String to the Variable of the PSP?

Similar Questions

• Unable to concatenete string to the Variable in MaxL

  Hello
  
  can you help me please to concatenate a string with a variable in MaxL
  
  MAXL statement is:
  change application variable "VariableName", "Q1" value "APPL_NAME" $CurrYear;
  
  $CurrYear is a variable in Maxl with '_2010' value, so that the result should be a varialbe substitution in ESSBASE "VariableName" with the value "Q1_2010.
  
  Is this possible?
  I use ESSBASE 11.1.2
  
  Thank you very much
  Whitebaer

  What is

  Set CurrYear = '_2010;
  Set concatVar = Q1$ CurrYear;

  change the application 'APPL_NAME' set the variable "VariableName" $concatVar;

  or

  change the application 'APPL_NAME' set the variable "VariableName" Q1$ CurrYear;

  See you soon

  John
  http://John-goodwinb.blogspot.com/

• change the string to the variable (sort of)

  Hello. I'm a flash game which requires a lot of similar, such as functions
  
  function getSomeNumber (): number {}
  return number;
  }
  
  I was wondering if I could generalize this by following these steps. take a string parameter that defines the name of the variable. Then, I want to change this string for the name of the variable so that I can the value of the output variable. kinda like that
  
  function getSomeNumber(nameOfVar:String):Number {}
  somehow use string to find variable name and returns the value of the variable
  unknown return;
  }
  
  hope it makes sense.
  
  trigger2160

  Code of clbeech is what I was looking 4. Not sure y I need all this that extra code kglad but thanks for the help anyway.

• How to convert the string to the variable of the apex

  Hello
  
  I need to replace the overall point of the table column value chain in its value of origin when the page is rendered.
  
  the process code - plsql
  -column replacestring contain the string F100_EMPID value
  declare
  REP varchar2 (100);
  Start
  Select replacestring in the rep of emp;
  Select Replace ('EmployeeID', replacestring) in the content of emp;
  HTP.p (content);
  end;
  
  The output is:
  The employee ID is: F100_EMPID.
  
  but I need the actual value of the global element when the process is rendered.
  
  Select Replace (content, "EmployeeID",: F100_EMPID) in the content of emp;
  
  This statement gives a correct output: Employee id is: 230092
  
  I need to replace the string in the column of the table in the real global element inside the plsqcode for dynamic rendering code.
  
  someone please help me solve this problem.
  
  Thank you.
  ~ Logaa

  Hello

  What happens if you use:

  Select Replace (happy, 'EmployeeID', v (replacestring)) in the content of emp;
  or maybe
  Select Replace (content, "EmployeeID", v ("| replaceString |")) in the content of emp;

  Greetings,
  Roel

  http://roelhartman.blogspot.com/
  http://www.bloggingaboutoracle.org/
  http://www.Logica.com/

  You can assign this answer to your question in marking it as useful or Correct ;-)

• Regex to replace all occurrences of an empty string, except the last

  Hello, everyone!
  
  I need get to a regular expression to replace all occurrences of an empty string except the last. Right now I'm doing this with this code:
  

  public static void main(String[] args)
  {
      String str = "abc";
      String regex = "";
      System.out.println(str.replaceAll(regex, "-").replaceFirst("-$", "")); // -a-b-c
  }

  As you can see, to do this, I have to make two calls: one for replaceAll and another for replaceFirst to get rid of the last character. So I would like to get rid of the call to replaceFirst and have the variable of regex as being a regular expression that would be to insert the character along the chain of all but the last. I'm really not very good with regexs, so I ask your help here. The thing I work, but I think it would be more elegant with just a regex to do.
  
  Thank you in advance.
  
  Marcos

  Try this:

  String data = "abc";
  System.out.println(data.replaceAll(".", "-$0"));
  

• First letter of the string to the capital

  Hello.  Try to get the first letter of a string to the capital and the rest of the chain must be lowercase.  I think I'm on the right track with the first letter, but don't know how to do any other have to be lowercase.

  Here is a little info that I might need to change things.
  I load in a flashvar drive by

  var flashVar3  = root.loaderInfo.parameters.myVar2;
  

  I don't know not what type of data, it would be, not course what flashvars comes as.  I then

  var oldStr:String = flashVar3;
  var newStr:String = oldStr.charAt(0).toUpperCase() + oldStr.substr(1);
  tf3.text=" "+ newStr;
  

  I don't know if the first line is a problem, because I do not know if the flashvars comes in form of string.  But what I usually would work on the first letter. Not sure how I can force the rest of the chain to be tiny well.

  
  Currently, I get the error

  TypeError: Error #1010: a term is undefined and has no properties.

  But I don't know if it's because my flashvars variable is set when running.  Counsel on getting that all this work would be great.

  see you soon

  And while you're trying to understand and get version of Andrei work, here the solution I was referring to which is based on the methods/array of strings and builds on what you already work with some of the ignored words... I won't claim about two approaches is best/better, just different approaches...

  var str:String = ' this IS a string to capitalize. "

  var ignoreArray = ['the', 'is', ' one ',' one ',' at '];

  var strArray = str.toLowerCase ().split("");

  for (var i: int = 0; i
  If (ignoreArray.IndexOf (strArray [i]) ==-1) {}
  strArray [i] = strArray [i] .charAt (0) .toUpperCase () + strArray [i] .substr (1);
  }
  }

  var newStr:String = strArray.join("");
  trace (newStr);

• Formatted string in the Workbench

  Hi all

  I'm on LC 8.2 and the database is SQL Server.  My requirement is: I need to send emails to a process to all members of a particular group of users.  As much as I know there is no functionality in workbench that helps me do that.  I therefore e-mail ID of the database.

  Here's my query:

  SELECT ',' + prin.email
  From edcprincipalentity AS main,.
  edcprincipalgrpctmntenti AS gr
  WHERE prin.id = gr.refchildprincipalid
  AND refparentprincipalid = (SELECT id FROM edcprincipalentity lcuser
  WHERE lcuser.principaltype = 'GROUP '.
  AND lcuser.commonname = "< GroupName >")

  And the result will be like this:

  , [email protected]

  , [email protected]

  , [email protected]

  I use 'Query for multiple lines in XML', to query the database.  Now, I need to convert it to a string of plan containing email ID inorder to use in the control of the Email.

  I use SetValue executes control to convert that.  I have a string variable in which I put the string value of the xml using serializable.

  /process_data/@EmailIds = serialize(/process_data/EmailIdsFromDB)

  It gives me the chain EmailIds = ",[email protected] [email protected] [email protected]" " " ".

  Now my problem is I can not use the result directly on my Email control because it contains a comma.  I have to remove this one somehow.

  /process_data/@EmailIds = substring (/process_data/@EmailIds, 2)

  But I do not get the desired result.

  Can someone help out me or suggest me another method to do this?

  Thank you

  Deepak

  Ok

  Let's try a different approach.

  You have your xml data in an xml variable right?

  Why not just use a setValue with an xPath expression to get the value of all the nodes.

  You can get the number using the following xPath expression: count(/process_data/xmlvar/Email/EmailId)

  Then, to set a counter variable I (integer data type) to the value of count.

  Then, wrap and increment the counter and the build you string using the XPath following

  /process_data/@strlist = concat (/process_data/@strList,/process_data/xmlvar/Email/EmailId, [process_data/@i], /mailId)

  You may need to replace process_data/@i by number (process_data/@i) for the xPath expression work correctly.

  Jasmine

• Satellite A200 (PSAEOE) with Windows XP does not recognize the PSP via USB

  Hello!

  So I have problem with my laptop Satellite A 200 (PSAEOE). After Installing Win XP on it, I could download or download all the files to the PSP (Play Station Portable). To connect to her I use USB. I check the USB connection to all other devices works on detected well in all USB, also PSP on the same works of cable with the other PC with no problems. May be I have to install the USB driver? If Yes, please show me where I could download it. Or what it might be.

  Thank you for you answer.

  Hello

  If all other devices work while your machine is OK and your PSP is also correct. But to find the drivers who supposedly work, you´re definitely wrong here in this forum, I suggest you to check these site:

  http://forums.Gametrailers.com/forumdisplay.php?f=25

  You will find that several Playstation Portable related information.

  Good luck
  Welcome them

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• How to determine the length of the string when the string using LabVIEW MoveBlock pointer dereference

  Hello!

  Calling a DLL that returns a pointer to a structure consisting of a pointer to a string, a 32-bit integer and a pointer to another string.

  I managed to MoveBlock to return a consolidation of these three things, and which works very well.

  But now I need to read the two strings I have pointers to which are not fixed length. MoveBlock has a size of entry, but how to know how long channels are?

  Try this:

  ...\vi.lib\Utility\importsl\GetValueByPointer\GetValueByPointer.XNode

  Wire just a constant string to the Type of entry.  If I remember correctly, the draw of endpoint (assuming that the C strings) will be included.

  Sometimes I have just MoveBlock a byte at a time until I get to a null value or has specified maximum size.

• difference of initial value of string between the steps in the process and an external instance of LabWindows/CVI

  Hello

  I'm curious to know what I see using TestStand, LabWindows/2013 2013 with regard to initial in TestStand string values when you perform the steps in the process or an external instance of LabWindows/CVI.

  I have a step (CVI) string value that is used to check an array of characters stored in an EEPROM to test.  I pass on the Step.Result.String in the CVI by reference.  I then read the table charater of the EEPROM in the chain (Step.Result.String).  The string is then compared against the limit as specified in the test step breast.

  When I run this test step to perform the steps in the process selected in the popup Configuration of the adapter of LabWindows/CVI, it seems that the memory allocated for the string is filled with null characters.  Which is what I expected.

  When I run this test step to execute the steps in an external instance of LabWindows/CVI iselected of the Configuration of the adapter of LabWindows/CVI popup, it seems that the memory allocated for the string is filled with something else.  That is not what I expected.  For example what I see in the memory, it's the first characher is one byte NULL but the remaining bytes are some other values, as shown below:

  F0 00 AD BA 0D F0 AD BA 0D F0 AD BA 0D AD BA 0D AD BA 0D BA 0D AD F0 F0 F0
  F0 AD BA 0D F0 AD BA 0D F0 AD BA 0D F0 AD 0D AD BA 0D AD BA 0D F0 F0 F0 BA...

  In my code I make sure to write a null character in the following location table charater I just write in the chain so I have no problem with the test is working properly.  I have remove the writing from my code null character and was able to verity that the test passes when executing the steps in the process and fails during execution of the steps in an external instance of LabWindows/CVI.

  The returned string contains what I wrote for her, and then the rest of the string is filled with the values that are in the memory allocated for the string.

  Here's my Question: is this the expected behavior for the original string values in TestStand between both types of stage performances?

  Thank you

  Chris Young

  In general teststand not Initializes the unused portion of the string buffer, so it is expected that the values of the memory after character no endpoint will be different, or even to each call. If you happen to be get zeros after the null terminator which was probably due to random character (i.e. the memory allocated just arrived already having zeros in there) or perhaps a debug setting you use perhaps in the Visual C runtime (if you are debugging the process in visual studio or modify visual C runtime heap parameter). TestStand is not initializaing memory after the null terminator character in both cases (I checked the code).

  -Doug

• string in the format spreadsheet in table: Missing comma

  Hi all

  Plug-in function "string in the format spreadsheet en table" with LabVIEW 2014. I do not understand why, but the point numbers are truncated at the output of the function.

  This is the VI as an attachment.

  Thanks for your help!

  Hello

  The decimal separator of your OS comma an EST. So either you replace it with a point or you replace the %f in your code by %; % f:.

  

• Length of the string, excluding the input character/string

  Long story short, I want to replicate the function of the length of the string , but do not include an input the number of characters in string. For example:

  The input string (search) is 'the

  My first string to test is "the big red dog."

  That would mean a 13 string length.

  My second string is "Jumps over the lazy Fox."

  That would mean a length of 21.

  ' Hello World! ' would return 12.

  'The Lion, the Witch and the wardrobe' would return 26.

  I hope that you can see what I want to achieve. How is this possible?

  -James

  (I'm driving Labview 8.5)

  Use the search and replace the string to replace your 'exclusive' with an empty string string.  Use the length of the string on the result string.  Make sure that everything is already set to TRUE.

  

• Incorporate the binary string in the string spreadsheet file

  Hello LabVIEW wizards...

  So I use scripture to VI file spreadsheet to create a beautiful layout, tabs-delimited report of one of my programs for the acquisition of data file. In one of the cells in the resulting worksheet file that I want to put a binary string of all my control values so when you open the data file all the control parameters used for its manufacture are restored, but the string is hidden when the report is displayed in Excel.

  The problem is that the binary string flattened uses tabs and returns as part of its syntax the Spreadsheet File this VI to Write it's going in all directions. Worse yet, I can't unflatten chain when I open the file text because of "corrupt data or unexpected".

  If I concatenate the string flattened with quotes around it she is superb and is placed in a single cell in Excel, but when I open the file in LabVIEW that she is still several elements in the array. I've isolated the binary string using the file VI text reading and got a subset of the quoted string, but it still unflatten correctly.

  Essentially, I need to know how to get LabVIEW to pull a string literal full of special characters into a spreadsheet file and it unflatten. Any gurus what help you can provide is greatly appreciated.

  Thank you

  Jordan

  Jordan

  I suggest that you change the formatting of your chain shipped by replacing the tabs and returns with other characters that are not considered as commands by the spreadsheet functions. Without knowing how you represent your control binary values, I can't offer specific characters.

  If two non-printable characters exist which do not appear in the control data, it's easy: just find and replace tabs and returns with those characters.  If there is no character, then something more complex needs to be done for example to escape special characters.  Or create two subVIs - one to remove the tabs and returns before writing the string in the file and the other to restore after reading.

  Lynn

• Need to convert a local 'digital' to a type value string using the browser of the expression.

  I'm trying to convert a local "numeric value" to a string via the browser of the expression to provide a string argument.  I'm currently looking through the options of expression browser, but I can't find any type of function 'ToString()' Number.

  Hi you should try this:

  Str (people of the country. MyNumeric)

  Concerning