swipe right Apple Watch

Similar Questions

• right arm Apple Watch

  Hey everybody

  I watched the keynote of today and was really impressed with the new watchOS.

  now I have considered buying one, I was wondering if there are watches of apple

  I could wear on my right wrist, because I'm left-handed. This is why I don't like

  my watch switch around when I'm drawing / works in my studio.

  Hello

  Apple Watch can be worn on each wrist with the settings depending on the orientation. (Apple does not separate models to wear left / right).

  More information:

  https://help.Apple.com/watch/#/apd0bf18f46b

• Apple Watch does not connect to the iPhone 6

  After updating my iPhone to IOS 9.3.3 6 all my bluetooth devices registered were gone including my Apple Watch. Now, it appears under "other devices" so I can't connect it. I already started my bluetooth and off and reset my iPhone but nothing worked. Any suggestions? Thank you.

  Hello

  Your watch is not supposed to be listed under "Other devices" on your iPhone (settings > Bluetooth), but it should be included in the section "my devices".

  To check the connection status of your watch to your iPhone, go to the eye of settings on your watch:

  • When you view the time on your watch dial, slide up from the bottom edge of the screen, then swipe left / right until you find the glance of parameters. This will specify connected or disconnected:
    • Connected and a symbol of green phone in the upper right shows that the watch is connected to your iPhone via Bluetooth.
    • Connected and a green cloud symbol indicates that your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • Disconnected shows that your watch is disconnected from your iPhone and is not connected to a Wi - Fi network. The symbol in the upper right corner will be a red telephone with a line through it. The same symbol will also see the top of the watch face.
  • Slide down again to return to the watch face.

• I lost the symbol of heart rate on my Apple Watch.  How can I get it back?

  I lost the symbol of heart rate on my Apple Watch.  How can I get that back?

  Hello

  To check your current heart rate on your watch:

  • Use the look of Pulse: when you view the time on your watch, slide up on the screen, then swipe left / right until you find the look of heartbeat. Swipe down on the screen to exit.
  • Siri to check your heart rate to say: ' Hey Siri, check my heart rate "(press the digital Crown once to exit).

  More information:

  Measure your heart rate with your Apple Watch - Apple Support

• Apple Watch Wifi connection

  I recently bought a Apple Watch sport and noticed that it does not connect to my home network. Can someone help me to try to connect to the network?

  I have at & t and Motorola NVG589 router, I believe that it is compatible with the Apple Watch.

  Hello

  Apple Watch can connect to a Wi - Fi network if the network is 802.11b/g/n 2.4 GHz and your iPhone, while being connected to your watch with Bluetooth has connected to the network before. If your iPhone is not in the scope of Bluetooth compatible Wi - Fi is available for free, your Apple Watch uses Wi - Fi.

  If you encounter any problems with your watch connect this way, try the following steps:

  • Before you begin, make sure that you made a note of:
    • Name of your Wi - Fi network.
    • The type of encryption it uses;
    • Your Wi - Fi password.
  • With your iPhone connected to the Wi - Fi network and with your watch near and connected to your iPhone via Bluetooth:
    • On your iPhone, go to: settings > Wi - Fi.
    • Press the 'i' icon on the right side of entrance to your current Wi - Fi connection;
    • On the next screen, click on forget this network - leave a few moments;
    • Then, with a short break between the two, disable and re-enable the Wi - Fi using the toggle at the top of Wi - Fi free.
  • Reconnect your iPhone to the network 2.4 GHz Wi - Fi.
    • If you have a hidden network (ie the network name / SSID is not broadcast), choose Add to the network with 'The other', then enter the name of the network, the encryption type, and password.
  • After that your iPhone has reconnected, leave a little time to get the information to share your watch.
  • Test your watch by placing your iPhone in Airplane Mode (via central control or via settings > airplane Mode).
    • On your watch, slide up on the dial of the watch, then swipe left / right until you find the look of parameters;
    • This should say connected, and display a green cloud icon to indicate that it is connected to the Wi - Fi;
    • Slide down again to return to the watch face.
  • Take your iPhone out of airplane Mode when you are finished.

  Note that, if your iPhone connection is possible via Bluetooth, it will always be used by your watch rather than connecting to a known Wi - Fi network.

• Is there a Wifi antenna Apple Watch?

  Sometimes when I disconnect my iPhone but I am close to my Wifi connection, I find that it doesn't have me say that my iPhone disconnected the connection with it.

  I found a green word 'Connected' with a cloud just beside sign in green as well, like the iCloud logo, you know what I mean?

  But when I go out and get out of my Wifi connection and try to disconnect the iPhone from the watch, he just says "Disconnected" in red.

  So I just want to know if it connects to the Wifi in itself or not because if so, it must of course has a Wifi antenna inside right?

  Hello

  Apple Watch supports Wi - Fi and Bluetooth connectivity.

  To check the status of the connection of your watch, open the eyes of settings: when you view the time on your watch, slide up on the screen, then swipe left / right until you find the glance of parameters. This will specify connected or disconnected.

  -Connected and a green phone symbol means that your watch is connected to your iPhone via Bluetooth.

  -Connected and a green cloud symbol means that your watch is disconnected from your iPhone via Bluetooth, but (as a relief, when connecting your iPhone Bluetooth is not available) is plugged into a known Wi - Fi network.

  -Disconnected and a red telephone with a line through it means that your watch is disconnected from your iPhone and it is not connected Wi - Fi.

  -Slide down again to return to the watch face.

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• How can I change kilojoules to calories on my Apple Watch?

  How can I change my Apple Watch of kilojoules to calories?

  Hi Jen

  On your watch, open workout app and select this option to start a race in the open air.

  When the goal screen, swipe left / right to the goal of kilojoules. Force press on this screen, then choose calories.

  Output of the training app (go back one screen by pressing Cancel, then press the digital Crown).

  The activity app now shows the calories (and calories will be used also for future training in the application of the workout).

• Apple pays on Apple Watch does not

  Hello world!

  I'm a big fan of Apple pay, I use it anywhere that accepts it.

  A feature, I can't wait to try it immediately when I got my Apple Watch (24 hours ago only) was paying Apple.

  In the first hour of me set up my watch, I went to McDonald's to get a Coke (it's the closet place who agrees to pay Apple), so I could test Apple pay.

  When I put my watch next to the drive, nothing happened. The screen remained black all the time. To complete the transaction, I pulled out my phone and also, which didn't work. I used pay Apple on my iPhone, several times the same McDonald's before and it's always worked flawlessly.

  A few hours later, I had went to Best Buy to buy wireless headphones and once more tried to use Apple pay on my watch for the purchase. But unfortunately, nothing happened here either. The watch remained black all the time.

  While I was trying to make it work, I noticed my iPhone wake up (he was placed flat on the counter) and displays the message - "Hold iPhone close reader" (I forgot the "exact" wording). When I gave up on the Apple Watch, I took my phone to purchase and it worked perfectly.

  Now, whenever I have install my credit card on the iPhone, I have to check (via a SMS of BofA code). When I looked at the settings in the Apple Watch app on my iPhone - I saw my already credit card. I clicked on the button 'Add' next to her, that I then invited to add security code 3 digit number to check. Once I did, my credit card was placed under the header indicating that it is an active card on the watch. And a few seconds, I had received a notification on the watch let me know it was ready for use.

  I guess it is setup correctly, which miss me so much? Are there any ideas as to why my Apple Watch does nothing?

  Sorry to ramble on and on. I wanted to give you all the details in the hope that maybe someone can point me in the right direction to solve this issue.

  Thank you in advance for your help!

  -Jason

  Hi Jason

  In order to pay using Apple pay on your watch, you must first quickly double - press the side button.

  It will then display your default map. If you have added other cards and you want to use one of them instead, swipe to switch between maps. With your favorite card displayed, hold your watch up to the Terminal:

  -The dial of the watch must be faced with and parallel to the screen of the own terminal (you shouldn't be able to see the face of the watch and pay), aligned in the Center with the logo without contact on the terminal screen and held less than 10cm.

  -It must be blocked in this position for up to a few seconds, until you hear the confirmation beep and the pulse haptic.

  More information: defining and using the Apple pay with your Apple Watch - Apple Support

• Apple Watch series 2 protective case

  Hello

  Has anyone found a real Apple Watch S2 case? You are looking for a minimalist design, to display the watch itself without inhibiting its look, then perhaps a clear case (case bumper or other) will do.

  All cases online specify that they are cases Apple Watch S2, but look further into what they are not, as many of them do not account for the new air port (hole on one side, not two) and are also not the right depth, and cutting a port speakers are designed for S1 S2 not.

  You will need to protect my camera, I do use it in the gym a fair bit and worry about the damage.

  Thanks guys and girls!

  Hi RudeBwoy!

  I had the same problem. As far as I can see, case or bumper for the AW 2 series do not exist. I talked to Spigen, catalyst and a couple of others and any sites third 3rd say... manufacturers confirm that their AW products are NOT compatible with series 2 Watch, and that they are working on it!

  All thoughts of good screen protectors? !! They would be compatible? Some protection is better than nothing!

  Let me know if you hear anything!

  Thank you

• 2 Apple Watch water lock on when running

  Question: Is the 'blocking of water,"the only option"lock"now in workouts on Apple Watch 2?

  When I run and use that as the '' restructuring '' selected, I want to "lock" my watch, so if I hit it, it not disturbed.  With the new Apple Watch 2, option 'lock' is now the 'blocking of the water", so when I unlock it, it makes the sound as to empty all the water. Where as with Apple Watch 1, you have the normal locking option.

  Thank you!

  "Avoid bycatches. If the exercise you do or equipment you wear causes accidental taps on Apple Watch, lock the screen if your training record is not interrupted. Glisser slide to the right, then press the lock. To unlock the screen, turn the digital Crown. »

  Apple Watch 2, when you drag to the right, the lock with the lock icon option is there, just the drop of water, put it in the water not lock mode.

  Hello

  The water lock icon is certainly what is shown during a training run in the open air, place the padlock icon that is indicated by Apple in the supporting documentation for the application of the training session:

  • Work with your Apple Watch - Apple Support

  You may want to Apple did know out:

  • https://www.Apple.com/feedback/watch.html

• My second Apple Watch I have couple as new or a back

  the right way to set up my second Apple Watch, nine or a back What's up?

  I use two of them.

  a Apple Watch is the first generation, and the second is 2nd generation.

  Hello

  You can configure as new or restore from a backup of your first watch, if you do not want to continue with the same settings.

  Follow the steps here:

  Use more than one Apple Watch with your iPhone - Apple Support

• Unable to pair re Apple Watch 1st gen

  Hi guys,.

  I have a first gen 38 mm Apple Watch alu and 6s with 9.3.1 iPhone. Until now they work very well together, but Sunday I reset the watch and since then one can not re pairit with the phone.

  Once I chose the language on the watch, it gives me the pair with phone dialog box, I start the app on phone, scanner watch, everything is ok, but after that, it gives me the check window of the software, where it says "watch OS 1.0, your software is up-to-date. And that's all. I can't go on, keep it right on this window.

  I tried to restart both the watch and the iPhone, reset countless times the watch, I even tried with another phone, same result.

  Any ideas guys?

  THX

  You must update to WOS 3? then update your IOS 10 phone. And repair devices

• How to migrate to new hardware Apple Watch

  Probably tomorrow, I will receive my new Apple Watch series 2.

  HE writes off my Apple Watch of 2015.

  Is there anything special to consider when you install the new Apple Watch?

  I want to keep all the activity data and the rewards I have earned my original watch.

  I could assume that the process is straughtforward: just match the new AW with my iPhone and désapparier the old shows to-be-removed. Right?

  Popular best practices.

  Hello

  Cancel the twinning of your watch to your iPhone using the app shows, including enter your Apple ID password if you are prompted to remove the lock of Activation of the Watch:

  • Cancel the twinning of your iPhone - Apple and Apple Watch Support

  You can then restore your new watch from the old backup that is made automatically during the pairing process:

  • Set up your Apple Watch - Apple Support

  All historical activity data (there included achievements earned) to the point where désapparier you your old watch is stored on your iPhone, not on the watch, then he will be retained.

  More information:

  On the lock of Activation on your Apple Watch - Apple Support

  https://help.Apple.com/watch/#/apdd3f9d7bc6

• Automatic unlocking with Apple Watch active but expire

  I've activated automatic unlocking on my Mac (Macbook Air 6.1) successfully, I had my first gen Apple Watch upgraded to watch OS 3 and when I opened my Macbook, it says «Unlock with Apple Watch...» ». After a few seconds, however, I get a spinny wheel thought and then it expires and I get the password prompt. I tried to restart my Mac and my watch, but don't know what else to do here?

  As far as I know I have everything set up properly - 2-factor authentication, the right operating system, the hardware supports, but it just times out. Anyone have any idea why this could be or a potential solution?

  Seems that you have all your ducks in a row, but check the instructions here > http://www.cultofmac.com/441405/how-to-use-apple-watch-to-unlock-your-mac-in-mac os-sierra /

• Allow your Apple Watch unlock your Mac - box missing

  Hello

  Yes, all my devices running the latest OS - watchOS 3, iOS10, macOS Sierra (iPhone 7, iPad mini 4, MacBook Pro 12.1, Apple Watch) all signed the same iCloud, 2 authentication account activated - so everything according to the instructions.

  Interestingly, the box was causing it (under privacy and security on the Mac), it was when I had still activated authentication step 2, but once I disabled that & activated authentication factor 2 - the box disappeared and never came back.

  Yes, I disconnected icloud on Mac, & into the new.

  Off hand is also activated.

  I spent all morning on this, it is now, I want lessee a string of expletives.

  Can someone help me get this box?

  Thank you

  Jason

  I also had this problem. He was there at the beginning, and when I checked it, it gave me the error alert that I need to change 2 factor authentication. I did and then the box disappeared. I rebooted each device, etc... What worked was signing off iCloud desktop and then signing right back. Always a little nervous racking when you remove your contacts and calendars. But just make sure that you are supported, etc.