Support for the 'grouping' Dual LAN

I bought a router of WRT600N, which was far & away the router wireless dual band to use more expensive (& only) available at the time + 2 compatible Ultra Range Plus USB receivers.  Apparently Linsys/Cisco decided to abandon this model & more support - still firmware version 1.0 (from 2008).  OK, then repeat ceMarketing not high on their priorities.

I recently upgraded my hardware in a platform Intel 1156 running Win 7 Ultimate 64-bit completely.  The new motherboard, a Gigabyte GA-P55-UD5, has a 'dual LAN' support that allows "bundling" - potentially 2 GB support & self-switching if a port is not functional.  Apparently, it requires a router that has 'IEEE 802.3ad' capabilities.  As far as I can tell, this potentially interesting feature only is not supported, & the firmware upgrade failure suggests it will be never. - bought their "Network Magic" software Pro to add another $50.

So the question is this: I believe - no double support LAN is built in & never will be--or is there a way to use this feature?  Suffice to say, if I paid about $420 for the router & USB receivers where if other router support him on the level of consumption, I will never consider a Linksys/Cisco product in this life.

Thanks for some clarity - that someone has to offer.

I would say the associations are no consumer router function. If you really need a connection of 2 Gbps to a single device to your network, I wonder what other device to communicate with this speed. It is not only another device because it would have only 1 GB/s unless you team two remaining ports as well. (Do not forget that desktop computers more level of consumption are not yet fast enough to offer or receive data at a rate even if they have a Gigabit ethernet port).

If you have a set of other features which, in combination, require 2 Gb/s access server, then you will have again the same problem: it must connect somewhere which means you need a switch that must be connected to the two remaining LAN ports. But then, you might as well get a switch that supports reunification and enough ports and connect everything what he. Of course, an ethernet switch that supports the grouping is usually some 'smart' managed switch that cost easily more then your WRT600N.

So I think that grouping will be never supported on any Linksys consumer device. If you then you must watch the Cisco Small Business series or better. They have some devices supporting 802. 1 q VLAN and therefore potentially also 802.3ad. Although even in this case I doubt because given the number of ports available on these devices is not really a lot of sense to support at least on a router 4 ports. Devices consumer and SOHO are not for internet connections of 1 Gbit/s or more. So you can only use the speed inside the LAN, but with 4 ports that would be difficult... So I would say that by their design these routers don't support grouping. If you need grouping within your LAN, get a managed switch...

Tags: Linksys Routers

Similar Questions

  • Internet does not work on Windows 7, no drivers for the Wifi and LAN

    Original title: Windows 7

    I used to have Windows 8 on my laptop. Well, so I've updated for Windows 10. Config my laptop wasn't as good, so it's slow. Recently, I installed Windows 7 (as it is known for the performance) somehow, the internet does not work. Missing the drivers for the wifi and lan. What should I do?

    Well, as my readers usb and touch screen no longer work.

    You have installed Windows 7 on a machine that is preinstalled with Windows 8, without checking first if the computer manufacturer supported and provided Windows 7 drivers for it.

    If does not support or provide Windows 7 drivers for this, you should never have installed Windows 7 on this computer Windows 8 and we cannot help you.

    Reinstall Windows 8.

  • Where can I find detailed, systematic support for the advanced Thunderbird related topics?

    In moving from XP to Windows 7, I opted for Thunderbird as a mail client in order to circumvent hyper intrusive Windows Live Mail to Microsoft (I used Outlook Express for years).

    I have a very complicated E-mail structure, and it took me weeks (seriously) to learn how to reproduce it in TBird. Now, I try to customize TBird more, but none of the TBird articles/forum Q & A / searches on Google to ask my questions.

    There is no support direct tech TBird, and I'm almost ready to leave for good. However - a last effort: where can I find detailed, systematic support for the advanced Thunderbird related topics?

    Thank you.

    https://www.flossmanuals.NET/Thunderbird/

  • Add support for the new html tag

    Most browsers have support for the < object / > tag.

    I want to integrate a video player on my site to play .mkv videos, but I can't use most because him are based on flash, which can play only .flv & .f4v.

    That's why I go to the < object / > tag

    But, if I wanted to integrate a tag with the name of < mkvvideo / >, a simple plugin that is associated with this tag would be usable or Basic programming of the firefox browser which deals?

    Thank you

    If you want to integrate MKV videos in a web page, see

  • Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

    Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

    This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

  • When does support for the end of windows vista Home premium

    When does support for the end of windows vista Home premium

    Original title: support

    Watch the news of Vista on this page:

    http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  • Software support for the Dell Management Pack Suite - Dell VRTX SNMP monitoring

    Hi-

    Anyone know where I can get the support for the continuation of the Dell Management Pack - Dell Poweredge SNMP monitoring in SCOM VRTX?

    Thank you

    Hello

    Please visit our Dell Tech Wiki Page for more information on Dell Server Management Pack and forum for your comments and observations.

    Thank you

    Srinivas Carlos.

  • BlackBerry smartphones is supported for the East Asian languages for the Blackberry Bold 9780 on O2?

    Hello, I hope someone can help me with my problem. I'm new to the whole Blackberry I just bought my first BB camera a few days ago so please understand if I don't know what words are in the world of Blackberry. The questions will be in bold.

    So, I recently bought a Blackberry Bold 9780 and I am very satisfied with the overall product. However I was wondering if there was support for the East Asian languages (Chinese, Japanese, Korean etc) for my 9780 BB which is on O2 UK.

    Right now, in my languages options, I can only entry for most European languages (English, Spanish, French, etc.) There are no options for languages of East Asia at all. When I try to display all messages or go on the browser which are languages of East Asia, I don't see one set of black boxes.

    I know there are software updates to update your device to take charge of specific languages, so I checked the software downloads page that interests me.

    O2 - UK users, they have two packages:

    -BlackBerry Handheld Software v6.0.0.905 (all languages)

    Package Version: 6.0.0.905
    Composed of:

    • Applications: 6.0.0.294
    • Software platform: 6.5.0.54
    • File name: 9780AllLang_PBr6.0.0_rel905_PL6.5.0.54_A6.0.0.294_O2_UK.exe
    • File size: 180,72 MB

    -BlackBerry Handheld Software v6.0.0.0905 (Multilingual)

    Package Version: 6.0.0.905
    Composed of:

    • Applications: 6.0.0.294
    • Software platform: 6.5.0.54
    • File name: 9780jAllLang_PBr6.0.0_rel905_PL6.5.0.54_A6.0.0.294_O2_UK.exe
    • File size: 185,61 MB

    Then How do I know which package I currently installed on my device because the application number and the number of software are identical.

    On my device it details shows: v6.0.0.294, (905 Bundle, platform 6.5.0.54)

    So I wonder if none of the above two packages have the option to enable East Asian language support.

    I'm sure I have the latest update for my camera that I can't update more far depending on the desktop software and my phone. So If I move to another package, how do I go to do?

    I mainly use a MAC, but I can also have access to a PC too. I don't know if it's important, but I think that there is a difference between the Desktop software on each computer that is used to update your software.

    If possible, it is that I would be able to download another package that has the support of another service provider East Asia and update on my own? Or is it too risky because it may crash my machine?

    And my last question, so it is likely that O2 can do in the near future if there is no option for the language support East Asia now,?

    Sorry if I rambled on a bit too much or too many questions. I just want to know if its possible to enable language support is now, otherwise I will waste countless hours looking for a method. I looked to see if there were similar questions, asked the Board of Directors, but none was really specific to my needs.

    A big thank you to everyone who sits reading through this. I appreciate the responses.

    Thank you.

    Do not know if you understand how to do this, but I did these steps and it worked fine:

    1. https://www.blackberry.com/Downloads/contactFormPreload.do?code=7D2A383E54274888B4B73B97E1AAA491&dl=... go here and download the version of v6.0.0.0905 (Multilingual) BlackBerry Handheld Software.

    2 install the downloaded OS on your computer, you need the files of this new OS more later to add multi language support for your BlackBerry device.
    C:\Program Files\Common search in Motion\Shared\Loader Files\9780AllLang_v6.0.0.294_P6.5.0.54
    The CJK.alx is the file that you will use later.

    3. use Desktop Manager to save your BlackBerry (better safe than sorry)

    4. before installation, go to your AppLoader folder, for example C:\Program Files Research In Motion\AppLoader and move the Vendor.xml to a backup directory, if you have kept a copy of the file. The loader.exe allows to load up the AppLoader, follow the instructions in the wizard.

    He automatically gave me a list of applications and languages, if you scroll down see you East Asian languages check those you want that I checked Japanese and Thai language and font support. If you do not see these click on 'Add' at the top and navigate to the CJK.alx file.

    So let the application loader it's thing, after that everything should work.

    Hope this works for you also. I take no responsibility of bricking your phone.

    BlackBerry should be an option to install more languages via the phone.

  • No support for the Nikon D7200? Seriously?

    I just upgraded from the Nikon D7100 to the D7200.  I was shocked and very disappointed to see that Adobe is not support for the D7200 files.  I use ambient light for all of my editing, and it is essentially useless to me now.  WHEN will Adobe be be solve this?

    In fact, it was fixed quite earlier. Support has been added in Lightroom 6 and Lightroom CC 2015. Apparently, you may be using an older version of Lightroom, 5.7.1. The D7200 came out after updates that version had been released, and there will be no updates Lightroom 5. You can either upgrade from Lightroom 6, or you can use the free DNG Converter to create copies DNG that you can use in older versions of Lightroom.

  • Can you please put me in touch with support for the trial version of adobe acrobat pro XI that I had tried on 15 March for 30 days. I tried to cancel because the cost is too, and Acrobat Reader are good for me. I can't uninstall program.

    Can you please put me in touch with support for the trial version of adobe acrobat pro XI that I had tried on 15 March for 30 days. I tried to cancel because the cost is too, and Acrobat Reader are good for me. I can't uninstall program.

    I had to wipe my drive since then with the trouble with Apple Store without acknowledging my machine and Time Machine reloading gave complications. Can you please cancel my trial and make my money from trial.

    Hi jack gordon.

    Adobe does not charge for the 30 day trial, but it seems that you have subscribed to Acrobat Pro (as a simple app for creative cloud membership) return March 15. To cancel your subscription, please contact customer service.

    Please let us know if you have any additional questions.

    Best,

    Sara

  • When will Hi there, there be support for the Olympus PEN E - PL7?

    When will Hi there, there be support for the Olympus PEN E - PL7?

    It's on our radar and hoping to incorporate it in a next update.

    As soon as it is available, it will be updated in the article below. Camera Raw plugin | Compatible cameras

    ~ David

  • Captivate in 8, can you apply an effect (for example, a transition) for the grouped shapes? (I can apply the effect to a single shape, but when I group forms, I can't understand how).

    Captivate in 8, can you apply an effect (for example, a transition) for the grouped shapes? (I can apply the effect to a single shape, but when I group forms, I can't understand how).

    Hello

    It is not possible to apply effects to groups of forms. You can apply the transition from the distribution panel and other properties in the property inspector.

    You will need to apply the same effect of the same duration for all objects in a group in this case.

    Thank you.

  • VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

    Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

    Thank you

    -Ron

    UInt32 numCleanedUp = 0, numRemaining = 0;

    /= VDDK 1.1 header says connection spec should be null =/.

    connectParamsP - & gt; vmxSpec = (char *) NULL;

    vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

    vixError (6) - the operation is not supported for the specified parameters

    Ron,

    I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

    Thank you

    Annick

  • Add support for the iPhone in an application already published

    Hello

    Is it possible to add support for the iPhone to a multi-folio application which we have already published in iPad format.

    If so, what are the steps before you download a .ipa file revised to Apple for review?

    There are a few paragraphs on the update of the application in general on p58 here but nothing specific to add support for additional platforms to an existing application.

    Thanks in advance for your help.

    Ross

    You must do two things to make your application work on the iPad and the iPhone:

    1. create fact sheets for the iPhone.

    http://help.Adobe.com/en_US/digitalpubsuite/using/WS4cb2576c7954973c-70d16164136e6c7cfbc-8 000. HTML

    2. create and submit a new version of the viewer using DPS App Builder. Select iPhone and iPad. Use the same files mobileprovision and CERT.

    You also need to create some application icons and splash for iPhone screens.

  • [Consolidation-locked] Support for the Nikon D600 RAW?

    When the update of Adobe RAW will build for the Nikon D600?

    Title of the message was edited by: Brett N

    Lightroom and Camera Raw 7.2 4.2 (11 items) are currently available and provide support for the Nikon D600.

    Go to help > (check) updates installed.

    Please visit: http://forums.adobe.com/message/4785056

Maybe you are looking for