Structure of the case duplicates all the indicators on the user interface.

Similar Questions

• How to navigate through all of the links in the links Panel in the user interface?

  Hello world

  I wonder how I can browse all the links in the links Panel, programmatically. I have a document where the resources present in this Panel are not available using the ILinkManager. He tells me there are no links in the document when using ILinkManager-> GetLinkCount().

  These resources are not more related to any element on the page. These are images which are not more related to what it is. Right-click on it and click on 'join the link' shows nothing in the document (the same operation on a resource that is linked to a graphic image focuses on it). I can manually re-edit the link, but nothing more.

  In the user interface, there is no way to delete (not menu 'remove' or whatever).

  I think I "created" them as follows: during the creation of the story, the story is tagged. Then I attach a picture frame and label it in the history. Then I remove the frame (s) containing the history, so that its history xml is "not placed" (see kXMLUnplaceCmdBoss). At this time (if I'm not mistaken), I created these inaccessible resources. I see the xml story unplaced in the structure of the document that remains not placed XML (in the backup store) and resources in the links Panel.

  History unplaced XML CAN be removed manually, but not these inaccessible resources. However, there must be a way, as InDesign can display them.

  How to reach these 'lost' resources and delete them, by programming?

  Independent of your real problem, I would first try the equivalent in the user interface.

  Preparation:

  To simplify things and make them visible, working on a traditional tale - not the backup store.

  The story should be labeled and will remain so.

  Add content as complicated as you want.

  Some content preceding and behind it must survive.

  Your content must be labeled - surrounded by a single label.

  Text-Select this unique tag (see the invisible etc for the right selection).

  Remove the text selection.

  See: Tags are gone, content text disappeared, the images have disappeared.

  Now find a way to perform this deletion text programmatically. Without specific code XML - operation but a simple text, InDesign will do the rest.

  Finally, use the code that results on the backup store.

• The best way to separate the user interface in the model LV 2012 queued Message Handler?

  If you create a new "queued Message Handler" new model 2012 LV, you will see a blue box in the case of "Update view" that says the following:

  Code Recommended - If you wish to decouple the Message Handling Loop from your user interface, consider creating User Events (like the "Stop" event in this VI) to message the Event Handling Loop whenever the user interface needs updating.
  

  I would like to give a suggestion, but I am struggling to find the best way to do this and still keep code modular.  The template creates a user - Stop.lvlib "event with a create/Destroy/fire Subvi.  I would like to create a library of "User event - Update UI.lvlib" similar with similar Create/Destroy/fire Subvi keep this new modular and separate user event.  The problem, I am struck, is that there may be only two hydrants in case Structure dynamic event so, how I modularlize creating user events in separate SubVIs and always maintain this dynamic event terminals?

  As a follow-up on the issue, it would be preferable to have a library of user by indicator events that must be updated or that a single UI update of the user and then event pass a cluster as the message that contains the name of the control for the update (to use with a structure of matter), then the data to go with it?

  Thank you!

  Instead of having the events to record in the 'create' methods, you could be part outside your 'create' SubVIs and then simply bundle them. Then, you create your individual event of the user management. See excerpt where I created a vi 'Create user event - Update' in front of the stop.

  

• Need help with this code to update the user interface example

  I'm triying to understand the differences between the three methods to manage UI interactions.
  I'm really confused with these three terms when triying them figure out in a real case.
  Basically, I know that I should use invokeLater, invokeAndWat, or getEventLock() to avoid
  This exception: java.lang.illegalStateException: engine access UI without holding the lock on the event

  The code below illustrates the function of the invokeAndWait method, but if I replace it with
  invokeLater or getEventLock() the program will work exactly the same way.
  Could you please change the code to show the differences between the three
  methods of updating the user interface?

  / public final class HelloWorldMainScreen extends form {}

  private LabelField labelField;
  public HelloWorldMainScreen() {}
  labelField = new LabelField ("Hello World");
  Add (labelField);
  Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
  thread. Start();
  }

  {} public void appendLabelText (String text)
  labelField.setText(labelField.getText()+"\n"+text);
  }

  }

  SerializableAttribute public class MainScreenUpdaterThread extends Thread {}
  HelloWorldMainScreen screen;

  public MainScreenUpdaterThread (screen HelloWorldMainScreen) {}
  this.mainScreen = screen;
  }

  public void run() {}
  for (int i = 0; i)< 10;="" i++)="">
  try {}
  Thread.Sleep (5000);
  } catch (InterruptedException ex) {};
  UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}
  public void run() {}
  mainScreen.appendLabelText ("Update");
  }
  });

  }
  }
  }

  These three concepts are very confusing for a lot from people so all explanatory source code
  describing their functions will be highly useful for everyone, I think.

  Thanks in advance!

  With respect to the effect, there is no difference between methods.  The difference is the way in which the result is achieved.  So we can't change the code to show you the difference.

  As we are unable to demonstrate the difference, you have to do with an explanation.  To understand the explanation, you'll need to understand the thread of events, so if you have not already, please consider this:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

  If the three options are differentiated by the processing order:

  (a) invokeLater executes the update on the thread of events.  The transformation takes place at a later stage and the code which is in order after the invokeLater will actually run before the code within the invokeLater.

  (b) invokeAndWait also manages the update on the thread of events, which means that all other events that await on the thread of events will be run before this code.  But any code after the invokeAndWait will not be executed.

  (c) the synchronized option, like invokeAndWait, runs the update of the UI before moving on to the following code.  The difference is that the code to run on the event Thread is not executed before code in the synchronized block.

  If this is meaningless, so that probably does not matter too much.  in general, you should use invokeLater, except if you need to update the user interface occur in the order with your background processing.  If so, use invokeAndWait. It has synced are very few occasions where you must use the block, and it should be very small updates to the user interface and you should understand the implications this could have on the wire events.

• OS6 Guides development of the user interface

  Is there a that guides all OS6 out UI development still?  I wrote some background apps start on my "BOLD" 9000 OS4.6 into development, but now I want to try my luck at the user interface.  I just got the Torch 9800 and I want to connect it to one of my web applications and retrieve/display information, update etc.  Specifically, I'm looking to connect to our own ticket, tracking system, so I can access ticket information, update tickets, view attachments (blackberry types supported in any case), the old tickets (executed on the server) search and display the results.  I have already addressed most of the back-end things (http, xml, persistence, file system, gps, connections message, discussions, etc.).

  Thank you

  Song

  http://goo.GL/t4TJ

  http://goo.GL/fECh

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• Type the size of the user interface

  It's almost the end of 2015 - y at - it a solution to the ridiculously small UI in the CS6 / CC products?  I use Illustrator and PS a lot, and the size does not work.

  I have 20/10 vision, do not wear sunglasses.  I just upgraded to dual Dell UltraSharp U2515H 25 "monitors with a native resolution of 2560 x 1440.  The user interface in CS6 products is almost unusable and I can't find any way to change that.  I see the forums full of this problem since at least 2013 and probably before.

  Adobe, fix this.  There are alternative package graphics and I'm not locked in your products.

  Ideas of pragmatic community or solutions would be welcome - don't waste all the time will tell how it works fine for you, or preaching us on how we should just use Adobe products as they are.

  This is a problem, it's true, and I'm not alone in this observation (notice I didn't say "notice").

  Thank you.

  I have everything set to CC (2015), and it seems now the user interface option is available in both I and PS

  As much by the support of the HiDPI, it will now be on the same scale scale level because the OS (Win 7 x 64 in my case) - 100, 150, 200%.

  Looks now much better and more usable.

  BTW - I hate the interface for the new DC Acrobat - I'll be restoring the Pro XI.

  Thanks for responding.

• Currency of the line has changed since the user interface has been made on creating

  Hi all
  
  I'm ' currency of the line has changed since the user interface has been made. " The key to the planned line was oracle.jbo.Key' error on create action. Use case is simple. He saw table and create a button. When I click the Create button, I get this error. Back button of the browser is never used.
  
  The strange thing is that I don't get this error when I run my application on your premises. However, after I had it deployed in real development environment, he started up this error and I do not get this error on other pages.
  
  JDeveloper Version: 11.1.2.2.0 (JSF 2.0)
  Weblogic Version development environment: 11.1.1.6
  
  Kind regards
  Anil

  Same question: do you have the correct version of the runtime ADF your server?

  Timo

• Sharing of inconsistency between the API and the user interface for catalog

  In the vCloud Director UI, you can go to the properties of a catalog and share TWO everyone in read-only AND specific users/groups to have full control of the value. The API seems to allow to BE ReadOnly value all or specific users/groups to full control. Even when I put the two in the UI, when I do a GET with the API, if IsSharedToEveryone is set to true, the individual user/group access control settings are not displayed. They are mutually exclusive?

  So who is correct? the API or the UI?

  If the user interface is correct, how can I get the same result with the API?

  What I want to achieve, is to allow full control to a specific group of users and read-only for everyone.

  The workaround is to have a group set for total control and another with everyone in the org in a different group of read-only value.

  Hello

  This is a limitation of v1.0 of the vCD REST API. It is already fixed and will be available in the next version.

  In this case, the user interface is correct.

  Kind regards

  Todor Todorov

• Interact with the user interface components

  I'm trying to find a GOOD way to interact with the external classes user interface components. For example, that you have a 'controller' class that needs to access the view of the user interface in some way (define a label text or something else). The controller class does not do anything, it discusses only the logic of what should be the case. Currently, it is created by my top-level class when the program starts. He listens to some events occur and needs to update/interact with the user interface or the State of the application depending on what events are. I do not seem to be a way for this controller class to easily access the UI component that I need to get my hands on.
  
  I'm trying to do to reduce the size of a file of mxml WindowedApplication growing (LOOK cool but that is not important) and take part of the logic of the application of this file.
  
  It's complicated by the fact that the label is in a State that does not have the status of 'base' (so it is not a child, or even a subsidiary child of the main class at boot time) and by the fact that it is not yet near a high school component. (If that were the case, I could probably just pass the label object in the constructor for the outdoor classroom.)
  
  In other words, I can't just call getChild ("labelName") on my 'main' request object because it is buried nested inside OTHER components. I don't think I like the idea to browse all components and sous-composants recursively looking for the component that my outer class trying to ask. I thought about other ideas, but I don't like any of them enough to try them, eh.
  
  I'm at the point now about where I come to the conclusion that my fundamental design strategy is wrong, or Flex just not allowing complex applications where the GUI components can interact with external classes relatively pain-free. I'm not convinced that "Flex cannot do', I'm looking for advice on some great Flex application in all design patterns.
  
  Where do you put this kind of control logic, and what happens when it starts to overflow and become so large that you need to break in other files?

  Found a solution, I think that's what I've been looking for:

  http://labs.Adobe.com/wiki/index.php/Cairngorm

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• How to get TS::SequenceContextPtr to customize the user interface

  I want the file of the custom, user interface sequence value therefore need to take stock of the TS:equenceContextPtr, anyone know how to get this point.

  Is there a reason that UIMessages are not enough?

  Just off the top of my head, here are a few concerns with the not not using UIMessages:

  1. How the user interface is unknown when the file of the sequence is developed to set the value.  Without an event or some sort of synchronization you can do exactly that.  UIMessages not only to ensure the right information, but they help also with synchronization.
  
  
  2. The engine does not know this information, and view of execution manager knows that the information for the current execution it is linked to (which changes throughout the life of a series of tests).  Basically, recall of front end, model, and other factors may spawn short executions briefly related to the Manager view of execution.  So if you take the context of the sequence of the current run is perhaps not the right one.
  
  
  3. Writing a user interface will be couple the user interface to your specific sequence file.  At this point, you can use the network variables or global variables or global queues as well.  It might even be better options.

  The situation you describe is exactly why the UIMessages were created.  Maybe you can help me understand why you are set on the use of pointers, you already have?  There might be a better solution for your case if I'm misunderstanding you.

  Thank you

• How to get an array of integers to user in the User Interface

  Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

  I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

  General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

  What is the best way to get an array of integers through the user interface?

  The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

  More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);

• Error variables look a tab after race change the user interface

  Hello

  I have a problem which seems to be a bit like this:

  http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

  The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

  The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

  This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

  Thank you

  -Josh

  Josh-

  Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

  I hope this helps and I'm sorry for any inconvenience this issue may cause you.

• Impressive transformation slow due to the updating of the user interface

  Hello

  I feel a huge slow down in my test as engine

  I update the display after each test. It consists of a rather

  "simple table" with a subtle change of color and bold

  to indicate the failure or success of the test:

  

  I have also tried several things to determine what routine was

  make the program almost crawling like a snail, here's my

  results:

  No UI refresh: 0m48s (same as Teststand with no updates of the user interface)

  The discount but no page table switch: 1m06s

  Bay of refreshment and switch page: 1m26s

  There are 314 tests, up to 314 redraw and possibly

  switch page 314 to reposition the view. Which gives the

  following user interface refresh costs:

  

  Update of the table: 18 years/314 = 57ms (replacing just a single line, Center to top)

  Switch to page: 20 s/314 = 64ms (bottom right corner)

  Is this really the case? Is there a way to make the refresh of the user interface

  faster? Create two separate loops/threads, one to make

  the test, one for updating the UI asynchronously?

  I understood for an overall picture about different

  widgets, but here I'm 'just' display of channels...

  David Koch

  Well, multi-listbox control is a problem if your change causes access to the muliple property node. For each property node LabVIEW normally does a refresh of the user interface which is very quickly. Fortunately, there is a fairly easy way to fix this.

  Use a node of property for the current VI (just drop a property node and change its class type VI Server-> VI reference) to get the reference of the Panel. Then use another property node connected to your reference of the Panel and select update from the Panel to postpone. Set this value to true before your Listbox (and any other updated user interface) and set the value to false then.