Support of different material in ESX4?

Similar Questions

• Office 2010 Activation - VMware View 5.2 different material

  I could use a little help.  Here's the situation.

  I have a new view environment.

  I have 3 ESXi 5.1 servers - we'll call it Host1, Host2, Host3.

  Host1 is brand new and slightly different from Host2 and Host3. (They are a bit older)

  I did all my tests on Host1.  Including build my master Windows 7 Image and install all of the applications that I need.

  As part of the master Image, I activated Office 2010 before making a snapshot and pushing through related clones.

  Linked clones are now balanced between all 3 hosts as it should.

  All of my users who have VM on Host2 and Host3 now see 'Office 2010 Activation' screens.

  Seems Office has detected a difference in the level of material and is asking them to "Activate Office" again and they have no administrative permissions to do this.

  An idea of the best way for me to get around this problem?

  If I manually activate Office - he goes - right up until I do a restructuring - then it returns.

  Thanks in advance.

  You use a KMS server to activate office or try to use a MAK key?    It is considered to be best practices when dealing with view to use a KMS server

• Re: Supported on different languages

  I bought my laptop in Czech Republic. Now, whenever I have to contact the support, I'm redirected to site Czech support as soon as I get the serial number. I don't speak Czech, nor I intend to learn it soon. Although the site offers only Czech, Slovak and Hungarian versions. WHY?

  Why can't English or French or Spanish or one of the other languages I speak? What is c?
  Guys, it's really through the logic. Do you know how many non-tcheque speakers? A lot.
  It is the policy of the company "everyone who bought a laptop in the Czech should speak Czech"?

  > I am redirected to site Czech support as soon as I get the serial number.

  It seems that the language of the Web page is based on the serial number you typed in the search engine.

  The script on the website 'knows' s notebook serial number and automatically redirects to the Czech page because your laptop is now available for the Czech market and was preinstalled by a Czech system.

• upgrade to support/drivers of material for Pavilion dv8000t with Win 7

  Just upgraded my 2005 HP Pavilion dv8000t for Win 7 32 bit home premium.  Only XP was initially available, and now HP support will not recognize anything whatsoever to allow driver downloads.  Anyone else run into this?  Ideas, suggestions?

  Thank you very much

  Darth

  Hi, Darth:

  Use does not install drivers for the devices that update of windows Vista.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1832444#N614

  If you cannot connect to the internet, please post the hardware ID's for Ethernet controller and network controller.

  I will guide you how to find the hardware for the network controller ID, and if you want, you can post the hardware ID's for all the missing devices, and I'll see what I can find.

  Go to Device Manager and click on the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN

  If your model has a bluetooth radio, Vista driver will not work, so here's another model W7 bluetooth driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76382_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• using a different material of the same type

  Hello

  I wrote a code in LabVIEW and data acquisition that I pointed out where the signal will be sent to the and where it will make the acquisition of. I use USB6009.

  It turns out that when you use a different USB6009 the program will not work because it has a few other serial numbers. I need to configure the program for EACH DEVICE no matter if the appliance is of the same type?

  How about exe? Suppose I want to send a package to someone away who has same device type but of course physically different?

  (this is a basic type question but I'm always hard to find answers to my questions generally find manuals and materials to get a good point of departure-> a novice can really get lost)

  
  

• Will the concept AD LDAP Referral supports two different forests

  Hello

  I have areas DomainA under ForestA and DomainB in ForestB. I would like to implement the concept of LDAP Referral for these two areas, so I have set up between these two areas and add a crossRef under CN = Partitions for DomainA and trying to search for DomainB users using ldp.exe DomainA.

  But it seems to not work.

  LDAP Referral Concept is supported in my case?

  I read somewhere that ads supports LDAP Referral for domains that are in the same forest, is this true?

  Can someone help me with this? Please let me know if I am missing any configuration.

  Thank you

  Phani

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Theme Support for different models and some newbie questions

  Hello, I'm new in the creation of theme BB and I need help. I created a theme on Theme Builder 6 for the Curve 9300, the type of provision is Blackberry 6 and the screen for this model size is 320 x 240. The problem is that I don't know what to write in the description on the supported models. I exported the zip file and the devices.txt file States that 9300 theme is for OS6. I need to know what the other models are supported? Or what I need to re-create for other models of same screen size? I'm really confused, and I'm not a BB user too. Also I don't know what produced icons and images recommended should be, I guess they are a type similar to those observed when hollow searching App World themes. And the calendar icon does not always change in the Simulator, I read that it is a bug in Theme Builder.

  Hello

  No matter what model of BB with the size of the screen of 320 x 240 and that runs on Blackberry OS6 theme will work. However, the theme will not work for a device with a screen size of 320 x 240, AND that run on Blackberry OS5.

  If you just need to do a bit of research on the screen sizes and device operating systems.

  Regarding the priduct icon, it is simply the image of the "App" icon The descriptive is the image that appears if your theme is featured on the app world. This is the only time where the featured image is used.

  Hope that helps.

  Kind regards

  Flow

• CF 11 Enterprise install App Server and IIS 8.5 on Web server (different material)

  Hi all.

  Facing a problem of configuration to set up here.  We have the application inside the firewall server and we will have on the DMZ Web server and this web server has to forward the requests to the server see

  I installed cfusion instance HTTP Port 8500 remote Port 8010 host is a local host, with no cluster.  We will have other forums as a result of a port in addition to HTTP and distance on the line.

  So now the question is how to run the connector.  If I run the embedded {cfroot}/cfusion/runtime/bin/wsconfig.exe, it shows localhost as server applications, well, the web server must be IIS, but on another IP address NOT this server, so that the OK button remains grey.

  You would think that you would need to run the connector on the Web server, right?  Well, I do not have CF installed on it, nor do I intend install on my web server, so how do I get on the Web server connector.

  I read a post on taking a wsconfig.jar and pulling the DLL and others, but it is with JRun 8 CF, CF 11 and not IIS 8.5.  Maybe it's the method that I need to follow, but seems to be the new land that has never been displayed in the CF community.  I like to think I'm 'special' but really?  I'm the first to have this set up the configuration, and no one has posted a BLOG about it.  Looks strange OR I'm totally missing something.

  Please let me know any suggestions on how to move forward.

  Running on window server 2012 R2 for CF Application Server and the Web server.  CF 11 E update 3.

  ColdFusion 11 environment distributed for connector with all sites:

  1. install ColdFusion11 on the other server.

  2. Once you install CF11, then copy the jar file "wsconfig.jar" from this location C:\ColdFusion11\cfusion\runtime\lib on the IIS server.

  3. configure IIS in the other server. You need to enable the following features at the IIS level only.

  ISAPI extensions

  ISAPI filters

  CGI

  ASP .NET

  5 ColdFusion11 server to connect to the Web server via the Port connector, which is located in the server.xml file. You can find this file in the C:\ColdFusion11\cfusion\runtime\conf, once you open the file server.xml, this is the port that you want.

  Example: -.

  6. Once you check everything in ColdFusion server, then return to the IIS Web server computer.

  7. the wsconfig.jar file which you copied in this server, rename the .jar to .zip file extension an excerpt it.

  [8. create a file with the same structure here magic C:\ColdFusion11\config\wsconfig\{Magic_Number}--[nombre would be 1, 2, 3... n]

  {9. now go to the extracted folder wsconfig and check this isapi_redirect.dll, copy the DLL to the folder C:\ColdFusion11\config\wsconfig\{Magic_Number}. If you have 32-bit 32-bit copy if you have 64-bit DLL and then copy 64 bit DLL.

  Location of the DLL in the extracted folder

  The 64-bit IIS DLL is located in connector\isapi\intel-win64\prebuilt\amd64\isapi_redirect.dll

  The 32-bit IIS DLL is in connector\isapi\intel-win\prebuilt\isapi_redirect.dll

  10. in the same folder of magic_number create a 'isapi_redirect.properties' file and copy this content. Now, the location and the magic_number might be different.

  extension_uri = /jakarta/isapi_redirect.dll

  Log_file = C:\ColdFusion11\config\wsconfig\1\isapi_redirect.log

  LOG_LEVEL = info

  worker_file = C:\ColdFusion11\config\wsconfig\1\workers.properties

  worker_mount_file = C:\ColdFusion11\config\wsconfig\1\uriworkermap.properties

  iis_buffer_enable = true

  ip_restriction_file = C:\ColdFusion11\config\wsconfig\1\iprestriction.properties

  AUTH_COMPLETE = 1

  11. create another file 'uriworkermap.properties' and copy the content slot

  / cfformgateway / * = cfusion

  / CFFormGateway / * = cfusion

  / flex2gateway / * = cfusion

  /flex2gateway = cfusion

  / cffileservlet / * = cfusion

  / CFFileServlet / * = cfusion

  / cfform-internal / * = cfusion

  / flashservices/gateway / * = cfusion

  / flex-internal / * = cfusion

  rest / / * = cfusion

  /*. CFML / * = cfusion

  /*. MXML = cfusion

  /*. As = cfusion

  *.cfm = cfusion

  /*. Ft3/min = cfusion

  /*. Ft3/min = cfusion

  / * .cfm / * = cfusion

  *.swc = cfusion

  /*. CFML = cfusion

  /*. CFML = cfusion

  /*. CFML = cfusion

  /*. CFC = cfusion

  /*. CFC = cfusion

  /*. CFC = cfusion

  / * .cfc / * = cfusion

  /*. CFR = cfusion

  *.cfswf = cfusion

  /*. SWS = cfusion

  *.jsp = cfusion

  *.hbmxml = cfusion

  12. create another file "workers.properties" and copy this content

  Worker.List = cfusion

  Worker.cfusion.type = ajp13

  Worker.cfusion.Host = localhost

  Worker.cfusion.port = 8014

  Worker.cfusion.max_reuse_connections = 250

  13. now go to a folder that is C:\ColdFusion11\config\wsconfig and copy the "cfwin32.dll". Location

  wsconfig\connectors\installers\intel-win\prebuilt\cfwin32.dll

  wsconfig\connectors\installers\intel-win64\prebuilt\cfwin32.dll

  14 create a file 'wsconfig.properties' and copy the sub content. Number of bits could be changes to 32 bit if you use the 32-bit environment, this file contains site information and the IIS connector. I created this article that you configure the connector with ALL IIS sites, so set below will work.

  1 = IIS, 0, true, "", bitness64 "

  1.SRV = localhost, cfusion

  15. now that we have created all the files and folders. We will add the IP address of the machine ColdFusion11 if IIS can communicate with CF11. There are 2 places to add the IP address.

  a. "workers.properties" file, where is written "localhost" replaced by the IP address and

  b. "wsconfig.properties" where is also said to replace localhost with the IP address of the machine ColdFusion11.

  16. now we must work on IIS services manager, then start the IIS Manager. We will make any changes to the IIS server and when we restart IIS, it inherits all the mappings Manager and filter ISAPI in all sites.

  17. click on the server and then click handler mapping. Add a script mapping and Add .cfm, .cfc, .cfml, .cfr, and .cfswf managers and then point it to this DLL. C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll.

  Click request restrictions, select Invoke and select the files and folders, and Ok. In the right pane, click Edit feature authorization select run.

  Example: Ask the path:-*.cfm

  Executable:-C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll

  Name:-cfmHandler

  NOTE: Add these Manager you will use not all add them.

  18. click on IIS server and select default Document and add index.cfm as default document.

  19. click on IIS server and select ISAPI and CGI Restriction, select Add and 'ISAPI and CGI path' 'C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll', Description "tomcat_All". Check Allow extension path to run and press Ok.

  Click on change the function parameter in the right panel and check both boxes.

  20. click on IIS server and select the ISAPI filters and add a filter name 'tomcat' and the executable file "C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll".

  21 now, add you a virtual directory to each site else it won't work. To add a directory virtual right click on your Web site and add a virtual directory. Alias name "jakarta" and the physical path "C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll" press Ok.

  Follow this step with the same Alias and path even to all Web sites.

  22 restart the IIS service, and run any ColdFusion page. It will work.

• use queries to support for different style sheets?

  I know that this question must be asked all the time, sorry :-).  I have been working on a site and you have great help here for 2 previous questions. But now, I came across another and more than probably the last issue for this site. The page that I write is for my group, many of our fans and everyone have ipads, anodroids and soon. So just to see, I tested my site and 800 x 600 (I know the Res gets much lower than for 320 phones is the norm and 1024 x 768 for the ipad, I think, but it is the lowest, I could go on my pc to test) and I already had problems with the top of the screen being cut into pieces and well sure left and right chopped. I read up on it and I find the media to call sheets css dfferent for different resolutions.  What is togo of this problem? Also when I wrote the page that I was in 1280 x 1024, I did, as I thought it was prob. the resolution more used at this point, it is the best resolution to create? So, in a nut shell, what is the best way to address the resolution and what resolution you create in? Thank you very much for the help past as well as help with this.

  John Dullebawn

  Media Queries would be the way to go for what you want to do.

  Keep in mind that just because this resolution may be the most widespread, it probably doesn't get used very often. Here's what I mean by that...

  I my experience, very few people find anything on the web with a maximized window (I honestly can't do to think of a time where I have never seen someone using a display full-screen browser where it wasn't an accident). Most don't allow their browser to use 80% or more of their real estate property screen because they need room to click back between browser windows or other programs or just to get on their desk to find files.

  The good thing with questions from the media, is that you need not worry about this because you can make one for 1280 x 1024 for the people who use the entire screen. Then an other for 1024 x 768 or 800 x 600 480 x 260, basically everything, and all the other resolutions you want to design for.

  It's really how precisely you want to got on the number of possibilities to you.

• support for different languages

  I'm a GUI and thought that would be a nice feature. See image: http://postimage.org/image/oqidh1c4/
  
  First I thought I'd do a class with a function like f: (concept, language)-> Word and then each class should inherit from the class, and send the concepts I love ('OK', 'English') and make 'Confirm', ('OK', 'Swedish') and get "Bekrafta", etc. And then each class would implement an abstract method of 'update all' of the class dictionary, if the user changes the language. (Sort of)!
  
  But then maybe this isn't a good idea, what happens if the classes extend other classes already? An interface is perhaps better? But then, if I were to add a language, the dictionary mapping would not be in on-site, but in every sense!
  
  What do you think? Is there another way? How this work usually?

  It is usually done with ResourceBundles, one for each language you want to support. The idea is pretty much the same thing, but there is much less inheritance and interfaces involved.

• Smartphones blackBerry Internet browser does not support the different ports of problem...

  I'm a computer programmer who needs access to certain IP addresses on my network from the outside.  He kick back for me: 8080 unsupported.  Clues as to why this is happening and y at - it a cure?

  Thank you

  Mike cope

  This document has got to be updated. Port 8080 is the port that I am connected. I opened the administration remotely on my router, which was on port 8080. I then tried to connect via my "BOLD". Note that WiFi was off. It connected properly.

  Note that I was not using https. Your using https? Maybe is the combination limited?

  I used 4.6.0.266 (451), in which case there might be a difference.

• The features of virtual machine that are not supported or disabled material...

  I get this error when I try to migrate virtual machines from one host to another.

  but some other virtual machines to migrate.

  What's wrong? I have
  

  and if the reason EVC mode I think that I can not migrating other virtual machines, am I right?

  

  Jokerciitaw thanks for the reply, but I can't understand if you're right... How can I migrate some other virtual machines?

• Different material SRM to the DR site

  Dear people,

  I need clarification on below point.

  We have servers (a few years) running on the DC vSphere site. Now, we are planning for recovery by using MRS. site. But we intend to place newer materials to DR. Does make any incompatibility with MRS? (to my knowledge not as it should be compatible with only vSphere). Please let me know if I'm wrong.

  Thank you and best regards,

  Hari.

  To compute (server) resources compatibility is no need because the VMS failover has cold start.

  Because SAN paintings his most complex issue and to keep the replication health models the table must satisfy certain requirements of compatibility. You should check the compatibility charts.

  In any case, you can use SRM with vsphere replication in order to avoid any restriction of compatibility.

• VSA on material different hosts in a cluster

  I installed VSA attemtped to VSA configuration for two hosts in a cluster with a different material and successfully. When I have case set up the ASB I couldn't add any of the hosts in the cluster. In the details, he says "guests shouldn't be in a cluster, hardware not supported." My question is...

  Should I remove the hosts in the cluster?

  VSA supports the hosts of different material?

  VSA can support my setup with a different configuration?

  I am new to VSA, so any help would be appreciated.

  Concerning

  Purpose of test, I missed more than one option you need to change in the dev.properties:

  EVC.config = false

  Turn off the host.audit allows you to select hosts even with unsupported hardware.

  This cannot be a permanent solution, because VSA configures an EVC cluster enabled as part of the workflow installation and vCenter Server does not add a host from a different family of the seller/CPU in a VCA active cluster.

• Failure of the motorway E - there are network connectivity problems or this peer has different support encryption (AES / non - AES software)

  I have two websites and a cluster CPU as below:

  site - 1

  CUCM pub-1

  Pub 1 CUC

  imppub

  exp-c-1

  exp-e-1

  site-2

  cucm2

  CuC2

  IMP2

  exp-c-2

  exp-e-2

  !

  I do a bunch of highway E and C, but it I show error on cluster of highway E:

  Failure - there are network connectivity problems, or this peer has the support of different encryption (AES / non - AES software)

  This highway is part of a cluster, but is not the master of the configuration. Configuration changes made on this highway may be lost. More information about the Clustering help page.

  !

  What is the solution to fix it?

  Locally add cluster of highway or having to make cluster of 4 motorway between locations?

  How far are the peers of the highway on the other, what is the round trip time?  This should be within 30ms.

  Can you confirm that all highways in the cluster have the same keys option installed on all peers, as it is a requirement, call license quantities can be different, but the features option enable/disable keys must be the same.  Additionally, make sure that the version of the software installed is the same, that you have a version mismatch or could be active where encryption the other not.

  Regarding the "this highway is part of a cluster, but is not the master of the configuration... '. "this message is normal for a node that is not the master, as it is said just only make changes on the master, since all changes on the slave will be replaced by the master.

  Suggest you watch on creation of Cluster Expressway and maintenance Deployment Guide (X8.8) in case you have not yet.