SuperDrive fusion MBA 3 not accepting do not record
Hello
I am on trial for VMware fusion 3 and I would buy it if it can accomplish my needs for me. I am trying to install windows software on the virtual machine through my reader superdrive for mac book air. I run the virtual machine and connect the player, it asks if I would like to plug into OSX or the virtual machine and select the virtual machine. I see on the virtual computer recognizes the drive and he said: it has been installed successfully. I can also see that he listed in 'my computer '. The question I have however is that the reader does not accept disks. When I put a disk in the superdrive drive, he only will not sucked into the reader, almost as if there is not power. When I plug the player through OSX instead, it works perfectly if it is not a problem with the drive. I also tried to hook the reader up to OSX, insert the windows disk and then remove the disk and it reconnect to windows with the disc already inside. When I do that, as soon as the drive is recognized by the VM, it spits out the disc. I wish I could get this to work as soon as possible. Thanks for any help!
EDIT: btw, I am running windows 7 as the virtual machine! Thank you!
I suspect that the Superdrive want maybe more power that allows the USB specification, and Windows doesn't know how to tell the reader that everything is OK. So in addition to using an image .iso as suggested by WoodyZ, another possibility is to connect the Superdrive as an optical drive as opposed to a USB device. When prompted, connect it to the Mac, and then select the Virtual Machine > CD/DVD > CD/DVD connect.
Tags: VMware
Similar Questions
-
my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available
Reset the SMC.
Barry
-
iPhone'S will not record voice memos
Hello! My new iPhone IS will not record voice memos. I can open the app very well, but when I press the record button it shakes just for a moment and then stops.
The software is up-to-date (iOS 9.3.1), storage seems adequate (6.0 GB used, 5.6 GB available), MIC works fine in other applications (voice control, camera), so I'm not sure what the issue could be.
Thank you!
Try a forced reboot - after open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.
Meet the sleep/wake and home buttons down until you see the logo - then release and allow normal start upward
If this does not work
Please take a genius appointment at an Apple Store, or select another authorized service provider.
-
I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.
Thank you for taking the time to help me!
-
A year ago, the camera suddenly started flashing and beeps a yellow icon in the middle of the screen. C:31:23 flashes in the upper right corner above the minutes from the end. The camcorder will not record or play.
If I remove and reseat or change the battery, and if I remove and reinsert or pass the minidisk, sometimes it'll save or play for a while before the beeps happen again.
Sunny in Sun Valley
Try to check the pin of pinch. Open the container of band and you can see the PIN pinch, is a small black roll about 1/4 in. wide and about 1 inch in height, see if she's down on the stem
-
Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent
My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.
When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.
Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?
Hi guys
Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.So I see only two possibilities:
Either you will charge the battery for real-time clock, or you ask the technician for replacement.Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
If it will not help solve the problem if you contact the ASP for the RTC battery replacement. -
Paired Remote App not recording not peel after restart of Apple TV 4
Paired Remote App not recording not peel after that Apple TV 4 is restarted.
I have paired a remote with Apple TV 4, but that pairing is not saved after I power cycle the Apple TV 4. I checked with an Apple TV 2 and it stores the remote pairing when it is the power to bike.
Y at - it a setting or something I missed? Or is this a problem with the current software on the Apple TV 4?
Thank you
-Jeremy
Oh, it's working now. It was a problem with the device I have matching and not the Apple TV 4. Disregard this message.
-
my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.
HI - try the following steps:
On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):
-Double-click the Home button, and then drag upward on each of the app previews to close.
It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
-To switch on: press and hold the side button until you see the Apple logo.
If this does not resolve the problem, try next disconnect and rematching of your watch:
-L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.
-Choose to restore the watch (backup restore) when provided the opportunity during the whole.
-Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
-
the R channel does not record on ION U RECORD.
the R channel does not record on ION U RECORD.
original title: ION U RECORD.Hi Patrice,
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
http://support.Microsoft.com/common/international.aspx
Thank you
-
I checked the save my email address box, but it does not record
original title: can not enter hotmail sign to save my e-mail addressHello
As the issue is specifically related to Windows Live Hotmail, I suggest that you post the question on the link provided below for assistance.
Hotmail Portal
-
Built-in microphone does not record
I have a Toshiba laptop with a built-in webcam and microphone. For some reason, the microphone has stopped working - I can not record sound or having people hear me on Skype - if it says that it works correctly when I open Control Panel is. What should I do?
Hi Eryx,
You have made any changes to your computer recently?
I suggest you to follow the steps and check if she dreams.
Run Microsoft Fix - it for the link and if it helps.
Diagnose and automatically fix problems audio and sound recording
-
Try to burn the DVD when getting message the disc is not recordable
When you try to burn the DVD we continue to receive the message that the disc is not recordable. Please insert a recordable or rewritable disc. We tried the following blank dics, the DVD-R DVD + R DVD - rw and DVD + rw. Any suggestions?
The following links may be worth a visit:
(982116) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
(Windows XP / Windows Vista / Windows 7)Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsAlso I have seen reports that the use of a technology mobile broadband
device such as a USB Dongle can cause problems...See the following link:
Dongle Internet cache burner
http://www.windowsdvdmaker.com/forums/thread/1905.aspx -
Sound Recorder does not record
Sound Recorder does not record when you select Save the meter shows no activity and there is no reading. When I tested with Skype this counter moves indicate he picks the sound, but reading all that was heard was a buzz. The microphone works fine with Yahoo messenger for calls to land lines to cell phones and Computers computer 2
Sound Recorder does not record when you select Save the meter shows no activity and there is no reading. When I tested with Skype this counter moves indicate he picks the sound, but reading all that was heard was a buzz. The microphone works fine with Yahoo messenger for calls to land lines to cell phones and Computers computer 2
===============================================
Maybe the following response has already posted by: Azam K. would be worth a peek:Sound Recorder does not not under Vista
http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/cf6003b6-AADD-4107-a1b7-2c9b88a3f48bVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Why my microphone does not record any sound?
So, I try to activate the sound of material & sound-> Sound-> record, succeed in that, then try to test. And my microphone does not record anything yet (I have the latest drivers), it is a headset and it is not silent. I've reconfigured it, it didn't work.
So I tried a new micro, it worked too.Can you give me an answer to what is happening and how to fix it?Hello
Did you change your computer before this problem?
Try the following steps to cross check if the microphone is correct.
a. Click Start, type mmsys.cpl in the search box and press ENTER.
b. in the sound dialog box, click the recording tab.
c. click Microphone, and then click Properties.
Note: Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
d. in the properties of the Microphone dialog box, click the custom tab.
e. turn on or off the amp Microphone check box.
f. click the levels tab adjust the slider for the volume to the desired level and then click OK.
g. click OK to close the sound dialog box.
See also:
Open the troubleshooting of Audio recording
http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
Connect one microphone, music player or other audio device to your computer http://windows.microsoft.com/en-US/windows7/Connect-a-microphone-music-player-or-other-audio-device-to-your-computer
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
-
Windows Media Center does not record the calendar.
Planning to record a program, but sometimes lapsed time up to the point where it does not record. I am running Windows 7 Home. Yes, I checked preferences but which differs only up to 15 minutes max. I have reinstalled twice already. Why please?
Hello
(1) did you make any changes before the show?
(2) what is the brand and model of the computer?
Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.
-If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.
-Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.-Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:
a. do not close Windows Media Center before you put your computer on standby or hibernation.
b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.I would have you refer to the article below:
Why my TV did not show record in Windows Media Center?
http://Windows.Microsoft.com/en-in/Windows7/why-didn
Please let us know if that helps.
Maybe you are looking for
-
The same sites still open in Firefox. How can I remove them?
I have Firefox 12.0. Recently the same five sites when I open Firefox always open. I have cleared my cache, cookies and history and delete history Web pages individually, but they always come back. Three computers that are synchronized, all have this
-
How to remove the supervisor on CT 100 password?
I want to remove my supervisor password, because I remember can´t. What should I do?
-
Portege R500 BIOS update 1.60 - WIN
Hello I was watching the update of the BIOS available on download since 25-03-08 pages 1, 60 - WIN. Anyone know what is the update?The explanation on the download page says simply: + "This Bios update adds functionality to your system." + Thanks in a
-
Lanman Server shutdown service
LanMan server service is shutdown state. We had an error because Windows is not genuine. Service of Cluster Failover is down. Event logs are not accessible.
-
Hi, I have the icon for AutoUpdate on my toolbar, when I install I see what the update even I have installed at least 6 times, the update is: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)