Strategy of the ISE, DACL and VLAN change together

Similar Questions

• The ISE comments and update of Broswer Security Portal

  Hi, last week our assistance service received a constant steam of calls regarding our wireless of comments.  For most people, the problem is that there are browser will not allow them on the portal.  After a bit of investigation, we have established that what happens on devices with the latest browsers - IE11, Firefox 39 + and Chrome.

  OS x and iOS devices and those devices with older browsers are working ok.

  We run ISE 1.1.3.124 which is a certain number of revisions behind so I assume it is the question that 'ignore' safety standards in these new browsers.

  My plan is to upgrade to version 1.2, and then to 1.3 which I had planned to do next month anyway, but I just wanted to see if there is a work around on the ISE, which can be implemented so that the upgrade is made a thoughtful and not rushed.

  Thank you.

  This problem is apparent on several Cisco - ISE and at least first Infrastructure products.

  A couple of threads to discuss and provide workarounds:

  Thread 1

  Thread 2

  ISE 1.3 (or 1.4) will fix it. In addition, ISE 1.2.1 Patch 7.

  Here's the official Cisco ISE Bug ID.

• My Windows 7 computer is no more can detect the wired network, but all my other wireless and wireline devices connect very well. Replace the network card and no change.

  Hello!  This morning my Windows 7 (the motherboard Acer) desktop ceased to recognize the wired connection to its network card.  In other words, it shows kind of connection, but notes "no Internet access.  It connects to a surfboard by Motorola through one Ooma hub, although I encounter the same problem when I connect to the desktop directly to the surfboard.  All other devices Wi-wired and that connect to the surfboard are functioning properly.

  Thinking that the Realtek NIC on the motherboard Asus was the problem, I installed a new Trendnet network interface card in the PCI slot.  I disabled the network card to the motherboard via the BIOS settings.  No change.  Always 'no Internet access.

  Time Warner Cable test the modem from their office and said it was working properly.  I also connected a laptop directly to the surf board using the same cable, and he was able to connect to the internet.

  Can someone help me understand what the problem is?  Thank you!

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Unable to connect to the Windows store and cannot change the account back to Microsoft Account

  Original title: question of Windows 8

  Hello world

  I almost broke my laptop trying to solve the problem of connection app win8. I have portable branch one month before, it was all alrigh except one extremely annoying thing. I could not use win 8 apps, I couldn't go to 8.1, could not use weather and etc. After that I tried almost everything I decided to cool off. Wow. Initially working store, however it asked me to upgrade upgrade windows essential stuff and so I did. And now again the same problem - unable to connect to store, can't change user of windows one...  It's just loading forever, absolutely all applications...

  (1) Changed to the local user - can't change it back.

  wsreset 2) used several times

  (3) firewall off and both Windows defender

  Future prospects for the answer.

  Hi there.)

  Problem is solved. BTW, it seems that these questions are simply copied and pasted. What a shame.

  (1) it is quite indifferent to me.

  (2) wireless, which is irrelevant as well

  (3) No, as I wrote in the first post - they are all off

  (4) failed to connect

  (5) I wrote in the first post that, after updates, was not able to do something with win8 apps

  Right, the thing was in one of the updates. I second refresh and created restore point. Updates that had to get 8.1 (which are the firewall or something like that), after all, created second restore point and downloaded the rest 80 + and here again the same story - cannot connect. This is a problem, your updates - lol. So I restored and the second point and kept without updates, finally, this updates past the list and some of them will update automatically, however I was not lost access to the victory store and now I have 8.1

  It's so funny to see how thousands of users still cannot access win store due to the error of the software engineer.

  Best wishes

  If all goes well, it will help those who are looking for a solution.

• Showing reconnect to the clone of windows 7, windows get shrunk at ~ 480 height less the taskbar height and position change window

  Is there a way to prevent this dynamic adjustment of the windows height and position.

  We use Realtime Soft UltraMon. It adds a button to title bar of litle to move windows between monitors and duplicates the taskbar and Start Menu to other monitors. Many other features.

  The readjustment of the window was of ultramon. To fix it, we created a disconnect on and reconnect to the script.

  Direct orders are not running the reason for this policy setting. While echo test > c:\temp\test.txt does not, cmd /c echo test > done c:\temp\test.txt. However, cmd /c dir > c:\temp\dir.txt does not work. And environment variables are unable to expand.

  Another approach was to activate only signed powershell scripts and import my certificate to the computer Trusted Publishers store on the statue of gold of code signing. Disconnect then the commands to run and re - connect were:

  cmd /c powershell.exe - folder c:\temp\CloseUltraMon.ps1

  and

  cmd /c powershell.exe - folder c:\temp\OpenUltraMon.ps1

  CloseUltraMon.ps1:

  get-process"ultramon" - ea SilentlyContinue | Out-file "c:\temp\ultramon.status."

  & / Stop "c:\program files\ultramon\ultramon.exe".

  OpenUltraMon.ps1:

  If (Select-String - Path c:\temp\ultramon.status-modele "ultramon") {}

  & "c:\program files\ultramon\ultramon.exe"}

• How to change the selection mask and layer image together?

  I have a newbie question.

  On Photoshop CS6

  I have a picture with a layer mask, which is related, as evidenced by the string between the image and the mask. I make a choice and try to apply a scale in free form, but I can only to scale the image or layer mask, not the two together. Don't seem much sense to me, everyone knows the answer?

  I have to set up a demo'ing youtube video my problem to make things clearer, link here: http://www.YouTube.com/watch?v=-Z6E98FZzMo

  Any help would be great

  Hello

  You only select the layer and not the layer with mask.

  Try this:

  With nothing selected, select the layer in the layer panel and then free transform.

  This should affect the layer and mask.

• How to make a table of contents to display the chapter number and chapter text together

  I'm working on 11 of FrameMaker. How can I get my Table of contents (TOC) to display the chapter number and chapter title on one line. My chapter titles have the chapter number and chapter title on two lines, two centered at the top of a new page. I wish that my OCD to pick the chapter number and chapter name on one line not two. Thank you.

  If you'v created the table of contents with activation of hyperlinks (default) setting, and then simply hold the CTRL + alt keys and click on empty entries in your TOC file. FM will open the file containing the entrry and jump to the correct section.

• My monitor does suddenly not display the colors correctly, and no changes were made to all parameters.

  Suddenly, my monitor does not work properly after any problems for 2 years. The colors are off, showing no red at all.  Red looks black and all other colors are too bright.
  I the sRGB color space profile, the pilot 5.1.2001.0 Microsoft and has no updates, and the adaptor is ATI 3D RAGE LT PRO and also has no update.  No changes were made to all parameters. I tried everything I could think of!  I play games on Facebook, but has never been wrong before.  Maybe a virus?

  Hello Jayme_02,

  Thank you for your message.  Do you by chance have a way to connect your computer to another monitor?  This will eliminate the problem with the monitor.  If the red door on another computer, then we do need troubleshoot your computer.  However, if the other monitor shows, the problem could be with your monitor.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Director of the laboratory - routing and VLAN

  Hey,.

  So we are currently setting up Lab Manager in our environment, the environment in which we are setting up is a replica of our production environment. In the LABORATORY, we use 13 VIRTUAL networks.

  I use Vyatta to route between the VLANS right now, but we are running into a problem now, 13 VLAN... 3 more that it has configurable s NIC on a virtual machine.

  Aside from trying to convince everyone that we don't need of 13 VIRTUAL networks in a lab environment, are there other possible solutions or have you guys seen or been around something like this configuration before?

  (I've been throwing around the idea of setting up two VM running Vyatta and creation of a separate network who share the two interfaces on one VLAN from the 14th and then distribute the network load between two virtual machines but it's even more work that manually configure an instance of Vyatta in LM whenever someone wants a new workspace to test.)

  What do you think guys?

  I would say that you need to trim more work for yourself in the long term.   If you want a "real" picture of your lab and prod, you can see either plan b of your presentation above and buy physical passes capable of vlan trunking. Not much, we can hope for until Vmware gets beyond the limit of 10 - nic that seems more promising with all support for 10gbe cards now.  Some department stores I've seen can pull off a true mirror of their production environment as they can in their laboratory.  With virtualization, it makes it much easier to achieve.  I hope one day, we can be their one day ;-).

  See you soon,.

  Chad King

  VCP-410. Server +.

  Twitter: http://twitter.com/cwjking

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Search for a string in the data merge, and then change the font color

  I'm working on an invitation from style postcard with the addresses overleaf. So far, I got the invitation and the mail-side with a fusion of data model to a CSV file successfully. Now, as part of my design, I want all the s of the letter 'b' on the model of mail-side (data fusion) of yellow color. The use of JavaScript is it possible? That's what I have so far, but something is wrong:

  app.findTextPrefences = NothingEnum.NOTHING as FindTextPreference;

  app.changeTextPrefences = NothingEnum.NOTHING as ChangeTextPreference;

  var myColor:Color = myDocument.colors.add ();

  myColor.model = ColorModel.PROCESS;

  myColor.space = ColorSpace.CMYK;

  myColor.colorValue = [0, 0, 100, 16];

  app.findChangeTextOptions.caseSensitive = false;

  app.findChangeTextOptions.includeFootnotes = false;

  app.findChangeTextOptions.includeHiddenLayers = false;

  app.findChangeTextOptions.includeLockedLayersForFind = false;

  app.findChangeTextOptions.includeLockedStoriesForFind = false;

  app.findChangeTextOptions.includeMasterPages = false;

  app.findChangeTextOptions.wholeWord = false;

  app.findTextPrefences.findWhat = 'b ';.

  app.changeTextPrefences.fillColor = myColor;

  app.findTextPrefences = NothingEnum.NOTHING as FindTextPreference;

  app.changeTextPrefences = NothingEnum.NOTHING as ChangeTextPreference;

  Hello

  After you set the preferences you must call the changeText() method, as

  myDoc.changeText ();

  or

  myStory.changeText ();

  But it is a static solution.

  You can use a dynamic solution to define a good characterStyle and take advantage of the nestedGrepStyle style applied to this part of your design.

  For each character 'b' could be applied with your characterStyle automatically, no need to run a script.

  Jarek

• Feature request ACR - support for the predefined folder and name change

  Please add the ability to organize the first files camera presets. He quickly gets to be too many presets in one place even with a naming structure well-thought-out. Renaming within ACR would also be a great improvement.

  Please add your suggestion to the link below.

  Feature request/Bug Report Form

  Kind regards

  Mohit

• How to run the external monitor and Portege S100 together

  I am trying to add a second monitor to my S100. But I can't get the second monitor screen and laptop to work at the same time. (Display settings never 'sees' a single monitor.)

  Other forums on this site suggests that it is something to do with the factory presets. But I can't find out how to change these on my system. Any ideas? I am running Windows Vista Home Premium.

  Hello

  Usuallyy, you can switch between display devices using the function FN + F5 key.
  Have you tested this function?

• Numbers: line specific of the worksheet a and worksheet 2

  I hope it make sense.

  I create sale spreadsheet to calculate how much I earn for sales of sheet 2 that I create a number of products that I sell. When I type "4" in the column of the products and total $800, sheet 1. I want $800 seem to leaf in two.  When I change from 4 to 8 and then the quantity changes to $1600. I must not copy the amount of sheet, a two sheet whenever I change.

  Salvation of

  Is that what you hear:

  

  Table 1:

  ALL data entry is done on this table.

  Data entered in A2, B2, and C2.

  D2 contains the formula: = B * C

  Table 2:

  A2 contains the formula: = 1::A2 Table

  B2 contains the formula: = 1::B2 Table

  C2 contains the formula: = 1::D2 Table

  In the tables below, the formulas in table 1::D2, Table 2::A2, Table 2::B2, and Table 2::C2 were filled until the end of their respective columns:

  

  The three data items in table 1 have been copied in row 3, then 4 replaced by a 8.

  Zeros result formulas in the cells of empty cells reading and calculating with the "nothing" that they find. For a cleaner looking table, add the parameters below for each of the forms before filling them down:

  Table 1::D2: = IF (OR (LEN (B) < 1, LEN (C) < 1), "", B * C)

  Table 2::A2: = IF (1::A2 = array "", "", table 1::A2)

  Table 2::B2: = IF (1::B2 = array "", "", table 1::B2)

  Table 2::C2: = IF (1::D2 = array "", "", table 1::D2)

  

  The table on sheet 2, it is probably also named table 1.

  Click any cell in the table to make it active and show the Format brush. In the table Format Inspector, click the box to display the name of the Table. Double click just to the right of the name of the table to place the insertion point, and then change the name of this table in table 2. To do this, before entering in the formulas above the tables.

  Kind regards

  Barry

• I lost the icon charge and all the legends with icons. Help.

  I installed an update of Mozy, rebooted and found that firefox had lost the legends with the icons, the icon charge completely. Customize the box covers almost the entire page and doesn't include as much as he used to. My Autofill is over. And he has no Navigation bar listed int the toolbars area.

  Have you just moved to Firefox Beta 28.0 to Firefox Beta 29,0? What you are experiencing is the new UI "Australis".

  On the first run, Firefox 29 is expected to present a tour guide you to the menu bar and toolbar changes. If that does not work, maybe there's a way to trigger again? (I have not tried myself.)

  If you prefer the familiar user interface of 28.0 Firefox, you can install the version of 'liberation' instead of the beta. A backup can be a good idea, but you don't need to remove the beta version.

  • To download the full installer: https://www.mozilla.org/firefox/all/ (scroll down to your preferred language)
  • Tips of backup: back up and restore the information contained in the profiles of Firefox

• The rest keyboard layout has changed

  I use the dvorak layout.  It is not a problem at home.  But sometimes I use the computers of others or to use another computer to work.  It would not be a problem because, in theory, you can simply activate back.

  The problem is that when I change it to the American keyboard layout, it does not change back.  I even removed it from the menu available dvorak is more selectable.  But there is still the dvorak layout.  Even the CTRL + key shift hotkey remains and it is the only real way to go once I put the dvorak layout.

  How do I * definitely * make available to the United States?  Or I have to wait indefinitely for a fix and everyone is just going to get mad at me?  This issue had on Windows since at least Windows XP and it's probably in Win8.  I use Win7.

  PS: I know how to change it already.  Control Panel > region and language > keyboards and languages > change keyboard... > General > [select United States-Dvorak] > delete but this DOES NOT WORK!

  Thank you.

  Greetings!  I too use the Dvorak layout for over 15 years now and love it.  It is now a challenge for me to use a Qwerty keyboard these days.

  Of course, the best response is that, since it is a user-specific preference, you must create your own connection to the other computers that you use occasionally.  Then simply logging in (or 'switch user') to your own username, the keyboard will change to your favorite Dvorak after the opening of your session is over and will be at the time where others connect with their own username.  It is what I use to keep mental health between me and the rest of my family at home.

  If commandeer you an existing connection and replace the Dvorak keyboard, all you need to do is add Dvorak to the list, and then select it in the "Default Input Language" section as you did.  You must keep in mind, however, that the default keyboard language is applied whenever an application is launched and will be preserved (i.e. cannot be changed except bar Ctrl-Shift or language) as long as this application or window is running.  Other applications launched from this window can inherit this trait, too.  To return to no-Dvorak, you simply change the default keyboard input language setting (no need to remove the Dvorak topic) then exit and restart any applications that are running and have been initiated with the Dvorak type keyboard as default.  It's always the way it worked for me.  If you are temporarily requisition of someone else to logon, it may be better to add the Dvorak keyboard list but keep the Qwerty keyboard as the default keyboard and then change of Dvorak with Ctrl-Shift as needed.

  HTH,

  JW