Support of Symantec Endpoint Protection tool gives the error of strage on userinit vs Userinit

Similar Questions

• Removal of Symantec Endpoint Protection of computer

  I tried to take the Symantec Endpoint out of my computer because when I go to open a program file the Symantec starts processing and crashes my computer.  I tried simply remove it and disconnected from the hardware store and it wont let me delete it. Yet once, it freezes just my computer. Any suggestions would be greatly appreciated. It's keeping me working. Thank you.

  Hi MeikaDomino,
   
  Uninstall Symantec Endpoint Protection by following the steps in the article below:
   
  How do to manually uninstall Symantec Endpoint Protection in Windows 2000, XP and 2003 client, Editions 32-bit
   
  Additional reference on:
  How to uninstall Symantec Endpoint Protection (SEP) the client in silent mode using the command line

• Windows vista x 64 with symantec endpoint protection security alerts

  I have Symantec Endpoint Protection installed on my computer and my Windows Firewall is disabled.

  In Windows Securty Center, heading Protection against malware, there is a yellow warning: check the settings - not Compatible; the following message is also present: Symantec Endpoint Protection is on but its Windows Security Center status statement in a format that is no longer supported. Use the feature of automatic update of the program.

  My Symantec product is up to date with the automatic update feature is enabled.

  Windows Security Center also displays a red warning in the firewall section. Why isn't Vista automatically detect the Symantec Firewall or Antivirus? Is there a way to use my Windows security alerts silmutaneously program Symantec?

  You can find the SNA you problem here...
  http://www.Symantec.com/connect/forums/Sep-11-Windows-Security-Center-reporting-format-no-longer-supported

• How can I temporarily disable Symantec Endpoint Protection?

  I need to temporarily disable the software assets (SEP) to use ComboFix to remove my Scour.com redirect virus on my search engine.

  Found this. As I don't have the software, I can't guarantee the effectiveness of the instructions. But, give it a try and see if it works.

  http://www.ehow.com/how_6914698_disable-Symantec-Endpoint-Protection.html

• Impossible to uninstall Symantec Endpoint Protection after system restore

  Hello
  a program has been uninstalled (Symantec Endpoint Protection)
  After have rebooted and still have problems to install a newer version, I decided to do a system
  Restore prematurely, I uninstalled the original version.
  (Since I couldn't find the installation files or my license info)

  The old version worked again.  Now I am able to start the
  new version, the old version will not uninstall.

  It just sits there in a small box with a bar saying Windows of progression
  in the configuration of Symantec Endpoint Protection and it remains as it
  for as long as I left, at least 25 minutes.

  I thought that the system restore would put things back exactly as they
  have been, but it's apparently not the case.

  OT: Impossible to uninstall after system restore

  Any ideas on that?
  The OS is Windows 7 Pro 64 bit 64-bit.
  I found this, but have not yet tried.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  I was able to cirumvent the problem by a selective startup in Msconfig.

  I disabled all startup items, all services not MS, restarted and then uninstalled

  successfully.  However, I met another strange problem.

  After uninstalling old version, I rebooted (the system was still selective

  startp) I put a new restore point and installed the new version successfully.

  Later, realizing msconfig has been arrived at "selective", I went and

  has tried to return to Normal startup.  However, when you select normal

  and hit 'apply', it immediately jumps to selective.  I have never seen it before.

  I didn't know how to solve.

  Instead, I uninstalled the new version of the AV program, jumped to the restore point

  I did before I installed, rebooted, open Msconfig and have been correctly set up

  In normal mode.  Then reinstalled the AV.

  Everything is OK now.

  You ever heard of this problem of msconfig before?

• Symantec Endpoint Protection 12.1 and Peopletools 8.53

  Hello

  We are currently allowing scanning of virus for PT 8.53 with v12 of Symantec Endpoint Protection (SEP). However, we are unable to set it up properly. Our implementation looks like this:

  * PS webserver is insatalled on server 1, is where configure us the virusscan.xml file

  * 12 SEP is installed on a separate server, Server 2. client and MS manager is installed on this server.

  * Operating system is Windows 2008 R2 64-bit for both servers.

  May I ask if anyone here have successfully used MS for the scanning of attachments?

  Unfortunately, by oracle, only symantec scan engine has been certified to work with peoplesoft, other versions are not tested yet to work.

  Another question, what should be the value for the virusscan.xml below parameters?

  <>provider
  < name > SymantecManagementClient < / name >
  psft.PT8.VirusScan.provider.GenericVirusScanProviderImpl < class > < / class >
  < icapversion > PICA/1.0 < / icapversion >
  < service name >-/ SmcService < / service-name >
  < policycommand >? action = SCAN < / policycommand >
  Server2 < address > < / address >
  < port > 8014 < / port >
  false < disable > < / disable >

  < / provider >

  We have mixed and matched the names of service available from Server 2, but we always receive the below error:

  10 sep 2013 23:14:19 psft.pt8.virusscan.ICAPClient connectAndCheckOptions
  INFO: Entry OPTIONS header OPTIONS icap://server2:8014 = / SmcService ICAP/1.0

  
  10 sep 2013 23:14:19 psft.pt8.virusscan.ICAPClient connectAndCheckOptions
  NEWS: Receive OPTIONS header = HTTP/1.1 200 OK
  Date: Mon, 10 Sep 2013 15:14:19 GMT
  Server: Apache
  Allow: GET, HEAD, POST, OPTIONS
  Content-Length: 0
  Connection: close
  Content-Type: text/plain

  Header of PICA = 200 ICAP/1.0
  10 sep 2013 23:14:19 psft.pt8.virusscan.ICAPClient scanStream
  GRAVE: Unable to connect to the analysis server SymantecManagementClient; Reason = CONNECTERROR
  10 sep 2013 23:14:19 psft.pt8.virusscan.VirusScanProviderManager scanStream
  INFO: Scanning is finished by using provider = SymantecManagementClient classname = psft.pt8.virusscan.provider.GenericVirusScanProviderImpl provider

  10 sep 2013 23:14:19 psft.pt8.virusscan.VirusScanProviderManager scanStream
  INFO: Finishing application for scanning.

  8014 port is the port of the client for MS communication and it is the only port that gives us an answer (INFO: receive OPTIONS header = HTTP/1.1 200 OK...) (etc.), when we try other ports, we get a "SERIOUS: unable to connect to SymantecManagementClient" message on this line.

  
  Hoping for your answers, thank you in adance for your help.

  Hello

  Just to give you an update. We were able to do this work, but we used Symantec motor Protection for the Cloud Services instead. In addition, for anyone having problems with the parameters-, we used the same exact settings in Peoplebooks or on the file virusscan.xml provided, just update the IP address. Save the xml file on the Portal.war and the PSIGW.war directories.

• Cannot remove 11.0.6005..562 version of Symantec Endpoint Protection of Windows 7.

  I can't download Windows 10 without removing Symantec Endpoint protection 11 version. I tried several methods without success. WJR

  Remember to perform a clean boot:

  http://support.Microsoft.com/kb/929135

  also, go into C:\Program Files and C:\Program Files (x 86) If you have a 64 bit version of Windows 7 installed, remove all records associated with Symantec and then try upgrading again.

  Review for manual removal instructions:

  • Symantec Endpoint Protection 11 client - Windows Vista, Windows 7 and Windows 2008 (32-bit)
  • Symantec Endpoint Protection 11 client - Windows Vista, Windows 7 and Windows 2008 R2 (64-bit)

• AppAssure replication - Symantec Endpoint Protection

  Hello

  My company is currently just getting started with AppAsssure, we are on the latest version of 5.4.3.106. We have base and incremental images going and its been a lot of work. This week, we are putting in place a replica "off-site" server when we started to notice the size of our recovery points. They are all between 1-3 + GB every night, its looked at as this has been the case since the implementation, but we didn't pay much attention to size here since it's local past. We are now concerned because we have 20 + servers that must replicate to the amount of bandwidth replication night will take and possible the strain on our network.

  In recent two nights that we ran Diskpulse to see the changes that are occurring on servers that are the cause of being so high, it seems that Symantec EndPoint Protection is a BIG culprit, but also a windows journal file called dism.log. Anyone have any suggestions on changes we can make to APpassure, Symantec or hat Windows would contribute to decrease the amount of changes that are made to help with the size of our incremental backups?

  Thanks in advance.

  -daniel

  Hey absolute-J,

  Dell-AppAssure Source Core replicant only unique data that has failed in the Dell-AppAssure main target Dedup Cache. Before sending a part of carrots data to verify check funds records should be released and already presented in the Cache of Dedup target. If in the cache of dedup target record already exists with the same checksum as Source Core attempts to send this record is not sent and he'll be strucure.

  Thank you

  Anton Kolomiiets.

• Vista - Windows Update fails and defender gives the error code: 0 x 80080005

  Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.

  I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.

  Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I've got an important update that I can't install it because the continuous computer give the error 80070666

  I'm the only user on my computer and so I should have all the priveliges needed to install the update, but it still gives the error =)

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. If the Office 2003 SP3 still fails to install, see...

  Description of the update for Office 2003 (December 9, 2008)
  [Download/install manually, if necessary & not already installed)
  http://support.Microsoft.com/kb/949074

  You can not install a service pack for Office 2003
  http://support.Microsoft.com/kb/884298

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Alpine Ski 2007 gives the error "ERROR in LOADING X 64 DRIVER. YOU FORGOT TO RESTART? »

  Alpine Ski 2007 gives the error "ERROR in LOADING X 64 DRIVER. YOU FORGOT TO RESTART? "I have restart after the installation of the program on Windows 7 for a Dell PC. The demo version has worked on this computer, but after buying the DVD, it doesn't. I tried all the switches compatibility under properties, but nothing works. Thanks for any help.

  Hello SQUARKMAN,

  I did a little research, trying to determine the compatibility with Windows 7. It doesn't seem to be compatible, since its last update compatible with Windows 2000/XP shows.

  You could try running in compatibility mode, or if you have the XP mode, you can try to run in there also determine if you have better success.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I try to connect to the internet, it gives the error message 651 windows 7

  Original title - windows 7 651 error

  I recently installed windows 7 and I use a broadband connection... Whenever I try to connect to the internet, it gives the error message 651 while I had no problem with this broadband connection in windows 8.1... How to fix this error, please help me...

  Hi Alexandra,.

  Please contact Microsoft Community.

  • You use a wired connection or wireless?

  Method 1: I suggest you use the resolution of the problems of the article below Internet connection and check if it helps.

  In Windows network connection issues

  https://support.Microsoft.com/en-us/KB/313242

  Method 2: Try disabling your antivirus software and then try to connect again and check if the problem persists or not.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

   

• I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message

  I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message "" an error occurred while the wizard attempted to set the password for this user account". I can't pass this screen and am virtually blocked the computer phone iam trying to access. What can I do? It comes to Windowns 7 Home Premium

  This probably means that your password disk drive is not up-to-date. Here are the other options built into Windows to help you get out of this situation:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• Acrobat will not open and give the error 312.11 error message

  How can I open professional acrobat when he said: there was a problem with licensing and it gives the error message 213,11? I bought and paid for this software and using it for a few years.

  Hello

  This mainly happens when the SLStore to the C:\ProgramData\Adobe folder does not have permission to create a file. Need write access to this folder to the first launch. Please follow the steps outlined in the Article below:

  Error 213:19 | Problem is the license of this product. Acrobat X and XI

  Let me know if that solves the problem.

• Symantec Endpoint Protection on Horizon view 6.0 Clone related with Persona management, message 'do not save profile '.

  Some users receive the error their character has no backup. KB 2019247 doesn't seem to be the problem. In the journal of VMWVvp.txt, there are repeated lines of this:

  [593708] [17/12/2015 09:12:35:0793] [RTOLogon! PreDC] recovered standardszed file name Info: process: ccSvcHst.exe, leader: \Device\HarddiskVolume2

  
  

  It is perhaps part of the problem? Flags of Persona logging and Debug are on. Within 3 hours, a VMWVvp.txt sessions had up to 300 MB. With the GPO management Persona, we have already excluded the ccSvcHst.exe process and we used the vietool to mark all existing files on the image of the mother as own.

  Any ideas what the problem might be? What should look us in the newspaper?

  However, profiles seems to be intact from one day to the other.

  The error code you see (0xD0000022) means: {Access Denied} a process has requested access to an object, but did not have the access rights.

  It may be a different problem with threads, as you pointed out.

  Is it possible to test yourself using 6.2.1 agent to see the problem persists?

  We have fixed questions on creating/deleting massive operation by browser and e-mail on this version client.

  Thank you.