default' to 'addRecommend' and fade out the text box and labels seeOther State to addREcommend. The defautl-> addRecommend works very well. However, addRecommend-> seeOther

  show "a text box" (which is not included in State seeOther) and kill my "add to database button" (which is in a State of seeOther).

  If I delete detailText and details of my transition melted, everything will work, but I need to have my detailText and fade out too much in detail. If I do not explain my question, please copy my code and paste it into your flex. I spent 5 hours to debug it but no luck. I have really really grateful if someone could help me.

  < fx:Script >

  <! [CDATA]

  protected function add_clickHandler(event:MouseEvent):void

  {

  currentState = "addRecommend";

  / / addRecommendMove.play ();

  }

  protected function seeOther_clickHandler(event:MouseEvent):void

  {

  currentState = "seeOther."

  }

  ]]>

  < / fx:Script >

  < s: states >

  < name s: State = "default" / >

  < s: State name = "addRecommend" / >

  < s: State name = "seeOther" / >

  < / s: states >

  < s:transitions >

  < s:Transition toState = "addRecommend" >

  < s:Sequence >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Resize target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < s:Parallel >

  < s:AddAction target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < s:Transition toState = "seeOther" >

  < s:Sequence >

  < s:Parallel >

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < / s:transitions >

  < s:Label color = "#000000".

  x="10"

  y="60"

  ID = "YourName".

  fontSize = "13".

  fontFamily = 'arial '.

  text = "Your name" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "75" width = "50%" paddingLeft = "10" id = "userName" includeIn = "addRecommend" / >

  < s:Label color = "#000000".

  y="110"

  x="10"

  fontSize = "13".

  fontFamily = 'arial '.

  ID = "recommendCityLabel".

  text = "Recommended City" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "125" id = "recommendCity" width = "85%" includeIn = "addRecommend" / >

  < s:Label color = "#000000" x = "10" y = "155".

  fontSize = "13".

  ID = "detailText" <!-if I add this label to my transition melted, the strange behavior->

  text = "you can add details!

  fontFamily = 'arial '.

  includeIn = "addRecommend" / >

  < s:TextArea = "180".

  x = "10".

  paddingLeft = "10".

  ID = "detail" <! - if I add this textArea for my transition melted, the strange behavior too - >

  Width = "90%" height = "160" includeIn = "addRecommend" / >

  < s:Button id = 'Add '.

  x="10"

  y="60"

  y.addRecommend = "350"

  width = "210".

  width.addRecommend = "150"

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "recommend your favorite places.

  label = "add your recommendation."

  label.addRecommend = "Add to database"

  Click = "add_clickHandler (Event)" "

  />

  < s:Button id = "seeOthers".

  y="105"

  x="10"

  y.addRecommend = "400"

  width = "220".

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "see recommendation of others.

  label = "see other recommendations.

  Click = "seeOther_clickHandler (event)" / >

  Hello

  I had a look at these, I think that the provision itself was a bit wonky, I enclose the code in a link like this forum tends to eat code that doesn't help when you're trying to look at the code.

  http://gumbo.flashhub.NET/Jerry/ source included
  You have the basics of work, but to avoid confusion in the States and the code, I suggest you try to group your objects to display relevant to the effects of transition, it is easier to control and maintain.
  On a side note use you designview in the ide to see how States will look, this tool will be of great help while you learn, ignore anyone who tells you not to use designview, it is a page layout tool and works well for these types of tasks.
  David.

• Strange behavior Navigation bar

  I am designing a web page for not-for-profit organization.
  
  Unfortunately, I'm running into some strange behavior problems with the navigation bar.
  The tabs in my run from the left navigation bar. The links to the left of the link, which is never active links are visited through the navigation bar, stop working. For the life of me I can't understand why!
  
  The pages are arranged so that each page has three html files. File of a single body, a single navigation bar with its tab file respective hilighted and a small file that simply loads the two, one above the other. The tabs in the navigation bar are related to the file then load the body and navigation (of course). Click on a tab to the right of the current tab loads everything perfectly. However, if the active tab is the tab more right, the tabs on the left no longer work correctly. They seem to recharge of the navigation bar, but the body is left behind and the URL always seems to be the right-most tab.
  
  Here is an example of my current site: current Site
  Through the four tabs at the top, you can quickly see things go wrong.
  The drop down menu allows access to the same pages that the navigation bar won't load.
  
  If you could please take a look at the site and respond with comments or suggestions as to what could go wrong or that I could do about it, I would be very grateful.
  
  Note that I already read something about strange navigation bar behavior caused by names starting with the picture number. This is not what is happening here, as are the names of my image "image 1" etc.
  
  Also note that I use dreamweaver8
  
  Thanks in advance for your help.
  
  -Paul M
  -Transitions for youth
  [email protected]

  They are all coded the same. Some have target = "_top" and it varies from one page to the next.

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

• exported jpg - strange behavior

  I have a strange behavior. When I export my raw or dng file in jpg format, the thumbnail jpg (in a standard windows Viewer) seems strange, the color is pink and washed out. However, the image full size seems well. On the back, normal jpg right out of the camera or sent to me looks good but the image full size in the standard windows even Viewer look dark and very contrasting.

  Does anyone have an idea of what's going on?

  Jim

  Jim,

  I guess that you are NOT exporting sRGB color space? The problem is that the thumbnails in LR are built in the same color as the JPG himself, and thumbnails in Windows are not color managed, but interpreted as sRGB. This leads to a representation of the colors wrong in thumbnails on any image exported from LR in one color space other than sRGB.

  I think that it will be a bug in LR and reported in the past (but I'm not 100% sure I know what the specs say about encodings of color required of a thumbnail).

  Beat

• Strange behavior - compositions being cut

  I'm trying to create After Effects compositions to be used in my projects from Premiere Pro, but strange behavior is making it quite impossible. Here's how it goes:

  1 start a new AE project, start a new publication.

  2 Add the clips/effects/etc., record.

  3. start a NEW AE project, start a NEW publication.

  4. add some clips/effects/etc., record.

  5 composition 1 now was shot dead in the composition of the time 2 and trying to open the composition 1 in AE, it redirects me to the composition 2.

  I don't understand what is happening... it's like being linked, but they are two completely different projects/compositions. It's crazy, and it's wasting a lot of my time. Any help would be appreciated.

  Let me slap my self on forehead and say 'Oh' is your workflow. You use dynamic linking in Premiere Pro. The correct workflow is to have all the comps in the AE project. In Premiere Pro, you go to file > Dynamic Link > after effects newcomer. You create your model in Premiere Pro, not in AE, size then AE opens and you create your model. When you want to create a new dynamic link you follow the same procedure.

  Dynamic links can only watch one instance of AE at the time so it is by looking at the last project for the info of the model. He can't find comp 1 project 1 because it is only looking to draft 3. Which explains the same design showing in all three locations. Fix the workflow and you can fix the problem. In fact, I think that if you open project 3 and import the project 1 and project 2, then 3 project, and then open Premiere Pro your problem will be solved.

• Has anyone ever met a strange behavior layer blend modes?

  I use a little photoshop for retouching and photo compositing. Tonight, I met a strange problem. I tried create a vintage photo look and had a number of adjustment layers, including a curves, levels, fill color and there was also that some layers of texture and noise all the value of the different opacities. To the top of all of this I had a layer of tile that was black on the edges and white in the Center, on the mode of multiplication of mixture. Well, when I was clicking on and turned off, I realize that this layer of the tile was certainly lighten the central part of the whole image a little (the part which is white on the layer of the tile), almost like a screen. So I hit the thumbnail by different modes of opacity layer and saw that there was no change in his behavior, each mode has screening white, darker color and multiply. I thought that perhaps he was interacting in a weird way with an other diapers so I have not disabled all the others except the back ground - still no change. Then I dropped the layer to the bottom of the after another until it was less than the background. When I started back up again, he behaved normally for a while until that I moved it to the top of some levels in the stacking order, and then he returned to the behavior of the screen. Anyway, I mixed it autour a bit but there was no thick when it would appear correct opacity and when he wouldn't, so it doesn't seem to be any specific layer interaction. I don't know, but I don't see really no case where white multiply together should produce a lighter result even if it were interacting with a different opacity. In any case it seems to me that there is something to do with the overall calculation of the opacities. I tried to create a new layer black and white and it was also do the same, strange behavior and do not correct opacity.

  I'm tired, so I'm going to bed. I'll turn off the computer and hope it goes further when I reboot, but if it isn't, doesn't that sound familiar to anyone? I'm not a regular visitor to this forum, but I thought I'd put it out there in case someone else has experienced something like this. I did that 5 gigabytes of ram on this computer and I worked there for a while... maybe that photoshop could not keep just up (?) I use Photoshop CS5, space colorimetric RGB Adobe 1998.  I never had something like this happen in the past eleven years, I've been using photoshop. Hmmm... hope I don't have to reinstall or call support or worse. I cross my fingers.

  The layer is in a group of layers have an other than to pass through blending Mode?

• Strange behavior of Dreamweaver on some code - bug?

  Hi all

  on the analysis of a website, I found a piece of code causing strange behaviors in Dreamweaver (CS4):

  I can neither type nor remove what anyone after that code (as if the keyboard is connected to the wide), but I may change before it.

  When I put the cursor in the word "InstanceParam" and press a whole line turns gray and is now unmodifiable.

  I sent this to a friend to test, but it hehas the same problem.

  Thanks in advance

  -Schurkon

  I don't know why it should be important, because the problem also occurs when you place the code in a new html document in DW.

  It is important because it tells the engine to model how to create the child page.  By "removing" you will break this link and your child page will lose function, as you discover already.

  These pages and their control model using a number of parameters to manage the content of the page-

  
  
  
  
  
  
  
  http://www.schweizerhof-ferienwohnungen.ch/sites/img/layout/back_grau2.gif"
  text="#333333" link="#333333" vlink="#333333" alink="#333333" leftmargin="0" topmargin="0"
  rightmargin="0" bottommargin="0" marginwidth="0" marginheight="0" ...
  

  Looking at your template file (which you have already downloaded it - "deutsch.dwt") I see that you use nested templates (the parent of this template file is Hauptvorlage.dwt - if you also download this file, then I'll be able to tell you that the nav setting on your page.

  Suffice it to say that these settings are a control mechanism for the operation of your pages.  Why do you want to delete?

• Can not change the color of the links

  In the properties/links Page, I changed the color of the links and a link of turning to Brown (640019). Then I changed the visited links, and active links to green (339900). But they appear in blue and purple. Here is a link to a test page.

  http://www.sneedbreedley.com/Linktest.html

  You need the pound sign preceding the color. That's what you have:

  color: 640019;
  

  It should be this:

  color: #640019;
  

• strange behavior while I work on my form.

  Hello world
  I realize strange behavior while I work on my form.
  I realize that the number of tables are becoming bigger and bigger.
  
  I did a check in sql liked and realized that there are other tables system inside... I remember for my project, I started an own database.
  
  
  
  
  can someone tell me if I have to remove them? and if so, how to remove?
  and also how can I prevent it from happening?
  
  Edited by: diskhub may 7, 2010 01:02

  Hello

  I realize strange behavior while I work on my form.
  I realize that the number of tables are becoming bigger and bigger.

  I couldn't see any problem form here. I think it has to do with the database. But seeing the picture I think you use the 10 g or version and you dropped some tables. Database is in the Recycle Bin you can delete from the Recycle Bin by using...

  PURGE RECYCLEBIN;
  

  can someone tell me if I have to remove them? and if so, how to remove?
  and also how can I prevent it from happening?

  This statement will drop the table and will not keep in the trash of db.

  DROP TABLE TABLE_NAME PURGE;
  

  But personally I would not not to use because in error table is deleted if we can use flashback to go back. But there are also some restrictions.

  If the link below also.
  http://www.Oracle.com/technology/pub/articles/10gdba/week5_10gdba.html

  -Clément