SWF file works but no html when preview and publish

Similar Questions

• I cann't open exe file when I open always open with adobe reader.when I uninstall adobe reader my exe file work but I still need adobe for my pc

  I cann't open exe file when I open always open with adobe reader.when I uninstall adobe reader my exe file work but I still need adobe for my pc.

  Hello

  read this and see if this solves your problem

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• Colors seem to be desaturated when previewing and working on images in photoshop. Screen also flickering when using tools. Help

  Colors seem to be desaturated when previewing and working on images in photoshop. Screen also flickering when using tools. Help

  For color related issues. Make sure that your monitor is color calibrated.

  Also disable camera raw 'use of the graphics processor.

  Go in Edition > Preferences > Camera Raw

  

  How can I check if my graphics driver is up to date

  Please see how: install and update drivers in Windows 10 - Microsoft Community

  What happens when you switch to the mode Basic Drawing in Photoshop

  Go in Edition > Preferences > Performance > advanced settings and setting mode "drawing" at the base

  

  Concerning

  ~ Assani

• Muse crashes when previewing or publishing site. TextFlow question?

  Muse crashes when previewing or publishing site and following error - Textflow incompatible a number of children through breakpoints in textframe U3782. Someone knows how to fix this? Thank you

  

  Hi j9Lazur,

  Glad that you were able to determine what text frame, it has been. We have not yet isolated the source of the bug, but in the next update (due soon), some information about the offending text block (title page and a short excerpt from the content) will be saved in the MuseLog.txt file (located in your Documents folder).

  Thank you

  Abhishek

• looking answer why only the background image is visiable in preview and publish

  looking answer why only the background image is visiable in preview and publish

  

  design                                                                                                                                                                           publish

  What is this code above the head? Appear to interfere with the rest of the code below.

  

• TextBox displaying text xml in the file work but now when loaded into another SWF

  Hi all

  I have uploaded a gallery of xml (as2) that we needed one for an old as2 file. Now I use especially as3, but thought that I only needed to tweak would no probs. Of course, it rarely works that way. The problem, it is loaded from the XML text is displayed with the corresponding picture. It works fine in the file. When I load the SWF in another SWF however, everything works EXCEPT the text does not at all appear? Whoever made the Gallery used "device fonts" in the text box, I don't know if this has anything to do with it. I tried to change the dynamics and embed text box, but still nothing.

  It seems the essential line-

  _root.descmc.DESC.htmlText = XMLdaten [number];

  I also tried

  _root.descmc.DESC.htmlText = XMLdaten [number] .firstChild;

  It locates the correct when tested XML so it's to find correct.

  Any help would be appreciated.

  Thank you

  The problem is perhaps in the use of the "_root", you probably need to set _lockroot = true; in the swf file loaded, otherwise the _root is the loading swf, not the loaded file.

• Objects with delayed timing do not appear when I preview and publish

  I am using Captivate 5, student edition.

  When I add an object (text caption, button) and I put 'see appear after seconds _' the object do not appear when I saw my project or when I publish it. Thus, for example, I bulleted, each element of his own text caption, and I each a figure as he is mentioned in the audio. When I saw the individual slide using the playback on the timeline feature, I see everything works well and properly timed, and objects not to appear.  I wonder if there is something in preferences or elsewhere that is not activated.  At the top of the preferences for the object, it shows visible only verified.  The objects are not hidden on the timeline.  I also tried to arrange the objects to "bring to front," I check everywhere, the objects are visible and not hidden, but as I said, when editing or previewing, they do not work as seen in the preview window.  Let me know what questions you have for me.  Sorry, I couldn't get my computer to cooperate and get a good screenshot

  Thank you

  Just re-read and saw the little computer did not cooperate. Bad luck that.

  In general, check out the timeline to buttons, click boxes, or text entry boxes. Each of them is paused the slide. The break point is indicated as shown below:

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Symbols disappear in the preview and publish

  I'm completely new onboard so user error is not unlikely, but I have a small animation with 11 small circles that animate the opacity and Y pos. The circles are all symbols and are controlled (play/stop) on the main timeline. When I saw it, half of them do not appear. Symbols that are not are compatible a preview in the preview. I looked at the items in the browser and they are there, they are not simply animate.

  So I thought that I have would re-create just 'bad' symbols and their animations, but they are still not animating in my preview. When I play the timeline in edge animate evrything is fine.

  I tried it in Chrome, Safari, and Firefox (all latest versions) with the same result.

  Is there a bug symbol on board?

  Is there a method of creating symbols that I should use (others that draw, cmd - Y and change the symbol timeline)?

  All the ideas, because I'm out of them.

  You have added a trigger on the main timeline to 750ms to goto and play 1000 ms. As a result, all the bubbles that begin play between 750ms and 1000ms will not play. Remove the trigger to the 750ms, you will see all the bubbles

  Triggers code will not run in Animate yow will see bubbles but is executed when played on browser

• Can I have play a .swf file in a viewer window when clicking on link?

  Hello

  I have a thumbnail on my page that I would like to make a link to a video. However, I'm not on it to open it in a new tab or a window, instead, I would just like it to appear as a lightbox display, fading background and playing the video in the same page. The viewer must be able to close or click outside the video at any time to return to the original page.

  Is there a way to do this?

  Thank you!

  Put a file (Ctrl + D) .swf in a Lightbox widget Composition view should not be a problem with your thumbnail image in the trigger.

  The article here can be useful - http://www.adobekb.com/building_your_first_website_pt2.html#building02-addingalightbox

  Thank you

  Vinayak

• View heavy client work - but the HTML is not - using security server

  However, I better start a new thread after the marathon to get the heavy customer talk via security DMZ server... everything works fine now.

  I am now test HTML experience via the same security server... and get quite like I was getting with the thick client.  I cross any authentication, it says connection to the office and that's it.  Later says that the server has taken too long to respond.

  I now have a complete list of the rules of the firewall in any way.

  Clearly port 8443 is open from the Internet to the DMZ security server.

  I checked the rules and scanned, and apparently they let all ports open between the DMZ and internal both directions in our network...   I checked and 22443 is open on the desktop...

  Can someone tell me what I should look for the next please?

  Thank you

  Bill

  Make sure you go through all the steps exactly - config http://www.vmware.com/pdf/horizon-view/horizon-view-html-access-document.pdf

• I bought this and downloaded but it disappears when installing and just used to install at all! help I need for my course and need the work done ASAP!

  When I click to install it starts but within a few seconds it just closes and do anything I clicked on it again and same thing, it's ridiculous since just paid money for her iv

  The Adobe ID as part of the Forum is not no matter what CC placed under it, please let us know how you bought. You can cancel online only when you purchase online through the Adobe Store.

  Concerning

  Baudier

• DVD/CD player still works, but it won't open and close button on the PC! Any help out there?

  For some reason, a few months back, my Player DVD/CD writer decided it would not open or close more but it still works as usual when a disc is in, and it will be ejected when I go to the icon on the desktop, as well, but as there is no close button, it closes. I checked the disc and the info about it by going to 'start' and 'computer' and all that, and he says it works fine and the driver is fine, but is obviously not a reason any. It is an Atapi DVD A DH16AASH ATA device and it is a burner. I was going to download the so-called ErrorsFixer.com/Microsoft, but felt a little uncomfortable because I am always wary of download anything really. Someone at - it gives a few tips?

  Either said by the way, not at all important, how to change your password on your Microsoft account?

  The reader can be closed by pushing gently on the status bar. Once started, the tray retracts completely.

  If the player is behind a cover - the front hidden - it has probably moved slightly so that the external button is no longer comes into contact with the button on the front of the drive. If so, you must remove the covers on the side of the box and adjust the position of the car until the buttons respond and operate properly.
  If the button on the drive itself no longer works, you can either go as you are, or replace the disc. It is not economical to repair a DVD player.

• My project of Adobe Edge blocking when previewed or published browsers

  Hi, I have a moderately important in EA project which seems perfectly well in EA, but when he introduced in preview it blocks the browser.

  Chrome developer tools show the elements appear to be loading ok but there is a "Javascript error in the handler! Type of event = chronology"(in edge.5.0.1.min.js:154)

  I'm under edge Animate CC 2014.1.1

  Others team opposed using environmental assessment for this project, but I've been an advocate for it. The project has a hard deadline of this Saturday. Any quick help would be greatly appreciated.

  The content is exclusive, but I can share with the developers.

  Thank you.

  -James

  System:

  OS X 10.9.5

  EA 2014.1.1

  Apple MacBook Pro 15 inch Retina end of 2013 to 2.6 GHz i7 16 GB

  NVIDIA GeForce GT 750M 2048MB

  Well, I don't really have a clear solution. I started a process of cleavage rule where I deleted half of my items and retried until I managed to narrow it down to one specific thing. Then I found that simply removing a single javascript command on a chassis mounting elements a (sym.play(1000) ();), the problem has been solved. Weird huh? Thanks again for you help.

• Captivate 5 - screens will not advance preview and publish

  Hello

  I just started using Captivate 5 and I'm working on courses that are on a mobile software application, so I'm capture screenshots in a small size and you want to resize the project to a larger size, if I can put other content on the slide. After the record screen captures, I went in to change... Resize the project. I leave the Aspect Ratio to maintain controlled and choose the size of 790 x 545 preset. I click on the project to keep the same size and position in the project and leave the draft Position at the Center and click Finish. When I go to see a preview of the course, most screens will be in the correct position, but some of the screens are in the upper left of the screen, while the mouse movements remain in the correct position on the blade and the previous slide shows also in the center of the screen. Very frustrating! Can someone give me some ideas? I need to create 11 of these courses, and it is a major obstacle.

  If this feature does not someone has other workaround solutions?

  Thank you

  Tracy

  Hello

  Have you installed the fix published recently? One of the issues it resolved concerns scaling. He will be pushed any time, but you can already install it.  You will find information in this announcement of the Captivate blog:

  On the next patch...

  Lilybiri