Symbol of the day before for iphone6

Similar Questions

• Set up the physics of the day before for Oracle Apps R12 database

  Hello
  I'll configure DR for EBS with db 11.1.0.7 12.1.3.
  Never done dataguard for oracle application.
  Check metalink and got a few documents.
  I am looking for all is self document or video tutorial so that it doesn't me more reliable to run more.

  PL follow the steps in this Doc MOS

  Business Continuity for Oracle E-Business release 12 using Oracle Database 11 g physical standby [ID 1070033.1]

  This is the official document and the more reliable - all other content is specific to this facility and may not be applicable in your case

  HTH
  Srini

• SP A60: As soon as the day before, why devices do not work?

  Hello

  A question on my Toshiba Satellite Pro A60 (P2.8GHz, 40 GB, Win XP Pro, delivered to the factory and expanded with Belkin 54 G wireless PC card network adapter).

  When the laptop awakens from the day before, several devices no longer work, for example the wireless network card. I have not found something to check (UN) Wake-On-Lan, resume, power management or something similar.

  After a full reboot, everything works fine again.

  What could I do to let all devices work the same after waking from standby?

  Thanks in advance for your answer.

  Kind regards
  Herman Zandt

  Hi, Herman

  I had the same situation, but I have found no solution for this problem. Just after the restart, it was OK again. It's really not easy to explain. You have this problem with the power supply or battery?

• How to change the power settings to activate the fan stops during the day before.

  Since my computer has turned off the fan in the standby mode.  Suddenly, after having entered the day before, the fan continues to run.

  Where can I set the power standby mode, so that the fan stops?

  You mention not likely this fan, case fan? That would be controlled by the drivers from your mobo, obtained from your mobo site

• Invite communications from the day before

  Hi All,

  EBS 11i

  9i

  RHEL5

  D OC 216212.1

  Section 3: Create the physical standby

  Step 6. Invite communications from the day before

  
  

  What is the mandatory part? Or I can still connect my apps even standby without running this.

  
  

  
  

  Thank you very much

  JC
  

  
  

  
  

  Hello;

  It is a security option. If it will work with your Setup, I would use it.

  Additional information:

  https://dba010.WordPress.com/2011/02/07/securing-the-Oracle-listener/

  Best regards

  mseberg

• SQL to retrieve data from the day before

  Hello

  I am asked to collect intelligence data and generate a daily report to determine the success rate (to do daily data that determines success rate). I have a session_time of column (with the DATE data type) that I try to do the job. I've been using:

  Select * from ABC

  where session_time > = TRUNC (SYSDATE - 2)

  Gives me data, but I get the data from 26/10/14 and 10/28/14 so when I only need data on 27-10-14 (as of the day 28/10/14). I tried a few variations and did not get the expected result. Could someone please help me understand this? Time is also displayed in my outings, maybe I shouldn't include the time?

  I use: TOAD for Oracle 11.5.1.2.

  Oracle Database 11g Enterprose 11.2.0.1.0 Edition

  Thank you in advance.

  Hello

  2632048 wrote:

  Hello

  I am asked to collect intelligence data and generate a daily report to determine the success rate (to do daily data that determines success rate). I have a session_time of column (with the DATE data type) that I try to do the job. I've been using:

  Select * from ABC

  where session_time > = TRUNC (SYSDATE - 2)

  Gives me data, but I get the data from 26/10/14 and 10/28/14 so when I only need data on 27-10-14 (as of the day 28/10/14). I tried a few variations and did not get the expected result. Could someone please help me understand this? Time is also displayed in my outings, maybe I shouldn't include the time?

  I use: TOAD for Oracle 11.5.1.2.

  Oracle Database 11g Enterprose 11.2.0.1.0 Edition

  Thank you in advance.

  Use:

  SELECT *.

  ABC

  WHERE session_time > = TRUNC (SYSDATE) - 1

  AND session_time<  trunc="">

  ;

  It's 09:15 on October 28, 2014, then TRUNC (SYSDATE - 2) is 00:00:00 October 26; The query you posted became data of October 26 and later.  (You may not all future dates in your table.)

  If it's 09:15 October 28, then TRUNC (SYSDATE) is 00:00:00 October 28 (i.e., midnight, at the beginning of October 28) and TRUNC (SYSDATE) - 1 is 00:00:00 October 27.

  Do not be tempted to use

  WHEN TRUNC (session_time) = TRUNC (SYSDATE) - 1 * INEFFECTIVE!  ***

  It will get the same results, but it is slower, you cannot use an index on session_time and requires a call to separate function for each row in the table, it is selected or not.

• How to create the day before

  Hello
  
  I am new to oracle, oracle11g installed on linux, intend to create/practice day before Oracle server.
  Please suggest a link which has config step by step.
  
  Thank you
  Mike.

  1000611 wrote:
  Hello

  I am new to oracle, oracle11g installed on linux, intend to create/practice day before Oracle server.
  Please suggest a link which has config step by step.

  Thank you
  Mike.

  Welcome to the DG oracle forum.

  see the link below.
  http://www.Oracle-base.com/articles/11g/Data-Guard-Setup-11gr2.php
  http://docs.Oracle.com/CD/B28359_01/server.111/b28282/configbp006.htm

• Move the data to another file system file - affects on the day before in a DG?

  If I want to move a file of data to another file system, because the current file system is full, I'd take the tablespace offline and unix, copy the data file to the new location and rename the tablespace to the new location.
  
  How would behave the night before in a dataguard environment? The DOF would apply, but could I take a tablespace offline space, waiting for read-only copy the data file on the unix sleep?

  Hello;

  I think that this would be ' rename a Datafile in the primary Database.

  If you don't rename the data corresponding to the watch system and then attempt to refresh the database backup control file, the standby database will attempt to use the data file renamed, but it will not enter into it. (the change is not propagated to the database pending)

  See Section 8.3.4 rename a data file in the primary database in the Document Oracle B14239-05 (Oracle10)

  This is a step by step on how to handle this.

  OR

  Chapter 9.3.4 rename a data file in the primary database in Oracle Document E10700-02 (Oracle 11)

  Best regards

  mseberg

  Published by: mseberg on December 1st, 2011 09:15

• Satellite U400D-201 - need for electricity from the day before

  Hello

  Toshiba does not provide XP drivers for laptop Turion based!
  I bought the laptop U400d-201 and spent ages running under XP.

  Still can't find Power Saver utility to work on my machine. I guess that not everything will work?

  Hello

  I m wondering that you want to install Windows XP on this laptop new and very fast. I think that Windows Vista works well on this laptop.
  I have a Satellite U400 (the same as you but with Intel CPU) with Vista 64 bit. I m very satisfied with this combination.

  In any case, I think that the drivers, you will need to collect on external Web sites. Maybe, you can find some drivers that they work on your laptop.

  On the energy-saving, I can suggest only you should try the U400. Maybe this works on your laptop too.
  But don t forget, maybe this tool is designed for Intel processors only

  Welcome them

• what point of time duplicate database for the DORECOVER of the day BEFORE

  Hello
  Please specify at what point in time option DORECOVER will recover standby base 10.2.0.3
  -at the beginning of the moment of the order duplicate
  -so far as archivelog are provided?
  -Another option :)
  Kind regards.
  Greg

  If you do not specify an UNTIL clause, it attempts to RECOVER up to the most recent ArchiveLog generated by the Production database (target). He knows because he connects to the target instance as well. (10 g, you will need to connect to the target).
  DUPLICATE a DATABASE error during RECOVERY if the last archivelog has not been copied to the standby server.
  Therefore, it would be good to be
  a. copy the archivelogs from production to the waiting
  OR
  b. specify an UNTIL clause

  Hemant K Collette

• Data hold seem to be OK but cannot open the day before

  I configured the data pending physical guard on Red hat with Oracle 11.2. I followed the doc

  http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10g_RACPrimarySingleInstancePhysicalStandby.pdf

  . Things went smoothly and after replication completed and created satndby rego log on the satndby I ran

  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;

  Then tried to open the database pending, but received the error

  SQL> alter database open;
  alter database open
  *
  ERROR at line 1:
  ORA-10456: cannot open standby database; media recovery session may be in progress

  I checked the views of gollowing for the status of the DG

  SQL> select thread#, max(sequence#) "Last Primary Seq Generated" from v$archived_log
   group by thread# order by 1;
    2
     THREAD# Last Primary Seq Generated
  ---------- --------------------------
           1                       1372
           2                        803
           3                        788

  The same result in the primary and standby.

  SQL> select recid,SEQUENCE#,blocks,APPLIED,status,first_chg_time,completed from (
    2  SELECT recid,SEQUENCE#,name log_name,blocks,APPLIED,status,
    3   to_char(first_time,'mmdd-hh24miss') first_chg_time,
    4   to_char(completion_time,'mmdd-hh24miss') completed
    5   FROM V$ARCHIVED_LOG where first_time< sysdate+1 ORDER BY SEQUENCE# desc,1
    6  ) where rownum<16;
  
       RECID  SEQUENCE#     BLOCKS APPLIED   S FIRST_CHG_T COMPLETED
  ---------- ---------- ---------- --------- - ----------- -----------
           2       1372       5264 YES       A 0517-033143 0517-034827
           1       1371       1382 YES       A 0517-032616 0517-034827
           8       1370      19913 YES       A 0517-024906 0517-035620
           7       1369       3264 YES       A 0517-023805 0517-035619
           4        803       1680 NO        A 0517-033144 0517-034828
           6        802        686 YES       A 0517-032617 0517-034924
          10        801       7096 YES       A 0517-024906 0517-035621
           9        800       1080 YES       A 0517-023806 0517-035620
           3        788       1565 NO        A 0517-033144 0517-034828
           5        787        488 YES       A 0517-032616 0517-034921
          12        786       6644 YES       A 0517-024906 0517-035622
          11        785       1486 YES       A 0517-023806 0517-035622

  Note that the # 1372 sequence has been applied but 788 and 803 are not

  select facility,severity,message_num msg_num,timestamp,message from v$dataguard_status order by TIMESTAMP desc
  ) where rownum<20;
    2    3
  FACILITY                 SEVERITY         MSG_NUM TIMESTAMP     MESSAGE
  ------------------------ ------------- ---------- ------------- -------------------------------------------------------
  Log Apply Services       Warning               74 0517 03:56:26 Media Recovery Waiting for thread 1 sequence 1373 (in t
                                                                  ransit)
  
  Log Apply Services       Informational         68 0517 03:56:25 Media Recovery Log /u01/flash/flashback_recovery_area/C
                                                                  CHDR/archivelog/2010_05_17/o1_mf_1_1371_5z20ptt7_.arc

  Here the sequence 1373 is in transfer. But 1372 is exists even in the primary according to the result of the query 1. I waited for 20 minutes is not yet done. I can not open the database.
  
  What else can I do to open the database?

  To open the standby database in read only mode, run the SQL statement on the physical standby server
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  SQL > ALTER DATABASE OPEN READ-ONLY.
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT LOG FILE USING CURRENT;

  You must cancel the recovery process before opening the database.

  Kind regards
  Sudhir

• Email of the day before being removed or deleted from the Inbox when you restart?

  Emails from my previous day's class 'abducted' of the 'box '. They do not appear in the "Deleted" folder or in the windows 'Recycle Bin '. I use a desktop computer & any other device. I have checked and re - check on the internet and nothing doesn't seem to refer to the problem. I'm a surfer of money with a little savvy & unafraid of have-a-go to any help anyone can offer. Thank you in advance.

  First option

  View menu > discussions > all

• M400: I have solved the problems of the day before

  Hello

  I suffered all the problems on IE locks, don't not recovery from sleep mode and sometimes of hibernation and the continuous fan running.

  After changing things like crazy, I think I have solved at least sleep mode and hibernation, problems of updating the chipset and the Intel's IDE software. You can install it on top of Toshiba drivers with no problems.

  Chipset: http://support.intel.com/support/chipsets/inf/
  Storage: http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=2101

  But I was unable to update Intel video driver, as any method I have chosen to do so tells me an incompatible driver, asking me to contact the OEM manufacturer.

  LUIS

  Hi Luis

  Thanks for the comments and info. I hope this can help other owners Portege.

  Good luck!

• Where the day before on a 700 wireless keyboard?

  I bought a Wireless deskset, 700, worm. 2 and cannot find a way to tell the computer in standby mode.  My OS is XP, sp3.  The keyboard has an A on the cap lock key and a 1 press the locking num without explanation.  No documentation in the instructions.

  The caps lock has a capital ("capital") Letter A, and the NumLock key is the graphical number '1' as a reminder (i.e., an icon) what do the keys.

  When the caps lock shift key is enabled, you press a button any alphabetical gives the corresponding uppercase letter.  There is usually a light top right of the keyboard that lets you know when caps lock is "on".

  The NumLock key is similar.  See this:

  The NumLock key exists because keyboards from PC of IBM 84 previous keys had no separate numeric keypad arrows. Num Lock to choose between the two functions. ... Given that most modern desktop computers have a keyboard full size with a paved digital and arrow keys separate, Num Lock is rarely used for its original purpose and ends up confusing the user if it is for a reason any activated unless the user is aware of this.

  As with the Caps Lock key, there is usually a light indicating if NUMLOCK is 'on '.
  Some Microsoft keyboards have a "Sleep" button, and some do not.  If your keyboard does not have a sleep key, you can install IntelliType (which can be entered the CD with your keyboard or download it here) or AutoHotKey and assign a function to a button of your choice.

  There are several ways to put your computer into standby mode, it is probably easier to use the command line feature of Show Stopper of Karen.

• No sound on the awakening of the day before, screen problems

  When I wake up my laptop in standby or hibernation, I have no sound. When I check the Device Manager it is there no audio device detected. When I wake up, the screen has a bunch of white lines on it for a while, that finally clears. Both of these problems appeared at the same time a month ago. I don't know if this has to do with an update that I had some time, some kind of virus, or something else. AVG detects no virus. When I restart, all right. I'm running Windows 7 on a Toshiba Satellite A215-S4697 with plant material (except the RAM, I've updated).

  Have you visited site Tosh, specific to your model, and check updates of pilot?