Subsidies for the tools-> monitor Sessions.

Similar Questions

• How to install a local help for the tools of cmd.exe and command line on Windows 7?

  Hello

  for many applications, the command line (cmd.exe) is a good choice to get results with minimum effort. The shell has continuously been improved over the years, at least until Windows XP.

  All the command line tools have a short help screen (using the /? option). When you need more information, you use Windows system for example from the Explorer Help. It is very good.

  Now, Windows XP Help content was installed on site, and the operating system. In Windows 7, my computer wants to go to the Microsoft web site on the internet and there is no local help available. The operating system seems to be incomplete. This makes the help system unusable on a computer without internet access or when the server is not accessible.

  So my question is: is it possible to install a local copy of help for the tools of cmd.exe and command line under Windows 7 or do we have to go back to Windows XP?

  Thank you

  Martin

  Download it directly from Microsoft - Windows Command Reference

• The version IE CS6 he supported for the tool defined Middle East? -left to right in tapping etc.

  The version IE CS6 he supported for the tool defined Middle East? -left to right in tapping etc.

  I guess than IE Middle English International, as opposed to the English in America (aka American English). There is a Middle Eastern and Hebrew support via a user interface in English for programs that support it such as InDesign.

  You can change the installation language by launching the Adobe Application Manager and clicking on your name at the top left to bring up a context menu. In the menu, select Preferences and then click on the drop down menu to languages. See the screen capture below:

  

• script for the murder of session

  Hello
  I prepare a script for the murder of session and I use the following command to generate the script for large number of users. The syntax for the murder of the session is ALTER SYSTEM KILL SESSION * "SID, SERIAL #" * IMMEDIATE. I want my output with SID, SERIAL # values within the single quots *('SID,SERIAL#') *. can someone help me on this?
  
  
  Select "ALTER SYSTEM KILL SESSION ' |" SID | «, » || SERIES # | ' IMMEDIATE '. « ; » FROM V$ SESSION WHERE BLOCKING_SESSION IS NOT NULL
  
  
  
  
  Thanks in advance
  
  Published by: 793097 on December 14, 2010 05:53

  select 'ALTER SYSTEM KILL SESSION '''||SID||','||SERIAL#||''' IMMEDIATE'||';' FROM V$SESSION WHERE BLOCKING_SESSION IS NOT NULL
  

  Nicolas.

• Issue the odd monitor Sessions

  With the help of 3.0.04 Developer SQL Server Oracle 10 g connection.
  
  I can't see all user sessions when I use the sessions monitor option in the Tools menu. I see my sessions, but not other users.
  
  The strange thing is that if I use the Sessions by username report (under the heading data dictionary reports > Database Administration > Sessions) I get a list of user sessions that I am unable to see using the report of 'Sessions' at the same place.
  
  The user I log in SQL Developer's SYS. If I log in Enterprise Manager, with the same user credentials, I can see all sessions.
  
  The weird bit is it didn't used to be like that, and I never am not aware of all the changes have been made that there would be. I have been using the Sessions of the monitor with success for at least 9 months and it was only behave like that in the last 3 weeks. I guess that everything that happens is just a select < something > session $ v? What do you think is the cause?
  
  Thank you
  
  Casper

  This is the 2nd.

  Here's the question you need to ask - why would one of your end users to access the database via the "SYSTEM" very restricted and privileged account?

  http://docs.Oracle.com/CD/E11882_01/server.112/e10897/users_secure.htm#ADMQS12003

  Adding filtering to this screen and this report features are a good idea to explore in the riding of SQL Developer
  https://Apex.Oracle.com/pls/Apex/f?p=43135:1

• Recommendations for the second monitor (27 in.)

  Hi - We are through to PC iMac27 some of our offices.  Currently, most of our Dell ups have double monitors because we usually inventory or manufacturing software open on one monitor and email on another.  Or their variants.

  I noticed he had discussions in the past, but nothing too recent, and I guess that this kind of things always evolving.  Google searches to discuss some, but:

  can anyone suggest a decent price monitor (under $ 400) that I can match up with the iMac 27 "?

  I am particularly looking for those who have white or brushed aluminium chassis - or at least a 'mac' look like.

  Mac Thunderbolt screens seem great, but $ 1,000 each, they are off-budget.

  Thanks for the suggestions!

  Jaco_Crash wrote:

  .....

  Mac Thunderbolt screens seem great, but $ 1,000 each, they are off-budget.

  .....

  They are also be abandoned once the current stock is depleted.

  Much will depend on the resolution and the size of the screen, but there is none

  specific "Mac-like" monitors.  The best is to check which providers

  propose and see what is acceptable to you.

• Satellite A100-02 b PSAAR: trick to be able to save for the multi monitor users

  Hi, people

  I always use an external as extension of office monitor when I connect my Tosh to AC.
  And I just found out, when I plug it all and go truly mobile, the graphics card still provides a signal to the VGA Port for the then nonexistent extern monitor.

  On my Satellite A100-02 b (PSAAR) that consumes about 2 Watts, which means about 10% of the duration of battery life, which is about 20 minutes!
  So, if everyone did the same thing
  -Place a link on your desktop or startmenu to 'C:\Windows\System32\control.exe desk.cpl"to have quick access to the settings of the monitor
  -turn off the monitor 2
  - and enjoy longer battery life!

  It's on my Vista, I don't know how XP performs...
  Welcome, Matz

  Hello

  Thanks for the very useful info.
  I think it could be very useful for everyone who uses batteries very often.

  Good bye

• files to open with the icon "sets of source for the tool shape history".

  .. can someone shed some light on this? I tried to change the tools - he remains. I'm new to Photoshop, so maybe I knocked something unknowing - but I used it for the past two months without this icon. don't know what this means or what to do with it.

  There are several painting tools. A Brush tool icon is hidden under the current tool or the last brusg için used.  If you right-click on the icon of the Brush tool in the tool palette the hidden Froosh tioo icins will pop up if you have not customized 2015 CC tool palette. You can use Shift + ShortcutKey alsi to scroll through the icons hiddek.

  

• Modify click &amp; timeout for the tools in the toolbar

  Hello fellow Photoshop-ERS!

  My question is hidden in what concerns the click & hold the delay of selection tool in the toolbar. Since the last update of Photoshop CC 2015 (version: 2015.0.1, Build: 20150722.r 168 x 64) the delay time after I click & hold is significantly more time to display the option of the tool in the toolbar (for example, click on & keep on the move tool to access the work plan tool). Is it possible to shorten this period in preferences somehow? I went through each of the menus in the preferences and didn't see an option for this. Any help, as always, be appreciate! Thank you!

  If you want them to appear earlier, use a right-click instead to wait or try a left click. When you right click, they should appear.

• secondary control as a mask for the tool curves

  I am trying to use the Curves tool on any other that heaven... is possible to do it by linking to a secondary control somehow?

  Hmmm... When I went the last decade using Lightroom in the video from 30 years in the stills, and Yes, a LOT of work in the curves... like a lot of old stills shooters I wanted CURVES. I know there are a lot of video of people who love them too much. But after reading the book "Color Correction for video" Hullfish & Fowler and 'see' how they used the various tools in the different programs of ranking... and really learn how to use the color wheels & sliders... and a few vids lynda-dot-com on SpeedGrade... even after putting curves in Sg, I've only used them on rare occasions. For this... I would not use them at all.

  Go to the basic color correction area... you have three wheels, Offset, Gamma, & Gain, each with a slider on the left for the corrections of "luminance". In the "package" tab of the offset control is pretty much an up-or-down for any tool. Gamma is in the middle and it grows one way, by compressing the data on one side of the move by stretching on the other. The gain is a contrast of Monster control... space-saving, high go fast, mids some values not low at all. And of course you can use cursors for these too... the option are the wheels, sliders, digital input.

  Shift tab shadows... you have now three orders for shade, roughly the lower third of the picture... lift & fall total values, move the middle section facing upwards or downwards or extend the top of them a bit. There is a control "pivot" to define where the intermediate point will occur or 'pivot' for these changes. Midtones... even in the midrange. Also highlights. So, essentially, you have nine controls up & down the dynamic range.

  For your problem, I would go to tab shadows and using cursors of luma (while watching extended... always have the four outside!) I set the slider of luma shadow offset so the lowest values simply hit the bottom litters... and try the two luma middle and upper lift controls in this section of the shadow. Would not touch that the weakest sky of all... the values are in the midrange region. That I brought upward values below, I would probably adjust using the color wheels for the hue/color control.

  Neil

• documentation for the tools of 8.53

  Hello
  Search the documentation for installing the tools 8.53 (MS SQL server).
  
  Thank you.

  Everything you dream free installation:
  http://docs.Oracle.com/CD/E38921_01/PSFT/HTML/docset.html

  Nicolas.

• CS5, no Audio output of the Source monitor, but output OK for the program monitor

  Hi all

  Any thoughts on why audio output would be audible during playback in a timeline/program monitor, but the same clip doesn't produce audio output when loading in the source monitor? In the body of CS5.

  I checked the preference settings and everything seems to be fine there.  We have just added a set of external speakers to this workstation and those are the audio devices in the program monitor.  When a clip is read in the Source monitor, speakers produce a nice low hum, but the sound of the clip is missing.  The buzz that crosses leads me to believe the audio hardware is mapped and set correctly, but maybe not?

  Thanks for your thoughts?

  LIndsay

  My apologies for the lack of detail... I know better than that.  Luckily I thought about it the problem.

  The clip is Ikegami MXF.  The problem was that the first audio channel didn't have any audio recorded to it.  I changed the properties audio clip and disabled channel 1. Voila! The clip was loaded in the source monitor and the sound became audible.

  I found the inspiration for the fix in this thread: http://forums.adobe.com/message/4324033#4324033

  Thanks for the research!

  Lindsay

• Impossible to select the source for the tool clone using Alt + click in items 10 - please help

  Ive just installed 10 items, but for some reason any Im unable to choose a source using the tool clone by using the alt + click, Ive tried everything, and it is now driving me crazy.

  Please let me know if you have any suggestions that may help.  Thank you

  R_Kelly and Ken - thanks a lot for trying to help.

  IM happy to say that I managed to solve the problem - I thought I had tried every option possible IE the CTRL, alt + shift, alt gr etc etc, but I had not tried the SHIFT key on its own because it works!  Thanks again.

• driver for the w2558hc monitor problem

  I looked at previous posts and cannot find answers to the problem I have.

  I have a new HP Touchsmart Tx2 laptop, running Vista Home Premium 64 with memory 4gm. I just bought a HP w2558hc monitor. Attached to the Tx2 via DVI and USB provided. Oiginally installed ok with drivers and the recognition of the monitor.

  Updon last updates from HP and MS it won't recognize the monitor. I reloaded the drivers but the Tx2 will not find drivers w2558hc so he sees it as a generic monitor. When pilot reloading I "Access denied" sometimes but not other times.

  I spent hours on the phone with HP support yesterday. We me finally to run the DRVFix tool - which I did. I reloaded the drivers w2558hc OK, but the Device Manager and HP My Display still will not recognize the monitor - only as a generic monitor.

  Would appreciate any help / advice / tips! Really frustrated with the support of HP because they can't fix it. Thank you.

  Thank you very much for your answer. I tried the UAC road without success. In fact, I tried the driver specific monitor HP to take advantage of the many features included with it. I solved the problem and the solution follows.

  My solution:

  Got a copy of a document from HP called: HP w2558hc LCD Monitor driver. Follow the directions for my Vista Home Premium 64 environment and goes to the manual (INF and ICM) section driver installation... then the section Microsoft Vista Home and business editions. Followed the instructions step by step and low and here is it worked.

  It was after hours on the phone with two different HP support groups. Sure am glad I got softtware HP work CORRECTLY with the HP hardware!

  Once more, appreciate your help and your advice.

• Get the serial numbers for the HP monitor?

  Hello

  I need to get the serial number & s 100 HP monitor model numbers to estimate the warranty end dates. Of course, also for our future inventory internal

  I think that's not possibe with HPDM as a device of Numebers series TC traction.  Is it possible/script to get the serial number of the monitor. ???

  Thank you

  DIN

  Finally, I have a script to get the serial numbers of the monitor.  Rename the attachment to info.vbs
  
  OUTPUT
  
  C:\ > cscript/nologo monitor_info.vbs
  Computer name not found, using the local system.
  Serial number: MXL9040HWP
  Maximum capacity: 4194304
  Maximum capacity: 4096
  Reference number:
  Serial number: MXL9040HWP
  Inventory number: MXL9040HWP
  
  Monitor has)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 264 b
  .......... Manufacturing date = 9/2006
  .......... Serial number = CNK6380R6C
  .......... Name of the model = HP L1755
  .......... EDID Version = 1.3
  Monitor B)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 264 b
  .......... Manufacturing date = 9/2006
  .......... Serial number = CNK6380R6C
  .......... Name of the model = HP L1755
  .......... EDID Version = 1.3
  Monitor C)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 26FB
  .......... Manufacturing date = 4/2009
  .......... Serial number = CNK9170083
  .......... Name of the model = HP L2245w
  .......... EDID Version = 1.3
  Monitor D)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 26FB
  .......... Manufacturing date = 4/2009
  .......... Serial number = CNK9170083
  .......... Name of the model = HP L2245w
  .......... EDID Version = 1.3
  Monitor E)
  .......... Manufacturer ID = NEC VESA
  .......... Device ID = 61BE
  .......... Manufacturing date = 7/2001
  .......... Serial number = serial number not found in the EDID data
  .......... Model name model = not found of the EDID data descriptor
  .......... EDID Version = 1.3