Suggest a "workflow" for speech text now this feature has been removed from the Abobe products?
I use the CC prelude as my tool main ingestion/logging to my media clips. Until the end of 2014, I used some Pp and ME for the speech to text. Was not perfect, but a little work at least allowed to incorporate metadata script. Since Adobe decided to remove the feature from all of its products, can anyone suggest a new workflow, or a third-party product (the Mac-based) that I can use and import into prelude or first?
Thanks for your suggestions.
Hi Bfrancav,
bfrancav wrote:
I use the CC prelude as my tool main ingestion/logging to my media clips. Until the end of 2014, I used some Pp and ME for the speech to text. Was not perfect, but a little work at least allowed to incorporate metadata script. Since Adobe decided to remove the feature from all of its products, can anyone suggest a new workflow, or a third-party product (the Mac-based) that I can use and import into prelude or first?
Thanks for your suggestions.
You can use an earlier version of prelude to treatment and then import these data into the current version of Premiere Pro. More details here: http://blogs.adobe.com/premierepro/2014/11/update-on-speech-to-text-functionality-in-video - tools.html
Thank you
Kevin
Tags: Adobe Prelude
Similar Questions
-
Where is the data Panel in Dreamweaver CC? This feature has been removed?
Where is the data Panel in Dreamweaver CC? This feature has been removed?
Mike
There has been a lot of discussions about this. Server behaviors are passed to CC.
You will need to apply the workaround Extension described below.
http://blogs.Adobe.com/Dreamweaver/2013/06/a-look-at-the-modernized-Dreamweaver-cc.html
Nancy O.
-
the ibm product recovery feature has been removed from this system
I have a thinkpad R51, and recently, I decided to reset to the factory settings. However, I also had installed linux and when I tried this it has failed and to restart, there was a grub error. As I was doing before, I put a CD in XP randomly and did a fixmbr, but this time, when I tried to restart the entire disk had disappeared. So now, windows no longer existed. Then I installed linux again and followed the instructions here: http://www.thinkwiki.org/wiki/Rescue_and_Recovery to allow grub to access the partition rescue and recovery and tried again.
However, this time when I click on the "content of factory restore", all I get is a saying "the recovery of product feature ibm has been removed from this system"
Is it still possible to reset this top of the Tower, or I have to install my own OS as if he is not a thinkpad?
Thank you
rolandFlagg wrote:
What do you mean by "spare parts installation media? Do you mean buy a BONE altogether?Yes the commercial version of the XP operating system, you have the OEM version of the XP operating system.
-
Driver webcam has been removed from the Dell computer and now am unable to fix it.
Original title: Webcam Dell problem
Hello
I have laptop Dell Inspiron N411Z. Dell did not provide users with any webcam device drivers and windows update does not install the drivers by itself. In addition, it happened that windows update installed the driver webcam last time and webcam works for two days after that I don't know how but the driver has been removed, or I don't know exactly what happened.
If call us Dell they ask us to install Dell central webcam which has nothing to do with driver (I don't know what kind of support they have). If there is no driver Dell webcam central does nothing.
I don't know exactly how it goes, but if windows update installs the driver which means driver exists. If anyone would be able to send me or give me a link to the Dell webcam driver?
I hope that Microsoft would be able to help me with this. I tried what you might think. I installed windows several times. There is no imaging device in Device Manager in case someone wants me re-install the drivers that I said before windows ever installed the drivers. I just need an .exe file that runs my webcam.
Dell Inspiron N411Z
Webcam part number: T3NPC
Thanks in advance
Hi Jeet,
This problem is usually caused due to hardware or driver related issues. As you mentioned, I was not able to find all the drivers for the webcam. But I've seen threads in which he asks customers to install the Webcam Central software. I suggest the following methods and check if it works for you.
Method 1:
Try the procedure described in the following Microsoft Help article and check if that helps. This article consists of the steps to use a webcam.
See the following Microsoft Help article to learn more about the use of a webcam.
http://Windows.Microsoft.com/en-us/Windows7/using-webcam
Method 2:
As tech Dell mention of the support team, try to reinstall the Webcam central software and check if the problem persists.
Step 1: To uninstall the Dell webcam central software, perform the following steps:
a. Click Start.
b. click Control Panel.
c. using the drop down next to the opinion of: in the upper right, select large icons.
d. click on programs and features.
e. click Dell Webcam Central.
f. click on uninstall.
g. confirm uninstallation by clicking OK.
h. Once uninstalled, restart the computer.
Step 2: Check out the link next to the Dell forum to reinstall the webcam drivers.
ftp.us.dell.com/.../Dell_SX2210-Monitor_Webcam%20SW%20RC1.1_%20R230103.exe
Method 3:
Try to update the drivers BIOS of the computer manufacturer's website and check if the webcam works.
See the following article from Microsoft Help to update a driver.
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
Please reply with the status of the issue so that we can better help you.
-
I used sync to synchronize passwords between two laptops, but I want to know if was to disable this feature will be the passwords are kept on the server? If this is not the case, how to remove them.
No they are not deleted from the synchronization server when you disconnect the sync, but if you change your password for your Firefox account all your data will be erased of the synchronization server.
-
Payment plan 'picture '.
Money was withdrawn from the account, but creative cloud changes were products on the site and also does not appear on the site as my payment was perfect (but money was withdrawn)
Sorry for my English.
Hi Vladislav % 20parfyonov,
I saw the Adobe ID (email address) you used to post here and can see that you have a plan of creative photography of cloud are recorded.
Please make sure you use the same Adobe ID (email address) that you used to purchase the subscription to connect to the Web site.
Adobe trial and purchased applications are the same, you can download the application once installed, creative cloud it invites you to connect, use the following link: Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial
Once logged in go to APP and tab install CC 2015 Photoshop and Lightroom CC 2015 from there.
* NOTE: Please make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it then just turn off the firewall for awhile disconnect you and you connect on the creative application of cloud and check.
Let us know if that helps.
-
In all recent versions of firefox (that I remember), I was able to type in any word in the address bar and it would take me to what was usually the first result of google, now it takes me just a google search.
For example, I could type in "Wikipedia" and it would take me the wikipedia House directly, now it takes me to a google search the word "wikipedia".
I tried this in a number of betas FF4 nothing helps, it is still missing in the RC. I am disappointed.Any help?
The change between Firefox 3.6. * and Firefox 4 is how the location bar search. In Firefox 3.6, it uses Google search "search by name". With innovation by the name search, it performs a search on Google and if there is a clear match he will take you on the site, otherwise, it shows the Google search result. With Firefox 4 it performs just a search on Google, if you type in something that is not recognized as a URL.
To get the behavior of Firefox 3.6 on Firefox 4, you must change a hidden preference.
- Type of topic: config in the address bar and press on enter
- Accept the warning message that appears, you will be taken to a list of preferences
- Locate the preference keyword. URL, double-click it and change its value on the link below
http://www.Google.com/search?ie=UTF-8 & oe = UTF - 8 & SourceId = navclient & gfns = 1 & q =
-
I accidentally deleted the lower Dell toolbar GPRS PC card icon. Is this a problem? The States of control panel the "Dell TrueMobile 5100 tri-band GPRS PC card is here. I can't run the Icovia space Planner...
Hi Annefly,
Try the step to activate the Dell TrueMobile 5100 GPRS Tri below PC card icon
· To start the TrueMobile GPRS Manager, select Start , programs , Dell's TrueMobile 5100 TrueMobile GPRS Manager
For information, see the user's guide in the link below and check if it works.
http://support.Dell.com/support/eDOCS/network/p59098/software.htm
I suggest that you contact Icovia support for more information on the program.
-
I need help restoring Windows Vista on my computer. Please help this is finals week and I need my computer to take my final.
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash when you're back running.
They will tell you how to do this.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
Since the update for Firefox 4, I offer more the ability to save tabs on shutdown - makes more rapid access to these sites when commissioning the next day. Why this possibility has been removed? It was a feature favorite and saved a lot of time.
Firefox 4 records the previous session.
You can use "Firefox > history > restore previous Session" for the previous session.
There is also a button 'Restore previous Session' on the default on: Home home page.Another possibility is to use:
- Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.
You can set the preferences of warning on the topic: config page true via the context menu or toggle the value with a double click of the left.
- browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
- browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
- browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
- browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart
To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
If you see a warning then you can confirm that you want to access this page. -
I deleted an email in Windows Live Hotmail, who came to my Inbox and foolishly, has now been removed from the deleted items folder is what I can do to recover this?
original title: I deleted an important emailTake a look at http://www.thewindowsclub.com/recover-deleted-emails-windows-live-hotmail
-
Check that this class has been marked with the annotation @Entity
Hello
We have a level of the shared lib App that makes all the APP associated with request for an application. And each application can use the lib goes to get the related JPA query to do.
To define the scope of the Joint Parliamentary Assembly between App. We have created the EMF for each application.
When an application to run and any associated APP action that it works fine, but when trying to run a second application we are seeing the following error message when you try to do a specific action JPA.
the @Entity annotation.
[2012 05-23 T 04: 08:16.839 - 07:00] [WC_Spaces] [ERROR] [] [oracle.webcenter.spaces] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 5825b814-2931-4ad5-8dc3-3e18f66992b7-00000004,0] [APP: webcenterCustom] []
java.lang.IllegalArgumentException: unknown entity bean class: oracle.webcenter.spaces.internal.repository.WcSpaceHeader class, please check that this class has been marked with the @Entity annotation.
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:648)
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:532)
at oracle.webcenter.spaces.internal.repository.SpaceRepositoryUtils.refreshSpaceRows(SpaceRepositoryUtils.java:1791)
Where WcSpaceHeader is an entity.
To create emf by App, this is the code
private static EntityManagerFactory getEntityManagerFactory()
{
String appName = Utility.getApplicationName ();
EntityManagerFactory emf = sEntityMgrFactory.get (appName);
if(EMF==null)
{
EMF = Persistence.createEntityManagerFactory ("SpacesReposPUnit");
sEntityMgrFactory.put (appName, emf);
SpacesConstants.LOGGER.info ("Caching" +)
("EMF for" + appName);
}
return of the emf;
}
My persistence.xml
<? XML version = "1.0" encoding = "US-ASCII"? >
< persistence xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
xsi: schemaLocation = "http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd".
version = "1.0" xmlns = "http://java.sun.com/xml/ns/persistence" >
< name of persistence - unit = "SpacesReposPUnit" transaction-type = "RESOURCE_LOCAL" >
<>provider
org.eclipse.persistence.jpa.PersistenceProvider
< / provider >
oracle.webcenter.spaces.internal.repository.WcSpaceHeader < class > < / class >
oracle.webcenter.spaces.internal.repository.WcSpaceUsrDetail < class > < / class >
oracle.webcenter.framework.service.jpa.WcCommonXlationEntity < class > < / class >
oracle.webcenter.spaces.internal.repository.WCNavigationActivity < class > < / class >
Properties of <>
< name = "eclipselink.session.customizer property"
value="Oracle.WebCenter.spaces.internal.repository.SpacesEclipselinkSessionCustomizer"/ >
< / properties >
< / persistence - unit >
< / persistence >
Another problem I see in this is that. When I create an EMF EM, (which is different for different app) and do a query, I get a class cast Exception.
[(self-adjusting)'] [ecid: 5825b814-2931-4ad5-8dc3-3e18f66992b7-00000004,0] [APP: webcenterCustom] []
java.lang.IllegalArgumentException: unknown entity bean class: oracle.webcenter.spaces.internal.repository.WcSpaceHeader class, please check that this class has been marked with the @Entity annotation.
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:648)
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:532)It is a problem of class loader, somehow you have deployed the same classes in two places, have two versions of the classes.
How, exactly made things, where are your domain classes?
The questions is more likely that,
Persistence.createEntityManagerFactory ("SpacesReposPUnit");
always returns the same plant once it has been deployed.If you pass a map properties for createEntityManagerFactory and set the property "name eclipselink.session" a single value, then you should get a new plant.
-
"Malware has been removed from my computer. Click here for complete uninstallation"
I received a new icon indicating "Malicicious saoftware has been removed from my computer. Click here to complete uninstallation. While I try to close the pop-up window, it won't go away and keeps poping... I'm afaid if I don't click it... It will launch... Has anyone seen yet? Security check of the Iran Microsotware... He found nothing
HelloYour computer is probably infected by malicious software. Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.Brian -
My parents has been removed and the game of solitaire on their computers. How can I find and download one for them
You still have the Windows CD?
Follow these steps how add or remove games in Windows XP
http://support.Microsoft.com/kb/307768 -
Try to change the wallpaper, it says that this feature has been disabled contact admin system
original title: wallpaper
Try to change the wallpaper, it says that this feature has been disabled contact admin, me, system how can I get rid of him?
If you did not disable the ability to change the desktop background, then you can be infected with some form of malware on your computer. I would recommend that you run that a full and spyware antivirus scan to make sure that your computer is clean.
Try this:
1. click on start-> Type on the start search: type gpedit.msc-> press ENTER.
2. under Local computer policy, expand "User Configuration".
3. under User Configuration, expand "Administrative Templates".
4. under administrative templates expand 'Desktop '.
5. under the desk, click on "Desktop", on the right pane, double-click "wallpaper".
6. on the "Desktop WallPaper properties" click on the option button "not configured".I hope I could help
Maybe you are looking for
-
Change the orientation of the name axis Y in a chart
Hi all! I'm trying to change the orientation of the name of the axis Y in a chart. I could not find nor all the attributes which allows me to do this easily, or anything on the forum about this. Any ideas? Thanks in advance ZB
-
I have a HP all-in-One 8600 and am printing from a Mac running 10.6. I changed the layout to 6.5x10, but get a message that do not match the printer and paper size.
-
I had a problem with a virus. Used Microsoft security programs to remove it. However, when I click on START / all PROGRAMS /, most programs do not display on the screen. Any ideas on how to solve this problem?
-
p6717me-m: map graphic and RAM upgrade compatibility
Hello I have a HP p6717me-m, running a Nvidia GEforce405 and 4 GB of RAM by default. Im a gamer and mainly using the pc to play games like Counter strike: global offensive. But I am only able to run the game in low details ultra and still get only 30
-
Error loading c:\windows\afaxotum.dll
by turning on the computer, I get the above error message and have no internet connection, the computer is connected to a router.