Stream FFT - does not

Similar Questions

• IP Voice Media Streaming App does not start

  I use CUCM 7.1.5 but it was also in 7.1.3.  I start all my other services except this one.  CUCM says he starts the service successfully, but it still says "Does not work."  It is the output of the service log file.  Inside it is said that he can not find the device driver.  Any thoughts on how to solve this problem?  Thank you.

  21/05/2010 07:27:31.552 VoiceStrm |   PITrace: * ERROR * [CHRISTIANE INFO]: platform install api isDeployedStandalone() = true |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * [CHRISTIANE INFO]: platform install prods api [0] = CallManager |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * [CHRISTIANE INFO]: Configuration platform of the box: 0 (CCM:0, UNIT: 1, carrots: 2, unknown: 3) |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [Cisco Tomcat]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [DBMon]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [CallManager]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [CmiManager]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [CtiManager]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [Cisco TcdSrv]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [Cisco TFTP]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [CiscoAXLWebService]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [Cisco Media Streaming App]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [CiscoEM]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [CiscoWebdialer]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [CiscoIPMA]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.553 VoiceStrm |   PITrace: * ERROR * Important info only, category [RISSystemAccess]: productid_enable_flag = 1 system_enable_flag = 1 |
  21/05/2010 07:27:31.554 VoiceStrm |   PITrace: * ERROR * [IMPORTANT INFO] AppCrashCheckBase::AppCrashCheckBase() is the RW_Process_Mutex: / dev/shm/Category_CiscoMediaStreamingApp_Mutex_crash_checker
  |
  21/05/2010 07:27:31.554 VoiceStrm |   PITrace: * ERROR * [IMPORTANT INFO] AppCrashCheckBase::AppCrashCheckBase() acquire the successful lock. : errno = 0; strerr = success |
  21/05/2010 07:27:31.554 VoiceStrm |   PITrace: * ERROR * [INFO] WriterSideCheck () open IMPORTANT existing flag_check_mmf to the left of the final run. : errno = 17; strerr = the file exists.
  21/05/2010 07:27:31.554 VoiceStrm |   PITrace: * ERROR * [IMPORTANT INFO] ExAppCrashCheck::WriterSideCheck() create/open flag_check_mmf succeeded! : errno = 17; strerr = the file exists.
  21/05/2010 07:27:31.555 VoiceStrm |   PITrace: * ERROR * {Debug information}: look on the side of the writer, writer crashed last time: true |
  21/05/2010 07:27:31.555 VoiceStrm |   PITrace: * ERROR * CPICategory::loadXmlFile() category: xmlfile [Cisco Media Streaming App]: [/ usr/local/cm/conf/MediaAppPerfmon.xml] |
  21/05/2010 07:27:31.558 VoiceStrm |   PITrace: * file ERROR * CPIClass::createMMF() MMF: [/ Category_CiscoMediaStreamingApp_PIClass_MEDIAAPP_GLOBAL_OBJECT_MDB] is started. (no error).
  21/05/2010 07:27:31.562 VoiceStrm |   PITrace: * ERROR * ExObjectUpdateTracker::ExObjectUpdateTracker::_synchronizeMAP() m_nIndex: 0 m_nRoundCount: 0 m_nTick: 0 |
  21/05/2010 07:27:31.562 VoiceStrm |   PITrace: * ERROR * [IMPORTANT INFO] name of the category: Cisco Media Streaming App file: /usr/local/cm/conf/MediaAppPerfmon.xml enbled_flag: 1 |
  21/05/2010 07:27:31.562 VoiceStrm |   PITrace: * ERROR * [IMPORTANT INFO] Add ITraceObj to the name of the category: Cisco Media Streaming App, tid:8971 l.
  21/05/2010 07:27:31.562 VoiceStrm |   PITrace: * ERROR * [IMPORTANT]: statsInit() enable_flag = 1 |
  21/05/2010 07:27:31.563 VoiceStrm |   CIpVMSMgr::Init * ERROR * failed device driver Open. |
  21/05/2010 07:27:31.564 VoiceStrm | kIPVMSDeviceDriverNotFound - Cisco IP voice streaming multimedia driver not found. App ID:Cisco IP Voice Media Streaming App Cluster ID:StandAloneCluster node ID:cucmpub |
  21/05/2010 07:27:31.564 VoiceStrm |   CIpVMSMgr::MgrThreadProc * ERROR * failed in Init, say ipvmsd to quit smoking |

  Hello

  It is built on VMware by chance? If Yes, please check this thread

  http://www.techexams.NET/forums/CCVP/46458-cucmbe-7-1-2-VMware.html

  See you soon!

  Rob

  Thank you to support CSC helps Haiti

  https://supportforums.Cisco.com/docs/doc-8895

  https://supportforums.Cisco.com/docs/doc-8727

• Windows 7 Media streaming running does not on

  When I try to transform wmplayer streaming media or the Control Panel, it is said that it is not enabled because it depends on a service failed to start

  Hi SLiu,

   
  Try to restart the service manually and check the result. To do this, try the following steps.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click on "Windows Media Player Network Sharing Service."
  c. change the startup type to automatic.
  d. click on the Start button. Click the Dependencies tab and check if there is no dependency service. If so, then restart them as well.
  e. click ok to apply the changes.
  f. try to turn on media sharing.
   
  Cross check if the settings are correct:
  See stream your media to devices and computers using Windows Media Player
  See also stream your media over the Internet using Windows Media Player
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update of Oracle streams conflict does not work

  I use three of database DB1, DB2, DB3. I use workflows to reproduce the
  Scott.Dept table for all three database. I use conflicts of update for dept
  table. The database version is 9.2.0.8
  
  Here's the code I ran for all three database.
  
  
  DECLARE
  passes DBMS_UTILITY.NAME_ARRAY.
  BEGIN
  collar (1): = "deptno";
  collar (2): = "dname";
  collar (3): = 'loc ';
  () dbms_apply_adm.set_update_conflict_handler
  object_name = > "scott.dept"
  method_name = > "crush."
  resolution_column = > 'deptno. "
  column_list = > CLO);
  end;
  /
  
  
  Here are the contents of the table in all three database.
  
  
  [email protected] > select * from the Department;
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  
  
  
  [email protected] > select * from the Department;
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  
  [email protected] >
  
  
  [email protected] > select * from the Department;
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  
  [email protected] >
  
  
  Now, I inserted a registration of DB1 and it is reproduced in all databases.
  
  
  [email protected] > insert into dept
  2 values(50,'IT','HOUSTON');
  
  1 line of creation.
  
  [email protected] > commit;
  
  Validation complete.
  
  After inserting the record, it is replicated on all the three db
  
  
  [email protected] > select * from the Department;
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  50. IT HOUSTON
  
  [email protected] >
  
  [email protected] > /.
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  50. IT HOUSTON
  
  [email protected] >
  
  [email protected] > /.
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  50. IT HOUSTON
  
  [email protected] >
  
  
  Now, I want to test the update conflict. I'm updating the same record
  in DB1, DB2, and DB3.
  
  
  
  [email protected] > update dept
  2 set dname = "db1", loc = "db1".
  3 where deptno = 50;
  
  1 line update.
  
  [email protected] > commit;
  
  Validation complete.
  
  [email protected] >
  
  
  [email protected] > update set dname dept = 'db2 ',.
  loc 2 = "db2" where deptno = 50;
  
  1 line update.
  
  [email protected] > commit;
  
  Validation complete.
  
  [email protected] >
  
  [email protected] > update
  2 dept set dname = 'db3', loc = "db3".
  3 where deptno = 50;
  
  1 line update.
  
  [email protected] > commit;
  
  Validation complete.
  
  [email protected] >
  
  
  After the above change, the output is as follows.
  
  
  [email protected] > select * from the Department;
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  50 db2 db2
  
  [email protected] >
  
  [email protected] > select * from the Department;
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  db1 50 db1
  
  [email protected] >
  
  [email protected] > select * from the Department;
  
  DEPTNO DNAME LOC
  ---------- -------------- -------------
  10 ACCOUNTS NEW YORK
  SEARCH 20 DALLAS
  30 SALES CHICAGO
  40 OPERATIONS BOSTON
  50 db2 db2
  
  [email protected] >
  
  If the deptno = 50 record is not consistent for all
  three databases. Please help me why the record (deptno = 50)
  is not compliant?

  The before and after image of columns that has been manipulated with some of the key values to identify a target line are those who must be part of a LCR. You can check this by writing a DML handler and looking at the columns in the CSF.

  Some operations require additional columns are saved unconditionally. These requirements are set out in the Documentation of Oracle Streams.

• HP 13 Stream: Windows does not not at startup

  My sister-in-law's laptop will not load at startup.  It was fine until today when she turned on laptop.  She gets no backlight at all to push the initial button.  Power light is white, showing the full battery charge.

  This isn't what I had hoped, but she left the lid down on the specifications of the day overnight and decided to open it to check on this subject today.  Computer finished loading and everything seems OK.  Must have been gremlins.  Seriously, even if I am relieved that the computer is running, I'm not happy that the reason for the glitch was not determined.  I guess we can count timidly, as "problem solved."

• HP Stream 7 does not connect at 5 GHz Wireless-N

  The stream of HP 7 supports connections to 5 GHZ Wireless-N? The included Realtek driver shows the connections of B/G/N. I'm unable to connect to a wireless 5 GHz N I have running. I tried to create the connection manually, but he sees any of this wireless network. Thank you!

  Hello

  It takes only the 2.4 GHz network supported. All you need is to allow your router to broadcast the double bands. He sees the 2.4 GHz band.

  Kind regards.

• Removal of Alternate data stream (ADS) does not update the time stamp of the file.

  I use the standard CL program stream.exe for the operation of the ads on file.

  If I add your ADS in a file, data\time file will be changed.

  F:\>dir
  23/07/2014 test.txt 32 768 18:43

  F:\>stream cr test.txt:0 important_info
  SUCCESS: tf1.txt:0 is created.

  RC = 0

  F:\>dir
  30/07/2014 tf1.txt 32 768 19:11

  If I remove ADS from file, the data\time file will be unchanged.

  F:\>dir
  30/07/2014 tf1.txt 32 768 19:11

  Tf1.txt:0 F:\>stream
  SUCCESS: tf1.txt:0 is deleted.

  RC = 0

  F:\>dir
  30/07/2014 tf1.txt 32 768 19:11

  Is this a normal behavior? I suspect a defect of stream.exe.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Streaming does not no new Player 7 and Workstation 12 player support

  Hello again.  This is not the first time that I had a problem like this (see Streaming works does not in 5.0.0 and 5.0.1 Windows drive)

  Streaming is documented in the manual, for player 12 Workstation VMware Workstation 12 Player for Windows Documentation Center

  When Player 7 came out, streaming has stopped working once again, popping up an error "file not found".  I just stood on Player 6.

  Now, I saw that the new player was released.  I installed it, eager to see if the killer feature that I learned to rely on a started working again.  This is not the case.

  Interesting excerpts from the journal:

  2015-08-25T22:33:09.479-07:00| vmplayer| I125: Command line: "C:\Program Files (x86)\VMware\VMware Player\vmplayer.exe" "http://my.host/vm_images/test/test.vmx"
  2015-08-25T22:33:12.739-07:00| vmplayer| I125: DictionaryLoad: Cannot open file "http://my.host/vm_images/test/test.vmx": The filename, directory name, or volume label syntax is incorrect.
  2015-08-25T22:33:12.739-07:00| vmplayer| W115: CnxFSVMDB::IsEncryptedConfigFile: Failed to load dictionary. Cannot open file "http://my.host/vm_images/test/test.vmx": The filename, directory name, or volume label syntax is incorrect.
  2015-08-25T22:33:12.739-07:00| vmplayer| W115: 
  2015-08-25T22:33:13.270-07:00| vmplayer| I125: VMMgr::OpenVM (cfgPath=C:\Users\myuser\mycwd\http:\my.host\vm_images\test\test.vmx)
  2015-08-25T22:33:13.270-07:00| vmplayer| I125: DictionaryLoad: Cannot open file "C:\Users\myuser\mycwd\http:\my.host\vm_images\test\test.vmx": The filename, directory name, or volume label syntax is incorrect.
  2015-08-25T22:33:13.270-07:00| vmplayer| W115: CnxFSVMDB::IsEncryptedConfigFile: Failed to load dictionary. Cannot open file "C:\Users\myuser\mycwd\http:\my.host\vm_images\test\test.vmx": The filename, directory name, or volume label syntax is incorrect.
  2015-08-25T22:33:13.270-07:00| vmplayer| W115: 
  2015-08-25T22:33:13.285-07:00| vthread-9| I125: VTHREAD initialize thread 9 "vthread-9" host id 2084
  2015-08-25T22:33:13.285-07:00| vthread-9| I125: VMHS_ManageVM failed: ret = File not found
  2015-08-25T22:33:13.285-07:00| vthread-9| I125: Cmd /host2/#_client/util/vm/cmd/##9/op/manageVM/ failed: File not found
  2015-08-25T22:33:13.285-07:00| vmplayer| I125: DlgUI: Error while opening the virtual machine: File not found.
  2015-08-25T22:33:13.301-07:00| vmplayer| I125: VMMgr: Failed to open pending VM: File not found
  2015-08-25T22:35:02.782-07:00| vmplayer| I125: WORKER: asyncOps=0 maxActiveOps=0 maxPending=0 maxCompleted=0
  2015-08-25T22:35:02.797-07:00| vmplayer| I125: Clean exit.
  

  Let me know if you need more information to track down this bug, or if there is a place better to go to report.  This forum seemed to work OK last time.  In hindsight, I should have reported the issue when Player 7 came out.  Maybe you guys need to add this as a regression test to your test suite

  Thank you

  Jeremy

  Sorry for the sudden removal of this feature Jeremy! Let's get the fixed docs. FWIW, usage statistics we collect indicate less than 10 streaming power VM on operations per month. It's a nice feature, the developer maintenance cost was not justified.

  > Suggestions as to how to replace the functionality of streaming in our workflow?

  How about try this: put the VM library on a network share. When someone wants to use a specific snapshot of the VM library on their local computer, using vmrun to create a linked clone (clone can be on a local disk). Since everyone will have write access to the library of the virtual machine, make sure to back up. I have not tried myself (I don't have the practical configuration), but I think that should work.

• While streaming a archive of the radio show, my headset does not work?

  I can listen to different media sources using headphones, but with Mozilla my headset does not work when you try to stream my favorite (kfjc.org) radio station broadcast archives. Sound continues to my crappy Laptop speakers.

  Thank you! It worked.
  Happy Holidays everyone.

• Photo stream does not

  I have always relied on the photo stream to sync my Apple and my PC devices. However, since the last updates I does not sync with my PC. Can I synchronize calendar and contacts but not the photo stream. Please help I know several people with the same problem.

  also the default folder for recording on a PC was changed from photo stream.

  Thank you Rkorte1 if you don't post that I would have. Really frustrating after issues with USS 2.2 not working and having barely that shoot as well. Harder to find corrections of recent times compared to before.

  I'm having the same problem. I tried logging and in. Turn off and turn on and restart the computer between those. Apple gives instructions on troubleshooting and a fix for this. I have a lot of photos that I rely on pc for work. I hate to pull the cable out when it usually works its been in seconds. All the info I found was 3 years before and perhaps not relevant to today.

• video streaming does not work

  I have updated and updated all components of Firefox, pluggins and apps, still NO videos from any stream source (amazon, youtube, etc.) in the firefox browser.

  they broadcast in Chrome and IE

  This can be caused by a recent Flash upgrade to Flash 11.3

  See:

  • https://support.Mozilla.org/KB/keep-Flash-up-to-date-and-troubleshoot-problems
  • https://support.Mozilla.org/KB/Flash-crashes-or-does-not-load-Firefox-13
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

• Video stream does not

  Skype has always worked well, but the other day when it crashed. I uninstalled and reinstalled but since my video stream does not work. The other person can see my video, but I do not see them, and I don't know why. I can't find anything about whether online to say why that is, if someone could help me fix this please?

  Thank you

  Looks like your graphics display driver crashes. Try to reinstall this driver:

  http://www.ASUS.com/UK/notebooks/ASUS-ZENBOOK-UX305FA/HelpDesk_Download/

  The direct link to this driver is:

  http://dlcdnet.ASUS.com/pub/ASUS/NB/DriversForWin10/VGA/VGA_Intel_Broadwell_Win10_64_VER101815424001...

• Why my photo stream to the ipad does not

  Why my photo streaming does not not on and outside

  Hi aprilluv,

  Welcome to Apple Support communities.

  Information and troubleshooting in the article tips below should help you to solve the problem by activating or deactivating my photo stream on your iPad.

  Get help using my photo stream - Apple Support

  Take care.

• What does not restart in the FFT functions way?

  Hi all

  I would like to know what that "restart average" made for the FFT functions. According to aid,"reboot on average indicates if the VI restarts the process chosen medium." If restart on average is set to TRUE, the restart of the VI the selected with an average of process. If reboot on average is set to FALSE, the VI does not restart the process chosen sprawl. The default value is FALSE. When you call this VI for the first time, the averaging process restarts automatically. A typical case when you need to reboot on average is when a major change of entry occurs in the middle of the averaging process"

  I realized that the FFT function takes in an array of values and perform the FFT on it. If the FFT function keep a buffer previous values and clears when restart average = true? Because the FFT functions are not Point by point and they take both in all the data to deal with, "a major change of entry occurs in the middle of the averaging process" can be true?

  Thank you!

  Sigh.  I really tried to explain what was going on (probably) with this function, you use (and, I thought naively, you understand), but you got me wrong.

  

  This VI creates a zero average noise signal, providing 1024 points per second.  Do you know what should be the power spectrum of the signal?  Due to the randomness of the input signal, the power (for a small finished sample) spectrum will also have a random component.  If you had several ghosts of power on average, the average would begin to converge with the expected for random noise power spectrum.

  If you run this VI and look at the Spectra resulting (on average), you will notice that the first spectrum is the most "spice" and that spectra are averaged, the variation is reduced and diminishes the value of crete (shown by looking at the scale of Amplitude).  At any time, you can press "Reset average" and see this... reset the average, the following spectrum shows the growing nose, etc.

  It shows the right way to test the function of the power spectrum and discover what he does. My suggestion as to what makes this function seems to be largely correct.

  Bob Schor

• Stream HP X 360: touchscreen does not work after updating windows on HP Stream 10 x 360

  Hello

  I have a problem with my HP Jet x 360 after doing the update of windows 10. Seems that there are no drivers for touch screen in windows 10 again, even a generic driver.

  I checked the Device Manager and found 6 Uknown devices with no driver.

  I installed the HP support Assistant, but found no driver. Windows Update No.

  Under Human Interface devices group I can't see the touch screen and in the settings app is also absent.

  I also checked the diagnostic tool in the BIOS, but the touch screen works very well.

  Please help me!

  Thanks four your help.

  You can correct the touchsreen windows version 8.1 of 'Serial IO driver without connected sleep Support Intel'. As someone discovered in this treat: http://h30434.www3.hp.com/t5/Notebook-Hardware/touch-screen-on-stream-11-x360-not-working-after-windows-10/td-p/5188892

  You can find the driver here under pilot-Graphis-Intel: http://support.hp.com/us-en/drivers/selfservice/HP-Stream-x360-Convertible-PC/7439377/model/7579371#Z7_3054ICK0KGTE30AQO5O3KA30R1

  However this does rest not correct the prolbem completely! The Touschreen works but not the accelorometer. I hope HP suport can provide some real suport at some point and release drivers that make accelometer works in windows 10.